Skip to main content
NCBI home page
Springer Nature - PMC COVID-19 Collection logoLink to Springer Nature - PMC COVID-19 Collection
. 2023 May 11:1–13. Online ahead of print. doi: 10.1007/s12273-023-1023-3

Numerical investigation of impinging jet ventilation in ICUs: Is thermal stratification a problem?

Lei Wang 1,2, Zhiqiang Wang 3, Sirui Zhu 3, Zhe Zhu 4, Tao Jin 1, Jianjian Wei 1,2,✉
PMCID: PMC10172721  PMID: 37359830

Abstract

Intensive care units (ICUs) are the high incidence sites of hospital-acquired infections, where impinging jet ventilation (IJV) shows great potential. Thermal stratification of IJV and its effect on contaminants distribution were systematically investigated in this study. By changing the setting of heat source or the air change rates, the main driving force of supply airflow can be transformed between thermal buoyancy and inertial force, which can be quantitatively described by the dimensionless buoyant jet length scale (lm¯). For the investigated air change rates, namely 2 ACH to 12 ACH, lm¯ varies between 0.20 and 2.80. The thermal buoyancy plays a dominant role in the movement of the horizontally exhaled airflow by the infector under low air change rate, where the temperature gradient is up to 2.45 °C/m. The flow center remains close to the breathing zone of the susceptible ahead, resulting into the highest exposure risk (6.6‰ for 10-µm particles). With higher heat flux of four PC monitors (from 0 W to 125.85 W for each monitor), the temperature gradient in ICU rises from 0.22 °C/m to 1.02 °C/m; however, the average normalized concentration of gaseous contaminants in the occupied zone is reduced from 0.81 to 0.37, because their thermal plumes are also able to carry containments around them to the ceiling-level readily. As the air change rate was increased to 8 ACH (lm¯=1.56), high momentum weakened the thermal stratification by reducing the temperature gradient to 0.37 °C/m and exhaled flow readily rose above the breathing zone; the intake fraction of susceptible patient located in front of the infector for 10-µm particles reduces to 0.8‰. This study proved the potential application of IJV in ICUs and provides theoretical guidance for its appropriate design.}

Keywords: impinging jet ventilation, heat sources, air change rates, respiratory particles, lock-up phenomenon

Acknowledgements

This study was financially supported by the National Natural Science Foundation of China (52178092) and the Basic Research Funds for the Central Government “Innovative Team of Zhejiang University” under contract number (2022FZZX01-09).

