Skip to main content
NCBI home page
ACS AuthorChoice logoLink to ACS AuthorChoice
. 2026 Feb 19;103(3):1620–1628. doi: 10.1021/acs.jchemed.5c01804

Exploring Magnetic Exchange Coupling: Synthesis and Characterization of Magnetite-Based Composites

Mostafa G Mohamed 1,2, James Lambe 1,3, Kenneth Hernandez 1, Carlos Blank 1, Camilo Bedoya López 1, Carlos E Castano 1,*
PMCID: PMC12980721  PMID: 41836904

Abstract

This laboratory experiment is designed for Research Experiences for Undergraduates (REU) programs, offering students immersive, hands-on research opportunities in the synthesis and characterization of magnetic materials. It emphasizes the foundational principles of magnetism, explores the essential properties of magnetic materials, and introduces various characterization techniques. The protocol highlights the significance of magnetite-based materials in diverse applications, providing a focused investigation into magnetic exchange coupling and enabling students to connect fundamental magnetic phenomena with cutting-edge research. Students conduct four experiments to prepare magnetite-based composites that incorporate both titanium and cobalt oxides. This approach allows them to explore magnetic exchange coupling and examine the resulting magnetic properties. By combining magnetite (Fe3O4), a well-known magnetic material, with titanium dioxide (TiO2), a diamagnetic oxide, and cobalt ferrite (CoFe2O4), a strong ferrimagnetic oxide with high coercivity, students investigate how the interaction between soft and hard magnetic phases affects overall magnetization behavior and magnetic coupling efficiency. Students then characterize these composites using techniques such as X-ray diffraction and vibrating sample magnetometry to study their magnetic properties and chemical structure, deepening their understanding of how these factors influence material behavior. This integrated approach reinforces core concepts of magnetism, materials science, and engineering while equipping students with practical skills in material preparation and characterization.

Keywords: Biomedical applications, Magnetic exchange coupling, Environmental remediation

graphic file with name ed5c01804_0010.jpg

graphic file with name ed5c01804_0009.jpg

1. Introduction/Background

A solid foundation in materials science is essential for undergraduate engineering students, as it bridges the gap between fundamental scientific principles and real-world applications. Understanding how materials function, how they are prepared, and how their properties can be tailored is essential for driving innovation in various engineering fields, including electronics, energy, and biomedical engineering.

Magnetic materials, especially those based on magnetite (Fe3O4), are of particular importance in engineering. Magnetite’s unique properties of high saturation magnetization, electrical conductivity, and chemical stability make it valuable for applications such as sensors, data storage, spintronics, and electromagnetic shielding. − Its magneto-crystalline anisotropy arising from the specific arrangement and coupling of iron cations in the crystal lattice enable advanced functionalities in devices that rely on the control and manipulation of magnetic fields. , For instance, in spintronic devices, the manipulation of electron spin (rather than charge) relies heavily on the magnetic coupling and polarization properties of materials like magnetite.

The concept of magnetic coupling exchange, including the interaction between magnetic moments in composite or multiphase materials, is essential to the design of next-generation magnetic devices. By coupling magnetite with other materials with different magnetic behavior, it is possible to alter and enhance key properties, including coercivity, remanence, and overall magnetic response. Such modifications are essential for optimizing materials for specific engineering functions, including high-density data storage, efficient electromagnetic sensors, and robust actuators. −

A review of the educational literature reveals that many previous studies have highlighted the value of magnetic materials in undergraduate education, often focusing on experimental protocols for material preparation. These protocols typically integrate chemical synthesis methods, such as coprecipitation, sol–gel, and hydrothermal methods, enabling students to gain hands-on experience in preparing magnetic materials and exploring how preparation conditions affect their properties. − However, a standard limitation of these studies is the lack of emphasis on the magnetic exchange coupling concept and the characterization techniques used in this area, such as Vibrating Sample Magnetometry (VSM), which are essential for understanding and quantifying the magnetic behavior of materials. In particular, the hysteresis loop, which is a fundamental concept in magnetism that describes the relationship between magnetization and applied magnetic field, remains underexplored in many undergraduate experiments, despite its critical importance for interpreting material performance and characteristics in real-world applications. Additionally, X-ray diffraction (XRD) can be used as an essential characterization tool for defining and monitoring changes in material phases during preparation and modification. Powder X-ray diffraction can be found in literature with the acronym PXRD to distinguish from single crystal XRD, but it is often simply referred to just as XRD. As a reference, XRD in this work will represent powder X-ray diffraction. As XRD provides detailed information about the crystalline structure, it allows students to learn how to identify and prove the formation of desired phases or detect new ones resulting from different preparation methods and during the coupling processes. This insight is crucial for correlating structural changes with observed magnetic or functional properties, and for ensuring the success of the chemical preparation techniques employed.

