Abstract
Introduction:
The anatomic relationship between the mandibular canal, cortices and molar apices are critical in preventing nerve damage during various mandibular orthognathic surgeries. The purpose of this study was to determine the relationship between the position of the inferior alveolar canal and the buccal cortex. Analyzing the variation of the nerve position in patient with different mandibular skeletal relationships like prognathic and retrognathic mandible is critical for better prognosis of the surgery.
Methods:
A total of 45 patients including 15 in class I, class II & class III skeletal mandibular relationships were included in this study. The measurement of buccal and lingual cortical plate thickness was done using CBCT.
Results:
For the distance from the outer buccal cortex to the IAN canal at the level of the mandibular first, second and third molar regions, the mean distance was observed to be 4.605±0.98, 738±1.313, 4.994±1.584 respectively. The distance from the outer lingual cortex to IAN canal at the level of the mandibular first, second and third molars were observed to be 1.848±0.399, 1.550±0.307 and 1.370±0.395 respectively.
Conclusion:
The mean buccal cortical thickness was least in the class III group at mandibular first, second, and third molar regions. The lingual cortical thickness was least in the class II group, suggesting that the cut maybe given at the second molar region where the buccal cortical thickness is highest in order to prevent IAN injury. Hence, suggesting that precise osteotomy cuts may be customized to each patient using CBCT as an analyzing tool.
Keywords: Buccal cortical thickness, CBCT, mandibular skeletal relationships, Inferior alveolar canal
INTRODUCTION
Orthognathic surgery involves surgical correction of elements of facial skeleton to restore the proper anatomical and functional relationship in patients with dentofacial and skeletal deformities. Consideration of adjacent vital structures is of utmost importance while performing such surgeries. The inferior alveolar nerve (IAN) is at stake when performing mandibular osteotomies. Incidence of nerve damage apparent at operation during bilateral sagittal split osteotomy (BSSO) has been reported to vary from 1.3–18%, while post-operative sensory disturbances in the lower lip and chin have been reported to occur in 9–85% of operated sides. There have been studies reporting that due to the wide variance in the incidence rate of neurosensory disturbances according to the distance between the nerve canal and buccal cortical bone.[1] Nerve laceration during cortical bone dissection, tearing of the nerve during splitting or interosseous fixation, and contact of the mandibular canal with external cortical bone during SSRO are the most common causes of the IAN damage.[2]
The anatomic relationship between mandibular canal, cortical plates, and apices of mandibular molars is critical in preventing the nerve damage during BSSO. However, a standardized method for locating the mandibular canal is found lacking in the literature. Cone beam computed tomography (CBCT) with 3D imaging provides the ideal platform to investigate this problem further.
The purpose of this study was to determine the relationship between the anatomical position of the inferior alveolar canal and the buccal cortical bone and thickness of bone available for osteotomy at first, second, and third molar region using CBCT and analyzing the variation of the nerve position in patient groups with different mandibular skeletal relationships.
MATERIALS AND METHODS
For this study, patients reporting with orthognathic and orthodontic problems were included. Ethical clearance was obtained from institutional ethical committee with reference number RRDCH/IEC21/07 DATED 12/02/2021.
The study was conducted on 45 patients.
Inclusion criteria
Patients within age group of 18–40 years
Patients with angle’s Class I, Class II, and Class III relationship.
Exclusion criteria
Patients with loss of first or second lower molars.
Patients with mandibular pathologies
Patients with a history of trauma and/or surgery involving the maxillofacial region.
Radiographic analysis
Mandibular skeletal patterns were determined using lateral cephalogram.
Point A–Nasion–Point B (ANB) angle was taken as a guideline.
Group 1: ANB ANGLE 0–4°(CLASS I) Normal anteroposterior relationship of mandible to maxilla.
GROUP 2: ANB ANGLE >4°(CLASS II) Retrognathism (posterior relationship of mandible to maxilla).
GROUP 3: ANB ANGLE <0°(CLASS III) Prognathism (anterior relationship f mandible to maxilla).
Pre-treatment CBCT scans were taken using Scanora 3D (SOREDEX, FINLAND).
The scans were examined using ONDEMAND 3D and SCANORA Software.
After locating the IAN canal, linear measurements were calibrated.
The linear measurement parameters are as follows:
Point A: Distance from the outer buccal cortex to outer surface of the IAN canal at the level of mesial root of the mandibular first molar [Figure 1].
Figure 1.

