Abstract
Background:
Today, caries prevention approaches in dentistry are no longer limited to mechanical treatments; they are increasingly focused on the development and evaluation of various remineralizing agents aimed at reversing early lesions. Our study aimed to evaluate the surface roughness of different remineralizing agents on teeth with initial caries.
Methods:
Nine groups of bovine enamel specimens with initial enamel caries (n = 81) were randomly assigned: APF (xylitol-containing fluoride gel), FV (CPP-ACP-containing fluoride gel), BF (fluoride varnish), CR (self-assembling peptide P11-4), TM (CPP-ACP paste), GG (herbal toothpaste), RJ (xylitol-containing gel), TP (toothpaste), and C (Control). The materials were used in a professional (APF, FV, BF, and CR) or daily (TM, GG, RJ, and TP) regimen. The pH cycle was applied to enamel samples for a period of 6 days. Surface roughness (Ra) values were measured after the initial caries formation (first measurement) and after the application of remineralization agents (second measurement). Scanning electron microscopy images were also taken in the last stage. Ra values were analyzed statistically both inter- and intra-groups.
Results:
In the TM and TP groups, the decrease in Ra value was statistically significant (P < 0.05). The daily regimen group had a lower Ra value in the second measurement than in the first (P < 0.001). Furthermore, the daily regimen group had a lower Ra value than the professional regimen group in the second measurement (P < 0.001).
Conclusions:
Daily remineralization agents were found to be more effective in reducing enamel surface roughness. TM and TP were found to be the most effective.
Keywords: Dental caries, fluorides, roughness, scanning electron microscopy
Introduction
Dental caries, one of the most common public health problems, is caused by the interactions of acid-producing bacteria with a variety of host factors, including teeth and saliva, as well as a metabolizable substrate. The mechanism of caries formation is a dynamic process involving both demineralization and remineralization. The acid produced by the caries-causing bacteria in plaque causes the dissolution of minerals from the tooth surface and produces a porous surface layer.[1] A rough enamel surface is susceptible to bacterial and plaque involvement.[2] As a result, the uptake of bacteria and plaque increases caries formation, potentially triggering a vicious cycle. Remineralization is the process of restoring dissolved minerals from demineralized areas to the tooth surface.[3]
The objective of modern dentistry is to treat noncavitated caries lesions in a non-invasive manner so as to preserve the integrity of the healthy tooth structure. The use of various caries prevention agents, as well as regulating nutritional habits, improving oral hygiene, and developing regular tooth brushing habits, are all beneficial in the prevention of initial enamel caries.[4] The effectiveness of remineralization agents can be demonstrated through single-use by a dentist in a dental clinic for professional applications, as well as by daily use by individuals for personal use.
Plaque formation and bacterial involvement are influenced by enamel surface roughness, which increases caries susceptibility and periodontal problems.[2] The occurrence of such issues can be decreased by reducing the surface roughness of the tooth. The effect of remineralization agents on the mineralization of initial enamel caries is important for oral health, but the effect on surface roughness is also important. For this objective, surface profilometry and scanning electron microscopy (SEM) were used to assess the effects of different remineralization agents on the surface properties of bovine teeth with initial caries. The research null hypotheses were as follows:
There would be no difference in the material groups’ Ra values among the measurement times
There would be no difference in Ra values among the groups after remineralization agents were applied
There would be no difference in Ra values among the daily and professional regimens.
Methods
Power analysis
A power analysis was performed using G*Power software version 3.1.9.7 (Heinrich-Heine-Universität Düsseldorf, Düsseldorf, Germany). Based on a one-way ANOVA study design with nine groups, an effect size of 0.46, an alpha error probability of 0.05, and a power of 0.80, the required total sample size was calculated as 81 (9 samples per group).
