Skip to main content
Chemical Science logoLink to Chemical Science
. 2023 Mar 22;14(16):4351–4356. doi: 10.1039/d3sc00127j

Copper-catalyzed asymmetric allylic alkylation of racemic inert cyclic allylic ethers under batch and flow conditions

Jun Li a, Xiao Song a, Yan Wang a, Junrong Huang a,b,, Hengzhi You a,b,, Fen-Er Chen a,b,c,
PMCID: PMC10132103  PMID: 37123175

Abstract

Highly enantioselective Cu-catalyzed asymmetric allylic alkylation of racemic inert cyclic allylic ethers is accomplished in this work. The use of Grignard reagents in combination with BF3·OEt2 and CuBr·SMe2/L2 is the key to enable employment of long-challenging low reactive allylic substrates in this AAA reaction. In addition, the approach exhibited a remarkable superiority in the construction of a stereogenic center involving challenging sterically hindered nucleophiles for both primary and secondary alkyl groups. Extension of this method under continuous flow conditions was also performed with excellent enantioselectivity in a short residence time. Mechanistic experiments indicated that the reaction proceeded through an in situ generated allylic bromide intermediate. All these advantages demonstrated that this chiral catalytic system is a valuable complement for existing asymmetric catalytic methods.


The Cu-catalyzed AAA reactions employing challenging racemic inert cyclic allylic ethers with sterically hindered Grignard reagents have been disclosed under batch and flow conditions.graphic file with name d3sc00127j-ga.jpg

Introduction

Asymmetric allylic alkylation (AAA) reactions are powerful synthetic tools to strategically install C–C bonds.1–4 Generally, there are two main strategies for generating asymmetric C–C bonds in AAA reactions: (1) introduction of a chiral center from a prochiral substrate through the SN2′ pathway5–15 (Scheme 1a); (2) resolution,16,17 dynamic kinetic processes18–22 (DyKAT), or direct enantioconvergent transformation23–27 (DECT) from racemic chiral starting materials. Compared to prochiral substrates, AAA reactions from racemic substrates were far less studied. There are two equal amounts of enantiomers in the starting materials which complicated the catalytic processes and made the reaction more challenging.21 Even though the use of stabilized nucleophiles (pKa < 25) in Pd-catalyzed AAA of racemic starting materials has been particularly successful since 1994,22,28 the use of non-stabilized nucleophiles (pKa > 50) in Cu-catalyzed AAA of racemic starting materials with high yields and enantioselectivities was not reported until 2009.24 Many pioneers have made significant contributions to the development of this chemistry since then. For example, different copper–ligand complexes were synthesized,20,23 and various non-stabilized nucleophiles such as Grignard reagents,24,29 organolithium reagents,26 and organozirconium reagents17,30 were developed; versatile allylic substrates, such as bromides,20,23,24 chlorides,17,18,29 acetates25 and phosphates19 were employed (Scheme 1b). However, there still remain long-challenging issues in this field. First, Cu-catalyzed AAA reactions normally use allylic substrates with good leaving groups (such as Br, Cl, OCOR etc.) to enhance the reactivity and enantioselectivity.24 However, these substrates are mostly sensitive, prone to deterioration, and hard to purify and store, which limits their applications in multistep reactions and synthesis.8,31 Meanwhile, racemic inert substrates such as allylic ethers31–34 have shown unsatisfactory performance in AAA reactions. The pioneering research reported by Consiglio and co-workers revealed moderate enantioselectivities in Ni-catalyzed AAA using phenyl-ethers.35 Later on, Okamoto and co-workers achieved moderate results by employing pyridyl-ethers in Cu-catalyzed AAA with Grignard reagents.36 In 2012, Feringa and co-workers developed a highly enantioselective Cu-catalyzed AAA reaction with prochiral linear allylic ethers using organolithium reagents.8 However, the nucleophile scope was limited to nBuLi and nHexLi in this beautiful chemistry. To the best of our knowledge, despite extensive endeavours, highly efficient Cu-catalyzed AAA reactions with racemic inert substrates have not yet emerged.

Scheme 1. Asymmetric allylic alkylation (AAA) procedures.