References

  1. Ahn H, Rim D, Lo L. Ventilation and energy performance of partitioned indoor spaces under mixing and displacement ventilation. Building Simulation. 2018;11:561–574. doi: 10.1007/s12273-017-0410-z. [DOI] [Google Scholar]
  2. AIA . Guidelines for design and construction of hospitals and healthcare facilities. Washington, DC: The American Institute of Architects; 2006. [Google Scholar]
  3. ASHRAE . ANSI/ASHRAE Standard 55-2020. Thermal Environmental Conditions for Human Occupancy, 2020. Atlanta, GA, USA: American Society of Heating, Refrigerating and Air-Conditioning Engineers; 2020. [Google Scholar]
  4. Berlanga FA, de Adana MR, Olmedo I, et al. Experimental evaluation of thermal comfort, ventilation performance indices and exposure to airborne contaminant in an airborne infection isolation room equipped with a displacement air distribution system. Energy and Buildings. 2018;158:209–221. doi: 10.1016/j.enbuild.2017.09.100. [DOI] [Google Scholar]
  5. Bhagat RK, Linden PF. Displacement ventilation: A viable ventilation strategy for makeshift hospitals and public buildings to contain COVID-19 and other airborne diseases. Royal Society Open Science. 2020;7:200680. doi: 10.1098/rsos.200680. [DOI] [PMC free article] [PubMed] [Google Scholar]
  6. Bhattacharya A, Pantelic J, Ghahramani A, et al. Three-dimensional analysis of the effect of human movement on indoor airflow patterns. Indoor Air. 2021;31:587–601. doi: 10.1111/ina.12735. [DOI] [PubMed] [Google Scholar]
  7. Bjørn E, Nielsen PV. Dispersal of exhaled air and personal exposure in displacement ventilated rooms. Indoor Air. 2002;12:147–164. doi: 10.1034/j.1600-0668.2002.08126.x. [DOI] [PubMed] [Google Scholar]
  8. Blot S, Ruppé E, Harbarth S, et al. Healthcare-associated infections in adult intensive care unit patients: Changes in epidemiology, diagnosis, prevention and contributions of new technologies. Intensive and Critical Care Nursing. 2022;70:103227. doi: 10.1016/j.iccn.2022.103227. [DOI] [PMC free article] [PubMed] [Google Scholar]
  9. Chen X, Feng Y, Zhong W, et al. Numerical investigation of the interaction, transport and deposition of multicomponent droplets in a simple mouth-throat model. Journal of Aerosol Science. 2017;105:108–127. doi: 10.1016/j.jaerosci.2016.12.001. [DOI] [Google Scholar]
  10. Chen W, Zhang N, Wei J, et al. Short-range airborne route dominates exposure of respiratory infection during close contact. Building and Environment. 2020;176:106859. doi: 10.1016/j.buildenv.2020.106859. [DOI] [Google Scholar]
  11. Chow TT, Wang J. Dynamic simulation on impact of surgeon bending movement on bacteria-carrying particles distribution in operating theatre. Building and Environment. 2012;57:68–80. doi: 10.1016/j.buildenv.2012.04.010. [DOI] [Google Scholar]
  12. Edwardson S, Cairns C. Nosocomial infections in the ICU. Anaesthesia & Intensive Care Medicine. 2019;20:14–18. doi: 10.1016/j.mpaic.2018.11.004. [DOI] [Google Scholar]
  13. Gao N, He Q, Niu J. Numerical study of the lock-up phenomenon of human exhaled droplets under a displacement ventilated room. Building Simulation. 2012;5:51–60. doi: 10.1007/s12273-012-0068-5. [DOI] [Google Scholar]
  14. GB 50736-2012 . GB 50736-2012: Design Code for Heating, Ventilation and Air Conditioning of Civil Buildings. Beijing: China Architecture and Building Press; 2012. [Google Scholar]
  15. Gupta JK, Lin CH, Chen Q. Characterizing exhaled airflow from breathing and talking. Indoor Air. 2010;20:31–39. doi: 10.1111/j.1600-0668.2009.00623.x. [DOI] [PubMed] [Google Scholar]
  16. Hu J, Kang Y, Yu J, et al. Numerical study on thermal stratification for impinging jet ventilation system in office buildings. Building and Environment. 2021;196:107798. doi: 10.1016/j.buildenv.2021.107798. [DOI] [Google Scholar]
  17. Hu J, Kang Y, Lu Y, et al. Simplified models for predicting thermal stratification in impinging jet ventilation rooms using multiple regression analysis. Building and Environment. 2021;206:108311. doi: 10.1016/j.buildenv.2021.108311. [DOI] [Google Scholar]
  18. Lai ACK, Chen F. Modeling particle deposition and distribution in a chamber with a two-equation Reynolds-averaged Navier–Stokes model. Journal of Aerosol Science. 2006;37:1770–1780. doi: 10.1016/j.jaerosci.2006.06.008. [DOI] [Google Scholar]
  19. Lv L, Wu Y, Cao C, et al. Impact of different human walking patterns on flow and contaminant dispersion in residential kitchens: Dynamic simulation study. Building Simulation. 2022;15:1051–1066. doi: 10.1007/s12273-021-0844-1. [DOI] [Google Scholar]
  20. Mao N, An CK, Guo LY, et al. Transmission risk of infectious droplets in physical spreading process at different times: a review. Building and Environment. 2020;185:107307. doi: 10.1016/j.buildenv.2020.107307. [DOI] [PMC free article] [PubMed] [Google Scholar]
  21. Menter FR, Langtry R, Völker S, et al. (2005). Transition modelling for general purpose CFD codes. In: Proceedings of the ERCOFTAC International Symposium on Engineering Turbulence Modelling and Measurements; ETMM6, Sardinia, Italy.
  22. Nielsen PV, Olmedo I, de Adana MR, et al. Airborne cross-infection risk between two people standing in surroundings with a vertical temperature gradient. HVAC&R Research. 2012;18:552–561. [Google Scholar]
