Table 1.
Detection rate (%) | LOD | GMa | GSDa | Percentiles | ||||
---|---|---|---|---|---|---|---|---|
Min | P33 | P66 | Max | |||||
MPS baseline | ||||||||
BPA | 83.0 | 0.4 | 1.39 | 2.84 | <LOD | 0.83 | 2.10 | 76.81 |
BPF | 73.7 | 0.4 | 0.99 | 2.86 | <LOD | 0.53 | 1.41 | 56.87 |
2,4-diclorophenosl | 98.6 | 0.2 | 3.68 | 4.23 | <LOD | 1.75 | 5.35 | 1,168.05 |
2,5-diclorophenosl | 99.8 | 0.2 | 12.79 | 5.63 | <LOD | 4.73 | 18.52 | 6,942.46 |
Triclosan | 81.1 | 2.0 | 17.23 | 5.94 | <LOD | 5.97 | 35.40 | 2,468.05 |
Methyl-paraben | 99.8 | 1.0 | 130.47 | 4.66 | <LOD | 79.64 | 297.26 | 4,440.59 |
Ethyl-paraben | 60.5 | 1.0 | 3.91 | 6.23 | <LOD | <LOD | 5.98 | 1,218.74 |
Propyl-paraben | 97.8 | 0.2 | 22.64 | 6.88 | <LOD | 10.29 | 60.53 | 1,895.33 |
Butyl -paraben | 54.4 | 0.2 | 0.79 | 6.83 | <LOD | <LOD | 1.22 | 274.76 |
Benzophenone-3 | 97.7 | 0.4 | 24.01 | 12.18 | <LOD | 4.57 | 69.42 | 21,493.4 |
MPS follow-up visit 3 | ||||||||
BPA | 93.4 | 0.4 | 1.77 | 2.40 | <LOD | 1.21 | 2.40 | 333.35 |
BPF | 80.6 | 0.4 | 1.11 | 2.64 | <LOD | 0.71 | 1.47 | 86.32 |
2,4-diclorophenosl | 99.0 | 0.2 | 2.01 | 3.53 | <LOD | 1.06 | 2.35 | 902.32 |
2,5-diclorophenosl | 99.3 | 0.2 | 7.92 | 5.50 | <LOD | 3.06 | 11.37 | 4,447.77 |
Triclosan | 82.9 | 2.0 | 16.04 | 5.57 | <LOD | 6.41 | 25.99 | 13,315.6 |
Methyl-paraben | 99.6 | 1.0 | 128.93 | 4.61 | <LOD | 81.02 | 269.30 | 11,504.7 |
Ethyl-paraben | 60.9 | 1.0 | 4.37 | 5.78 | <LOD | <LOD | 6.97 | 2,054.10 |
Propyl-paraben | 98.4 | 0.2 | 19.17 | 6.74 | <LOD | 8.67 | 55.86 | 2,760.12 |
Butyl-paraben | 59.3 | 0.2 | 0.95 | 6.91 | <LOD | <LOD | 1.70 | 423.29 |
Benzophenone-3 | 97.7 | 0.4 | 33.28 | 11.82 | <LOD | 7.72 | 92.09 | 41,715.0 |
aGeometric mean and geometric standard deviation was calculated after substituting values below LOD with LOD/√2.
GM, geometric mean; GSD, geometric standard deviation; LOD, limit of detection; MPS, multipollutant study.