Scheme 1

Another key challenge in Cu-catalyzed AAA reactions is the generality of the non-stabilized nucleophile scope used in the catalytic systems. Employment of functionalized and sterically hindered nucleophiles was found to be extremely difficult during the process.24 Crucial pioneering work was first conducted by Alexakis and co-workers where sterically hindered secondary alkyl groups were accomplished in moderate enantioselectivities with racemic allylic bromides.23 Later on, the improvement of the performance of secondary alkyl metal reagents was achieved with the same group by a well-designed catalytic system using racemic allylic trifluoroacetates, though it was not compatible with low reactive simple primary alkyl groups (such as MeMgBr).25 At the same time, Fletcher and co-workers described the breakthrough of a Cu-catalyzed AAA of racemic allylic chlorides with organozirconium reagents. The reaction was able to tolerate a variety of functionalized primary alkyl groups under convenient mild conditions.18,19 To the best of our knowledge, despite all these excellent advances, a general universal catalytic system which could enable efficient Cu-catalyzed AAA with challenging sterically hindered secondary and simple primary alkyl nucleophiles has not emerged. Herein, we reported a highly efficient Cu-catalyzed AAA reaction using racemic inert cyclic allylic ethers in combination with BF3·OEt2 and CuBr·SMe2/L2. Noteworthily, this catalytic system delivered general efficiency for challenging sterically hindered Grignard reagents with both primary and secondary alkyl groups.

Results and discussion

We started our investigation by examining the AAA reactions of 3-benzyloxycyclohexene (1a) with 1.5 equivalents of MeLi as a nucleophile in the presence of BF3·OEt2 (2 eq.), catalyzed by CuBr·SMe2 (5 mol%) and phosphoramidites (S,S,S)-L2 (11 mol%) in DCM. The reaction gave 3-methylcyclohexene (3a) in 70% yield with 48% ee (Table 1, entry 1). To enhance the enantioselectivity of 3a, we screened different copper sources, ligands and Lewis acids. However, employment of copper sources (such as CuCl, CuTc and Cu(OTf)2), ligands (such as (S,S,S)-L1 and (S,S,R)-L3), and Lewis acids (BF2OTf generated in situ from BF3·OEt2 and TMSOTf) gave poor results (Table 1, entries 1–7). Encouragingly, the enantioselectivity of 3a improved to 87% ee by using less reactive MeMgBr (Table 1, entry 8). Meanwhile, the copper/ligand ratio was found to have little effect on this catalytic system (Table 1, entries 8 vs. 9). When diluted MeMgBr (0.5 M in Et2O) was used, the enantioselectivity increased further to 96% ee in 46% yield (Table 1, entry 10). Delightfully, the yield of 3a was also optimized to 85% maintaining the high enantioselectivity by adjusting –OBn to the less hindered –OMe group (Table 1, entry 11). Benefiting from this low activity of the ether substrate, MeMgBr could be added dropwise for only 1 min instead of the 0.5 h or 2 h reported in previous work8,25 (Table 1, entries 11 vs. 12). Finally, single isomer 3a was produced in excellent yield and enantioselectivity with 10 mol% catalyst loading (99% yield, 98% ee, Table 1, entry 13). It was worth noting that the enantioselectivity of the product (Table S2, entry 3, 94% ee) remained excellent even at a low catalyst loading (1 mol%), but the conversion rate of 3-methoxycyclohex-1-ene (1b) showed a significant decline at 1 mol% catalyst loading (Table S2, entry 3, 78% conversion rate), despite extending the reaction time to 4 hours.

Selected optimization experimentsa.

graphic file with name d3sc00127j-u1.jpg
Entry Nu R CuX L Yieldd eei
1 MeLi Bn CuBr·SMe2 L2 70% 48%
2 MeLi Bn CuCl L2 57% 24%
3 MeLi Bn CuTc L2 61% 37%
4 MeLi Bn CuBr·SMe2 L1 74% <10%
5 MeLi Bn CuBr·SMe2 L3 54% 15%
6 MeLi Bn Cu(OTf)2 L3 N.D.
7c MeLi Bn CuBr·SMe2 L2 N.D.
8b,f MeMgBr Bn CuBr·SMe2 L2 48% 87%
9b MeMgBr Bn CuBr·SMe2 L2 45% 87%
10b MeMgBre,h Bn CuBr·SMe2 L2 46% 96%
11b MeMgBre,h Me CuBr·SMe2 L2 85% 96%
12b MeMgBrh Me CuBr·SMe2 L2 88% 96%
13b,g MeMgBrh Me CuBr·SMe2 L2 99% 98%
a