Selection of teeth
This study was started after receiving approval from the ethics committee of the faculty of veterinary medicine (Decision Number: 2018/72 - Decision Date: October 24, 2018). Caries-free bovine lower incisors with no defects in the crown regions were obtained from erzurum oral meat integrated facilities for this study. Bovine teeth were selected for this study because they are widely accepted as a suitable substitute for human teeth in dental hard tissue research. They provide a larger, more uniform surface area for standardization and share similar histomorphological, physical, and chemical properties with human enamel.[5] Without damaging the crown surfaces, the soft tissue attachments on the extracted teeth were removed and cleaned with a pasteless polishing brush. The teeth were kept in a 0.1% thymol solution before the experiment and used within 4 months.
Teeth preparation and specimen preparation
Eighty-one enamel samples (5 mm × 5 mm × 3 mm) with no surface cracks were prepared from bovine teeth using a low-speed cutting device (Isomet® Low-Speed Saw, Buehler®, Illinois, USA) [Figure 1a]. Using an adhesive wax (Hoffman’s Gusswachs, Berlin, Germany), the specimens were adhered to the spoon of a universal polypropylene tube, covering all edges of the tooth but exposing the enamel surface. With 9 samples in each group, samples were randomly assigned to 8 study and 1 control group [Table 1]. Each sample was placed in a sterile tube containing 2% thymol in a 15 ml volume. The materials were divided into two groups based on the manufacturers’ recommended application methods: the daily regimen group included materials that are used in daily regimens for personal use, while the professional regimen group included single-use application materials used by dental professionals [Figure 2].
Figure 1.

Experimental armamentarium used in the study: (a) Isomet® low-speed saw for bovine enamel sample preparation, (b) Incubator for storage in the solution at 37°C, (c) FluoreCam system for subsurface lesion detection via QLF, and (d) KLA-Tencor P-7 stylus profiler for surface roughness measurements
Table 1.
Material groups used in the study
| Group | Material | Ingredients | Manufacturer |
|---|---|---|---|
| Professional regimen group | |||
| APF | Ionite APF gel | % 1.23 APF (12,300 ppm), xylitol, Vitamin E | Dharma, Miami, USA |
| FV | MI varnish™ fluoride varnish | CPP-ACP, %5 NaF (22,600 ppm) | GC, Tokyo, Japan |
| BF | Bifluorid 12® fluoride varnish | % 6 NaF (27,140 ppm), % 6 CaF | Voco, Cuxhaven, Germany |
| CR | Curodont™ Repair | P11-4 peptide | Curodont™, Zurich, Switzerland |
| Daily regimen group | |||
| TM | Tooth mousse® | CPP-ACP | GC, Tokyo, Japan |
| GG | GumGumix® toothpaste | Dicalcium phosphate, ginger extract, honey | Beka Medicine, Istanbul, Turkey |
| RJ | R.O.C.S® medical minerals gel | Mg, calcium phosphate, xylitol (%10) | DRC Group, Moscow, Russia |
| TP | Colgate total 12 | %0.32 NaF (1450 ppm) | Colgate-Palmolive, Istanbul, Turkey |
| C | Distilled water (control) | Distilled water |
Figure 2.
Flowchart of the study
Formation of initial enamel lesions
As suggested by Amaechi et al.,[6] the demineralization solution to be used to create initial enamel caries on the enamel surfaces of the teeth was prepared. 0.1 M NaOH, 0.1 M lactic acid, and 6% by weight percent hydroxyethyl cellulose (Sigma Aldrich, MO, USA) make up the demineralization solution. The solution’s pH was adjusted to 4.5. 8 ml solution was filled in universal tubes + spoon to cover each sample. The samples were kept at 37°C for 7 days after being immersed in the solution [Figure 1b]. The samples with initial enamel caries removed from the solution were washed and transferred to new sterilin tubes containing distilled water after the demineralization process was completed. The formation of subsurface lesions in the samples was determined by the Quantitative Light-Induced Fluorescence (FluoreCam, Daraza Therametric Technologies, USA) method [Figure 1c].
