Lin Yang
Lin Yang
1
National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150080, P. R. China
2
School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, NSW, 2006, Australia
1,2,
Shuai Guo
Shuai Guo
1
National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150080, P. R. China
1,
Chenchen Liao
Chenchen Liao
3
School of Electronics and Information Engineering, Harbin Institute of Technology, Harbin, 150080, P. R. China
3,
Chengyu Hou
Chengyu Hou
3
School of Electronics and Information Engineering, Harbin Institute of Technology, Harbin, 150080, P. R. China
3,
Shenda Jiang
Shenda Jiang
1
National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150080, P. R. China
1,
Jiacheng Li
Jiacheng Li
1
National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150080, P. R. China
1,
Xiaoliang Ma
Xiaoliang Ma
1
National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150080, P. R. China
1,
Liping Shi
Liping Shi
1
National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150080, P. R. China
1,
Lin Ye
Lin Ye
4
School of System Design and Intelligent Manufacturing, Southern University of Science and Technology, Shenzhen, 518055, P. R. China
4,
Xiaodong He
Xiaodong He
1
National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150080, P. R. China
5
Shenzhen STRONG Advanced Materials Research Institute Co., Ltd, Shenzhen, 518035, P. R. China
1,5
1
National Key Laboratory of Science and Technology on Advanced Composites in Special Environments, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, 150080, P. R. China
2
School of Aerospace, Mechanical and Mechatronic Engineering, The University of Sydney, NSW, 2006, Australia
3
School of Electronics and Information Engineering, Harbin Institute of Technology, Harbin, 150080, P. R. China
4
School of System Design and Intelligent Manufacturing, Southern University of Science and Technology, Shenzhen, 518055, P. R. China
5
Shenzhen STRONG Advanced Materials Research Institute Co., Ltd, Shenzhen, 518035, P. R. China
Collection date 2023 Jul.
© 2023 Wiley‐VCH GmbH
This is an open access article under the terms of the http://creativecommons.org/licenses/by-nc/4.0/ License, which permits use, distribution and reproduction in any medium, provided the original work is properly cited and is not used for commercial purposes.
