Table 4.

Milling parameters of the blade prototype.

Processing Phase	Phase I Machining	Phase II Finishing
Cutting-Spindle Speed n [min−1]	5500–7000	6000
Cutting Speed vc [m/min]	105–121	113–115
Milling Depth ap [mm]	0.2–0.5	0.3
Milling width ae [mm]	0.15–0.35	0.2–0.25
Feed Rate vf [mm/min]	480–700	600
Feed per tooth fz [mm/tooth]	Depending on parameters	0.05
Side-Cutting Tilt Angle β [°]	30	30
Tool-Clamping Length L [mm]	65	65