Conditions: racemic 1 (0.4 mmol), CuX (5% mol), L (11% mol), BF3·OEt2 (2 eq.), CH2Cl2 (4 mL), −78 °C, MeLi (1.5 eq.), 2 h addition time.

b

Conditions: racemic 1 (0.4 mmol), CuX (5% mol), L (6% mol), BF3·OEt2 (1.5 eq.), CH2Cl2 (4 mL), −78 °C, MeMgBr (3 M in Et2O, 1.5 eq.), 1 min addition time.

c

2 eq. BF3·OEt2 and 6 eq. TMSOTf were used.

d

Yield was determined by GC.

e

2 h addition time.

f

CuX (5% mol) and L (11% mol) were used.

g

CuX (10% mol) and L (11% mol) were used.

h

MeMgBr (0.5 M in Et2O) was used.

i

ee was determined by chiral GC.

With the optimal conditions in hand, the nucleophile scope of this novel protocol was then evaluated. Several enantiomerically enriched cycloalkenes were obtained with excellent enantioselectivities by using simple unfunctionalized primary alkyl (3a–3f, 4a), alkenyl (3g) and aromatic Grignard reagents (3i–3k, 5a). Surprisingly, bulky alkyl groups such as secondary alkyl Grignard reagents also reacted smoothly to give the corresponding products 3l–3p in 83–93% yields with excellent enantioselectivities. In particular, decent improvements were achieved for previously challenging sterically hindered nucleophiles in AAA of the reported allylic bromide approaches,23 such as 3h (65% ee vs. 28% ee), 3l (82% ee vs. 40% ee), 3m (90% ee vs. 74% ee), and 3n (88% ee vs. 70% ee) and for different ring sizes 4a (91% ee vs. 60% ee) and 5a (83% ee vs. 44% ee). To further extend the generality of this catalytic system, the reaction conditions were applied to challenging acyclic ether. However, only 15% ee was obtained in the reaction (Scheme S1), which was similar to the previous result with acyclic bromide (8% ee).23 Preliminary experiments of AAA reactions using challenging 3-methoxy-1-methylcyclohex-1-ene to form a more complex quaternary cycloalkene were also performed. A mixture of 1,1- and 1,3-disubstituted alkylation products was obtained with moderate enantioselectivities (Scheme S2, 35% yield, 83% ee for 1,1-disubstituted quaternary cycloalkene and 12% yield, 53% ee for 1,3-disubstituted cycloalkene). Further research focused on the construction of a stereogenic quaternary center is currently under study and will be reported in due course.

Although satisfactory results were achieved under batch conditions, an intractable question worth thinking about is whether Grignard reagents are too reactive to scale up.37–39 The recent emerging continuous flow technology demonstrated many advantages, including higher safety and efficiency, accurate control, better heat and mass transfer, easier amplification and better sustainability.40–43 Thus, we also explored the application of this protocol under continuous flow conditions. However, the enantioselectivities of the products dropped significantly under continuous flow conditions when using allylic bromide as the substrate in previous reports (up to 33% ee).26 Generally, the organometallic reagents were added dropwise over 2 h (ref. 26) or 0.5 h (ref. 25) to a solution of substrates to avoid side-reactions under batch conditions. In contrast, substrates and organometallic reagents are mixed simultaneously under flow conditions; the highly active allylic bromides may undergo uncatalyzed reactions6 or react with “ate” and “aggregated” copper species25 generated by a chiral catalyst exposed to an excess of organometallic reagents during the process. We suspected that the difference in contact mode between batch and flow mainly resulted in a decrease in enantioselectivities. Thus, we started our investigation by employing inert allylic ethers instead of high reactive allylic substrates here. The flow system was set up as shown in Scheme 3. Solutions of CuBr·SMe2, ligand L2 and cyclic racemic substrate 1b were first mixed with a BF3·OEt2 stream, and then, another stream of phenylethyl Grignard reagent was pumped into a microchip reactor. A sonication device was employed to increase reaction mixing and prevent solid aggregation. Encouragingly, the desired products were obtained in high yield with excellent enantioselectivity within 3.6 s under optimized flow conditions (Table S1 and Scheme S3). And the system could continue operating for over 700 min without any loss of activity or enantioselectivity to provide 1.09 g product (84% yield, 91% ee).