First measurement
The roughness of enamel surfaces was measured using a surface profiler (KLA-Tencor P-7 Stylus Profiler, Milpitas, CA, USA) after the demineralization process was completed [Figure 1d]. With the help of a suitable mold, the enamel surfaces on the spoons of the sterilin tubes were placed parallel to the ground during the measurements. Surface analysis was performed to obtain Ra (mean arithmetic roughness) data from three different areas of each specimen’s surface (bottom, middle, and top third). The samples were kept at room temperature in distilled water during this procedure.
pH cycle and application of experimental materials
The pH cycle was used on the samples with initial enamel caries. In this cycle, two different demineralization and remineralization solutions were prepared, similar to the work of Vieira et al.[7] For the demineralization solution, a solution of 2 mmol/L Ca, 2 mmol/L P, 0.075 mol/L acetate buffer, and a pH of 4.7 was used (Sigma Aldrich, MO, USA). The remineralization solution used was a pH 7.0 solution with 1.5 mmol/L Ca, 0.9 mmol/L P, 0.15 mmol/L KCl, and 0.02 mol/L cacodilate buffer (Sigma Aldrich, MO, USA). During the 6-day pH cycle, the samples were kept in demineralization and remineralization solutions at 37°C [Figure 1b]. The demineralization solution was changed every day at midnight, and the remineralization agents were changed twice a day at 8:00 and 16:00 [Figure 2]. Every day, remineralization agents in the form of slurry were also replaced. The teeth were washed with distilled water before each stage of the cycle.
In the present study, materials from the TM, GG, RJ, and TP groups were mixed with distilled water at a ratio of 1/3 by weight (w/w) in the BioVortex V1 (Boeco, Hamburg, Germany) device to form a slurry. The prepared samples were immersed in these slurries and stored according to the manufacturer’s recommendations for each material’s storage time [Table 2]. A single application was made at the start of the cycle for the APF, FV, BF, and CR groups used in professional applications. After the pH cycle process, residues of the experimental materials were removed, and samples were irrigated with distilled water.
Table 2.
Material application regimen for each group
| Group | Application regimen |
|---|---|
| APF | Applied once to the tooth surface with a varnish brush on the first day of the cycle and left for 4 min on the surface |
| FV | Applied once to the tooth surface with a varnish brush on the first day of the cycle and left for 4 min on the surface |
| BF | Applied to the tooth surface once using a pellet on the first day of the cycle and left for 20 s on the surface |
| CR | Applied to the tooth surface once using a pellet on the first day of the cycle. The powder in the vial was mixed with 0.05 mL of distilled water prior to the application, and then left for 5 min on the surface |
| TM | Throughout the cycle, applied twice a day every day. For 3 min, the samples were immersed in the slurry at a 1/3 w/w ratio |
| GG | Throughout the cycle, applied twice a day every day. The samples were kept in the slurry for 2 min at a 1/3 w/w ratio |
| RJ | Throughout the cycle, applied twice a day every day. The samples were kept in the slurry for 7 min at a 1/3 w/w ratio |
| TP | Throughout the cycle, applied twice a day every day. The samples were kept in the slurry for 2 min at a 1/3 w/w ratio |
| C | Specimens were washed with distilled water before each stage of the pH cycle without the application of any material |
Second measurement
Ra measurements of the samples, kept in distilled water, were carried out in the same way as the first measurement. The examiner was blinded to the study groups.
Scanning electron microscopy evaluation
Three samples from each group were chosen at random following the second measurement for SEM evaluation. The morphological variations in the enamel surface in different material groups were evaluated and compared using SEM (Zeiss sigma 300, Carl Zeiss Ltd., Cambridge, UK). Images were taken at a magnification of ×4000.
Statistical analysis
The SPSS 25.0 package program (SPSS Inc., Chicago, IL, USA) was used to analyze the data. Kolmogorov–Smirnov test indicated that the distribution of the Ra values did not follow a normal distribution. Values are given as median, minimum, and maximum. In order to compare the differences between materials, the Kruskal–Wallis test was used. For post hoc analysis, the pairwise comparisons using the Bonferroni correction were made. The dependent groups were subjected to the Wilcoxon signed-rank test to determine if there were any differences in the different measurement stages. P < 0.05 was considered statistically significant in all analyses.
Results
Table 3 shows the Ra values obtained in both stages for each group.
