Skip to main content
. Author manuscript; available in PMC: 2024 Feb 14.
Published in final edited form as: Lab Chip. 2023 Feb 14;23(4):793–802. doi: 10.1039/d2lc00970f

Fig. 3.

Fig. 3

Device validation and pressure limits. A. Pressure within each well of a 96-well plate. Each column was set to a static pressure ranging from 2.5 to 50 psi. B. Burst pressure of 3D-printed insert device. C. 3D CAD model of X-profile O-ring. D. Photograph of 3D-printed insert device showing PTFE backup rings above and below X-profile O-rings. E. Photograph of device within well of 96-well plate. F. 3D CAD model of cross-section of X-profile O-ring.