Scheme 3. Cu-catalyzed AAA reaction of 1b under continuous flow conditions.

Scheme 3

We then paid our attention to the mechanism of this new Cu-catalyzed AAA protocol. A Lewis acid was confirmed to be the key for the formation of desired products from racemic inert cyclic allylic ethers here.44 We carried out the AAA reaction of 1b without BF3·OEt2, and the starting material 1b could be almost completely recovered (Scheme 4 – (1)). It suggested that ether groups could act as a robust protecting group for former stages of synthetic schemes in the absence of a Lewis acid. Conversely, the ether groups could become leaving groups to perform enantioselective C–C bond formation in the presence of a Lewis acid and copper catalyst. This provided new opportunities for the application of the Cu-catalyzed AAA protocol using racemic inert cyclic allylic ethers in multistep reactions and synthesis.31 In addition, we examined the AAA reaction of 1b using cyclohexylmagnesium chloride as a nucleophile instead of cyclohexylmagnesium bromide (88% ee, Scheme 2, 3n). Surprisingly, the enantioselectivity of product 3n using cyclohexylmagnesium chloride was very low (Scheme 4 – (2), 33% ee). This phenomenon indicated that halogen anions from Grignard reagents might be involved in the reaction and influence the enantioselectivity of the product. A similar phenomenon was also observed in Fletcher and co-workers's work.18,19 They considered that allyl halide formed in situ from a halogen anion and phosphate in the reaction and reacted with nucleophiles to prove enantio-enriched alkylation products. We suspected that the allylic ethers might undergo analogical transformation here. To gain more insight into the reaction mechanism, MgBr2, instead of Grignard reagents was added to the mixture of 1b and BF3·OEt2. As we expected, 45% cyclic allylic bromide (1c) was observed in 1 h (Fig. S3), indicating that 1c could be generated in situ from 1b in this catalytic system (Scheme 4 – (2) and (3)). Furthermore, since we were not able to observe the intermediate 1c in the reaction of racemic allylic ethers, an even lower reactive 1a substrate was employed in our experiments. Inspiringly, trace 1c was observed during our standard AAA reaction (Scheme 4 – (4), Fig. S1 and S2). In combination with the inspiration from Alexakis's and co-workers pioneering work for DECT progress,25 we proposed a plausible mechanistic route for this new Cu-catalyzed AAA protocol using racemic inert cyclic allylic ethers. First, racemic 1c is generated from 1b in the presence BF3·OEt2 and Br. Then, (R)-1c and (S)-1c underwent a DECT process to form the same intermediate Int-1. Finally, Int-1c underwent reductive elimination to provide the desired single product 3 in high yield and enantioselectivity (Scheme 4 – (5)).

Scheme 4. Mechanistic analysis and a plausible reaction mechanism.

Scheme 4

Scheme 2. Substrate scope. aConditions: racemic 1 (0.4 mmol), CuBr·SMe2 (10% mol), L2 (11% mol), BF3·OEt2 (1.5 eq.), CH2Cl2 (4 mL), −78 °C, MeMgBr (1.5 eq.). ee was determined by chiral GC. bYield was determined by GC or NMR. cThe highest ee reported for the alkylation of analogous allylic bromides is given in parenthesis. dL4 was used. eIsolated yield of the corresponding diastereoisomeric epoxides.

Scheme 2

Conclusions

In summary, a highly efficient Cu-catalyzed AAA reaction of racemic inert cyclic allylic ethers was developed here. The use of BF3·OEt2 with CuBr·SMe2/L2 was confirmed to be crucial in this catalytic system through the proposed allylic bromide intermediate. Meanwhile, the new method showed significant advantages in nucleophile scope over existing protocols with racemic sensitive allylic substrates. In addition, application of the method under continuous flow conditions was also conducted successfully with excellent enantioselectivity and yield in a short residence time. We anticipate that this research will aid the development of a new AAA reaction with inert substrates and provide a valuable tool for existing asymmetric catalytic methods. Intensive efforts are now directed toward the extension of this process to other inert allylic substrates in our lab.

