TABLE 2.
Primary and secondary outcomes of included studies (na, not applicable)
| Manufacturing time | Effectiveness | Costs | |||
|---|---|---|---|---|---|
| Preparation | CAM | Post‐processing | |||
| Di Fiore et al. (2018) | n.a. | n.a. | n.a. | Time for chairside adjustments | n.a. |
| Joda and Bragger (2014) | n.a. | n.a. | n.a. | Number of crowns in need of chairside | Total laboratory costs |
| Joda and Bragger (2015) |
CAD model CAD customized abutment CAD crown coping |
n.a. |
Ceramic veneering glazing and polishing |
Time for chairside adjustments | n.a. |
| Joda and Bragger (2016) |
CAD model CAD monolithic crown |
n.a. |
Assembly of components polishing |
Time for chairside adjustments | Total laboratory costs |
| CAD customized abutment |
Veneering glazing and polishing |
||||
| Mangano, Margiani, et al. (2019) | n.a. | n.a. | n.a. | Number of crowns in need of chairside and laboratory adjustments | n.a. |
| Mangano and Veronesi (2018) |
CAD customized abutment CAD monolithic crown |
Subtractive |
Sintering assembly of components staining |
n.a. |
Customized abutment Monolithic crown staining |
| Mangano, Mangano, et al. (2019) | n.a. | n.a. | n.a. | Number of 3D‐printed prototype bars with passive fit | n.a. |
| Pan et al. (2019) | CAD monolithic crown | n.a. | n.a. |
Time for chairside adjustments Number of crowns in need of chairside and laboratory adjustments |
n.a. |
| Zhang, Qiu, et al. (2019) | CAD monolithic crown | subtractive | Fitting and staining |
Time for chairside adjustments Number of crowns in need of chairside and laboratory adjustments |
n.a. |
| CAD crown coping |
Sintering veneering |
||||