Table 1.

Printing parameters of the SLM process for the training and validation set.

Printing Parameters for the Training Set
		Laser Power
		120 W	140 W	160 W
Spot size	45 μm	P1	P2	P3	Scan speed = 900 mm/s
	60 μm	P4	P5	P6
	75 μm	P7	P8	P9
	45 μm	P10	P11	P12	Scan speed = 1000 mm/s
	60 μm	P13	P14	P15
	75 μm	P16	P17	P18
	45 μm	P19	P20	P21	Scan speed = 1100 mm/s
	60 μm	P22	P23	P24
	75 μm	P25	P26	P27
Printing Parameters for the Validation Set
Specimens ID	Laser Power (W)		Scan Speed (mm/s)		Spot Size (μm)
P28	130		950		50
P29	130		950		55
P30	130		1050		65
P31	130		1050		70
P32	150		950		50
P33	150		950		55
P34	150		1050		65
P35	150		1050		70
P36	135		1025		52
P37	155		975		67