Table 1.

Specimens’ manufacturing parameters.

Number of Set	Temperature (PET-G/PLA), °C	Infill, %	Infill Type	Layer Height (mm)	Printing Orientation
1	210/180	25	triangle	0.20	XY
2	220/190
3	230/200
4	240/210
5	250/220
6	230/200	25	cubic	0.20	XY
7			line
8			triangle
9		0	line	0.20	XY
10		25
11	230/200	50
12		75
13		100
14				0.12	XY
15	230/200	25	triangle	0.20
16				0.28
17	230/200	25	triangle	0.2	XY
18					XZ
19					YZ