Data availability

The ESI is available and contains experimental and analytical data.

Author contributions

The manuscript was written through contributions of all authors. All authors have given approval to the final version of the manuscript.

Conflicts of interest

There are no conflicts to declare.

Supplementary Material

SC-014-D3SC00127J-s001

Acknowledgments

This work was supported by the Shenzhen Science and Technology Research Fund No. JCYJ20190806142203709; JSGG20191129114029286; JSGG20201103153807021; GXWD20220811173736002. We are also grateful to the Guangdong Basic and Applied Basic Research Foundation (No. 2021A1515110366) and Shenzhen Key Laboratory of Advanced Functional Carbon Materials Research and Comprehensive Application. We appreciate the guidance and opinions of Jingyuan Liao and Junwen Wang.

Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d3sc00127j

Notes and references

  1. Falciola C. A. Alexakis A. Copper-Catalyzed Asymmetric Allylic Alkylation. Eur. J. Org. Chem. 2008;2008:3765–3780. doi: 10.1002/ejoc.200800025. [DOI] [Google Scholar]
  2. Susse L. Stoltz B. M. Enantioselective Formation of Quaternary Centers by Allylic Alkylation with First-Row Transition-Metal Catalysts. Chem. Rev. 2021;121:4084–4099. doi: 10.1021/acs.chemrev.0c01115. [DOI] [PMC free article] [PubMed] [Google Scholar]
  3. Fan T. Song J. Gong L. Z. Asymmetric Redox Allylic Alkylation to Access 3,3'-Disubstituted Oxindoles Enabled by Ni/NHC Cooperative Catalysis. Angew. Chem., Int. Ed. 2022;61:e202201678. doi: 10.1002/anie.202201678. [DOI] [PubMed] [Google Scholar]
  4. Liu X. J. Zhang W. Y. Zheng C. You S. L. Iridium-Catalyzed Asymmetric Allylic Substitution of Methyl Azaarenes. Angew. Chem., Int. Ed. 2022;61:e202200164. doi: 10.1002/anie.202200164. [DOI] [PubMed] [Google Scholar]
  5. Tissot-Croset K. Polet D. Alexakis A. A highly effective phosphoramidite ligand for asymmetric allylic substitution. Angew. Chem., Int. Ed. 2004;43:2426–2428. doi: 10.1002/anie.200353744. [DOI] [PubMed] [Google Scholar]
  6. Perez M. Fananas-Mastral M. Bos P. H. Rudolph A. Harutyunyan S. R. Feringa B. L. Catalytic asymmetric carbon-carbon bond formation via allylic alkylations with organolithium compounds. Nat. Chem. 2011;3:377–381. doi: 10.1038/nchem.1009. [DOI] [PubMed] [Google Scholar]
  7. Fananas-Mastral M. Perez M. Bos P. H. Rudolph A. Harutyunyan S. R. Feringa B. L. Enantioselective synthesis of tertiary and quaternary stereogenic centers: copper/phosphoramidite-catalyzed allylic alkylation with organolithium reagents. Angew. Chem., Int. Ed. 2012;51:1922–1925. doi: 10.1002/anie.201107840. [DOI] [PubMed] [Google Scholar]
  8. Perez M. Fananas-Mastral M. Hornillos V. Rudolph A. Bos P. H. Harutyunyan S. R. Feringa B. L. Asymmetric allylic alkylation of acyclic allylic ethers with organolithium reagents. Chem.–Eur. J. 2012;18:11880–11883. doi: 10.1002/chem.201202251. [DOI] [PubMed] [Google Scholar]
  9. Hornillos V. Perez M. Fananas-Mastral M. Feringa B. L. Copper-catalyzed enantioselective allyl-allyl cross-coupling. J. Am. Chem. Soc. 2013;135:2140–2143. doi: 10.1021/ja312487r. [DOI] [PubMed] [Google Scholar]
