Skip to main content
. 2023 Jan 16;9:11. doi: 10.1038/s41378-022-00480-1

Fig. 6. Contributions of gas damping, TED, and anchor losses to the total Q−1 for the 7 modes of design B.

Fig. 6

The Qgas1 was obtained from the fit in Fig. 2 at 1 mbar and 20 C (light green). Assuming non-constant pressure it was then scaled to 114 ∘C (dark green), according to Qgas1T0. QTED1 was obtained from Eq. (16) for 20 C (light red) and 114 C (dark red). The temperature- and pressure-independent Qanchor1 (gray) was calculated by subtracting QTED1 at 20 ∘C from the y-intercept of the linear fit for Q−1, that was shown in Fig. 2.