In conclusion, this laboratory protocol aims to provide students with direct experience in both the chemical preparation and magnetic coupling of magnetite-based materials. Using coprecipitation, students prepare magnetite and couple it with TiO2 and cobalt ferrite, observing how these couplings influence the resulting magnetic properties. For example, Fe3O4/TiO2 coupling may lead to changes in surface properties and potentially reduce saturation magnetization due to the nonmagnetic nature of TiO2, but could enhance photocatalytic or electronic functionalities. Meanwhile, magnetite-cobalt ferrite Fe3O4/CoFe2O4 coupling is expected to increase coercivity and magnetic anisotropy, as cobalt ferrite is a hard magnetic material, potentially resulting in a composite with improved magnetic stability and tunable properties suitable for advanced engineering applications.

Through this integrated approach, students should not only learn the preparation techniques but also gain insight into the critical role of magnetic exchange coupling and the necessity of characterization methods such as VSM and XRD in the development and optimization of magnetic materials for engineering innovation.

2. Experimental Work

This experiment series is designed for Research Experience for Undergraduate Program (REU) sophomores or juniors with a materials science and engineering background, comprising five weekly 3-h sessions. REUs are competitive research programs that allow undergraduate students to immerse themselves in ongoing research-funded projects over the summer; however, it is often challenging to become proficient in synthesis and characterization within such a short period without guidance, and this work summarizes our best practices after years of experience onboarding undergraduate students in summer experiences such as REUs. In the first four sessions, one-third of the time is dedicated to theoretical background and scientific fundamentals, with the remaining time devoted to practical and experimental work. In the final session, the student groups (2–3 students) should present their results and discuss them with instructors as part of the research experience. The flowchart of the work to be conducted over the 5 weeks is presented in Figure .

1.

1

Open in a new tab

Flowchart outlining the experimental work to be conducted over the 5 weeks.

Week One: Introduction and Magnetite Preparation

The first session opens with a detailed overview of the fundamental concepts of magnetic materials, focusing on the various types of magnetism such as paramagnetism, diamagnetism, ferromagnetism, Antiferromagnetism and Ferrimagnetism, see Figure . Real-world examples are discussed to illustrate how these magnetic behaviors manifest in various materials, thereby establishing a strong conceptual foundation for the experimental work that follows.

2.

2

Open in a new tab

Illustration depicting different types of magnetic materials.

Following this, a thorough explanation of the experimental workflow is provided to ensure all students understand each step of the process. The experiment for the first week focuses on the preparation of nanostructured magnetite (Fe3O4) using the coprecipitation method, a technique extensively described in scientific literature. The procedure involves the controlled coprecipitation of iron salts under alkaline conditions, resulting in the formation of uniform magnetite nanoparticles. The coprecipitation method for preparing magnetite (Fe3O4) nanoparticles involves dissolving iron­(III) chloride hexahydrate (FeCl3·6H2O) and iron­(II) sulfate heptahydrate (FeSO4·7H2O) in deionized water, typically maintaining a Fe3+:Fe2+ molar ratio of 2:1 (100 mL of 0.2 mol L–1 FeCl3·6H2O and 100 mL of 0.1 mol L–1 FeSO4·7H2O), as widely reported in the literature. − The mixed iron solution is heated to 60 °C with constant stirring for 15 min, and a 2 mol L–1 sodium hydroxide (NaOH) solution is added dropwise until the pH reaches 10–11, resulting in the immediate formation of a black magnetite precipitate. Students can observe the formation of magnetite nanoparticles by positioning a strong magnet near the reaction beaker as presented in Figure .

3.

3

Open in a new tab

Preparation of magnetite nanoparticles.

The mixture is then stirred at the same temperature for 30 min to ensure complete reaction and particle growth. The synthesized nanoparticles were first allowed to cool, then transferred into centrifuge tubes and centrifuged at 5000 rpm for 10 min. The supernatant was carefully decanted to separate the nanoparticle pellet. This was followed by two successive washes with deionized water to effectively remove any residual ions or impurities. Finally, the purified magnetite nanoparticles were dried under vacuum at 40 °C to remove moisture while preserving their structural integrity. A comprehensive description of the experimental procedure and the materials employed is provided in the Supporting Information (Experiment 1).

In this experiment, Fe3O4 nanoparticles were synthesized via coprecipitation method to allow students to learn about reaction kinetics, pH management, and thermal control during the procedure. Alternatively, equivalent magnetite nanoparticles can be prepared more rapidly at room temperature using FeCl2 with dilute NH3, as reported by (Dalverny et al. 2017).

Week Two: Magnetite Composite Preparation

The second session focuses on the basics of magnetic coupling, discussing how the procedures and the resulting chemical structure can affect the magnetic properties of the materials produced, with particular attention to the differences between soft, hard and nonmagnetic phases (Supporting Information: Experiment 2).

During the experimental session, students should be divided into two groups. Each group is responsible for conducting experiments on specific magnetic couplings: one group can work with titanium dioxide, while the other focuses on cobalt ferrite.

