Table 1.

Parameters for the printing samples.

Printing Variant	Nozzle ø (mm)	Infill Density (%)	Printing Time (min)	Amount of Filament (m)
PLA/B/nozzle 0.4 mm/60% *	0.4	60	35	2.87
PLA/B/nozzle 0.4 mm/80%	0.4	80	38	3.15
PLA/B/nozzle 0.4 mm/100%	0.4	100	39	3.43
PLA/B/nozzle 0.6 mm/60%	0.6	60	25	2.97
PLA/B/nozzle 0.6 mm/80%	0.6	80	27	3.23
PLA/B/nozzle 0.6 mm/100%	0.6	100	27	3.48

* PLA—polylactic acid/B—bamboo filler/nozzle 0.4 mm—used nozzle/60%—infill density.