Skip to main content
. 2022 Jan 17;9(8):2104623. doi: 10.1002/advs.202104623

Figure 7.

Figure 7

Photocuring‐based 3D printing. a) Schematic illustration of the stereolithography (SLA). b) Photographs of actuator fabricated using the SLA method. c) Photographs of gyroid architecture for use as a tissue scaffold. d) Schematic illustration of the DLP. e) Photographs of the printed honeycomb‐shaped sample with the photopolymer. f) Schematic illustration volumetric DLP printing methods. g) “Rodin's The Thinker” 3D‐printed by DLP. Scale bar, 10 mm. h) Photograph of sequential view of the build volume during the print. Scale bar, 10 mm. i) Schematic illustration of the experimental setup for TPP. j) SEM of “Tokyo Skytree” by using TPP. k) SEM of cell scaffolds array. Scale bar, 25 µm. a) Reproduced with permission.[ 125 ] Copyright 2020, MDPI. b) Reproduced with permission.[ 126 ] Copyright 2019, American Chemical Society. c) Reproduced with permission.[ 127 ] Copyright 2009, Elsevier. d) Reproduced with permission.[ 128 ] Copyright 2018, Wiley‐VCH. e) Reproduced with permission.[ 129 ] Copyright 2019, American Chemical Society. f) Reproduced with permission.[ 132 ] Copyright 2019, The American Association for the Advancement of Science. g) Reproduced with permission.[ 132 ] Copyright 2019, The American Association for the Advancement of Science. h) Reproduced with permission.[ 132 ] Copyright 2019, The American Association for the Advancement of Science. i) Reproduced with permission.[ 139 ] Copyright 2012, Laser Institute of America. j) Reproduced with permission.[ 140 ] Copyright 2013, Springer Nature. k) Reproduced with permission.[ 141 ] Copyright 2021, Elsevier.