Table 2.

Printing configurations used on each standard mechanical test. All samples were printed with a 0 mm air gap (solid), one contour raster, and normal surface style. See Figure 2 for orientation details.

Configuration	Printing Orientation	Sample Orientation	Raster Angle (°)
1	X	Flat	0
2	X	Flat	±45
3	X	Flat	90
4	X	Edge	0
5	X	Edge	±45
6	X	Edge	90
7	Z	Flat	0
8	Z	Flat	±45
9	Z	Flat	90