Table 3.

Young’s modulus and maximum tensile stress for printed and injection-molded HDPE-PET blends.

Name	Single Prints		Three Prints
	Young’s Modulus [GPa]	Max Stress [MPa]	Young’s Modulus [GPa]	Max Stress [MPa]
P-PET0	1.7 ± 0.3	44.8 ± 7.7	2.1 ± 0.1	47.9 ± 3.2
P-PET2	2.1 ± 0.1	51.7 ± 1.1	2.2 ± 0.1	48.5 ± 0.9
P-PET5	2.1 ± 0.0	49.5 ± 1.7	1.8 ± 0.2	37.1 ± 2.6
P-PET10	2.1 ± 0.2	45.6 ± 1.8	2.1 ± 0.1	34.4 ± 3.3
P-PET_C	2.7 ± 0.1	65.1 ± 2.4	2.7 ± 0.1	59.5 ± 2.1
P-PET_CR	2.0 ± 0.0	32.3 ± 13.7	1.9 ± 0.1	48.8 ± 2.3
I-PET0	2.3 ± 0.5	44.4 ± 4.2
I-PET5	2.9 ± 0.7	34.2 ± 1.6