Table 6.
Simulation results of the Strehl ratio that considered the tolerances of the mold in the cases of wearing glasses.
| Surface | Tolerance (%) | Anterior Radius (Ry) (mm) | Posterior Radius (Ry) (mm) | Strehl Ratio | |
|---|---|---|---|---|---|
| P407DA/PHEMA | Biconic | +1 | 7.48208 | 6.57005 | 0.139 |
| ±0 | 7.408 | 6.505 | 0.857 | ||
| −1 | 7.33392 | 6.43995 | 0.142 | ||
| Aspherical | +1 | 7.48107 | 6.59833 | 0.029 | |
| ±0 | 7.407 | 6.533 | 0.496 | ||
| −1 | 7.33293 | 6.46767 | 0.046 | ||
| Spherical | +1 | 7.50228 | 6.54379 | 0.034 | |
| ±0 | 7.428 | 6.479 | 0.403 | ||
| −1 | 7.35372 | 6.41421 | 0.084 | ||
| P407DA/PAA | Biconic | +1 | 7.59116 | 6.11252 | 0.14 |
| ±0 | 7.516 | 6.052 | 0.86 | ||
| −1 | 7.44084 | 5.99148 | 0.142 | ||
| Aspherical | +1 | 7.64772 | 6.92052 | 0.031 | |
| ±0 | 7.572 | 6.852 | 0.499 | ||
| −1 | 7.49628 | 6.78348 | 0.051 | ||
| Spherical | +1 | 7.67095 | 6.88618 | 0.033 | |
| ±0 | 7.595 | 6.818 | 0.371 | ||
| −1 | 7.51905 | 6.74982 | 0.092 |