Students take the magnetite nanoparticles prepared in the previous session and begin coupling them with titanium dioxide (TiO2) and cobalt ferrite (CoFe2O4), gaining hands-on experience with composite magnetic materials (schematic diagram for the preparation procedure can be found in Figure ). The process starts with a pretreatment step, , where the magnetite nanoparticles are dispersed in a citric acid solution and sonicated for 10 min, allowing citric acid to chemisorb onto the surface and enhance the dispersion and stability of the particles. In this step the students learn about the surface modification and the concept of pretreatment for the heterogeneous nucleation of the titanium dioxide and ferrite on the magnetite as secondary phase. For the preparation of Fe3O4/TiO2 composite, , the citric acid-modified magnetite nanoparticles are first suspended in deionized water. Separately, titanium tetrachloride (TiCl4) is hydrolyzed in dilute HCl solution to form a stable TiOCl2 precursor, which is then added dropwise to the magnetite suspension under controlled temperature and pH conditions. Hydrolysis and TiO2 formation on the presence of magnetite are completed by subsequent dropwise addition of NaOH solution to reach pH 10–12, followed by heating and stirring. The addition of TiCl4 should be carried out only under the direct supervision of senior researchers or instructors, as titanium tetrachloride is highly fuming and extremely corrosive. Through this procedure, in addition to the scientific concept of the magnetic exchange coupling and preparation method, students are expected to gain practical training in the safe handling of volatile, moisture-sensitive reagents (like TiCl4) and in their controlled introduction into a reaction system. However, alternative precursors to TiCl4 (e.g., titanium­(IV) ethoxide (TEOT), titanium­(IV) isopropoxide (TTIP), and titanium­(IV) butoxide (TBT)) can be used with some modification on the procedure to achieve the same composite structure with fewer safety considerations. ,

4.

4

Open in a new tab

Schematic representation of the preparation procedures for the various.

For the preparation of Fe3O4/CoFe2O4 composites, , cobalt nitrate hexahydrate, and iron­(III) chloride hexahydrate are dissolved in water and added to the pretreated magnetite suspension, followed by the gradual addition of NaOH to induce coprecipitation of cobalt ferrite onto the magnetite, again under controlled temperature and stirring. The full procedures with the quantities used can be found in (Supporting Information: ).

By the end of this session, students should have developed practical competence in weighing reagents, preparing solutions of different concentrations, performing stoichiometric and concentration calculations, and setting up synthetic procedures. They should also gain experience in the safe handling of reagents with special characteristics, such as TiCl4, while simultaneously deepening their theoretical understanding of magnetic behavior and the role of magnetic coupling in determining material properties.

Week Three/Four: Materials Characterization

In week three, the theoretical part begins with a recap and a focused overview of X-ray diffraction (XRD). The instructor explains how XRD patterns are interpreted to distinguish between different phases present in the samples and to confirm the successful formation of composite structures such as Fe3O4/TiO2 and Fe3O4/CoFe2O4. Following this in Week four, the basics of vibrating sample magnetometry (VSM) will be introduced, covering the fundamental principles of magnetic measurements, hysteresis loop basics, and key parameters such as saturation magnetization, coercivity, and remanence, and how these relate to the soft and hard magnetic properties discussed in previous sessions (Supporting Information: Experiments 3 and 4).

Following the theoretical discussion, students move on to the practical part, where they analyze samples prepared in previous weeks using both XRD and VSM techniques. The instructors should conduct a live demonstration of the proper procedures for sample preparation and loading for both instruments. Groups rotate between the two devices, and due to the limitations of these devices and the long time for each sample, graduate students/postdocs operate the instruments and run all samples collected from the various student groups, ensuring thorough characterization of each group’s materials. The results then should be returned to the students to facilitate data plotting and interpretation.

Week Five: Presentation and Discussion

In the final week, students should be previously informed to plot their data for both XRD and VSM analyses. Each group is required to explain the XRD results in the context of phase analysis, highlighting the differences between magnetite and its coupling with other materials. For the VSM analysis, each group presents the hysteresis loop of magnetite coupled with one of the materials, comparing key parameters such as saturation and coercivity. They should also explain how coupling affects the magnetic properties of the materials and discuss potential applications. All data must be presented in slides, accompanied by explanations.

3. Hazard and Safety

Before beginning the program, all students should complete comprehensive safety training covering the correct use of personal protective equipment (PPE), emergency response protocols (including the locations and operation of eye-wash stations and chemical showers), in addition to the identification and classification of chemical hazards.

All procedures were performed in a certified fume hood to minimize exposure to harmful vapors. Standard PPE, including lab coats, chemical-resistant goggles, and appropriate gloves (nitrile), should be always worn.

When handling powders, students should work in a well-controlled environment that minimizes dust formation and airborne dispersion, such as a fume hood or enclosed balance area. They must wear full personal protective equipment, including a lab coat, appropriate gloves, safety goggles, and a suitable dust mask or respirator to reduce inhalation and contact risks.

Some chemicals used in these experiments, such as cobalt compounds (e.g., Co­(NO3)2), are toxic with chronic exposure, while others like NaOH is highly corrosive to skin, eyes, and respiratory tract. So, these materials should be handled in a fume hood with nitrile gloves, safety goggles, and lab coat.

In this experimental program, one of the aims is to give students supervised, hands-on experience with a reagent that demands special care. All operations involving TiCl4 are done under the direct supervision of senior researchers or the instructors, who guide the students through safe transfer, controlled addition to the magnetite suspension, and correct disposal of TiCl4-containing waste (The specific precautions of handling the TiCl4 is mentioned in details in the Safety notes after the procedures (Supporting Information, ).