  10. Deng W.-H. Ye F. Bai X.-F. Li L. Song T. Wei Y.-L. Xu L.-W. Chlorotrimethylsilane (TMSCl): an efficient silicon-based Lewis acid mediator in allylic alkylation using a diethylzinc reagent. RSC Adv. 2014;4:479–483. doi: 10.1039/C3RA44742A. [DOI] [Google Scholar]
  11. Fananas-Mastral M. Vitale R. Perez M. Feringa B. L. Enantioselective synthesis of all-carbon quaternary stereogenic centers via copper-catalyzed asymmetric allylic alkylation of (Z)-allyl bromides with organolithium reagents. Chem.–Eur. J. 2015;21:4209–4212. doi: 10.1002/chem.201406006. [DOI] [PubMed] [Google Scholar]
  12. Guduguntla S. Hornillos V. Tessier R. Fananas-Mastral M. Feringa B. L. Chiral Diarylmethanes via Copper-Catalyzed Asymmetric Allylic Arylation with Organolithium Compounds. Org. Lett. 2016;18:252–255. doi: 10.1021/acs.orglett.5b03396. [DOI] [PubMed] [Google Scholar]
  13. Xiong W. Xu G. Yu X. Tang W. P-Chiral Monophosphorus Ligands for Asymmetric Copper-Catalyzed Allylic Alkylation. Organometallics. 2019;38:4003–4013. doi: 10.1021/acs.organomet.9b00194. [DOI] [Google Scholar]
  14. Tarrieu R. Dumas A. Thongpaen J. Vives T. Roisnel T. Dorcet V. Crévisy C. Baslé O. Mauduit M. Readily Accessible Unsymmetrical Unsaturated 2,6-Diisopropylphenyl N-Heterocyclic Carbene Ligands. Applications in Enantioselective Catalysis. J. Org. Chem. 2017;82:1880–1887. doi: 10.1021/acs.joc.6b02888. [DOI] [PubMed] [Google Scholar]
  15. Guduguntla S. Gualtierotti J.-B. Goh S. S. Feringa B. L. Enantioselective Synthesis of Di- and Tri-Arylated All-Carbon Quaternary Stereocenters via Copper-Catalyzed Allylic Arylations with Organolithium Compounds. ACS Catal. 2016;6:6591–6595. doi: 10.1021/acscatal.6b01681. [DOI] [Google Scholar]
  16. Alexakis A. Millet R. SimplePhos as Efficient Ligand for the Copper-Catalyzed Kinetic Resolution of Cyclic Vinyloxiranes with Grignard Reagents. Synlett. 2008;2008:1797–1800. doi: 10.1055/s-2008-1077901. [DOI] [Google Scholar]
  17. Karabiyikoglu S. Brethomé A. V. Palacin T. Paton R. S. Fletcher S. P. Enantiomerically enriched tetrahydropyridine allyl chlorides. Chem. Sci. 2020;11:4125–4130. doi: 10.1039/D0SC00377H. [DOI] [Google Scholar]
  18. You H. Rideau E. Sidera M. Fletcher S. P. Non-stabilized nucleophiles in Cu-catalysed dynamic kinetic asymmetric allylic alkylation. Nature. 2015;517:351–355. doi: 10.1038/nature14089. [DOI] [PubMed] [Google Scholar]
  19. Rideau E. You H. Sidera M. Claridge T. D. W. Fletcher S. P. Mechanistic Studies on a Cu-Catalyzed Asymmetric Allylic Alkylation with Cyclic Racemic Starting Materials. J. Am. Chem. Soc. 2017;139:5614–5624. doi: 10.1021/jacs.7b02440. [DOI] [PubMed] [Google Scholar]
  20. Cui X. Y. Ge Y. Tan S. M. Jiang H. Tan D. Lu Y. Lee R. Tan C. H. (Guanidine)copper Complex-Catalyzed Enantioselective Dynamic Kinetic Allylic Alkynylation under Biphasic Condition. J. Am. Chem. Soc. 2018;140:8448–8455. doi: 10.1021/jacs.7b12806. [DOI] [PubMed] [Google Scholar]
  21. He R. Huo X. Zhao L. Wang F. Jiang L. Liao J. Zhang W. Stereodivergent Pd/Cu Catalysis for the Dynamic Kinetic Asymmetric Transformation of Racemic Unsymmetrical 1,3-Disubstituted Allyl Acetates. J. Am. Chem. Soc. 2020;142:8097–8103. doi: 10.1021/jacs.0c02150. [DOI] [PubMed] [Google Scholar]
