Skip to main content
NCBI home page
Sage Choice logoLink to Sage Choice
. 2024 Sep 15;52(12):3030–3038. doi: 10.1177/03635465241274791

Arthroscopic Centralization of the Medial Meniscus Reduces Load on a Posterior Root Repair Under Dynamic Varus Loading: A Biomechanical Investigation

Adrian Deichsel †,*, Christian Peez †,‡, Michael J Raschke †, R Geoff Richards ‡, Boyko Gueorguiev ‡, Ivan Zderic ‡, Elmar Herbst †, Christoph Kittl †
PMCID: PMC11494841  PMID: 39279271

Abstract

Background:

In addition to the integrity of the meniscal hoop function, both the anterior and posterior meniscus roots as well as the meniscotibial and meniscofemoral ligaments are crucial in restraining meniscal extrusion. However, the interaction and load sharing between the roots and these peripheral attachments (PAs) are not known.

Purposes:

To investigate the influence of an insufficiency of the PAs on the forces acting on a posterior medial meniscus root repair (PMMRR) in both neutral and varus alignment and to explore whether meniscal centralization reduces these forces.

Study Design:

Controlled laboratory study.

Methods:

In 8 fresh-frozen human cadaveric knees, an arthroscopic transosseous root repair (step 1) was performed after sectioning the posterior root of the medial meniscus. The pull-out suture was connected to a load cell to allow measurement of the forces acting on the root repair. A medial closing-wedge distal femoral osteotomy was performed to change the mechanical axis from neutral to 5° of varus alignment. The meniscus was completely released from its PAs (step 2), followed by transosseous arthroscopic centralization (step 3). Each step was tested in both neutral and varus alignment. The specimens were subjected to nondestructive dynamic varus loading under axial compression of 300 N in 0°, 15°, 30°, 45°, and 60° flexion. The changes in force acting on the PMMRR were statistically analyzed using a mixed linear model.

Results:

Axial loading in neutral alignment led to an increase of the force of root repair of 3.1 ± 3.1 N (in 0° flexion) to 6.3 ± 4.4 N (in 60° flexion). In varus alignment, forces increased significantly from 30° (3.5 N; 95% CI, 1.1-5.8 N; P = .01) to 60° (7.1 N; 95% CI, 2.7-11.5 N; P = .007) flexion, in comparison with neutral alignment. Cutting of the PAs in neutral alignment led to a significant increase of root repair forces in all flexion angles, from 7.0 N (95% CI, 1.0-13.0 N; P = .02) to 9.1 N (95% CI, 4.1-14.1 N; P = .003), in comparison with the intact state. Varus alignment significantly increased the forces in the cut states from 4.8 N (95% CI, 1.0-8.5 N; P = .02) to 11.1 N (95% CI, 4.2-18.0 N; P = .006) from 30° to 60° flexion, in comparison with the neutral alignment. Arthroscopic centralization led to restoration of the native forces in both neutral and varus alignment, with no significant differences between the centralized and intact states.

Conclusion:

An insufficiency of the PAs of the medial meniscus, as well as varus alignment, led to increased forces acting on a PMMRR. These forces were reduced via an arthroscopic meniscal centralization.

Clinical Relevance:

Performing arthroscopic meniscal centralization concomitantly with PMMRR may reduce failure of the repair by reducing the load of the root.

Keywords: medial meniscus, meniscotibial ligament, extrusion, centralization, alignment

Tears of the posterior medial meniscus root (PMMR) are frequent and are known to increase medial compartment pressure and predispose to development of osteoarthritis.1,30,36,41,43,44 A PMMR repair (PMMRR) effectively restores cartilage biomechanics but is related to high failure rates, with numerous reasons for them discussed in the literature, most notably leg axis malalignment.8,20,60

Meniscal extrusion, defined as a meniscus being pressed out of its compartment, is a phenomenon associated with failure of a meniscal repair and a progression of osteoarthritic changes of the knee.5,8,19 Besides root tears, other types of meniscal tears that cause meniscal hoop dysfunction or meniscal resection could lead to extrusion.18,45 In addition to the roots, the medial meniscus is suspended by the peripheral attachments (PAs), composed of the circumferential meniscotibial ligaments (MTLs; also known as coronary ligaments) and meniscocapsular attachments (MCAs).52,54,56 Recently, the PAs were discussed as possible contributors to meniscal stability. Insufficiency of the PAs was shown to lead to extrusion of the meniscus, independent of the root integrity, in both clinical and biomechanical studies.11,28,46 To retract an extruded meniscus back into the tibiofemoral compartment, various techniques of meniscal centralization have been established,9,25,26 resulting in improved clinical and radiographic outcomes.24,29 As the meniscus roots and PAs interact to prevent meniscal extrusion, these surgical procedures simulating the function of the MTLs may reduce the forces acting on a root repair and thus potentially decrease the risk of clinical failure.

Therefore, the aims of the present study were to investigate the influence of an insufficiency of the PA on the forces acting on a PMMRR in both neutral and varus alignment and to explore whether arthroscopic meniscal centralization may decrease these forces. It was hypothesized that, whereas an insufficiency of the PA increases the forces acting on a PMMRR, these forces would be decreased after meniscal centralization.