Coronal section of CBCT showing linear measurement of the distance from outer cortex on the buccal side to the outer surface of IAN at the level of the mandibular first molar
Point B: Distance from the outer buccal cortex to outer surface of the IAN canal at the level of mesial root of the mandibular second molar [Figure 2].
Figure 2.

Coronal section of CBCT showing linear measurement of the distance from outer cortex on the buccal side to the outer surface of IAN at the level of the mandibular second molar
Point C: Distance from the outer buccal cortex to outer surface of the IAN canal at the level of distal surface of second mandibular molar or mesial surface of third mandibular molar [Figure 3].
Figure 3.

Coronal section of CBCT showing linear measurement of the distance from outer cortex on the buccal side to the outer surface of IAN at the level of mandibular third molar
Point D: Distance from the inner buccal cortex to outer surface of the IAN canal at the level of the mesial root of the mandibular first molar [Figure 4].
Figure 4.

Coronal section of CBCT showing linear measurement of the distance from inner cortex on the buccal side to the outer surface of IAN at the level of the mandibular first molar
Point E: Distance from the inner buccal cortex to the outer surface of the IAN canal at the level of the mesial root of the mandibular second molar [Figure 5].
Figure 5.

Coronal section of CBCT showing linear measurement of the distance from inner cortex on the buccal side to the outer surface of IAN at the level of the mandibular second molar
Point F: Shortest buccal thickness of bone available [Figure 6].
Figure 6.

Coronal section of CBCT showing linear measurement of shortest buccal cortical thickness at the level of the mandibular second molar
Point G: Inner cortical width of the IAN canal [Figure 7].
Figure 7.

Coronal section of CBCT showing linear measurement of cortical width of IAN at the level of the mandibular second molar
Point H: Distance from the outer lingual cortex to the outer surface of the IAN at the level of the mesial root of mandibular first molar [Figure 8].
Figure 8.

Coronal section of CBCT showing linear measurement of the distance from outer cortex on the lingual side up to the outer surface of IAN canal at the level of the mandibular first molar
Point I: Distance from the outer lingual cortex to the outer surface of the IAN at the level of the mesial root of mandibular second molar [Figure 9].
Figure 9.

Coronal section of CBCT showing linear measurement of the distance from the outer cortex on the lingual side up to the outer surface of IAN canal at the level of the mandibular second molar
Point J: Distance of the lingual bone thickness at the level of third molar [Figure 10].
Figure 10.

Coronal section of CBCT showing linear measurement of the distance from outer cortex on the lingual side up to the outer surface of IAN canal at the level of mandibular third molar
Measurements were obtained to one decimal place using a digital millimeter scale.
Statistical analysis
Statistical Package for Social Sciences (SPSS) for Windows Version 22.0 Released 2013. Armonk, NY: IBM Corp., was used to perform statistical analyzes.
Descriptive analysis includes the expression of values of different points in terms of mean and SD for each side and group.
Student paired t test was used to compare the mean values of different points between left and right sides.
Pairwise comparison yielded statistically insignificant results between two sides, so the average of two sides was derived for facilitating further comparison between three groups.
One-way ANOVA test followed by Tukey’s post hoc test was used to compare the mean values of different points between three groups. The level of significance was set at P < 0.05.
RESULTS
Point A
The mean distance of all the points on the Left side and on the Right side was compared. However, there was no significant difference in the mean distance between 2 sides among all the points [Table 1] [Graph 1].
Table 1.
Comparison of mean values of different points b/w left and right sides using student paired t test
| Comparison of mean values of different points b/w left and right sides using student paired t test | ||||||
|---|---|---|---|---|---|---|
| Points | Sides | n | Mean | SD | Mean Diff | P |
| Point A | Left | 45 | 4.573 | 0.999 | −0.064 | 0.16 |
| Right | 45 | 4.637 | 0.983 | |||
| Point B | Left | 45 | 5.674 | 1.505 | −0.128 | 0.23 |
| Right | 45 | 5.802 | 1.194 | |||
| Point C | Left | 45 | 4.992 | 1.591 | −0.004 | 0.92 |
| Right | 45 | 4.996 | 1.590 | |||
| Point D | Left | 45 | 2.240 | 0.684 | 0.177 | 0.13 |
| Right | 45 | 2.063 | 0.736 | |||
| Point E | Left | 45 | 3.151 | 1.160 | 0.143 | 0.50 |
| Right | 45 | 3.008 | 1.116 | |||
| Point F | Left | 45 | 2.114 | 0.860 | 0.085 | 0.45 |
| Right | 45 | 2.029 | 0.356 | |||
| Point G | Left | 45 | 1.990 | 0.594 | −0.097 | 0.22 |
| Right | 45 | 2.086 | 0.442 | |||
| Point H | Left | 45 | 1.841 | 0.544 | −0.013 | 0.87 |
| Right | 45 | 1.854 | 0.398 | |||
| Point I | Left | 45 | 1.561 | 0.416 | 0.021 | 0.73 |
| Right | 45 | 1.540 | 0.312 | |||
| Point J | Left | 45 | 1.324 | 0.456 | −0.092 | 0.15 |
| Right | 45 | 1.416 | 0.437 | |||
Graph 1.