Table 3.
Ra values of each study group in two measurement stages (median [minimum–maximum])
| Group | First measurement (postinitial lesion) | Second measurement (postre mineralisation) | P 1 |
|---|---|---|---|
| Professional regimen | |||
| APF | 10.7 (1.6–35.4) | 14.2a (3.2–43.3) | 0.581 |
| FV | 13.2 (3.7–39.2) | 12.2a (5.3–31.1) | 0.178 |
| BF | 14 (1.7–34.6) | 9.5a (1.3–34.3) | 0.414 |
| CR | 11.9 (1.6–31.5) | 11.8a (1.6–42.1) | 0.631 |
| Daily regimen | |||
| TM | 12.3 (2.8–38.3) | 8.5b (4.8–30.8) | 0.015* |
| GG | 11.9 (3–38.5) | 11.8a (3.3–30.1) | 0.22 |
| RJ | 13.5 (4.6–42.2) | 10.8a (4.2–29.6) | 0.072 |
| TP | 14.7 (2.6–51.7) | 8.8b (1.9–56) | 0.027* |
| C | 12.8 (4.2–51.4) | 18.9a (4.9–40) | 0.149 |
| P2 | 1 | 0.018* |
*Statistically significant at P<0.05; 1Wilcoxon signed rank test; 2Kruskal–Wallis test. Different letters indicate statistically significant differences between groups (post hoc pairwise comparison)
In the first measurement, after the initial caries had formed, a homogeneous distribution of Ra values between the material groups was observed (P > 0.05).
In the second measurement after remineralization agents were applied, the TM and TP groups showed significantly lower Ra values than group C (P < 0.05). When compared to the first measurement, the APF and C groups showed a statistically insignificant increase, while the others showed a decrease. Only the decreases in the TM and TP groups were statistically significant (P < 0.05) among the groups that showed a decrease.
Only in the second measurement did the application method groups differ, with the daily regimen group having a significantly lower Ra value than the others [P < 0.001, Table 4]. Also, in the daily regimen group, the Ra value obtained in the second measurement was significantly lower than the first measurement (P < 0.001). The professional regimen and control groups did not differ significantly between the first and second measurements (P > 0.05).
Table 4.
Ra values of each application regimen in two measurement stages (median [minimum–maximum])
| First measurement (postinitial lesion) | Second measurement (postre mineralisation) | P 1 | |
|---|---|---|---|
| Professional regimen | 12.8 (1.6–39.2) | 11.8a (1.3–43.3) | 0.550 |
| Daily regimen | 13 (2.6–51.7) | 10b (1.9–56) | <0.001* |
| Control | 12.8 (4.2–51.4) | 18.9a (4.9–40) | 0.149 |
| P 2 | 0.962 | <0.001* | - |
*Statistically significant at P<0.05; 1Wilcoxon signed-rank test; 2Kruskal–Wallis test. Different letters indicate statistically significant differences between groups (post hoc pairwise comparison)
As a result of demineralization in group C, irregularities and a distinct porous structure were seen in the prism core and interprismatic area when SEM images of the enamel surface were examined [Figure 3]. When the SEM images of the experimental groups were compared to the C group:
Figure 3.
Scanning electron microscopy images of enamel surfaces following experimental process (×4000, the letters in the figures represent groups)
The interprismatic area was more regular in the APF group, while demineralization areas and nonuniform porous structure were more visible in the prism core
Porous areas on the surface were less prominent in the FV group. The material could cover or remineralize these areas. In addition, there was varnish residue on the surface
The demineralized areas in the prism core of the BF group were similar, but there were porous areas covered with material in different places
The borders of the prism core were obscured in the CR group, but no porous structure was visible. Material covered the enamel’s surface
The TM group had less demineralization in the prism core and a porous appearance on the surface
The surface of the GG group had a non-uniform and less prominent porous appearance
The RJ group did not show any signs of demineralization in the prism core and interprismatic enamel
The TP group had fewer irregularities in the prism core and interprismatic area caused by demineralization.