Methods

Specimens and Preparation

Eight unpaired fresh-frozen human cadaveric knee specimens (age 73.0 ± 9.5 years (mean value ± standard deviation); 8 male; 5 right, 3 left), with no evidence of osteoarthritis, meniscal defects, other known injury of the knee, or previous knee surgery, were obtained from an international tissue bank (Science Care). During their lifetime, the donors bequeathed their corpse for use in medical science. Written consent was obtained from all donors such that no local or national ethics approval was required. After testing, each knee was dissected to check for ligamentous or meniscal injuries not specified in the testing protocol.

Specimens were thawed for 24 hours at room temperature before preparation. The femur and tibia were cut 250 mm above and below the joint line and embedded in aluminum tubes using polymethylmethacrylate (Suter Kunststoffe AG) such that the tibia and femur were centralized with the longitudinal tube axis aligned through the center of the intercondylar eminence and femoral notch.3,57 The skin and subcutaneous tissue were resected, leaving fascia and muscles intact. The fibula was then cut 100 mm distal to the proximal tibiofibular joint and transfixed with a 3.5-mm cortical screw to the tibia. 48 Specimens were wrapped in tissue paper soaked with normal saline (0.9% NaCl) to prevent drying.

Biomechanical Testing

Biomechanical testing was performed on a servohydraulic material testing machine (Bionix 858.20; MTS Systems Corp) equipped with a 5-kN load cell (HUPPERT 6; HUPPERT GmbH). The testing machine was coupled with a custom-made rig (Figure 1). The femoral end of the specimen was attached to the traverse of the testing machine in a fashion allowing for a fixed flexion angle of the knee joint and free varus/valgus angulation. The tibial end of the specimen allowed for free flexion/extension, rotation, and angulation, using a ball and socket joint. Under axial compression, the test rig allowed dynamic varus, which was defined as a laterally directed shift of the knee under axial compression. For every test sequence, the knee was loaded with an axial force from 0 to 300 N in 0°, 15°, 30°, 45°, and 60° flexion (1 loading cycle per flexion angle).

Figure 1.

Figure 1.

Open in a new tab

Test setup with a specimen mounted for biomechanical testing. (A) Load cell of the servohydraulic testing machine. (B) Rotating joint allowing flexion/extension and varus/valgus. (C) External fixator for fixation of medial closing-wedge osteotomy. (D) Tensioning device with load cell. (E) Ball-and-socket joint allowing flexion/extension, varus/valgus, and rotation.

Measurement of Meniscus Root Forces

After detaching the posterior root of the medial meniscus from its tibial insertion site, a transosseous repair was performed as previously described. 17 The root was sutured using a suture passer (FIRSTPASS MINI; Smith & Nephew), with a high-strength polyethylene suture (No. 2 FiberWire; Arthrex) in a single-loop technique. 16 A 2.0-mm K-wire was placed in the center of the anatomic posterior medial root tibial insertion site using a tibial aiming guide (Karl Storz), which was then overdrilled using a 4.5-mm cannulated drill bit up to the subchondral bone to avoid damage to the articular cartilage. The transosseous pull-out suture was shuttled through the bone tunnel and into a previously described custom-made tensioning device (Figure 2). 47 Measurement of the forces acting on the suture was realized by fixing the suture to a load cell connected to the tensioning device (Y1 in-line threaded force transducer; Flintec GmbH), which was connected over an amplifier (DAD141.1; Flintec GmbH) to a data acquisition device (USB 6343; National Instruments), which was connected to a laptop running a custom-made LabVIEW (LabVIEW 2020; National Instruments) script. The load cell was calibrated by incrementally applying tensile loads from 0 to 200 N while recording the voltage output, to create a calibration curve. Tensioning of the suture was achieved through turning the center nut, which telescoped the threads out of the device. Pilot testing demonstrated tensile forces of 20 N acting on the transtibial pull-out root repair when the sutures were tied over a cortical button, being comparable to the shear forces acting on the PMMR during bipedal stance.12,21,53,59 Therefore, the preload of the root repair was set to 20 N before each dynamic loading cycle of the specimen, as specified above. The change of force acting on the transosseous root repair under dynamic loading was recorded for each load cycle.

Figure 2.

Figure 2.

Open in a new tab

Custom-made tensioning and force measurement device. The suture (1) of the posterior medial meniscus root repair is shuttled through the device and fixed to a load cell (3). Tensioning of the suture is achieved by turning the center nut (2), which telescopes the threads out of the device.