4. Results and Discussion

4.1. Powder X-ray Diffraction (XRD)

After preparing the magnetite and coupling it with titanium dioxide and cobalt ferrite, the next step involves analyzing the prepared materials. Each group should receive the raw XRD data along with various powder diffraction files to plot the XRD results and conduct the necessary interpretations. Students are expected to carefully examine the provided XRD patterns by matching the observed diffraction peaks with standard reference patterns to confirm the formation of the targeted composites Fe3O4/CoFe2O4 and Fe3O4/TiO2 by verifying the coexistence of characteristic peaks from both magnetite and the secondary phase (cobalt ferrite or titanium dioxide) and assessing the crystallinity of the samples.

Figure shows the XRD results for the prepared materials, obtained through the coprecipitation method in the synthesis of magnetite and its coupling with titanium dioxide and cobalt ferrite. In this section, we provide a template for reporting XRD results to share with students after they present their data, demonstrating best practices in reporting such characterization data. For the Fe3O4/CoFe2O4 composite, as both Fe3O4 and CoFe2O4 have cubic spinel structures with nearly identical lattice parameters, leading to very similar XRD patterns where main reflections such as (220), (311), (400), (422), (511), and (440) almost exactly overlap. Previous studies showed that XRD alone cannot reliably distinguish between magnetite and cobalt ferrite composites structures, especially with small percentages of cobalt added to the structure. − In analyzing the XRD of these composites, students should learn how the XRD of materials with similar crystal structures and chemical compositions may show overlapping diffraction patterns. Therefore, researchers at various stages of their research need to use complementary characterization techniques to verify their theory and prove their material’s structure. Additionally, while XRD may reveal no significant differences, students observe clear distinctions in the magnetic parameters through VSM measurements. On the other hand, the XRD pattern for the Fe3O4/TiO2 composite clearly displays the characteristic Fe3O4 peaks alongside prominent peaks (101), (004), (200)) that match the anatase phase of TiO2. It is also observed that the broadening of the anatase peaks can be attributed primarily to the nanoscale crystallite size of the anatase phase and the presence of lattice strain. When TiO2 exists as nanocrystals, the reduced coherence length of atomic planes leads to a significant broadening of diffraction peaks, as described by the Scherrer equation. Crystallite sizes below about 10–20 nm are particularly associated with broadened XRD reflections. ,

5.

5

Open in a new tab

XRD of magnetite and the prepared composites.

4.2. Vibrating Sample Magnetometry (VSM)

The vibrating sample magnetometry (VSM) results for the prepared magnetite and composites are presented in Figure and Table . The aim of this section is for students to plot their data to learn about the hysteresis loop and begin extracting various parameters, including coercivity (Hc), saturation magnetization (Ms), and retentivity (Mr).

6.

6

Open in a new tab

Hysteresis loop of Fe3O4, Fe3O4/TiO2, and Fe3O4/CoFe2O4.

1. Saturation Magnetization (Ms), Retentivity (Mr), and Coercivity (HC) of the Prepared Materials.

Material Saturation Magnetization (emu/g) Coercivity (Oe) Retentivity (emu/g)
Fe3O4 63.31 16.44 1.72
Fe3O4/TiO2 12.01 14.71 0.37
Fe3O4/CoFe2O4 43.93 264.1 5.2
Open in a new tab

The prepared magnetite nanomaterial exhibits a hysteresis loop with a relatively steep approach to saturation and a well-defined narrow opening, characteristic of a soft single-domain or near-single-domain system. The corresponding saturation magnetization (Ms) of 63.31 emu g–1 is consistent with literature values for Fe3O4 nanoparticles with an average size around 30 nm. This estimation is further supported by the coercivity (Hc) value of 16.44 Oe, aligning with established trends showing that coercivity increases with particle size up to the single-domain limit, then decreases as particles transition into multidomain structures. The retentivity (Mr), measured at 1.72 emu/g, also supports the ∼ 30 nm size estimation, as it follows a similar trend to the coercivity of single-domain particles, which tend to retain magnetization more effectively than multidomain ones due to the absence of competing magnetic domains. − In this section, one of the important targets is relating the shape of the hysteresis loop and the change in the magnetic properties with the particle size and learning about the critical sizes as can be found in the (Supporting Information, ).

When analyzing the magnetic behavior of the prepared composites, a significant reduction in saturation magnetization was observed, which aligns the literature on nanostructures involving nonmagnetic or weak magnetic material. In the Fe3O4/TiO2 composite, the saturation magnetization (Ms) dropped from 63.31 emu/g in the pure magnetite sample to 12.01 emu/g, indicating substantial magnetic suppression. This pronounced decrease can be attributed to electron migration and spin disorder at the interface of the two materials, where charge transfer into the TiO2 disrupts the alignment of magnetic spins in the magnetite. This phenomenon, commonly referred to as the magnetic dead layer or charge-transfer-induced magnetization suppression, effectively reduces the net magnetization reference as can be found in the illustration in Figure . Because this dead layer mainly affects how many spins can align rather than how strongly they are pinned, the impact on coercivity (Hc) is modest, as reflected by the small decrease to 14.71 Oe that still reflects a very soft magnetic system. Coercivity (Hc) in such composites is governed more by effective anisotropy and domain-wall pinning than by the mere loss of saturated spins, so a disordered surface does not dramatically harden the material. In contrast, retentivity (Mr) is very sensitive to the fraction of coherently aligned spins; once the field is removed, the interfacial spin disorder and reduced interparticle interactions allow the magnetization to relax more easily to near-zero, which explains the low remanence value of 0.37 emu/g. −

7.

