Table 3.

Results of deformation of the test samples between the first and last test cycles in the low-cycle test.

Printing Variant	Number of Finished Tests	Relative Deformation 1st Cycle (%)	Relative Deformation 1000th Cycle (%)	Strain Difference between 1st and 1000th Cycle (%)
PLA/B/nozzle 0.4 mm/60%	1000	0.069 ± 0.005	0.174 ± 0.005	0.11 ± 0.01
PLA/B/nozzle 0.4 mm/80%	1000	0.072 ± 0.005	0.165 ± 0.014	0.09 ± 0.01
PLA/B/nozzle 0.4 mm/100%	1000	0.065 ± 0.000	0.159 ± 0.016	0.09 ± 0.02
PLA/B/nozzle 0.6 mm/60%	1000	0.069 ± 0.005	0.171 ± 0.011	0.11 ± 0.01
PLA/B/nozzle 0.6 mm/80%	1000	0.072 ± 0.005	0.184 ± 0.005	0.11 ± 0.00
PLA/B/nozzle 0.6 mm/100%	1000	0.078 ± 0.005	0.184 ± 0.005	0.10 ± 0.01