Discussion
Current approaches in dental procedures are focusing on preserving teeth without caries formation, reducing demineralization, and remineralizing them at the initial stages of caries.[4] Many materials have been developed in recent years to achieve this objective, and many effectiveness studies have been and are currently being conducted on these materials. While studies on the effects of traditional remineralization agents on the enamel surface exist, research on more recent materials is limited. Plaque accumulation increases as the surface roughness amount increases, and as a result, the risk of caries formation and periodontal inflammation increases.[2] Therefore, as a strategy for reducing adhesion of cariogenic bacteria, evaluating the reduction in enamel surface roughness after application of newly developed remineralization agents is critical.
In the present research, the surface roughness and SEM images of the teeth were compared after the remineralizing agents were applied. Based on the results of this study, the first null hypothesis was rejected since Ra values of TM and TP decreased between the measurement times. The second null hypothesis was rejected since Ra values of TM and TP differed from the C group after remineralization agents were applied. The third null hypothesis was also rejected since the products used on a daily basis reduced surface roughness more effectively than single-application dental professional products.
According to the available evidence from clinical and laboratory studies, the caries-preventive mode of action for fluoride is primarily topical. Fluoride ions are incorporated into the apatite structure during remineralization, resulting in fluor-hydroxyapatite mixed crystals that are more resistant to acid attack.[8] Zhou et al.[9] claimed that while NaF does not have the ability to repair the enamel structure, it can improve the nanomechanical properties of the enamel surface, such as increasing the nano hardness and elastic modulus and reducing the roughness. After a single application for 10 min, 1.23% APF gel has been reported to reduce the roughness of the erosive tooth surface and also to decrease the surface roughness significantly greater than the artificial saliva and CPP-ACP applications.[10] The Ra value decreased in the fluoride-containing FV, BF, and TP groups, but increased in the APF group, according to the findings of the present study. Only the TP group’s decrease was statistically significant. In contrast to the other groups, the application in the daily regimen is thought to be effective in achieving a significant decrease in the TP group. The acidic structure of APF is thought to be the cause of the surface roughness increase in the APF group.[11]
CPP-ACP facilitates the precipitation of calcium and phosphate on the enamel surface by providing a calcium and phosphate reservoir, effectively increasing remineralization.[12] Zhou et al.[9] reported that when enamel surfaces were treated with CPP-ACP and 500 ppm NaF, the surface roughness of the enamel surfaces decreased significantly, with no significant difference between the two treatments. It was claimed that forming hydroxyapatite crystals and repairing the enamel prisms and interprismatic area with CPP-ACP significantly improved the nanomechanical properties of the enamel, and that the enamel surface became smoother with longer remineralization times.[9] Also, CCP-ACP was found to be more effective than fluoride-containing varnish and paste at reducing surface roughness.[13] The TM group containing CCP-ACP had the lowest Ra value among the study groups in the second measurement, according to the present study’s findings. Unlike the other CPP-ACP containing FV group, the TM group showed a significant decrease in Ra value following the remineralization process, and it was statistically significant that it had a lower Ra value than the C group. Daily used CCP-ACP was found to reduce surface roughness effectively in this study.
The self-assembled peptide P11-4, which mimics enamel matrix proteins, is used in the remineralization of subsurface lesions. It spreads in the monomeric form to the sub-surface lesion, where it forms a three-dimensional matrix. It has been reported that enamel crystals form around this matrix due to its high affinity for calcium ions in saliva. With its demineralization-reducing and remineralization-enhancing effect under the pH cycle, it has been reported that P11-4, when applied once, increases net mineral gain in initial caries lesions and provides effective results in the treatment of lesions.[14,15] According to Metwally et al.,[16] the effects of fluoride and P11-4 on enamel roughness were similar. In the present study, the CR group did not differ significantly in terms of measurement and material groups.
