Table 1.
Processing parameters of the tensile test samples.
| Printing Parameters | Batch 1 | Batch 2 | Batch 3 | Batch 4 |
|---|---|---|---|---|
| Material | PA-ZrO2 | PA-ZrO2 | PA-Al2O3 | PLA |
| Nozzle diameter (mm) | 0.4 mm | 0.8 mm | 0.8 mm | 0.8 mm |
| Layer thickness (mm) | 0.2 mm | 0.2 mm | 0.2 mm | 0.2 mm |
| Build orientation | z (vertically) | x (horizontally) | x (horizontally) | x (horizontally) |
| Infill density | 90% | 100% | 100% | 100% |
| Infill pattern | Linear (+45°/−45°) | Linear aligned (0°) | Linear aligned (0°) | Linear aligned (0°) |
| Outer layers | 2 | 2 | 2 | 2 |
| Extruder temp. (°C) | 230–255 °C (5 °C increments) | 250 °C | 250 °C | 210 °C |