Varisation Distal Femoral Osteotomy

As previously described, a medial closing-wedge distal femoral osteotomy was performed using the technique described by Wylie and Mak 58 to gradually adjust the alignment of each specimen and thus to evaluate the influence of varus alignment on the PMMRR forces. 47 Under radiographic control, the osteotomy plane was marked by drilling 2 parallel 2.4-mm K-wires through the distal femoral metaphysis starting 10 mm proximal to the medial epicondyle. The tips of the K-wires were placed at the upper border of the lateral femoral epicondyle marking the safe zone of the lateral hinge. 23 Two further 2.4-mm K-wires were placed 10 mm proximally, to mark the wedge to be taken out, to create varisation of the axis. Then, the osteotomy was performed using an oscillating saw, and the bone wedge was extracted, taking care to maintain an intact lateral hinge of 10 mm in width. The osteotomy was performed in the supracondylar metaphysis of the distal femur to avoid changes in the length and thus in the tension of the surrounding ligamentous structures. Under radiographic control, two 4.5-mm Steinmann pins were drilled into the medial distal femur 15 mm proximal and distal to the osteotomy plane in the mediolateral direction. The osteotomy was stabilized using an external fixator, mounted onto the Steinmann pins on the medial side of the distal femur, along with 2 further Steinmann pins drilled in the anterior-posterior direction (Figures 1 and 3). Via the external fixator, the alignment could be adjusted later by gradually opening or closing the osteotomy. The aim of the osteotomy creation was to adjust the leg axis in 2 different conditions. Neutral alignment (0°) was defined as the mechanical axis of the test rig (from the center of the femoral-sided load cell to the center of the tibial-sided ball-and-socket joint) running through 50% of the distance between the most medial and the most lateral aspects of the knee joint.10,40 Varus alignment was defined as the mechanical axis of the test rig crossing the tibial plateau at 25% of the distance between the most medial and the most lateral aspects of the knee joint (Figure 3) corresponding to 5° of varus.10,40 The crossing point of the mechanical axis with the tibial plateau was confirmed using the cable method.6,55 To adjust for the missing hip and ankle joint, the cable was spun from the center of the femoral fixation to the load cell to the center of the tibial-sided ball-and-socket joint to create a mechanical axis of the test rig. For each specimen, the osteotomy was individually adjusted based on the preexisting mechanical axis. In cases of constitutional valgus, the osteotomy was gradually closed for stepwise neutralization/varisation of the mechanical axis. Conversely, in cases of a preexisting varus deformity, the alignment was adjusted to neutral and the targeted varus of 25% – by opening or closing the osteotomy, depending on the severity of the constitutional varus. After tightening of the external fixation in the specified alignment, any remaining gap of the osteotomy was filled using custom-made 3-dimensional printed wedges to stabilize the osteotomy.

Figure 3.

Figure 3.

Open in a new tab

Anterior-posterior radiograph after medial closing-wedge distal femoral osteotomy to create varus alignment of the knee. The correct varus alignment was defined by the cable crossing the medial tibial plateau at 25% of the total tibial plateau width, corresponding to 5° of mechanical axis varus.

Sequential Cutting and Reconstruction Protocol

After evaluating the forces on the PMMRR (root repair) in both neutral and varus alignment, the medial meniscus was completely detached from its PA (MTL and MCA) using a scalpel, leaving the joint capsule intact (root repair + PA cut). After repeating the force measurements of the PMMRR, again in neutral and varus alignment, an arthroscopic centralization of the medial meniscus was performed, as previously described (root repair + PA cut + centralization) (Figure 4). 9 Using a tibial aiming guide (Karl Storz), a 2.0-mm K-wire was placed at the rim of the tibial plateau, at the intersection between the posterior horn and intermediate part of the medial meniscus, and overdrilled using a 4.5-mm cannulated drill bit up to the subchondral bone to avoid damage to the articular cartilage. Care was taken to prevent tunnel collisions between the PMMRR and the centralization tunnel. A horizontal mattress suture with a high-strength polyethylene suture (No. 2 FiberWire) was created using a suture passer (FIRSTPASS MINI). The free ends of the suture were shuttled through the tunnel and knotted over a cortical fixation button (Flipptack; Karl Storz).

Figure 4.

Figure 4.

Open in a new tab

Anatomic medial meniscus root repair with centralization according to Daney et al. 9 The sutures of the root repair were connected to a custom-made tensioning device to capture the root forces in response to the different testing conditions.

Data Acquisition and Analysis

Data acquisition from the load cell was performed using a custom-made LabVIEW script (LabVIEW 2020). The change of force from the 20-N preload applied to the PMMRR was calculated. Statistical analysis was performed using Prism (Version 9; GraphPad Software). Descriptive data are presented as mean value with standard deviation, and between-group differences are presented as mean difference with 95% confidence interval. The normality of data distribution was verified using histograms and the Shapiro-Wilk test. Mixed linear models with Geisser-Greenhouse correction were used to assess the main effects and interactions of each independent variable (cutting state and flexion angle) for neutral and varus alignment. The dependent variable was change of force at the PMMRR. Pairwise comparisons were used to compare the cutting states at different flexion angles as well as the alignment states in different flexion angles. Post hoc Dunnett correction was performed to account for multiple testing. A P value of <.05 was deemed to identify significant differences.

An a priori power analysis was performed using G*Power 2 software. 15 Based on mean values and standard deviations from a previous study, 37 it was assumed that a sample size of 8 would allow identification of changes in PMMRR force of 6 N with a SD of 4 N (effect size/Cohen d = 1.5), with 95% power, at the significance level of P < .05.

Results

Influence of Peripheral Attachments and Centralization

Force changes at PMMRR, due to dynamic varus loading, are shown in Figure 5 for neutral and varus alignment, as well as for each stabilization stage separately.

Figure 5.

Figure 5.

