In the original publication [1], there was a mistake in Figure 11, specifically the radiation pattern measured (dotted line) and simulated (straight line) at a frequency of 9.5 GHz (E-plane graphics on the left side and H-plane graphics on the right side). Figure 11 was presented as additional information, and removing it will not affect the paper’s main findings or conclusion. With this correction, the order of some figures has been adjusted accordingly. The author states that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Footnotes
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
Reference
- 1.Avşar Aydın E. 3D-Printed Graphene-Based Bow-Tie Microstrip Antenna Design and Analysis for Ultra-Wideband Applications. Polymers. 2021;13:3724. doi: 10.3390/polym13213724. [DOI] [PMC free article] [PubMed] [Google Scholar]