. 2022 Jul 7;4(8):5457–5470. doi: 10.1021/acsapm.2c00531

Table 4. Average Values of Young’s Modulus (E), Tensile Strength at Break (TS_b), and Elongation at Break (E_b) Obtained through Mechanical Property Analysis of 3D Printed Ring Pieces Consisting of the Different Biomaterial Ink Compositions^a.

composition	avg. Young’s modulus, E/MPa	avg. tensile strength at break,TS_b/MPa	avg. elongation at break, E_b/%
50/50	1.22 ± 0.01	0.163 ± 0.010	15.44 ± 0.05
60/40	0.75 ± 0.05	0.093 ± 0.046	21.06 ± 9.60
70/30	0.70 ± 0.06	0.080 ± 0.101	18.34 ± 2.08
80/20	0.89 ± 0.03	0.103 ± 0.008	32.98 ± 8.49
90/10	0.05 ± 0.22	0.007 ± 0.010	30.57 ± 6.46
95/5	0.05 ± 0.15	0.016 ± 0.016	55.90 ± 5.44
100/0 (100% POMaC)	0.12 ± 0.19	0.030 ± 0.034	44.83 ± 1.62

Average values of TS_b and E_b are defined as per ISO-37.⁵⁰ Values are mean ± standard deviation.

Table 4. Average Values of Young’s Modulus (E), Tensile Strength at Break (TSb), and Elongation at Break (Eb) Obtained through Mechanical Property Analysis of 3D Printed Ring Pieces Consisting of the Different Biomaterial Ink Compositionsa.