Skip to main content
. 2021 Nov 3;13(21):3806. doi: 10.3390/polym13213806

Figure 12.

Figure 12

MTT assay for cells after contact with 3D-printed/electrospun ellipsoidal (I) and square (II) composites. A control sample is a composite prepared without cover over the surface of 3D-printed pieces with fibers; and A-D are those prepared with PLA-based fibers: (A) PLA10, (B) PLA/PEG, (C) PLA/PEG/2.5HA, and (D) PLA/PEG/5.0HA.