Table 6.
Required lap splice length.
| ID | ld,rqd | ld,ACI | ld,KICT | ld,EC2 | ld,AFGC | ld,specimen |
|---|---|---|---|---|---|---|
| (mm) | ||||||
| 120-15db-0 | 442 | 612 | 390 | 932 | 715 | 330 |
| 120-10db-0 | 379 | 220 | ||||
| 120-5db-0 | 322 | 110 | ||||
| 180-15db-0 | 427 | 500 | 318 | 870 | 572 | 330 |
| 180-10db-0 | 359 | 220 | ||||
| 180-5db-0 | 278 | 110 | ||||
| 120-10db-V1.5 | 269 | 612 | 390 | 932 | 200(116) | 220 |
| 120-5db-V1.5 | 219 | 110 | ||||
| 180-10db-V2.0 | 235 | 500 | 318 | 870 | 181(102) | 220 |
| 180-5db-V2.0 | 160 | 110 | ||||
| 180-5db-V1.5 | 130 | 181(95) | 110 | |||
| 180-10db-V1.0 | 291 | 196(160) | 110 | |||
| 180-5db-V1.0 | 194 | 110 | ||||
ld,rqd: required lap-spliced length calculated by using bond stress calculated by test results, ld,ACI, ld,KICT, ld,EC2, ld,AFGC: lap-spliced length calculated by using code provisions (KCI, KICT, EC2, AFGC), ld,specimen: lap-spliced length of test specimens.