Table 4.
Characteristics of the applied filler metals.
| Sample No. | Designation According to | Manufacturer | Welding Procedure (AWS) | D (mm) |
J (A) |
||
|---|---|---|---|---|---|---|---|
| EN | AWS | DIN 8555 | |||||
| 1 | E-6-UM-55G | / | EDUR 600 | Jesenice (Slovenia) | MMAW (111) | 2.5 | 70 |
| 2 | / | Castolin 2 | / | Castoline Eutectic (Switzerland) | 3.25 | 92 | |
| 3 | MSG-6-GZ-60 | / | DUR 600-IG | BÖHLER (Germany) | GTAW (TIG) (141) | 1.2 | 76 |
| 4 | E-6-60-UM | / | UTP 670 | UTP (Germany) | MMAW (111) | 3.25 | 90 |
| 5 | E-4-UM-60-65-S | EFe5-B | Tooldur | Jesenice (Slovenia) | 2.5 | 80 | |
| 6 | ECrMo1B26 | E8018-B2 | EVBCrMo | Jesenice (Slovenia) | 2.5 | 75 | |
| 7 | ECrMo2B26 | E9018-B3 | EVB2CrMo | Jesenice (Slovenia) | 2.5 | 75 | |
| 8 | / | / | Phönix 120 K/E 425 B/E7018-1 | Tüssen (Germany) | 2.5 | 72 | |
| 9 | E18.8.Mn6B20+ | E307-15 | Inox 18/8/6 | Jesenice (Slovenia) | 2.5 | 70 | |