  23. Qian H, Li Y, Nielsen PV, et al. Dispersion of exhaled droplet nuclei in a two-bed hospital ward with three different ventilation systems. Indoor Air. 2006;16:111–128. doi: 10.1111/j.1600-0668.2005.00407.x. [DOI] [PubMed] [Google Scholar]
  24. Ren J, He J, Kong X, et al. Robustness of ventilation systems in the control of walking-induced indoor fluctuations: Method development and case study. Building Simulation. 2022;15:1645–1660. doi: 10.1007/s12273-022-0888-x. [DOI] [PMC free article] [PubMed] [Google Scholar]
  25. Saidi MS, Rismanian M, Monjezi M, et al. Comparison between Lagrangian and Eulerian approaches in predicting motion of micron-sized particles in laminar flows. Atmospheric Environment. 2014;89:199–206. doi: 10.1016/j.atmosenv.2014.01.069. [DOI] [Google Scholar]
  26. Sakr Y, Jaschinski U, Wittebole X, et al. Sepsis in intensive care unit patients: worldwide data from the intensive care over nations audit. Open Forum Infectious Diseases. 2018;5:ofy313. doi: 10.1093/ofid/ofy313. [DOI] [PMC free article] [PubMed] [Google Scholar]
  27. Sam A. Prevention and control of infection in the ICU. Current Anaesthesia and Critical Care. 2005;16:191–199. doi: 10.1016/j.cacc.2006.01.003. [DOI] [Google Scholar]
  28. Satheesan MK, Mui KW, Wong LT. A numerical study of ventilation strategies for infection risk mitigation in general inpatient wards. Building Simulation. 2020;13:887–896. doi: 10.1007/s12273-020-0623-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
  29. Topp C, Nielsen PV, Sorensen DN. Application of computer simulated persons in indoor environmental modeling. ASHRAE Transactions. 2002;108:1084–1089. [Google Scholar]
  30. Vincent JL, Sakr Y, Singer M, et al. Prevalence and outcomes of infection among patients in intensive care units in 2017. JAMA. 2020;323:1478–1487. doi: 10.1001/jama.2020.2717. [DOI] [PMC free article] [PubMed] [Google Scholar]
  31. Wan MP, Chao CY. Numerical and experimental study of velocity and temperature characteristics in a ventilated enclosure with underfloor ventilation systems. Indoor Air. 2005;15:342–355. doi: 10.1111/j.1600-0668.2005.00378.x. [DOI] [PubMed] [Google Scholar]
  32. Wan J, Wei J, Lin Y, et al. Numerical investigation of bioaerosol transport in a compact lavatory. Buildings. 2021;11:526. doi: 10.3390/buildings11110526. [DOI] [Google Scholar]
  33. Wang Y, Zhong K, Zhang N, et al. Numerical analysis of solar radiation effects on flow patterns in street canyons. Engineering Applications of Computational Fluid Mechanics. 2014;8:252–262. doi: 10.1080/19942060.2014.11015511. [DOI] [Google Scholar]
  34. Wang L, Dai X, Wei J, et al. Numerical comparison of the efficiency of mixing ventilation and impinging jet ventilation for exhaled particle removal in a model intensive care unit. Building and Environment. 2021;200:107955. doi: 10.1016/j.buildenv.2021.107955. [DOI] [Google Scholar]
  35. Wong KY, Tan H, Nyakuma BB, et al. Effects of medical staff’s turning movement on dispersion of airborne particles under large air supply diffuser during operative surgeries. Environmental Science and Pollution Research. 2022;29:82492–82511. doi: 10.1007/s11356-022-21579-y. [DOI] [PubMed] [Google Scholar]
  36. Yamasawa H, Kobayashi T, Yamanaka T, et al. Effect of supply velocity and heat generation density on cooling and ventilation effectiveness in room with impinging jet ventilation system. Building and Environment. 2021;205:108299. doi: 10.1016/j.buildenv.2021.108299. [DOI] [Google Scholar]
  37. Yang B, Melikov AK, Kabanshi A, et al. A review of advanced air distribution methods - theory, practice, limitations and solutions. Energy and Buildings. 2019;202:109359. doi: 10.1016/j.enbuild.2019.109359. [DOI] [Google Scholar]
  38. Yang X, Ye X, Zuo B, et al. Analysis of the factors influencing the airflow behavior in an impinging jet ventilation room. Building Simulation. 2021;14:749–762. doi: 10.1007/s12273-020-0690-6. [DOI] [Google Scholar]
  39. Ye X, Kang Y, Yang X, et al. Temperature distribution and energy consumption in impinging jet and mixing ventilation heating rooms with intermittent cold outside air invasion. Energy and Buildings. 2018;158:1510–1522. doi: 10.1016/j.enbuild.2017.11.038. [DOI] [Google Scholar]
  40. Zhang Z, Chen Q. Experimental measurements and numerical simulations of particle transport and distribution in ventilated rooms. Atmospheric Environment. 2006;40:3396–3408. doi: 10.1016/j.atmosenv.2006.01.014. [DOI] [Google Scholar]
  41. Zhao B, Zhang Y, Li X, et al. Comparison of indoor aerosol particle concentration and deposition in different ventilated rooms by numerical method. Building and Environment. 2004;39:1–8. doi: 10.1016/j.buildenv.2003.08.002. [DOI] [Google Scholar]
  42. Zhao B, Zhang Z, Li X. Numerical study of the transport of droplets or particles generated by respiratory system indoors. Building and Environment. 2005;40:1032–1039. doi: 10.1016/j.buildenv.2004.09.018. [DOI] [PMC free article] [PubMed] [Google Scholar]
  43. Zhou Q, Qian H, Ren H, et al. The lock-up phenomenon of exhaled flow in a stable thermally-stratified indoor environment. Building and Environment. 2017;116:246–256. doi: 10.1016/j.buildenv.2017.02.010. [DOI] [Google Scholar]

Articles from Building Simulation are provided here courtesy of Nature Publishing Group

RESOURCES