Table 1.

Characteristics of FDM printings at Simplify 3D slicer. DB- and RB- samples, are tensile test and bending test samples.

		Tibial endo-prosthesis	DB- and RB- samples
N° Models each printing		2 (40 mm distance between them)	1
Extrusion multiplier		0.92	0.92
Layer height (mm)		0.05	0.05
Skirt	Layer	1	1
	Skirt outlines	15	15
Infill (%)		50	50
Speed	Default (mm/s)	30	30
	Outline underspeed (%)	50	50
	Solid infill underspeed (%)	80	80
	Supports underspeed (%)	80	80