Comparison of mean values of different points b/w left and right sides
For the distance from the buccal cortex to the IAN canal at the level of the mandibular first molar, the mean of the right and left sides was computed and was observed to be 4.605 ± 0.980 (SD) [Table 2] [Graph 2]. The mean distance of Point A in Group 1 was 4.929 ± 0.648, Group 2 was 5.323 ± 0.453, and Group 3 was 4.269 ± 0.719. A one-way ANOVA test was significant (P < 0.001) among the three groups. Multiple comparison tests revealed that Group 3 was significantly lower (P < 0.001) compared to Groups 1 and 2. However, no significant difference was observed between Groups 1 and 2 (P = 0.21) [Table 3] [Graph 3].
Table 2.
Comparison of descriptive statistics for different points after deriving the average of right and left sides
| Descriptive statistics for different points after deriving the average of right and left sides | |||||
|---|---|---|---|---|---|
| Points | n | Mean | SD | Min | Max |
| Point A | 45 | 4.605 | 0.980 | 2.29 | 6.20 |
| Point B | 45 | 5.738 | 1.313 | 2.82 | 7.68 |
| Point C | 45 | 4.994 | 1.584 | 1.85 | 7.57 |
| Point D | 45 | 2.152 | 0.600 | 0.70 | 4.02 |
| Point E | 45 | 3.079 | 0.891 | 1.49 | 4.81 |
| Point F | 45 | 2.072 | 0.543 | 1.10 | 3.29 |
| Point G | 45 | 2.038 | 0.455 | 0.97 | 2.82 |
| Point H | 45 | 1.848 | 0.399 | 0.89 | 2.50 |
| Point I | 45 | 1.550 | 0.307 | 0.70 | 2.21 |
| Point J | 45 | 1.370 | 0.395 | 0.71 | 2.06 |
Graph 2.

Comparison of mean distance of different Points after deriving the average of right and left sides
Table 3.
Comparison of mean distance of different points [Point A to Point E] between three groups
| Comparison of a mean distance of different points [Point A to Point E] between three groups using one-way ANOVA test followed by Tukey’s post hoc test | |||||||
|---|---|---|---|---|---|---|---|
| Points | Groups | n | Mean | SD | P a | Sig. Diff | P b |
| Point A | Group 1 | 15 | 4.929 | 0.648 | <0.001* | G1 vs G2 | 0.21 |
| Group 2 | 15 | 5.323 | 0.453 | G1 vs G3 | <0.001* | ||
| Group 3 | 15 | 3.564 | 0.752 | G2 vs G3 | <0.001* | ||
| Point B | Group 1 | 15 | 6.227 | 0.791 | <0.001* | G1 vs G2 | 0.21 |
| Group 2 | 15 | 6.718 | 0.821 | G1 vs G3 | <0.001* | ||
| Group 3 | 15 | 4.269 | 0.719 | G2 vs G3 | <0.001* | ||
| Point C | Group 1 | 15 | 4.765 | 0.936 | <0.001* | G1 vs G2 | <0.001* |
| Group 2 | 15 | 6.753 | 0.790 | G1 vs G3 | <0.001* | ||
| Group 3 | 15 | 3.464 | 0.710 | G2 vs G3 | <0.001* | ||
| Point D | Group 1 | 15 | 3.981 | 0.496 | 0.006* | G1 vs G2 | 0.02* |
| Group 2 | 15 | 4.541 | 0.273 | G1 vs G3 | 0.97 | ||
| Group 3 | 15 | 2.933 | 0.752 | G2 vs G3 | 0.01* | ||
| Point E | Group 1 | 15 | 3.034 | 0.495 | <0.001* | G1 vs G2 | <0.001* |
| Group 2 | 15 | 3.950 | 0.601 | G1 vs G3 | 0.001* | ||
| Group 3 | 15 | 2.254 | 0.588 | G2 vs G3 | <0.001* | ||
* – Statistically significant. G1 – Group 1; G2 – Groups 2 and G3 – Group 3
Graph 3.

