Table 6.
Water sorption and solubility Results.
| Author and Year | Water Sorption of Conventional Cured Resin | Water Sorption of CAD/CAM Milled Resin | Water Sorption of 3D-Printed Resin | Solubility of Conventional Cured Resin | Solubility of CAD/CAM Milled Resin | Solubility of 3D-Printed Resin | Authors Suggestions/Conclusions |
|---|---|---|---|---|---|---|---|
| Shin et al., 2020 [28] |
N/A | (A) Polycarbonate block: 0.43% (B) Vipi block (PMMA): 1.45% (C) MAZIC Duro (DFC): ≅0.88% |
(D) Nextdent C&B: 1.04% (E) Denture teeth A2 Resin: 1.21% |
N/A | (A) Polycarbonate block: 0.12% (B) Vipi block (PMM(A) ≅0.34% (C) MAZIC Duro (DFC): = 0.07% |
(D) Nextdent C&B: 0.53% (E) Denture teeth A2 Resin: 0.47% |
Water sorption: Conventional PMMA > 3D-Printed Denture teeth A2 Resin > 3D-Printed PMMA > Conventional Polycarbonate > Conventional DFC Water Solubility: 3D-Printed PMMA > 3D-Printed Denture teeth A2 Resin > Conventional Vipi block PMMA > Conventional DFC > conventional Polycarbonate |
| Song et al., 2020 [4] | (A) Alike: 32.23 ± 5.93 (B) Luxatemp Automix plus: 14.15 ± 1.30 |
(C) PMMA Disk: 23.16 ±1.25 (D) Telio CAD: 19.13 ± 1.41 |
(E) VeroGlaze: 35.02 ± 1.43 (F) E-dent 100: 20.08 ± 2.27 |
In μgm/mm3 (A) Alike: 3.54 ± 1.81 (B) Luxatemp Automix plus: 0.38 ± 0.56 |
In μgm/mm3 (C) PMMA Disk: 0.84 ± 0.61 (D) Telio CAD: 0.97 ± 0.47 |
In μgm/mm3 (E) VeroGlaze: 0.52 ± 0.80 (F) E-dent 100: 2.78 ± 1.49 |
Water sorption: Conventional PMMA > 3D-printed photopolymer > CAD/CAM Milled (PMMA Disk) > 3D-Printed acrylic > CAD/CAM milled PMMA > Conventional bis-acrylic. Water Solubility: Conventional PMMA & 3D-printed acrylic > 1 μg/mm3. For other four groups <1 μg/mm3. |
N/A: Not Applicable.