CONFIGURATION INFORMATION ========================= Path : /opt/topspin3.2/conf/instr/spect/uxnmr.info Date : Fri Jul 1 16:31:18 2016 Release : TOPSPIN Version 3.2-pl2 Installed in : /opt/topspin3.2 Host : CZC2439F63 OS : CentOS release 5.9 (Final) CPU : Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz (8 cores at 1200 MHz with Hyperthreading) User : nmrsu (NMR Administrator) Description : Avance III 400 Location : System : Avance III NMR spectrometer 1H-frequency : 400.20 MHz Order Number : GH000213 Configured in: /opt/topspin3.2/conf/instr/spect IPSO: connected to spectrometer subnet - TCP/IP address = 149.236.99.254 - Tctrl : 1 - Fctrls: 2 - Gctrl1: without digital preemphasis - Rctrl : 1 - FREDs : none - DPP : none DRU: AQS DRU Z100977/02126 ECL 07.01 - TCP/IP address = 149.236.99.89 - Firmware Version = 130419 - DRU controls AQS-Rack and HPPR/2 AQS: connected to 149.236.99.89:/dev/tty10 _Slot_ SBSB _____________________Board_____________________ Number Addr Type HW-VS FW-VS ID ECL Name Description ----------------------------------------------------------- 2 0x10 0x43 0x5 CD R 0.1 REC-1 AQS RXAD/2 600 Z130588/350 ECL 00.01 3 0x34 0xd6 0x1 X 2.0 REF-1 REF/3-600 Reference Board for AQS/3 Receiver 4 0x24 0x32 0 S 2.0 SGU-1 AQS SGU/3 600 (2CH) Z117129/00491 ECL 02.00 FPGA-Vs=20121030 8 0x36 0x5 0 A 9.2 BLA-1 BLA2BB 150/60 20-400 W1345049/3154 ECL 09.02 12 0xa0 0x94 0 V 1.0 PS-1 14 0xa1 0x90 0 V 2.0 PS-2 AQS PSM-A Power Supply Module 15 0xa2 0x91 0 V 1.1 PS-3 AQS PSM-D Power Supply Module -- 0x20 0xd9 0 B 0.2 MASTER 1 0x20 0x7 0 B MASTER AQS Rack Master Logical Receiver/SGU configuration: Router: 1 AQS-Minirouter Amplifiers (AQS configuration): RO Amplifier Module Nucleus Power/W Switchbox Name PN/SN/FW 1 1 1 B 150 N BLA2BB 150/60 20-400 W1345049/3154/- 2 1 2 B 60 N BLA2BB 150/60 20-400 W1345049/3154/- Transmitters at the spectrometer subnet: ---------------------------------------- LTRX Z109888/00921 ECL 03.01: - TCP/IP address = 149.236.99.20 - Amplifier = BSMS/2 LOCK TRANSCEIVER 400: Z109888/00921 ECL 03.01 BSMS: BSMS/2 connected to ethernet - TCP/IP address = 149.236.99.20 - ELCB firmware version = 20121101 - GAB current limits = 0.0/X, 0.0/Y, 10.0/Z (in A) - SCB channels = 20 - Shim System = BOSS1-SB - L-TRX = BSMS/2 LOCK TRANSCEIVER 400: Z109888/00921 ECL 03.01 - Lock: on L-TRX board - VTU_SPB = BSMS/2 SPB SENSOR & PNEUMATIC BD: Z115191/01239 ECL 04.00 - VTU_VPSB1 = BSMS/2 VARIABLE POWER SUPPLY BD: Z115193/01437 ECL 01.04 VTU: in BSMS/2 connected to ethernet - TCP/IP address = 149.236.99.20 Bruker Automatic Changer: device connected to 149.236.99.254:/dev/tty04 - Capacity: 60 holders - Firmware: 20120928 - use BACS air = yes - BACS sx delay = 5 s - Sample Rail fast changer mode = no Sample Changers at the spectrometer subnet: ------------------------------------------- - BACS2_H15000-01_0415: at TCP/IP address 149.236.99.59 Preamplifiers : HPPR: - HPPR/2 preamplifier connected to 149.236.99.89:/dev/tty10 Type : HPPR/2 Controller: Application firmware = aQ no LED display for tuning and matching Module 1 : 1H/2H 1H (virtual 50 Ohm reference: 135.5%/72.3deg) PN=Z128274, SN=00112 from 20130107 Module 2 : 1H/2H 2H (virtual 50 Ohm reference: 97.7%/-67.2deg) PN=Z128274, SN=00112 from 20130107 Module 3 : XBB19F 2HS PN=Z128143, SN=00115 from 20121212 Frequency generation: - F1: for SGU - F2: for SGU RF cable connections (detected by 'confamp') -------------------------------------------------------------------- SGU1 NORM output -> input 1 of transmitter 1 (BLA2BB 150/60 20-400 W1345049/3154) SGU1 AUX output -> input 1 of transmitter 2 (BSMS/2 LOCK TRANSCEIVER 400 Z109888/00921 at TCP/IP 149.236.99.20) SGU2 NORM output -> input 2 of transmitter 1 (BLA2BB 150/60 20-400 W1345049/3154) SGU2 AUX output -> TUNE signal input of HPPR Blanking cable connections (detected by 'confamp') -------------------------------------------------------------------- transmitter 1 (BLA2BB 150/60 20-400 W1345049/3154) amplifier B-150W uses blanking 1 transmitter 1 (BLA2BB 150/60 20-400 W1345049/3154) amplifier B-60W uses blanking 2 transmitter 2 (BSMS/2 LOCK TRANSCEIVER 400 Z109888/00921 at TCP/IP 149.236.99.20) amplifier 2H-5W uses blanking 8