Comparison of mean distance of different points [Point A to Point E] between three groups
Point B
For the distance from the buccal cortex to the IAN canal at the level of mandibular second molar, the mean of the right and left sides was computed and was observed to be 5.738 ± 1.313 (SD) [Table 2]. The mean distance of Point B in Group 1 was 6.227 ± 0.791, Group 2 was 6.718 ± 0.821, and Group 3 was 4.269 ± 0.719. A one-way ANOVA test was significant (P < 0.001) among the three groups. Multiple comparison tests between the groups revealed that Group 3 was significantly lower (P < 0.001) compared to Groups 1 and 2. However, no significant difference was observed between Group 1 and Group 2 (P = 0.21) [Table 3] [Graph 3].
Point C
For the distance from the buccal cortex to the IAN canal at the level of the mandibular third molar, the mean of the right and left sides was computed and was observed to be 4.994 ± 1.584 (SD) [Table 2]. The mean distance of Point C in Group 1 was 4.994 ± 1.584, Group 2 was 6.718 ± 0.821, and Group 3 was 4.269 ± 0.719. A one-way ANOVA test was significant (P < 0.001) among the three groups. Multiple comparison tests between the groups revealed that Group 3 was significantly lower (P < 0.001) compared to Groups 1 and 2. Similarly, significant difference was observed between Groups 1 and 2 (P < 0.001) [Table 3] [Graph 3].
Point D
For the distance from the inner buccal cortex to the IAN canal at the level of the mandibular first molar, the mean of the right and left sides was computed and was observed to be 2.152 ± 0.6 (SD). [Table 2] The mean distance of Point D in Group 1 was 3.981 ± 0.496, Group 2 was 4.541 ± 0.273, and Group 3 was 2.933 ± 0.752. A one-way ANOVA test was significant (P = 0.006) among the groups. Multiple comparison tests between the groups revealed that Group 2 was significantly higher compared to Group 1 (P = 0.02) and Group 3 (P = 0.01). However, no significant difference was observed between Groups 1 and 3 (P = 0.97) [Table 3] [Graph 3].
Point E
For the distance from the inner buccal cortex to the IAN canal at the level of the mandibular second molar, the mean of the right and left sides was computed and was observed to be 3.079 ± 0.891 (SD) [Table 2]. The mean distance of Point E in Group 1 was 3.034 ± 0.495, Group 2 was 3.95 ± 0.601, and Group 3 was 2.254 ± 0.588. A one-way ANOVA test was significant (P < 0.001) among the three groups. Multiple comparison tests between the groups revealed that Group 3 was significantly lower (P < 0.001) compared to Groups 1 and 2. Similarly, significant difference was observed between Group 1 and 2 (P < 0.001) [Table 3] [Graph 3].
Point F
For the shortest buccal thickness of bone, the mean of the right and left sides was computed and was observed to be 2.072 ± 0.543 (SD) [Table 2]. The mean distance of Point F in Group 1 was 1.798 ± 0.374, Group 2 was 2.553 ± 0.489, and Group 3 was 1.864 ± 0.415. A one-way ANOVA test was significant (P < 0.001) among the three groups. Multiple comparison tests between the groups revealed that Group 2 was significantly higher (P < 0.001) compared to Groups 1 and 3. However, no significant difference was observed between Groups 1 and 3 (P = 0.91) [Table 4] [Graph 4].
Table 4.
Comparison of mean distance of [Point F and G] between three groups
| Comparison of mean distance of different points [Point F and G] between three groups using one-way ANOVA test followed by Tukey’s post hoc test | |||||||
|---|---|---|---|---|---|---|---|
| Points | Groups | n | Mean | SD | P a | Sig. Diff | P b |
| Point F | Group 1 | 15 | 1.798 | 0.374 | <0.001* | G1 vs G2 | <0.001* |
| Group 2 | 15 | 2.553 | 0.489 | G1 vs G3 | 0.91 | ||
| Group 3 | 15 | 1.864 | 0.415 | G2 vs G3 | <0.001* | ||
| Point G | Group 1 | 15 | 1.652 | 0.306 | <0.001* | G1 vs G2 | 0.02* |
| Group 2 | 15 | 1.914 | 0.257 | G1 vs G3 | <0.001* | ||
| Group 3 | 15 | 2.548 | 0.190 | G2 vs G3 | <0.001* | ||
* – Statistically significant. G1 – Group 1; G2 – Group 2; and G3 – Group 3
Graph 4.

