Error in Figure
In the original publication [1], there was a mistake in Figure 9 as published. Two images, labeled as “PCL/PVA-Met—7 days—10×” and “PCL/PVA-Met—7 days—20×,” were inadvertently taken from the 3-day group and mistakenly included in the 7-day panel during figure assembly. The corrected Figure 9 appears below. The authors state that the scientific conclusions are unaffected. This correction was approved by the Academic Editor. The original publication has also been updated.
Figure 9.
Fluorescent microscopy images of the DAPI stained fibroblast cells attached to the hybrid scaffolds, days 3 and 7 post-cell culture.
Footnotes
Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.
Reference
- 1.Harmanci S., Dutta A., Cesur S., Sahin A., Gunduz O., Kalaskar D.M., Ustundag C.B. Production of 3D Printed Bi-Layer and Tri-Layer Sandwich Scaffolds with Polycaprolactone and Poly (vinyl alcohol)-Metformin towards Diabetic Wound Healing. Polymers. 2022;14:5306. doi: 10.3390/polym14235306. [DOI] [PMC free article] [PubMed] [Google Scholar]