Skip to main content
. 2022 Dec 15;15(24):8965. doi: 10.3390/ma15248965

Table 7.

Mechanical properties of wires after the calibration drawing process.

Variant No. Steel Grade Initial Diameter,
mm
Final Diameter, mm Rm, MPa Re,
MPa
Re/Rm A50,
%
1 S355J2 4.80 4.55 720 605 0.84 15.2
2 S355J2 5.00 4.55 750 642 0.86 18.2
3 G4Si1 5.00 4.55 730 635 0.87 14.3