Skip to main content
. 2022 Jul 8;222:109358. doi: 10.1016/j.buildenv.2022.109358

Table 4.

Boundary conditions of simulation cases.

Boundary Type Conditions
Inlet Velocity-inlet Uniform velocity profile (with inlet CO2 concentration of 450 ppm)
Outlet Outflow
Front and rear Symmetry
Top Wall Non-slip wall, heat transfer coefficient of 16 W/(m2•K), thermal conductivity of 0.11 W/(m·K), wall thickness of 25 mm
Lateral Wall Non-slip wall, heat transfer coefficient of 16 W/(m2•K), thermal conductivity of 0.44 W/(m·K), wall thickness of 100 mm
Floor Wall Non-slip wall, heat transfer coefficient of 16 W/(m2•K), thermal conductivity of 0.11 W/(m·K), wall thickness of 25 mm