Table 4.
Electrical connections required to run the FPGA program
| Signal | Connector |
|---|---|
| Writing the PMT | |
| Positive power supply (+5 V) | Connector0/AO3 |
| Positive power supply (−5 V) | Connector0/AO4 |
| Sensitivity (0.5–1.1 V) | Connector0/AO5 |
| Control pulse | |
| Pulse sent to the external trigger of the waveform generator | Connector0/AO1 |
| Reading the PMT | |
| Input port used to graph the PMT signal | Connector0/AI1 |
| Reading simulated signal | |
| Input port used to graph the simulated signal | Connector0/AI2 |
Note: All electrical connections within the FPGA are here provided. By wiring these connectors adequately, one can run the LabVIEW FPGA programs described in Figures S2–S5. FPGA, field programmable gate array; PMT, photomultiplier tube.