Open in a new tab

Force changes at a posterior medial meniscus root repair (PMMRR) due to dynamic varus loading, shown as mean value and SD. Centralization, transosseous arthroscopic meniscal centralization; PA cut, cut of peripheral attachments (meniscotibial and meniscofemoral ligament). *P < .05; **P < .01; ***P < .001.

In neutral alignment, axial compression caused a change of force at the PMMRR from 3.1 ± 3.1 N in 0° flexion to 6.3 ± 4.4 N in 60° flexion (Figure 5, left). After cutting the PA from the medial meniscus (PA cut), the forces increased significantly in all tested flexion angles from 7.0 N (95 % CI 1.0 – 13.0 N; P = 0.02) to 9.1 N (95 % CI 4.1 – 14.1 N; P = 0.003), in comparison with the intact state (P < .05). An arthroscopic centralization (centralization) of the medial meniscus significantly decreased the forces in all flexion angles in comparison with the PA cut state (P < .05). No significant differences between the PMMRR and centralization step were found.

In varus alignment, axial compression caused a change of force at the PMMRR from 6.6 ± 2.5 N in 0° flexion to 10.2 ± 7.1 N in 60° flexion (Figure 5, right). In the PA cut, the forces increased significantly, from 5.6 N (95 % CI 0.8 – 10.4 N; P = 0.02) in 15° to 16.0 N (95 % CI 5.4 – 26.8 N; P = 0.008) in 60° in comparison with the intact state (P < .05). Centralization of the medial meniscus significantly decreased the forces in all flexion angles in comparison with the PA cut state (P < .05). No significant differences between the PMMRR and centralization step were found.

Influence of Varus Alignment

When comparing the alignment states, the varus alignment significantly increased the forces at the PMMRR from 30° (3.5 N; 95% CI, 1.1-5.8; P = .01) to 60° (7.1 N; 95% CI, 2.7-11.5; P = .007) flexion in comparison with the neutral alignment state (Figure 6). After cutting the PA, the forces at the PMMRR were again significantly higher in varus alignment from 30° (4.8 N; 95% CI, 1.0-8.5; P = .02) to 60° (11.1 N; 95% CI, 4.2-18.0; P = .006) flexion in comparison with the neutral alignment state. After performing an arthroscopic centralization, a varus alignment caused significantly increased PMMRR forces in 45° (4.7 N; 95% CI, 1.2-8.2; P = .01) and 60° (5.8 N; 95% CI, 2.3-9.3; P = .002) flexion.

Figure 6.

Figure 6.

Open in a new tab

Force changes at a posterior medial meniscus root repair (PMMRR) due to dynamic varus loading in neutral and varus alignment in different cutting states, shown as mean value and SD. Centralization, transosseous arthroscopic meniscal centralization; PA cut, cut of peripheral attachments (meniscotibial and meniscofemoral ligament). *P < .05; **P < .01.

Discussion

The most important finding of this study was that an insufficiency of the PA of the medial meniscus (MTL and MCA) led to increased forces acting on a PMMRR in both neutral and varus alignment, which was redressable via an arthroscopic meniscal centralization. Furthermore, varus alignment significantly increased the forces on a PMMRR from 30° to 60° knee flexion compared with neutral alignment, which could be a reason for a higher failure rate of medial meniscus root repairs in varus knees.

Root tears of the meniscus are known to lead to an increase in cartilage loading, which subsequently leads to progression of osteoarthritis if untreated.1,30,36,41,44 An arthroscopic repair, if possible, is therefore the treatment of choice in patients with a root tear and absence of high-grade osteoarthritis or severe malalignment of the leg.4,32 However, high failure rates are described for root repairs of both the medial and lateral menisci. Risk factors for poor postoperative clinical outcome and retear rate include advanced age, high body mass index, and malalignment of the affected leg.8,20,60 Furthermore, the concept of meniscal extrusion has recently been recognized as a pathological finding associated with meniscal dysfunction, increased cartilage pressure, and early arthritic changes, as well as an increased failure rate of root repairs and meniscal allograft transplantations.5,7,8,27,33,35,42 Additionally, not only root tears but also any type of meniscal tears that cause meniscal hoop dysfunction or meniscal resection could lead to extrusion.13,18,45 Recently, however, a clinical study reported on patients with meniscal extrusion in which the meniscal body and roots were found to be intact. 28 In these patients, signal alterations of the MTL were found, indicating a role in the centralization of the menisci. Furthermore, serial magnetic resonance imaging studies in patients with meniscal extrusion and MTL abnormality have shown subsequent occurrence of PMMR tears. 31 Based on these findings, it has been postulated that MTL insufficiency is a precursor of PMMR tear because of the increased loads on the roots and that an additional centralization using either transtibial pull-out sutures or knotless suture anchors during arthroscopic root repair restores the load-distributing function of the medial meniscus.2,9,31 This theory is supported by the results of the present study, which showed increased forces acting on the PMMRR, after transection of the MTL, in both neutral and valgus alignment, which might lead to pathological loading of the meniscus over time.

