Table 2. Detailed Photovoltaic Parameters of the J–V Characteristics Shown in Figure 6 and Reference DSSCs Assembled Using the Dye N719^a.

dye	η (%)	VOC (mV)	JSC (mA cm–2)	FF (%)
[Cu(dbda)2]+	1.17 ± 0.09	550 ± 10	2.87 ± 0.10	74 ± 2
[Cu(dbda)(dmp)]+	1.38 ± 0.10	563 ± 5	3.31 ± 0.12	74 ± 2
[Cu(dbda)(Br-dmp)] +	1.23 ± 0.10	555 ± 5	3.17 ± 0.11	70 ± 1
[Cu(dbda)(dsbtmp)]+	1.81 ± 0.12	563 ± 5	4.79 ± 0.11	68 ± 1
[Cu(dbda)(bcp)]+	2.05 ± 0.08	565 ± 10	4.79 ± 0.07	73 ± 1
[Cu(dbda)(biq)]+	1.24 ± 0.09	553 ± 5	3.35 ± 0.09	67 ± 2
[Cu(dbda)(dap)]+	1.73 ± 0.09	566 ± 5	4.16 ± 0.10	72 ± 1
N719	7.60 ± 0.21	700 ± 5	17.81 ± 0.09	61 ± 1

^aThe values originate from three DSSCs of each type investigated 2 days after assembly. Electrolyte 1 (Figure 5) was used.