7

Open in a new tab

Schematic illustration of dead layer formation at the Fe3O4/TiO2 interface: (a) Fe3O4 and TiO2 nanoparticles in the composite structure; and (b) an interfacial dead layer.

The Fe3O4/CoFe2O4 composite shows the typical fingerprint of a soft–hard exchange-coupled system, where the hard CoFe2O4 strongly modifies the reversal of the soft Fe3O4. The saturation magnetization (Ms) of 43.93 emu/g is lower than that of pure Fe3O4 because part of the composite mass is the cobalt ferrite shell, whose intrinsic Ms is lower than magnetite, and because some interfacial spins become canted or frustrated rather than fully aligned. Nevertheless, the remaining magnetically active Fe3O4 still contributes substantially, so the decrease in Ms is moderate rather than drastic, unlike the case of the Fe3O4/TiO2 composite.

On the other hand, what changes most dramatically is the hysteresis shape: the coercivity (Hc) increases to 264.1 Oe and the retentivity (Mr) to 5.2 emu/g, indicating a much harder and more magnetically stable material. Magnetic anisotropy means that a material’s magnetization prefers specific directions, creating an energy barrier that resists spin reorientation. Because CoFe2O4 has high magnetocrystalline anisotropy, it acts as a rigid anchor for the spins at the interface and, when coupled to the lower-anisotropy Fe3O4 phase, it strongly controls the overall switching behavior, the energy barrier for magnetization reversal, and the efficiency of exchange coupling between the two phases. Through this strong exchange coupling, the soft Fe3O4 moments near the interface are forced to rotate coherently with the hard CoFe2O4 shell, so reversing the net magnetization now requires overcoming the anisotropy barriers of both components. Consequently, domain-wall motion and spin rotation are more strongly hindered, which directly leads to the observed increase in coercivity (Hc) and the larger remanent magnetization (Mr) after removal of the external field.

From a microstructural perspective and to get the idea of the exchange more imaginable to the students, the system can be viewed as an assumption of exchange-spring magnet on the nanoscale as found in the illustration Figure . Under an applied field, the soft Fe3O4 aligns easily and helps pull the harder CoFe2O4 shell toward saturation, contributing to a relatively high saturation magnetization (Ms) for a hard/soft mixture. During reversal, the outer shell resists switching and exerts a restoring torque on the core spins, delaying their reversal and giving rise to the enhanced loop squareness and magnetic hardness you observe. ,

8.

8

Open in a new tab

Schematic illustration of the exchange coupling in the Fe3O4/CoFe2O4 composite under varying magnetic fields. (A) At zero field (H = 0), Fe3O4 and CoFe2O4 phases exhibit a random arrangement. (B) Under applied field (+H), soft Fe3O4 aligns, facilitating alignment of hard CoFe2O4 toward saturation. (C) Field reversal (−H) induces delayed reversal of CoFe2O4 due to interfacial exchange coupling.

4.3. Pedagogical Goals

The primary pedagogical goal of this laboratory experiment is to engage students in the process of synthesis, characterization, and interpretation of functional nanomaterials through real-world experimental procedures. By integrating preparation techniques and characterization methods such as coprecipitation synthesis, X-ray diffraction, and vibrating sample magnetometry, students gain hands-on experience with methods commonly used in materials chemistry and nanotechnology research. Through analyzing XRD patterns, students are trained to identify crystalline phases, assess crystallite sizes, and recognize structural features. Similarly, interpreting VSM data introduces learners to the hysteresis loop and key magnetic parameters such as saturation magnetization, coercivity, and retentivity, and how they correlate with nanoparticle size, composition, and structural interfaces in the context of magnetic exchange coupling. This experience fosters the development of essential research skills, including critical analysis, data interpretation, and the ability to correlate experimental results with structural and functional properties of nanomaterials.

5. Conclusions

These laboratory experiments provide students with direct experience in synthesizing magnetite-based composites, offering authentic engagement with advanced materials chemistry and engineering. Through coupling Fe3O4 with TiO2 and CoFe2O4, students explore the concept of magnetic exchange coupling and examine how different partners modify the magnetic response and potential functional applications of the composites.

Students also learn to process and interpret data from two key characterization techniques, XRD and VSM, including plotting, analyzing, and critically discussing their results. Group discussion of the data is emphasized to foster scientific dialogue and develop critical thinking in quantitative analysis. Overall, the integration of synthesis, structural characterization, and magnetic property evaluation provides a robust, inquiry driven learning experience aligned with current research practice; this approach has already been successfully implemented in two REU cohorts, with one student contributing as a coauthor to the present work.