The possible influence of the PA on meniscal biomechanics has been previously investigated by several studies, focusing mainly on extrusion as the outcome parameter. In 2 biomechanical studies on human cadaveric knee specimens utilizing a material testing machine, cutting of the MTL led to a significant increase in extrusion of the medial meniscus from 1.5 ± 0.6 mm to 3.4 ± 0.7 mm.11,46 Another study, investigating medial meniscal extrusion in human cadaveric knee specimens using a material testing machine, found that transection of the medial meniscus posterior root increased meniscal extrusion and peak contact pressures in the medial compartment. 9 One biomechanical study, using cadaveric knee specimens in a material testing machine, investigated the influence of the PA on meniscus root forces, measured using a 3-axis sensor. 38 Cutting the MTL was found to increase forces at the PMMR (no mean differences reported) under compression. A centralization, utilizing a single knotless suture anchor, was not able to restore native forces at the root. Conversely, in the present study, a transosseous centralization was able to restore the root forces back to the PA intact state in both neutral and varus alignment. The differences between the 2 studies might be attributable to differences in the test rig (no dynamic varus possible vs dynamic varus possible) as well as acquisition of root forces (3-axis sensor vs load cell). Finally, in a recent biomechanical study utilizing cadaveric knee specimens, an increased posterior tibial slope as well as an increasing flexion angle of the knee was also found to increase the forces acting on the PMMR, indicating an influence of lower extremity alignment on meniscus root repairs. 37 Additionally, the present study found that a varus alignment of the knee leads to increased PMMRR forces, irrespective of the cutting state.

This study is of clinical relevance because of its possible implications for the treatment of meniscal pathologies. Based on the findings, an arthroscopic meniscal centralization should be considered in cases of root repair in which the pathology of the PA is evident on magnetic resonance imaging or during arthroscopy. Indeed, the first studies investigating arthroscopic centralization as an adjunct for PMMRRs reported favorable results.29,39 Furthermore, realigning femoral or tibial osteotomies can be considered to reduce the load on a PMMRR, as varus malalignment has been shown to result in increased forces on a root repair. In this context, a recent retrospective study reported promising short-term clinical and radiological results after combined valgus-producing high tibial osteotomy and meniscal centralization in varus knees with medial meniscal extrusion. 22 However, high-quality clinical trials comparing root repair with and without centralization and/or realigning procedures are currently lacking.

Naturally, this study had notable limitations. As with all biomechanical studies, this was a time-zero study that could not reflect the healing effect of an MTL lesion over the course of rehabilitation. Furthermore, cadaveric knee specimens of older age (mean age, 73.0 ± 9.5 years) were used for biomechanical testing, which might not necessarily reflect clinical reality because root repair is typically performed in younger patients. Whether preexisting laxity of the MTL/MCA was present in the tested specimen could not be determined. However, none of the specimens had a degenerative posterior meniscus root tear, making this confounder unlikely, as isolated pathologies of the PA have been described as rare. 28 The force changes at the PMMRR, as shown in the present study, were comparably small, which might limit the clinical relevance of the findings. However, the loading conditions in the present study were subphysiological (200 N) to allow repeated testing without destruction of the osteotomy or specimen. In previous biomechanical investigations of the medial meniscus roots in a dynamic knee joint simulator simulating physiological muscle loading of the knee joint, the strains on the meniscus tripled after application of muscle forces, with loads up to 140 N.49-51 This reinforces that the effects observed in the present study will probably be exaggerated in the physiological environment.

In this study, the medial meniscus was completely detached from its PA, simulating the instability pattern during meniscal allograft transplantation rather than meniscal repair.14,28,31,35 Moreover, the present study used a transosseous root repair and centralization. The centralization sutures were tied over a cortical button, which might elongate, possibly influencing the results. Several different techniques exist for arthroscopic centralization of the menisci, ranging from transtibial pull-out sutures 9 to techniques using from 1 to 3 suture anchors.2,26,34 How these different techniques could affect the forces acting on the roots could not be investigated in the present study. Furthermore, the resulting medial meniscal extrusion and changes in knee joint kinematics were not assessed.

Finally, determination of the leg axis was performed by determining the intersection of the mechanical axis of the test rig with the tibial plateau, which might lead to small inaccuracies in comparison with determining joint angles on long-leg radiographs.5,9

Conclusion

An insufficiency of the PAs of the medial meniscus, as well as varus alignment, led to increased forces on a PMMRR. The effect of an insufficiency of the PAs was redressable via arthroscopic meniscal centralization.

Acknowledgments

The authors thank Lara Leibrandt and Henrike Miets for assisting with the illustrations presented in this study.

Footnotes

Submitted January 8, 2024; accepted July 17, 2024.

The authors declared that they have no conflicts of interest in the authorship and publication of this contribution. AOSSM checks author disclosures against the Open Payments Database (OPD). AOSSM has not conducted an independent investigation on the OPD and disclaims any liability or responsibility relating thereto.

