Subject	Chemical Engineering
Specific subject area	photopolymerization, additive manufacturing, ionic liquids, dual curing resins.
Type of data	text file, graph, figure
How the data were acquired	Differential scanning calorimetry (DSC) was performed on Netzsch DSC214 Polyma.The FTIR spectra were acquired on the Bruker Tensor-27 spectrophotometer.
Data format	RawAnalyzed
Description of data collection	Primary data were collected via operational software with the instruments/manufacturers introductions. Data were processed using Origin 2020b 64Bit, for purposes of data analysis and diagram presentation.Dynamic DSC was performed in a nitrogen atmosphere with a heating rate of 10°C/min.Photo-DSC was performed with an irradiation intensity of 5 mW/cm2 measured at 405 nm.The FTIR spectra were acquired in the range of 4000-400 cm−1 from 64 scans at a resolution of 1 cm−1.
Data source location	Lomonosov Moscow State University, Moscow, Russia
Data accessibility	Repository name: Mendeley DataData identification number: 10.17632/nd6fd96wnt.3Direct link to the dataset: https://data.mendeley.com/datasets/nd6fd96wnt/2
Related research article	S. Nechausov, A. Ivanchenko, O. Morozov, A. Miriyev, and I. Must, “Effects of ionic liquids and dual curing on vat photopolymerization process and properties of 3d-printed ionogels,” vol. 56, no. May, 2022, doi: 10.1016/j.addma.2022.102895.