Skip to main content
. 2022 May 21;121(1-2):785–803. doi: 10.1007/s00170-022-09376-w

Fig. 3.

Fig. 3

Typical tensile stress (MPa) to strain (mm/mm) curves of tensile specimens’ 3D printed with infill’s extrusion orientation of 45° and for all tested nozzle’s temperatures for A PA12-TiO2 1.0 wt.%, B PA12-TiO2 2.0 wt.%, and C PA12-TiO2 4.0 wt.%