In the Fig. 1 of ‘Effective transport network driven by tortuosity gradient enables high-electrochem-active solid-state batteries’ (National Science Review, Volume 10, Issue 3, 2023, nwac272, https://doi.org/10.1093/nsr/nwac272), the data for dQ/dV profiles and the corresponding potential for thin-ASSLBs were incorrectly provided (Fig. 1b and d left). The corrected version of Fig. 1 is presented below.
Figure 1.
Poor electrochemical properties of thickened solid-state batteries. (a) Schematic diagram of thin-ASSLBs and thick-ASSLB. (b and c) dQ/dV profiles at the second cycle and fifth cycle for (b) thin-ASSLBs and (c) thick-ASSLBs. (d) The potential of H1 to M at the second cycle and fifth cycle in thin-ASSLBs and thick-ASSLBs. (e) Comparison of the cycling stability of thin-ASSLBs, thick-ASSLBs, and thick-LELBs under 0.1C. The loadings of thin-ASSLBs, thick-ASSLBs, and thick-LELBs are ≈ 10, 20, and 20 mg cm−2, respectively.
Contributor Information
Qing-Song Liu, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China; Chongqing Research Institute of HIT, Chongqing 401135, China.
Han-Wen An, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China.
Xu-Feng Wang, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China.
Fan-Peng Kong, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China.
Ye-Cai Sun, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China.
Yu-Xin Gong, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China.
Shuai-Feng Lou, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China.
Yi-Fan Shi, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China.
Nan Sun, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China.
Biao Deng, Shanghai Institute of Applied Physics, Chinese Academy of Sciences, Shanghai 201204, China.
Jian Wang, Canadian Light Source Inc., University of Saskatchewan, Saskatoon, SK S7N 2V3, Canada.
Jia-Jun Wang, Ministry of Industry and Information Technology (MIIT) Key Laboratory of Critical Materials Technology for New Energy Conversion and Storage, School of Chemistry and Chemical Engineering, Harbin Institute of Technology (HIT), Harbin 150001, China; Chongqing Research Institute of HIT, Chongqing 401135, China.