Comparison of mean distance of [Point F and G] between three groups
Point G
For the cortical width of the inferior alveolar canal at the mandibular second molar, the mean of the right and left sides was computed and was observed to be 2.038 ± 0.455 (SD) [Table 2]. The mean distance of Point G in Group 1 was 1.652 ± 0.306, Group 2 was 1.914 ± 0.257, and Group 3 was 2.548 ± 0.190. A one-way ANOVA test was significant (P < 0.001) among the three groups. Multiple comparison tests between the groups revealed that Group 3 was significantly lower (P < 0.001) compared to Group 1 and Group 2. Similarly, significant difference was observed between Group 1 and Group 2 (P = 0.02) [Table 4] [Graph 4].
Point H
For the distance from the lingual cortex to the IAN canal at the level of the mandibular first molar, the mean of the right and left sides was computed, and mean distance was observed to be 1.848 ± 0.399 (SD) [Table 2]. The mean distance of Point H in Group 1 was 1.951 ± 0.266, Group 2 was 1.429 ± 0.279, and Group 3 was 2.163 ± 0.211. A one-way ANOVA test was significant (P < 0.001) among the three groups. Multiple comparison tests between the groups revealed that Group 3 was significantly higher (<0.001) compared to Group 1. Similarly, significant difference was observed between Groups 1 and 3 (P = 0.04) [Table 5] [Graph 5].
Table 5.
Comparison of mean distance of different points [Point H to Point J] between three groups
| Comparison of mean distance of different points [Point H to Point J] between three groups using one-way ANOVA test followed by Tukey’s post hoc test | |||||||
|---|---|---|---|---|---|---|---|
| Points | Groups | n | Mean | SD | P a | Sig. Diff | P b |
| Point H | Group 1 | 15 | 1.951 | 0.266 | <0.001* | G1 vs G2 | <0.001* |
| Group 2 | 15 | 1.429 | 0.279 | G1 vs G3 | 0.04* | ||
| Group 3 | 15 | 2.163 | 0.211 | G2 vs G3 | <0.001* | ||
| Point I | Group 1 | 15 | 1.500 | 0.202 | 0.002* | G1 vs G2 | 0.54 |
| Group 2 | 15 | 1.394 | 0.246 | G1 vs G3 | 0.03* | ||
| Group 3 | 15 | 1.757 | 0.346 | G2 vs G3 | 0.002* | ||
| Point J | Group 1 | 15 | 1.014 | 0.216 | <0.001* | G1 vs G2 | 0.002* |
| Group 2 | 15 | 1.392 | 0.281 | G1 vs G3 | <0.001* | ||
| Group 3 | 15 | 1.704 | 0.328 | G2 vs G3 | 0.01* | ||
* – Statistically significant. G1 – Group 1; G2 – Group 2; and G3 – Group 3
Graph 5.