Supplementary Material

ed5c01804_si_001.pdf (2.5MB, pdf)
ed5c01804_si_002.docx (21.9MB, docx)

Acknowledgments

The authors acknowledge the NSF Career CMMI-2042982, as well as the REU Site in Magnetics supported by the NSF DMR-2349694 award. The authors also express gratitude for access to the Nanomaterials Core Characterization Facility at Virginia Commonwealth University and appreciate the assistance provided by Dr. Mayer and Dr. Pestov. Additionally, the authors thank the Fulbright Program for enabling the postdoctoral training.

The Supporting Information is available at https://pubs.acs.org/doi/10.1021/acs.jchemed.5c01804.

  • Laboratory guide for students, providing basics concepts and practical instructions for sample preparation, outlining the experimental steps, and explaining how to interpret the results they obtain. Laboratory Guide REU/Magnetics-Program (PDF, DOCX)

‡.

Alan Levin Department of Mechanical and Nuclear Engineering, Kansas State University, Manhattan, KS 66503, USA, cecastano@ksu.edu

The authors declare no competing financial interest.

†.

J.L. and K.H. are undergraduate students.

References

  1. Callister, W. D., Jr. ; Rethwish, D. G. . Materials Science and Engineering An Introduction; Wiley: Hoboken, NJ, 2018. [Google Scholar]
  2. Liu M., Ye Y., Ye J., Gao T., Wang D., Chen G., Song Z.. Recent Advances of Magnetite (Fe3O4)-Based Magnetic Materials in Catalytic Applications. Magnetochemistry. 2023;9(4):110. doi: 10.3390/magnetochemistry9040110. [DOI] [Google Scholar]
  3. Kounsalye J. S., Dive A. S., Humbe A. V., Undre P. G.. Advances in Magnetic Materials: Exploring the Properties and Applications of Spinel Ferrites. Materials Science for Future Applications: Emerging Development and Future Perspectives. 2025:309–333. doi: 10.1201/9781003491439-23. [DOI] [Google Scholar]
  4. Yakout S. M.. Spintronics: Future Technology for New Data Storage and Communication Devices. J. Supercond. Nov. Magn. 2020;33(9):2557–2580. doi: 10.1007/s10948-020-05545-8. [DOI] [Google Scholar]
  5. Nguyen M. D., Tran H.-V., Xu S., Lee T. R.. Fe3O4 Nanoparticles: Structures, Synthesis, Magnetic Properties, Surface Functionalization, and Emerging Applications. Applied Sciences. 2021;11(23):11301. doi: 10.3390/app112311301. [DOI] [PMC free article] [PubMed] [Google Scholar]
  6. Lei Z., Sathish C. I., Geng X., Guan X., Liu Y., Wang L., Qiao L., Vinu A., Yi J.. Manipulation of Ferromagnetism in Intrinsic Two-Dimensional Magnetic and Nonmagnetic Materials. Matter. 2022;5(12):4212–4273. doi: 10.1016/j.matt.2022.11.017. [DOI] [Google Scholar]
  7. El Kanj, A. Unraveling Spin Wave Dynamics in Ferro- and Antiferro- Magnetic Materials: A Step towards Ultrafast Magnonics. Thesis, Université Paris-Saclay, 2024. [Google Scholar]
  8. S G., Diebold U., Tang J., Malkinski L.. Tailoring the Interface Properties of Magnetite for Spintronics. Advanced Magnetic Materials. 2012:39101. doi: 10.5772/39101. [DOI] [Google Scholar]
  9. Moreira I. de P. R., Illas F.. A Unified View of the Theoretical Description of Magnetic Coupling in Molecular Chemistry and Solid State Physics. Phys. Chem. Chem. Phys. 2006;8(14):1645–1659. doi: 10.1039/b515732c. [DOI] [PubMed] [Google Scholar]
  10. Kurtulus Y., Dronskowski R., Samolyuk G. D., Antropov V. P.. Electronic Structure and Magnetic Exchange Coupling in Ferromagnetic Full Heusler Alloys. Phys. Rev. B Condens. Matter Mater. Phys. 2005;71(1):1–12. doi: 10.1103/PhysRevB.71.014425. [DOI] [Google Scholar]
  11. Dai J., Tang J.. Direct Measurement of the Dependence of Granular Giant Magnetoresistance on the Relative Orientation of Magnetic Granules. Appl. Phys. Lett. 2000;76(26):3968–3970. doi: 10.1063/1.126837. [DOI] [Google Scholar]
  12. Regan A., O’Donoghue J., Poree C., Dunne P. W.. Introducing Materials Science: Experimenting with Magnetic Nanomaterials in the Undergraduate Chemistry Laboratory. J. Chem. Educ. 2023;100(6):2387–2393. doi: 10.1021/acs.jchemed.3c00121. [DOI] [PMC free article] [PubMed] [Google Scholar]
