TABLE 4.
Manufacturing time for single implant crowns by means of s‐CAM
| Preparation task | Time (min) | s‐CAM | Time (min) | Post‐processing | Time(min) | |
|---|---|---|---|---|---|---|
| Digital workflow applying centralized s‐CAM | ||||||
| Joda and Bragger (2015) |
CAD model CAD customized abutment CAD crown coping |
4.9 32.7 37.6 |
n.a. |
Ceramic Veneering glazing and polishing |
71.4 11.5 |
|
| Joda and Bragger (2016) |
CAD model CAD monolithic crown |
11.8 22.3 |
n.a. |
Assembly of components Polishing |
5.0 15.4 |
|
| CAD customized abutment | 19.7 |
Veneering Glazing and polishing |
74.7 28.8 |
|||
| Zhang, Qiu, et al. (2019) | CAD crown coping | 11.1 | Milling zirconia crown coping | 8.2 |
Sintering Veneering |
530.0 89.9 |
| Digital workflow applying laboratory s‐CAM | ||||||
| Mangano and Veronesi (2018) |
CAD customized abutment CAD monolithic crown |
30.0 10.0 |
Milling zirconia abutment/crown | 25.0 |
Sintering assembly of Components staining |
480.0 10.0 10.0 |
| Pan et al. (2019) | CAD monolithic crown | 12.6 | n.a. | n.a. | ||
| Digital workflow applying chairside s‐CAM | ||||||
| Zhang, Qiu, et al. (2019) | CAD monolithic crown | 28.9 | Milling lithium disilicate crown | 21.4 | Fitting and staining | 40.2 |