Table 1.

Printer Settings in Cura 2.3.1

Setting	Level
Nozzle temperature	250°C
Bed temperature	60°C
Layer	0.1 mm
Infill	100%
Retraction	Enabled
Z-hop	Disabled
Print speed	25 mm/s
Outer wall speed	15 mm/s
Travel speed	100 mm/s
Print acceleration	1000 mm/s2
Travel acceleration	1000 mm/s2
Fan speed	40%
Support	Disabled
Skirt	Enabled
Skirt line count	4
Skirt distance	0.4 mm