  13. Oliveira L. C.A., Rios R. V.R.A., Fabris J. D., Lago R. M., Sapag K.. Magnetic Particle Technology: A Simple Preparation of Magnetic Composites for the Adsorption of Water Contaminants. J. Chem. Educ. 2004;81(2):248–250. doi: 10.1021/ed081p248. [DOI] [Google Scholar]
  14. Urbina A. D., Sridhara H., Scholtz A., Armani A. M.. Synthesis and Characterization of Superparamagnetic Iron Oxide Nanoparticles: A Series of Laboratory Experiments. J. Chem. Educ. 2024;101(5):2039–2044. doi: 10.1021/acs.jchemed.3c00996. [DOI] [PMC free article] [PubMed] [Google Scholar]
  15. Khashan S., Dagher S., Tit N., Alazzam A., Obaidat I.. Novel Method for Synthesis of Fe3O4@TiO2 Core/Shell Nanoparticles. Surf. Coat. Technol. 2017;322:92–98. doi: 10.1016/j.surfcoat.2017.05.045. [DOI] [Google Scholar]
  16. Shahbahrami B., Rabiee S. M., Shidpoor R.. An Overview of Cobalt Ferrite Core-Shell Nanoparticles for Magnetic Hyperthermia Applications. Advanced Ceramic Progress. 2020;6(1):105923. doi: 10.30501/acp.2020.105923. [DOI] [Google Scholar]
  17. Petcharoen K., Sirivat A.. Synthesis and Characterization of Magnetite Nanoparticles via the Chemical Co-Precipitation Method. Materials Science and Engineering: B. 2012;177(5):421–427. doi: 10.1016/j.mseb.2012.01.003. [DOI] [Google Scholar]
  18. Shen L., Qiao Y., Guo Y., Meng S., Yang G., Wu M., Zhao J.. Facile Co-Precipitation Synthesis of Shape-Controlled Magnetite Nanoparticles. Ceram. Int. 2014;40(1):1519–1524. doi: 10.1016/j.ceramint.2013.07.037. [DOI] [Google Scholar]
  19. Aphesteguy J. C., Kurlyandskaya G. V., De Celis J. P., Safronov A. P., Schegoleva N. N.. Magnetite Nanoparticles Prepared by Co-Precipitation Method in Different Conditions. Mater. Chem. Phys. 2015;161:243–249. doi: 10.1016/j.matchemphys.2015.05.044. [DOI] [Google Scholar]
  20. Dheyab M. A., Aziz A. A., Jameel M. S., Noqta O. A., Khaniabadi P. M., Mehrdel B.. Simple Rapid Stabilization Method through Citric Acid Modification for Magnetite Nanoparticles. Sci. Rep. 2020;10(1):1–8. doi: 10.1038/s41598-020-67869-8. [DOI] [PMC free article] [PubMed] [Google Scholar]
  21. VanDorn D., Ravalli M. T., Small M. M., Hillery B., Andreescu S.. Adsorption of Arsenic by Iron Oxide Nanoparticles: A Versatile, Inquiry-Based Laboratory for a High School or College Science Course. J. Chem. Educ. 2011;88(8):1119–1122. doi: 10.1021/ed100010c. [DOI] [Google Scholar]
  22. Dalverny A. L., Leyral G., Rouessac F., Bernaud L., Filhol J. S.. Synthesizing and Playing with Magnetic Nanoparticles: A Comprehensive Approach to Amazing Magnetic Materials. J. Chem. Educ. 2018;95(1):121–125. doi: 10.1021/acs.jchemed.7b00277. [DOI] [Google Scholar]
  23. Atrei A., Lesiak-Orlowska B., Tóth J.. Magnetite Nanoparticles Functionalized with Citrate: A Surface Science Study by XPS and ToF-SIMS. Appl. Surf. Sci. 2022;602:154366. doi: 10.1016/j.apsusc.2022.154366. [DOI] [Google Scholar]
  24. Tajareh A. V., Ganjidoust H., Ayati B.. Synthesis of TiO2/Fe3O4 /MWCNT Magnetic and Reusable Nanocomposite with High Photocatalytic Performance in the Removal of Colored Combinations from Water. Journal of Water and Environmental Nanotechnology. 2019;4(3):198–212. doi: 10.22090/jwent.2019.03.003. [DOI] [Google Scholar]
  25. Farahmandjou M.. One-Step Synthesis of TiO2 Nanoparticles Using Simple Chemical Technique. Materials Engineering Research. 2019;1(1):15–19. doi: 10.25082/MER.2019.01.004. [DOI] [Google Scholar]
  26. Salamat S., Younesi H., Bahramifar N.. Synthesis of Magnetic Core-Shell Fe3O4@TiO2 Nanoparticles from Electric Arc Furnace Dust for Photocatalytic Degradation of Steel Mill Wastewater. RSC Adv. 2017;7(31):19391–19405. doi: 10.1039/C7RA01238A. [DOI] [Google Scholar]
  27. Rajaram P., Jeice A. R., Jayakumar K.. Review of Green Synthesized TiO2 Nanoparticles for Diverse Applications. Surfaces and Interfaces. 2023:102912. doi: 10.1016/j.surfin.2023.102912. [DOI] [Google Scholar]