Comparison of mean distance of different points [Point H to Point J] between three groups
Point I
For the distance from the lingual cortex to the IAN canal at the level of the mandibular third molar, the mean of the right and left sides was computed and was observed to be 1.550 ± 0.307 (SD) [Table 2]. The mean distance of Point I in Group 1 was 1.500 ± 0.202, Group 2 was 1.394 ± 0.246, and Group 3 was 1.757 ± 0.346. A one-way ANOVA test was significant (P = 0.002) among the three groups. Multiple comparison tests between the groups revealed that Group 3 was significantly higher compared to Group 1 (P = 0.03) and Group 2 (P = 0.002). However, no significant difference was observed between Groups 1 and 2 (P = 0.54) [Table 5] [Graph 5].
Point J
For the distance from the lingual cortex to the IAN canal at the level of the mandibular third molar, the mean of the right and left sides was computed and was observed to be 1.370 ± 0.395 (SD) [Table 2]. The mean distance of Point J in Group 1 was 1.014 ± 0.216, Group 2 was 1.392 ± 0.281, and Group 3 was 1.704 ± 0.328. A one-way ANOVA test was significant (P < 0.001) among the three groups. Multiple comparison tests between the groups revealed that Group 3 was significantly higher compared to Group 1 (P < 0.001) and Group 2 (P = 0.01). Similarly, a significant difference was observed between Groups 1 and 2 (P = 0.002) [Table 5].
DISCUSSSION
An estimation of the spatial relation of the mandibular canal to the mandibular cortices can be clinically useful in guiding surgery. It is also necessary to orientate the various planes to clinical reference points. The medial most edge of the mandibular foramen and the center of the mental foramen can be appreciated intra-operatively. The oblique sagittal plane was orientated with these two reference points. To obtain the most accurate transverse dimensions, the coronal plane can be referenced as being at right angles to the oblique sagittal plane. This helped to determine the minimum distance of the mandibular canal from the outer surface of the buccal cortex and thereby the safest position to place the vertical osteotomy cuts for the Dalpont modification to the BSSO.[2]
Distance from the outer buccal cortex to the outer surface of the IAN canal was analyzed at three different points (at the level of mandibular first, second, and third molars) in all the three skeletal groups (Class I, Class II, and Class III).
Based on our study, it was found that the average of linear measurement of Point A was highest among the Class II group when compared to the Class I and Class III groups suggesting that the buccal cortical thickness is higher in patients with the Class II group at Point A. Similar results were obtained at Point B also, thereby inferring that the buccal cortical plate thickness is highest in the second molar region among each group. Similar results were obtained in a study conducted by Nagadia et al.,[3] and this study also concluded that the vertical buccal cut for SSRO should be near the second molar where the bone is thickest and the mandibular canal is furthest from the buccal cortex and that the safe depth for the vertical buccal cut is 4.8 mm, which corresponds to the minimum horizontal distance.
Based on our results, linear measurement of Point C was least among the Class III group when compared among the other groups suggesting that the inferior alveolar canal is much closer to the buccal cortex. Additionally, Yamauchi et al.[4] suggested that neurosensory disturbance is more in patients with shorter buccal cortical thickness and long mandibular angle. Buccal cortical thickness was lesser in patients of prognathism than in retrognathism.[4]
With regard to the measurement of buccal cortical thickness at the second and third molar region, Promma L et al.[5] found that the thickest buccal cortical bone thickness was located at the mandibular second molar and third molar region.
Based on the results of our study, the buccal thickness at all three regions (at first, second, and third molars) was highest among the Class II group followed by Class I and least among the Class III group. This was also in accordance with the results of the study conducted by Ozdemir et al.[6] where in all areas measured, the lowest values were in the high-angle group, followed by the normal group; the highest values were measured in the low-angle patients. However according to the study conducted by Khorshidi H et al.,[7] it has been suggested that as much as the distance from the buccal aspect of the IAN canal to the outer buccal cortical margin was shorter, the occurrence of neurosensory disturbances (NSD) of the IAN after BSSO was the more frequent.