Anticariogenic xylitol is a non-acidogenic sweetener that can be used as a sugar substitute. In terms of reducing enamel demineralization and increasing remineralization, xylitol is said to be effective at combining with calcium in an aqueous solution, preventing calcium and/or phosphate ions from dissolving from the enamel, and acting as a calcium carrier.[17] It has also been suggested that xylitol works better when combined with fluoride.[18] When evaluating the effects of CPP-ACP/NaF, xylitol/NaF, and NaF varnishes on dental erosion, all three varnishes provided lower surface roughness values than the negative control group after 3 or 6 days of erosive administration, and there was no significant difference between them.[19] According to Gargouri et al.,[20] using xylitol gum enriched with propolis resulted in a slight reduction in surface roughness. In this study, Ra values of the RJ group did not differ significantly between the first and second measurements, and between the C group in the second measurements either.
Plant-based materials have also been studied in the treatment of initial enamel lesions. According to Gocmen et al.,[21] herbal sources such as honey, ginger, and rosemary have inhibitory and remineralization-enhancing effects on tooth demineralization, with significantly more remineralization observed in the treatment regimen that combined honey and ginger. The ginger-honey mixture has been shown to be less effective in treating initial enamel lesions than materials containing CCP-ACP and fluoride-hydroxyapatite-xylitol; however, it is effective in preventing demineralization and remineralization.[22] It has been reported that the fluoride content of ginger (2.8 mg/kg) was responsible for the remineralization effect of the ginger-honey mixture.[21] In the literature review, no research was found about the effect of the ginger-honey mixture on the enamel surface roughness. In this study, the GG group did not differ significantly between the first and second measurements, and between the C group in the second measurements either.
In the present research, the daily regimen group had significantly reduced Ra values, whereas the professional regimen group did not. This disparity could be explained by the fact that professional products were applied all at once, whereas daily agents were applied twice daily, as recommended by the manufacturer. It can be thought that standardization can be achieved in the comparison of these materials by using them at equal time intervals and frequencies. However, in this study, materials were applied in accordance with the manufacturers’ recommendations for comparing the effects of these materials in routine use.
Although no significant difference was observed between the P11-4 and CPP-ACPF (CPP-ACP fluoride) groups in an SEM study, it was stated that P11-4 remineralized enamel lesions more effectively.[23] According to the present study, the acidic structure of the APF is considered to be responsible for the clearer visualization of demineralization areas in the prism core in the images of the APF group. Surface irregularities were found to be lower in all groups when compared to the control group. Also, material remnants were found in SEM images of FV, BF, and CR groups.
The use of bovine teeth instead of human teeth may be a limitation of our study. The difficulty of finding extracted, caries-free human teeth and their similarity to human teeth in various in vitro studies led to the selection of bovine teeth in our study. Nevertheless, future research should incorporate human teeth, particularly those extracted for orthodontic purposes, to further validate these results and strengthen their clinical applicability.
Conclusions
Enamel roughness, which occurs with the onset of dental caries, is a critical factor for bacterial adhesion. Remineralizing agents play an important role in reducing enamel roughness. Our study revealed that among the remineralizing agents, pastes containing CPP-ACP and 0.32% NaF were more effective in reducing enamel surface roughness. Furthermore, it is noteworthy that agents designed for daily use were more effective in surface smoothing compared to those designed for professional application.
Conflicts of interest
There are no conflicts of interest.
Acknowledgment
We would like to thank Erzurum Oral Meat Integrated Facilities for their contribution to our study.
Funding Statement
Nil.
