Table 2.

Summary of the spherulite size and crystallinity measurements of LDPE injection-molded specimens.

Injection Molding Condition (Melt–Mold)	Spherulite		Crystallinity
	Average Size (μm)	Std. Dev. (μm)	Ratio (A/C)	X (%)
120–10	7.03	1.80	0.26	31.5
120–40	6.87	2.17	0.26	29.8
120–80	6.64	2.68	0.27	31.5
140–10	11.46	3.53	0.27	33.6
140–40	8.39	2.30	0.26	33.9
140–80	7.76	2.18	0.26	32.2
160–10	10.88	4.32	0.26	33.5
160–40	6.28	2.25	0.26	31.4
160–80	8.35	2.34	0.28	31.7