ORCID iD: Adrian Deichsel Inline graphichttps://orcid.org/0000-0003-1643-5992

References

  • 1. Allaire R, Muriuki M, Gilbertson L, Harner C. Biomechanical consequences of a tear of the posterior root of the medial meniscus: similar to total meniscectomy. J Bone Joint Surg Am. 2008;90:1922-1931. [DOI] [PubMed] [Google Scholar]
  • 2. Amano Y, Ozeki N, Matsuda J, et al. Augmentation of a nonanatomical repair of a medial meniscus posterior root tear with centralization using three knotless anchors may be associated with less meniscal extrusion and better compressive load distribution in mid-flexion compared with non-anatomical root repair alone in a porcine knee model. Arthroscopy. 2023;39(12):2487-2498.e2484. [DOI] [PubMed] [Google Scholar]
  • 3. Behrendt P, Herbst E, Robinson JR, et al. The control of anteromedial rotatory instability is improved with combined flat sMCL and anteromedial reconstruction. Am J Sports Med. 2022;50(8):2093-2101. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 4. Bernard CD, Kennedy NI, Tagliero AJ, et al. Medial meniscus posterior root tear treatment: a matched cohort comparison of nonoperative management, partial meniscectomy, and repair. Am J Sports Med. 2020;48(1):128-132. [DOI] [PubMed] [Google Scholar]
  • 5. Berthiaume MJ, Raynauld JP, Martel-Pelletier J, et al. Meniscal tear and extrusion are strongly associated with progression of symptomatic knee osteoarthritis as assessed by quantitative magnetic resonance imaging. Ann Rheum Dis. 2005;64(4):556-563. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 6. Chan CK, Shanmugam R. A simple cable method for intraoperative limb alignment assessment. Malays Orthop J. 2016;10(1):69-70. [PMC free article] [PubMed] [Google Scholar]
  • 7. Chiba D, Sasaki E, Ota S, et al. US detection of medial meniscus extrusion can predict the risk of developing radiographic knee osteoarthritis: a 5-year cohort study. Eur Radiol. 2020;30(7):3996-4004. [DOI] [PubMed] [Google Scholar]
  • 8. Chung KS, Ha JK, Ra HJ, Kim JG. Preoperative varus alignment and postoperative meniscus extrusion are the main long-term predictive factors of clinical failure of meniscal root repair. Knee Surg Sports Traumatol Arthrosc. 2021;29(12):4122-4130. [DOI] [PubMed] [Google Scholar]
  • 9. Daney BT, Aman ZS, Krob JJ, et al. Utilization of transtibial centralization suture best minimizes extrusion and restores tibiofemoral contact mechanics for anatomic medial meniscal root repairs in a cadaveric model. Am J Sports Med. 2019;47(7):1591-1600. [DOI] [PubMed] [Google Scholar]
  • 10. Dawson MJ, Ollivier M, Menetrey J, Beaufils P. Osteotomy around the painful degenerative varus knee: a 2022 ESSKA formal consensus. Knee Surg Sports Traumatol Arthrosc. 2023;31(8):3041-3043. [DOI] [PubMed] [Google Scholar]
  • 11. Doan K, Dey Hazra ME, Brown JR, et al. Biomechanical analysis of meniscotibial ligament tenodesis to treat meniscal extrusion in the setting of posterior medial meniscus root repair. Am J Sports Med. 2023;51(12):3204-3210. [DOI] [PubMed] [Google Scholar]
  • 12. Ellermann S, Kittl C, Frank A, et al. Biomechanical analysis of distraction forces on the posterior meniscal roots to optimize early rehabilitation protocols. Orthop J Sports Med. 2020;8(9)(suppl 7):232596 7120S2325900517. [Google Scholar]
  • 13. Fairbank TJ. Knee joint changes after meniscectomy. J Bone Joint Surg Br. 1948;30(4):664-670. [PubMed] [Google Scholar]
  • 14. Fanelli D, Mercurio M, Gasparini G, Galasso O. Predictors of meniscal allograft transplantation outcome: a systematic review. J Knee Surg. 2021;34(3):303-321. [DOI] [PubMed] [Google Scholar]
  • 15. Faul F, Erdfelder E, Buchner A, Lang AG. Statistical power analyses using G*Power 3.1: tests for correlation and regression analyses. Behav Res Methods. 2009;41(4):1149-1160. [DOI] [PubMed] [Google Scholar]
  • 16. Feucht MJ, Grande E, Brunhuber J, Burgkart R, Imhoff AB, Braun S. Biomechanical evaluation of different suture techniques for arthroscopic transtibial pull-out repair of posterior medial meniscus root tears. Am J Sports Med. 2013;41(12):2784-2790. [DOI] [PubMed] [Google Scholar]
  • 17. Feucht MJ, Izadpanah K, Lacheta L, et al. Arthroscopic transtibial pullout repair for posterior meniscus root tears. Oper Orthop Traumatol. 2019;31(3):248-260. [DOI] [PubMed] [Google Scholar]
  • 18. Gajjar SM, Solanki KP, Shanmugasundaram S, Kambhampati SBS. Meniscal extrusion: a narrative review. Orthop J Sports Med. 2021;9(11):23259671211043797. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 19. Jackson GR, Warrier AA, Wessels M, et al. A systematic review of adverse events and complications after isolated posterior medial meniscus root repairs. Am J Sports Med. 2024;52(4):1109-1115. [DOI] [PubMed] [Google Scholar]