  22. Bhat V. Welin E. R. Guo X. Stoltz B. M. Advances in Stereoconvergent Catalysis from 2005 to 2015: Transition-Metal-Mediated Stereoablative Reactions, Dynamic Kinetic Resolutions, and Dynamic Kinetic Asymmetric Transformations. Chem. Rev. 2017;117:4528–4561. doi: 10.1021/acs.chemrev.6b00731. [DOI] [PMC free article] [PubMed] [Google Scholar]
  23. Langlois J.-B. Alexakis A. Copper-Catalyzed Asymmetric Allylic Alkylation of Racemic Cyclic Substrates: Application of Dynamic Kinetic Asymmetric Transformation (DYKAT) Adv. Synth. Catal. 2010;352:447–457. doi: 10.1002/adsc.200900790. [DOI] [Google Scholar]
  24. Langlois J. B. Alexakis A. Dynamic kinetic asymmetric transformation in copper catalyzed allylic alkylation. Chem. Commun. 2009:3868–3870. doi: 10.1039/b907722g. doi: 10.1039/b907722g. [DOI] [PubMed] [Google Scholar]
  25. Langlois J.-B. Emery D. Mareda J. Alexakis A. Mechanistic identification and improvement of a direct enantioconvergent transformation in copper-catalyzed asymmetric allylic alkylation. Chem. Sci. 2012;3:1062–1069. doi: 10.1039/C2SC00868H. [DOI] [Google Scholar]
  26. Li J. Song X. Wu F. You H. Chen F.-E. Cu-Catalyzed Asymmetric Allylic Alkylation of Racemic Cyclic Allyl Bromides with Organolithium Compounds. Eur. J. Org. Chem. 2022;2022:e202200860. [Google Scholar]
  27. Ge Y. Cui X. Y. Tan S. M. Jiang H. Ren J. Lee N. Lee R. Tan C. H. Guanidine-Copper Complex Catalyzed Allylic Borylation for the Enantioconvergent Synthesis of Tertiary Cyclic Allylboronates. Angew. Chem., Int. Ed. 2019;58:2382–2386. doi: 10.1002/anie.201813490. [DOI] [PubMed] [Google Scholar]
  28. Trost B. M. Bunt R. C. Asymmetric induction in allylic alkylations of 3-(acyloxy)cycloalkenes. J. Am. Chem. Soc. 1994;116:4089–4090. doi: 10.1021/ja00088a059. [DOI] [Google Scholar]
  29. Langlois J. B. Alexakis A. Identification of a valuable kinetic process in copper-catalyzed asymmetric allylic alkylation. Angew. Chem., Int. Ed. 2011;50:1877–1881. doi: 10.1002/anie.201005373. [DOI] [PubMed] [Google Scholar]
  30. Sidera M. Fletcher S. P. Cu-catalyzed asymmetric addition of sp(2)-hybridized zirconium nucleophiles to racemic allyl bromides. Chem. Commun. 2015;51:5044–5047. doi: 10.1039/C5CC00421G. [DOI] [PubMed] [Google Scholar]
  31. Butt N. A. Zhang W. Transition metal-catalyzed allylic substitution reactions with unactivated allylic substrates. Chem. Soc. Rev. 2015;44:7929–7967. doi: 10.1039/C5CS00144G. [DOI] [PubMed] [Google Scholar]
  32. Suzuki N. Kondakov D. Y. Takahashi T. Zirconium-catalyzed highly regioselective carbon-carbon bond formation reactions. J. Am. Chem. Soc. 1993;115:8485–8486. doi: 10.1021/ja00071a083. [DOI] [Google Scholar]
  33. Yasui H. Mizutani K. Yorimitsu H. Oshima K. Cobalt-and rhodium-catalyzed cross-coupling reaction of allylic ethers and halides with organometallic reagents. Tetrahedron. 2006;62:1410–1415. doi: 10.1016/j.tet.2005.11.032. [DOI] [Google Scholar]
