Table 2.
DSC and TGA parameters of each printed sample.
| Sample | Tg (°C) |
Tcc (°C) |
Tm (°C) |
T5% (°C) |
Tmax (°C) |
T95% (°C) |
|---|---|---|---|---|---|---|
| PLA (control) | 64.4 | 114.2 | 150.5 | 348.6 | 380.6 | 402.8 |
| PLA 3D printed | 57.7 | 112.0 | 150.1 | 330.4 | 365.0 | 385.0 |
| PLA-MH | 57.6 | - | 152.3 | 353.5 | 383.5 | 404.5 |
| PLA-DH | 54.1 | - | 151.2 | 342.5 | 380.0 | 392.9 |
| PETG (control) | 80.0 | - | - | 340.8 | 438.8 | >700 |
| PETG 3D printed | 76.5 | - | - | 377.5 | 433.5 | >700 |
| PETG-MH | 84.3 | - | - | 414.0 | 458.5 | >700 |
| PETG-DH | 85.0 | - | - | 383.0 | 453.0 | >700 |
| CPE (control) | 83.7 | - | - | 406.2 | 439.0 | >700 |
| CPE 3D printed | 81.1 | - | - | 396.0 | 428.5 | >700 |
| CPE-MH | 76.2 | - | - | 407.5 | 443.2 | >700 |
| CPE-DH | 88.9 | - | - | 406.5 | 444.0 | >700 |