However, Class III mandibular skeletal relationships are the most common indication for BSSO. Based on the results of our study, we also found that in the Class III group, the thickness of the buccal cortex was minimal among the Class II and Class I groups, and it also depends on the severity of the prognathism.
The distance from the inner buccal cortex to the outer surface of the inferior alveolar canal was measured at three different regions, i.e., at the mesial root of the first molar (Point D) and mesial root of the second molar (Point E) among all the three groups and compared the same.
Based on the results of our study, we found that this linear measurement of Point E was highest among the Class II group and then the Class I and Class III, and also when compared between the first and the second molar, this measurement was highest in the second molar region among all the three groups. These results are similar to the study conducted by Balaji et al.,[8] which evaluated the linear relationship of the canal to the buccal and lingual cortex (inner and outer) and to the periapex of the molar teeth. Similar results were also obtained in a study conducted by Yu et al.[9] Other studies conducted by Nagadia et al.,[3] Promma et al.[5] Huang et al.,[10] AlJandan et al.,[11] and Massey et al.[12] also revealed the thickest buccal cortical bone surrounding the inferior alveolar canal, indicating that the osteotomy depth should be similar to the width of fissure bur for less chances of IAN damage.
The shortest buccal bone thickness at the second molar region (Point F) was measured, and based on our study, this shortest thickness was highest among the Class II group, and the values among the Class I and Class II groups were similar. This might be due to the masseter attachment in the posterior region of the second molar.
Point G which is the cortical width of the IAN at the second molar was the highest among the Class II group and least among the Class I group. The study conducted by Balaji et al.[8] showed that the IAN canal diameter begins to narrow down at the first molar region than in the second molar region, as the thickness of vessels greatly decreases similar to the results of our study.
Similarly, this study also evaluated the lingual cortical plate thickness at three different points where Point H denotes the distance from the lingual cortex to the IAN at the level of the mandibular first molar, Point I was this distance at the level of the mandibular second molar, and Point J was the distance of the lingual bone thickness at the level of the third molar. When compared, the Class III group has higher scores compared to Class I and Class II with no significance among the Class I and II groups.
Points H and I can be compared to that of the study conducted by Balaji et al.,[8] indicating that the thicker lingual cortical plate at the first molar than at the second molar due to the oblique course of mylohyoid line and the consistent remodeling of muscle attachments in this region. However, our results are contraindication to the studies conducted by Bürklein et al.[13] and Koivisto et al.[14] which showed thinner lingual bone over the distal roots of the first molar.
The variations in our study as compared to that of others could be because of the type of radiographic method used, thickness of slices, image quality, and measurement tools used.
CONCLUSION
The anatomy of the mandible and IAN canal plays a pivotal role in determining the mandibular osteotomies. However, orthognathic surgeries are associated with a wide array of complications. It is also influenced by factors such as the experience of the surgeon the course and direction of splits along with the altered anatomical features. Our study only examined some anatomical features such as the distance from the outer buccal cortex to the IAN canal, the distance from the inner buccal cortex to the IAN canal at various positions, the shortest buccal thickness at the second molar region, the intracortical width of IAN canal, and the distance from lingual cortex to IAN canal. This study also analyzed the variation of the nerve position in patient groups with different mandibular skeletal relationships.
Based on the results of our study, it was found that:
The mean buccal cortical thickness was least in the Class III group at mandibular molar regions.
