Skip to main content
. 2022 Jun 12;15(12):4162. doi: 10.3390/ma15124162

Figure 2.

Figure 2

Calibration models printed on the VORON model 2.4 printer. Filament printout: (a) material in the test model with the composition of 700 g PC/5 g PO/3.5 g talc and (b) material in the test model with the composition 700 g PC/5 g PO/3.5 g talc, additionally free of water using the ChemLand DZ dryer -3BCII.