  • 20. Jiang EX, Abouljoud MM, Everhart JS, et al. Clinical factors associated with successful meniscal root repairs: a systematic review. Knee. 2019;26(2):285-291. [DOI] [PubMed] [Google Scholar]
  • 21. Johannsen AM, Civitarese DM, Padalecki JR, et al. Qualitative and quantitative anatomic analysis of the posterior root attachments of the medial and lateral menisci. Am J Sports Med. 2012;40(10):2342-2347. [DOI] [PubMed] [Google Scholar]
  • 22. Katagiri H, Nakagawa Y, Miyatake K, et al. Short-term outcomes after high tibial osteotomy aimed at neutral alignment combined with arthroscopic centralization of medial meniscus in osteoarthritis patients. J Knee Surg. 2023;36(3):261-268. [DOI] [PubMed] [Google Scholar]
  • 23. Kim TW, Lee MC, Cho JH, Kim JS, Lee YS. The ideal location of the lateral hinge in medial closing wedge osteotomy of the distal femur: analysis of soft tissue coverage and bone density. Am J Sports Med. 2019;47(12):2945-2951. [DOI] [PubMed] [Google Scholar]
  • 24. Koga H, Muneta T, Watanabe T, et al. Two-year outcomes after arthroscopic lateral meniscus centralization. Arthroscopy. 2016;32(10):2000-2008. [DOI] [PubMed] [Google Scholar]
  • 25. Koga H, Muneta T, Yagishita K, et al. Arthroscopic centralization of an extruded lateral meniscus. Arthrosc Tech. 2012;1(2):e209-e212. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 26. Koga H, Nakamura T, Nakagawa Y, et al. Arthroscopic centralization using knotless anchors for extruded medial meniscus. Arthrosc Tech. 2021;10(3):e639-e645. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 27. Kohno Y, Koga H, Ozeki N, et al. Biomechanical analysis of a centralization procedure for extruded lateral meniscus after meniscectomy in porcine knee joints. J Orthop Res. 2022;40(5):1097-1103. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 28. Krych AJ, Bernard CD, Leland DP, et al. Isolated meniscus extrusion associated with meniscotibial ligament abnormality. Knee Surg Sports Traumatol Arthrosc. 2020;28(11):3599-3605. [DOI] [PubMed] [Google Scholar]
  • 29. Krych AJ, Boos AM, Lamba A, Smith PA. Clinical outcome of meniscus centralization with medial meniscus root repair for the extruded medial meniscus. Arthroscopy. 2024;40(5):1578-1587. [DOI] [PubMed] [Google Scholar]
  • 30. Krych AJ, Lamba A, Wang AS, et al. Nonoperative management of degenerative medial meniscus posterior root tears: poor outcomes at a minimum 10-year follow-up. Am J Sports Med. 2023;51(10):2603-2607. [DOI] [PubMed] [Google Scholar]
  • 31. Krych AJ, LaPrade MD, Hevesi M, et al. Investigating the chronology of meniscus root tears: do medial meniscus posterior root tears cause extrusion or the other way around? Orthop J Sports Med. 2020;8(11):2325967120961368. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 32. Krych AJ, Song BM, Nauert RF, et al. Prospective consecutive clinical outcomes after transtibial root repair for posterior meniscal root tears: a multicenter study. Orthop J Sports Med. 2022;10(2):23259671221079794. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 33. Kubota R, Koga H, Ozeki N, et al. The effect of a centralization procedure for extruded lateral meniscus on load distribution in porcine knee joints at different flexion angles. BMC Musculoskelet Disord. 2020;21(1):205. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 34. Leafblad ND, Smith PA, Stuart MJ, Krych AJ. Arthroscopic centralization of the extruded medial meniscus. Arthrosc Tech. 2021;10(1):e43-e48. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 35. Lee HY, Bin SI, Kim JM, Lee BS, Kim SM, Lee SJ. Nonextruded grafts result in better cartilage quality after lateral meniscal allograft transplantation: quantitative 3-T MRI T2 mapping. Am J Sports Med. 2023;51(2):404-412. [DOI] [PubMed] [Google Scholar]
  • 36. Lim HC, Bae JH, Wang JH, Seok CW, Kim MK. Non-operative treatment of degenerative posterior root tear of the medial meniscus. Knee Surg Sports Traumatol Arthrosc. 2010;18(4):535-539. [DOI] [PubMed] [Google Scholar]
  • 37. Melugin H, Brown J, Hollenbeck J, et al. Increased posterior tibial slope increases force on the posterior medial meniscus root. Am J Sports Med. 2023;51(12):3197-3203. [DOI] [PubMed] [Google Scholar]
  • 38. Melugin HP, Brown JR, Hollenbeck JFM, et al. Meniscotibial ligament insufficiency increases force on the posterior medial meniscus root. Am J Sports Med. 2023;51(13):3502-3508. [DOI] [PubMed] [Google Scholar]
  • 39. Mochizuki Y, Kawahara K, Samejima Y, Kaneko T, Ikegami H, Musha Y. Short-term results and surgical technique of arthroscopic centralization as an augmentation for medial meniscus extrusion caused by medial meniscus posterior root tear. Eur J Orthop Surg Traumatol. 2021;31(6):1235-1241. [DOI] [PubMed] [Google Scholar]