  28. Kim Y. Il, Kim D., Lee C. S.. Synthesis and Characterization of CoFe2O4Magnetic Nanoparticles Prepared by Temperature-Controlled Coprecipitation Method. Physica B Condens. Matter. 2003;337(1–4):42–51. doi: 10.1016/S0921-4526(03)00322-3. [DOI] [Google Scholar]
  29. Houshiar M., Zebhi F., Razi Z. J., Alidoust A., Askari Z.. Synthesis of Cobalt Ferrite (CoFe2O4) Nanoparticles Using Combustion, Coprecipitation, and Precipitation Methods: A Comparison Study of Size, Structural, and Magnetic Properties. J. Magn. Magn. Mater. 2014;371:43–48. doi: 10.1016/j.jmmm.2014.06.059. [DOI] [Google Scholar]
  30. Do H. M., Le T. H. P., Tran D. T., Nguyen T. N. A., Skorvanek I., Kovac J., Svec P., Phan M. H.. Magnetic Interaction Effects in Fe3O4@CoFe2O4 Core/Shell Nanoparticles. Journal of Science: Advanced Materials and Devices. 2024;9(1):100658. doi: 10.1016/j.jsamd.2023.100658. [DOI] [Google Scholar]
  31. Anil Kumar P., Ray S., Chakraverty S., Sarma D. D.. Engineered Spin-Valve Type Magnetoresistance in Fe3O 4-CoFe2O4 Core-Shell Nanoparticles. Appl. Phys. Lett. 2013;103(10):102406. doi: 10.1063/1.4819956. [DOI] [Google Scholar]
  32. Phong L. T. H., Manh D. H., Thanh T. D., Bach T. N., Ky V. H., Skorvanek I., Kovac J., Svec P., Phan T. L., Phan M. H.. Contrasting Shell Thickness-Dependent Magnetic Behaviors of CoFe2O4@Fe3O4 and Fe3O4@CoFe2O4 Core/Shell Nanoparticles. J. Alloys Compd. 2024;1005:176138. doi: 10.1016/j.jallcom.2024.176138. [DOI] [Google Scholar]
  33. Sahadat Hossain M., Ahmed S.. Easy and Green Synthesis of TiO2 (Anatase and Rutile): Estimation of Crystallite Size Using Scherrer Equation, Williamson-Hall Plot, Monshi-Scherrer Model, Size-Strain Plot, Halder- Wagner Model. Results in Materials. 2023;20:100492. doi: 10.1016/j.rinma.2023.100492. [DOI] [Google Scholar]
  34. Rani S., Varma G. D.. Superparamagnetism and Metamagnetic Transition in Fe3O4 Nanoparticles Synthesized via Co-Precipitation Method at Different PH. Physica B Condens. Matter. 2015;472:66–77. doi: 10.1016/j.physb.2015.05.016. [DOI] [Google Scholar]
  35. Li Q., Kartikowati C. W., Horie S., Ogi T., Iwaki T., Okuyama K.. Correlation between Particle Size/Domain Structure and Magnetic Properties of Highly Crystalline Fe3O4 Nanoparticles. Sci. Rep. 2017;7(1):1–4. doi: 10.1038/s41598-017-09897-5. [DOI] [PMC free article] [PubMed] [Google Scholar]
  36. Bui T. Q., Ton S. N. C., Duong A. T., Tran H. T.. Size-Dependent Magnetic Responsiveness of Magnetite Nanoparticles Synthesised by Co-Precipitation and Solvothermal Methods. Journal of Science: Advanced Materials and Devices. 2018;3(1):107–112. doi: 10.1016/j.jsamd.2017.11.002. [DOI] [Google Scholar]
  37. Niu W., Fang Y. W., Zhang X., Weng Y., Chen Y., Zhang H., Gan Y., Yuan X., Zhang S., Sun J., Wang Y., Wei L., Xu Y., Wang X., Liu W., Pu Y.. Charge-Transfer-Induced Multivalent States with Resultant Emergent Magnetism in Transition-Metal Oxide Heterostructures. Adv. Electron. Mater. 2021;7(1):2000803. doi: 10.1002/aelm.202000803. [DOI] [Google Scholar]
  38. Curiale J., Sánchez R. D., Troiani H. E., Leyva A. G., Levy P.. Magnetic Interactions in Ferromagnetic Manganite Nanotubes of Different Diameters. Appl. Surf. Sci. 2007;254:368–370. doi: 10.1016/j.apsusc.2007.07.074. [DOI] [Google Scholar]
  39. Stefan M., Pana O., Leostean C., Bele C., Silipas D., Senila M., Gautron E.. Synthesis and Characterization of Fe3O4-TiO2core-Shell Nanoparticles. J. Appl. Phys. 2014;116(11):114312. doi: 10.1063/1.4896070. [DOI] [Google Scholar]
  40. Oanh K. T. V., Phong H. T. L., Van D. N., Trang T. T. M., Thu P. H., Truong X. N., Ca X. N., Linh C. D., Nam H. P., Manh H. D.. Magnetic, Biocompatible CoFe2O4/Fe3O4 Core/Shell Nanoparticles: Designing and Improved Hyperthermia Properties. J. Nanopart. Res. 2023;25(10):212. doi: 10.1007/s11051-023-05862-8. [DOI] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

ed5c01804_si_001.pdf (2.5MB, pdf)
ed5c01804_si_002.docx (21.9MB, docx)

Articles from Journal of Chemical Education are provided here courtesy of American Chemical Society

RESOURCES