The shortest buccal thickness of bone is least among subjects with Class I mandibular skeletal relationship compared to Class II and Class III.
The innercortical width of the IAN canal is maximum in subjects with Class III mandibular skeletal relationship when compared to Class I and Class II.
The lingual cortical thickness at the level of mandibular molars is thicker in subjects with Class III mandibular skeletal relationship when compared to Class I and Class II subjects.
Hence, while planning mandibular osteotomies, the surgeon should accurately analyze the anatomical structures to provide an optimal treatment that is suitable for the patient.
Conflicts of interest
There are no conflicts of interest.
Funding Statement
Nil.
REFERENCES
- 1.Yu IH, Wong YK. Evaluation of mandibular anatomy related to sagittal split ramus osteotomy using 3-dimensional computed tomography scan images. Int J Oral Maxillofac Surg. 2008;37:521–8. doi: 10.1016/j.ijom.2008.03.003. [DOI] [PubMed] [Google Scholar]
- 2.Agbaje JO, Salem AS, Lambrichts I, Jacobs R, Politis C. Systematic review of the incidence of inferior alveolar nerve injury in bilateral sagittal split osteotomy and the assessment of neurosensory disturbances. Int J Oral Maxillofac Surg. 2015;44:447–51. doi: 10.1016/j.ijom.2014.11.010. [DOI] [PubMed] [Google Scholar]
- 3.Nagadia R, Tay ABG, Chan LL, Chan ESY. The spatial location of the mandibular canal in Chinese: A CT study. Int J Oral Maxillofac Surg. 2011;40:1401–5. doi: 10.1016/j.ijom.2011.07.904. [DOI] [PubMed] [Google Scholar]
- 4.Yamauchi K, Takahashi T, Kaneuji T, Nogami S, Yamamoto N, Miyamoto I, et al. Risk factors for neurosensory disturbance after bilateral sagittal split osteotomy based on position of mandibular canal and morphology of mandibular angle. J Oral Maxillofac Surg. 2012;70:401–6. doi: 10.1016/j.joms.2011.01.040. [DOI] [PubMed] [Google Scholar]
- 5.Promma L, Sakulsak N, Putiwat P, Amarttayakong P, Iamsaard S, Trakulsuk H, et al. Cortical bone thickness of the mandibular canal and implications for bilateral sagittal split osteotomy: A cadaveric study. Int J Oral Maxillofac Surg. 2017;46:572–7. doi: 10.1016/j.ijom.2016.12.008. [DOI] [PubMed] [Google Scholar]
- 6.Ozdemir F, Tozlu M, Germec-Cakan D. Cortical bone thickness of the alveolar process measured with cone-beam computed tomography in patients with different facial types. Am J Orthod Dentofacial Orthop. 2013;143:190–6. doi: 10.1016/j.ajodo.2012.09.013. [DOI] [PubMed] [Google Scholar]
- 7.Khorshidi H, Raoofi S, Ghapanchi J, Shahidi S, Paknahad M. Cone beam computed tomographic analysis of the course and position of mandibular canal. J Maxillofac Oral Surg. 2017;16:306–11. doi: 10.1007/s12663-016-0956-9. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 8.Balaji SM, Krishnaswamy NR, Kumar SM, Rooban T. Inferior alveolar nerve canal position among South Indians: A cone beam computed tomographic pilot study. Ann Maxillofac Surg. 2012;2:51–5. doi: 10.4103/2231-0746.95319. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 9.Yu IH, Wong YK. Evaluation of mandibular anatomy related to sagittal split ramus osteotomy using 3-dimensional computed tomography scan images. Int J Oral Maxillofac Surg. 2008;37:521–8. doi: 10.1016/j.ijom.2008.03.003. [DOI] [PubMed] [Google Scholar]
- 10.Huang CY, Liao YF. Anatomical position of the mandibular canal in relation to the buccal cortical bone in Chinese patients with different dentofacial relationships. J Formos Med Assoc. 2016;115:981–90. doi: 10.1016/j.jfma.2015.10.004. [DOI] [PubMed] [Google Scholar]
- 11.AlJandan BA, AlSulaiman AA, Marei HF, Syed FA, Almana M. Thickness of buccal bone in the mandible and its clinical significance in monocortical screws placement. ACBCT analysis. Int J Oral Maxillofac Surg. 2013;42:77–81. doi: 10.1016/j.ijom.2012.06.009. [DOI] [PubMed] [Google Scholar]
- 12.Massey ND, Galil KA, Wilson TD. Determining position of the inferior alveolar nerve via anatomical dissection and micro-computed tomography in preparation for dental implants. J Can Dent Assoc. 2013;79:d39. [PubMed] [Google Scholar]
- 13.Bürklein S, Grund C, Schäfer E. Relationship between root apices and the mandibular canal: A cone-beam computed tomographic analysis in a German population. J Endod. 2015;41:1696–700. doi: 10.1016/j.joen.2015.06.016. [DOI] [PubMed] [Google Scholar]
- 14.Koivisto T, Chiona D, Milroy LL, McClanahan SB, Ahmad M, Bowles WR, et al. Mandibular canal location: Cone-beam computed tomography examination. J Endod. 2016;42:1018–21. doi: 10.1016/j.joen.2016.03.004. [DOI] [PubMed] [Google Scholar]