  34. Tu H. F. Zheng C. Xu R. Q. Liu X. J. You S. L. Iridium-Catalyzed Intermolecular Asymmetric Dearomatization of beta-Naphthols with Allyl Alcohols or Allyl Ethers. Angew. Chem., Int. Ed. 2017;56:3237–3241. doi: 10.1002/anie.201609654. [DOI] [PubMed] [Google Scholar]
  35. Consiglio G. Piccolo O. Roncetti L. Morandini F. Asymmetric nickel-catalyzed cross-coupling reaction of allylic substrates with grignard reagents. Tetrahedron. 1986;42:2043–2053. doi: 10.1016/S0040-4020(01)87621-3. [DOI] [Google Scholar]
  36. Tominaga S. Oi Y. Kato T. An D. K. Okamoto S. γ-Selective allylic substitution reaction with Grignard reagents catalyzed by copper N-heterocyclic carbene complexes and its application to enantioselective synthesis. Tetrahedron Lett. 2004;45:5585–5588. doi: 10.1016/j.tetlet.2004.05.135. [DOI] [Google Scholar]
  37. Laudadio G. Deng Y. van der Wal K. Ravelli D. Nuño M. Fagnoni M. Guthrie D. Sun Y. Noël T. C (sp3)–H functionalizations of light hydrocarbons using decatungstate photocatalysis in flow. Science. 2020;369:92–96. doi: 10.1126/science.abb4688. [DOI] [PubMed] [Google Scholar]
  38. Saito Y. Kobayashi S. Chiral Heterogeneous Scandium Lewis Acid Catalysts for Continuous-Flow Enantioselective Friedel–Crafts Carbon–Carbon Bond-Forming Reactions. Angew. Chem., Int. Ed. 2021;60:26566–26570. doi: 10.1002/anie.202112797. [DOI] [PubMed] [Google Scholar]
  39. Wang J. Li J. Wang Y. He S. You H. Chen F.-E. Polymer-Supported Chiral Heterogeneous Copper Catalyst for Asymmetric Conjugate Addition of Ketones and Imines under Batch and Flow. ACS Catal. 2022;12:9629–9637. doi: 10.1021/acscatal.2c02056. [DOI] [Google Scholar]
  40. Liao J. Zhang S. Wang Z. Song X. Zhang D. Kumar R. Jin J. Ren P. You H. Chen F.-E. Transition-metal catalyzed asymmetric reactions under continuous flow from 2015 to early 2020. Green Synth. Catal. 2020;1:121–133. doi: 10.1016/j.gresc.2020.08.001. [DOI] [Google Scholar]
  41. Wu Y. Chen W. Q. Zhao Y. Q. Piao H. R. Efficient synthesis of panaxadiol derivatives using continuous-flow microreactor and evaluation of anti-tumor activity. Chin. Chem. Lett. 2015;26:334–338. doi: 10.1016/j.cclet.2014.11.013. [DOI] [Google Scholar]
  42. Xin Y. Peng S. Chen J. X. Yang Z. J. Zhang J. Y. Continuous flow synthesis of porous materials. Chin. Chem. Lett. 2020;31:1448–1461. doi: 10.1016/j.cclet.2019.09.054. [DOI] [Google Scholar]
  43. Wan L. Kong G. Liu M. Jiang M. Cheng D. Chen F. Flow chemistry in the multi-step synthesis of natural products. Green Synth. Catal. 2022;3:243–258. doi: 10.1016/j.gresc.2022.07.007. [DOI] [Google Scholar]
  44. Yamamoto Y. Yamamoto S. Yatagai H. Maruyama K. Lewis acid mediated reactions of organocopper reagents. A remarkably enhanced regioselective gamma-attack of allylic halides and direct alkylation of allylic alcohols via RCu·BF3 system. J. Am. Chem. Soc. 1980;102:2318–2325. doi: 10.1021/ja00527a032. [DOI] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

SC-014-D3SC00127J-s001

Data Availability Statement

The ESI is available and contains experimental and analytical data.


Articles from Chemical Science are provided here courtesy of Royal Society of Chemistry

RESOURCES