Skip to main content
. 2021 Dec 16;11:24081. doi: 10.1038/s41598-021-03212-z

Table 10.

Some of the physical properties of DESs (binary mixtures) used in the work at 298.15 K and pressure (p = 871 hPa).

Molar ratio Melting Point (K) Water content (w%) Molar mass (g mol-1)a T / K ρ / g cm-3 (Exp) ρ / g cm-3 (Lit) u / m s-1 (Exp) u / m s-1 (Lit)
ChCl:EG 1:2 207.1530  < 0.01% 87.921 298.15 1.115551 1.11561631 1909.20 1909.6531
1.13832 1911.0430
1905.133
303.15 1.112750 1.11271531 1897.43 1897.4831
1894.033
1885.63 191432
308.15 1.109927 1.10992731 1886.0831
1882.833
313.15 1.107151 1.108434 1873.86 188232
1.105735 1871.833
318.15 1.104361 1.1052936 1861.58 1860.733
ChCl:Gly 1:2 233.1530 0.06% 107.937 298.15 1.186358 1.192037 2012.42 2012.5930
1.1908538
1.18132
1.1957539 2001.2939
303.15 1.183556 1.189537 2001.05 208032
1.1880738
1.1929039 1990.2339
308.15 1.180849 1.186737 1989.90
1.1852838
1.1901539 1979.2439
313.15 1.178128 1.183837 1978.98 197632
1.1824938
1.1874039 1968.3039
318.15 1.175437 1.181437 1967.90
1.1797038
1.1846539 1957.3839

Standard uncertainties (u) for each variable are u (T) = 0.001 K; u (p) = 10 hPa.

The combined standard uncertainty for the average of n density measurements u (ρ) = 0.015 kg m-3 and speed of sound u (u) = 1 m s-1.

Standard uncertainty (u) for DESs composition was estimated to be less than 5·10–2 mol ratio.

a Molar mass of DESs = x1 M1 + x2 M2.

x1 and M1; mole fraction and molar mass of ChCl.

x2 and M2; mole fraction and molar mass of HBD.

The melting point is expressed for the solidus (formation of the first liquid) or liquids (disappearance of last crystals).

The density and speed of sound were measured for the liquid state of the prepared DESs.