Figure - PMC

Skip to main content

An official website of the United States government

Here's how you know

Here's how you know

Official websites use .gov
A .gov website belongs to an official government organization in the United States.

Secure .gov websites use HTTPS
A lock ( ) or https:// means you've safely connected to the .gov website. Share sensitive information only on official, secure websites.

View full-text article in PMC

. 2022 May 5;8:13. doi: 10.1186/s41205-022-00139-7

Search in PMC
Search in PubMed
View in NLM Catalog
Add to search

© The Author(s) 2022

Open AccessThis article is licensed under a Creative Commons Attribution 4.0 International License, which permits use, sharing, adaptation, distribution and reproduction in any medium or format, as long as you give appropriate credit to the original author(s) and the source, provide a link to the Creative Commons licence, and indicate if changes were made. The images or other third party material in this article are included in the article's Creative Commons licence, unless indicated otherwise in a credit line to the material. If material is not included in the article's Creative Commons licence and your intended use is not permitted by statutory regulation or exceeds the permitted use, you will need to obtain permission directly from the copyright holder. To view a copy of this licence, visit http://creativecommons.org/licenses/by/4.0/. The Creative Commons Public Domain Dedication waiver (http://creativecommons.org/publicdomain/zero/1.0/) applies to the data made available in this article, unless otherwise stated in a credit line to the data.

PMC Copyright notice

Fig. 7 — A-D The third version of the printed model, created by using SLA-printing-technology. Used 3D printer: SparkMaker Original from the company SparkMaker, Shenzhen, China. The liquid resin used was Colored UV Resin from the company ANYCUBIC, Shenzhen, China. B Black arrow: the false insertion of the suspensory ligament of ovary could be corrected, now ending in the air. C Because of the relatively small size of the printer’s building area of 98, 6 × 55, 4 mm and building height of 125 mm, this model is relatively small. D Black arrows show a flaw in the print of the base plate. As the print of the vulva failed, one can directly see the urethral, vaginal and anal orifice in the base plate