  • 40. Muller M, Strecker W. Arthroscopy prior to osteotomy around the knee? Arch Orthop Trauma Surg. 2008;128(11):1217-1221. [DOI] [PubMed] [Google Scholar]
  • 41. Neogi DS, Kumar A, Rijal L, Yadav CS, Jaiman A, Nag HL. Role of nonoperative treatment in managing degenerative tears of the medial meniscus posterior root. J Orthop Traumatol. 2013;14(3):193-199. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 42. Ozeki N, Koga H, Matsuda J, et al. Biomechanical analysis of the centralization procedure for extruded lateral menisci with posterior root deficiency in a porcine model. J Orthop Sci. 2020;25(1):161-166. [DOI] [PubMed] [Google Scholar]
  • 43. Pache S, Aman ZS, Kennedy M, et al. Meniscal root tears: current concepts review. Arch Bone Jt Surg. 2018;6(4):250-259. [PMC free article] [PubMed] [Google Scholar]
  • 44. Padalecki JR, Jansson KS, Smith SD, et al. Biomechanical consequences of a complete radial tear adjacent to the medial meniscus posterior root attachment site: in situ pull-out repair restores derangement of joint mechanics. Am J Sports Med. 2014;42(3):699-707. [DOI] [PubMed] [Google Scholar]
  • 45. Pagnani MJ, Cooper DE, Warren RF. Extrusion of the medial meniscus. Arthroscopy. 1991;7(3):297-300. [DOI] [PubMed] [Google Scholar]
  • 46. Paletta GA, Jr, Crane DM, Konicek J, et al. Surgical treatment of meniscal extrusion: a biomechanical study on the role of the medial meniscotibial ligaments with early clinical validation. Orthop J Sports Med. 2020;8(7):2325967120936672. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 47. Peez C, Deichsel A, Zderic I, et al. Valgus malalignment causes increased forces on a medial collateral ligament reconstruction under dynamic valgus loading: a biomechanical study. Knee Surg Sports Traumatol Arthrosc. 2024;32(4):864-871. [DOI] [PubMed] [Google Scholar]
  • 48. Robinson JR, Bull AM, Thomas RR, Amis AA. The role of the medial collateral ligament and posteromedial capsule in controlling knee laxity. Am J Sports Med. 2006;34(11):1815-1823. [DOI] [PubMed] [Google Scholar]
  • 49. Seitz A, Kasisari R, Claes L, Ignatius A, Dürselen L. Forces acting on the anterior meniscotibial ligaments. Knee Surg Sports Traumatol Arthrosc. 2012;20(8):1488-1495. [DOI] [PubMed] [Google Scholar]
  • 50. Seitz AM, Lubomierski A, Friemert B, Ignatius A, Dürselen L. Effect of partial meniscectomy at the medial posterior horn on tibiofemoral contact mechanics and meniscal hoop strains in human knees. J Orthop Res. 2012;30(6):934-942. [DOI] [PubMed] [Google Scholar]
  • 51. Seitz AM, Schall F, Hacker SP, et al. Forces at the anterior meniscus attachments strongly increase under dynamic knee joint loading. Am J Sports Med. 2021;49(4):994-1004. [DOI] [PubMed] [Google Scholar]
  • 52. Śmigielski R, Becker R, Zdanowicz U, Ciszek B. Medial meniscus anatomy—from basic science to treatment. Knee Surg Sports Traumatol Arthrosc. 2015;23(1):8-14. [DOI] [PubMed] [Google Scholar]
  • 53. Starke C, Kopf S, Lippisch R, Lohmann CH, Becker R. Tensile forces on repaired medial meniscal root tears. Arthroscopy. 2013;29(2):205-212. [DOI] [PubMed] [Google Scholar]
  • 54. Tsutsumi M, Nimura A, Tharnmanularp S, Kudo S, Akita K. Posteromedial capsular anatomy of the tibia for consideration of the medial meniscal support structure using a multidimensional analysis. Sci Rep. 2023;13(1):12030. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 55. Wang L, Fallavollita P, Brand A, et al. Intra-op measurement of the mechanical axis deviation: an evaluation study on 19 human cadaver legs. Med Image Comput Comput Assist Interv. 2012;15(pt 2):609-616. [DOI] [PubMed] [Google Scholar]
  • 56. Warren LF, Marshall JL. The supporting structures and layers on the medial side of the knee: an anatomical analysis. J Bone Joint Surg Am. 1979;61(1):56-62. [PubMed] [Google Scholar]
  • 57. Wierer G, Milinkovic D, Robinson JR, et al. The superficial medial collateral ligament is the major restraint to anteromedial instability of the knee. Knee Surg Sports Traumatol Arthrosc. 2021; 29(2):405-416. [DOI] [PubMed] [Google Scholar]
  • 58. Wylie JD, Maak TG. Medial closing-wedge distal femoral osteotomy for genu valgum with lateral compartment disease. Arthrosc Tech. 2016;5(6):e1357-e1366. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 59. Yokoe T, Ouchi K, Yamaguchi Y, et al. Shear stress in the medial meniscus posterior root during daily activities. Knee. 2023;43:176-183. [DOI] [PubMed] [Google Scholar]
  • 60. Zhang X, Furumatsu T, Okazaki Y, et al. High body mass index is a risk factor for unfavorable clinical outcomes after medial meniscus posterior root repair in well-aligned knees. J Orthop Sci. 2021;26(3):430-434. [DOI] [PubMed] [Google Scholar]

Articles from The American Journal of Sports Medicine are provided here courtesy of SAGE Publications

RESOURCES