Skip to main content
. 2022 Nov 5;12(21):e4544. doi: 10.21769/BioProtoc.4544

Figure 5. Milling notch with the corresponding timing as in Video 2 . (A) .


Figure 5.

The notch pattern ( Supplementary File 2 ) is placed according to the pre-defined lamella site as in Step B29 and after precleans are done. (B) After digitally zooming on the pattern, the position of the Notch pattern with the defined dimensions is adjusted to be close to the edge of the slab. (C) Example of the milled notch before complete detachment.