References
- 1.Silverstone LM. Structure of carious enamel, including the early lesion. Oral Sci Rev. 1973;3:100–60. [PubMed] [Google Scholar]
- 2.Bollen CM, Lambrechts P, Quirynen M. Comparison of surface roughness of oral hard materials to the threshold surface roughness for bacterial plaque retention: A review of the literature. Dent Mater. 1997;13:258–69. doi: 10.1016/s0109-5641(97)80038-3. [DOI] [PubMed] [Google Scholar]
- 3.Featherstone JD. The caries balance: The basis for caries management by risk assessment. Oral Health Prev Dent. 2004;2(Suppl 1):259–64. [PubMed] [Google Scholar]
- 4.Hurlbutt M, Young DA. A best practices approach to caries management. J Evid Based Dent Pract. 2014;14(Suppl):77–86. doi: 10.1016/j.jebdp.2014.03.006. [DOI] [PubMed] [Google Scholar]
- 5.Yassen GH, Platt JA, Hara AT. Bovine teeth as substitute for human teeth in dental research: A review of literature. J Oral Sci. 2011;53:273–82. doi: 10.2334/josnusd.53.273. [DOI] [PubMed] [Google Scholar]
- 6.Amaechi BT, Higham SM, Edgar WM. Factors affecting the development of carious lesions in bovine teeth in vitro. Arch Oral Biol. 1998;43:619–28. doi: 10.1016/s0003-9969(98)00043-0. [DOI] [PubMed] [Google Scholar]
- 7.Vieira AE, Danelon M, Camara DM, Rosselli ER, Stock SR, Cannon ML, et al. In vitro effect of amorphous calcium phosphate paste applied for extended periods of time on enamel remineralization. J Appl Oral Sci. 2017;25:596–603. doi: 10.1590/1678-7757-2016-0513. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 8.Rošin-Grget K, Peroš K, Sutej I, Bašić K. The cariostatic mechanisms of fluoride. Acta Med Acad. 2013;42:179–88. doi: 10.5644/ama2006-124.85. [DOI] [PubMed] [Google Scholar]
- 9.Zhou C, Zhang D, Bai Y, Li S. Casein phosphopeptide-amorphous calcium phosphate remineralization of primary teeth early enamel lesions. J Dent. 2014;42:21–9. doi: 10.1016/j.jdent.2013.11.005. [DOI] [PubMed] [Google Scholar]
- 10.Maden EA, Acar Ö, Altun C, Polat GG. The effect of casein phosphopeptide-amorf calcium phosphate and acidulated phosphate fluoride gel on dental erosion in primary teeth: An in vitro study. J Clin Pediatr Dent. 2017;41:275–9. doi: 10.17796/1053-4628-41.4.275. [DOI] [PubMed] [Google Scholar]
- 11.Nelson DG, Jongebloed WL, Arends J. Morphology of enamel surfaces treated with topical fluoride agents: SEM considerations. J Dent Res. 1983;62:1201–8. doi: 10.1177/00220345830620120501. [DOI] [PubMed] [Google Scholar]
- 12.Ma X, Lin X, Zhong T, Xie F. Evaluation of the efficacy of casein phosphopeptide-amorphous calcium phosphate on remineralization of white spot lesions in vitro and clinical research: A systematic review and meta-analysis. BMC Oral Health. 2019;19:295. doi: 10.1186/s12903-019-0977-0. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 13.Memarpour M, Soltanimehr E, Sattarahmady N. Efficacy of calcium- and fluoride-containing materials for the remineralization of primary teeth with early enamel lesion. Microsc Res Tech. 2015;78:801–6. doi: 10.1002/jemt.22543. [DOI] [PubMed] [Google Scholar]
- 14.Brunton PA, Davies RP, Burke JL, Smith A, Aggeli A, Brookes SJ, et al. Treatment of early caries lesions using biomimetic self-assembling peptides – A clinical safety trial. Br Dent J. 2013;215:E6. doi: 10.1038/sj.bdj.2013.741. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 15.Kirkham J, Firth A, Vernals D, Boden N, Robinson C, Shore RC, et al. Self-assembling peptide scaffolds promote enamel remineralization. J Dent Res. 2007;86:426–30. doi: 10.1177/154405910708600507. [DOI] [PubMed] [Google Scholar]
- 16.Metwally N, Niazy M, El-Malt M. Remineralization of Early carious lesions using biomimetic selfassembling peptides versus fluoride agent.(In vitro and in vivo study) Al-Azhar D J. 2017;4:179–88. [Google Scholar]
- 17.Arends J, Christoffersen J, Schuthof J, Smits MT. Influence of xylitol on demineralization of enamel. Caries Res. 1984;18:296–301. doi: 10.1159/000260780. [DOI] [PubMed] [Google Scholar]
- 18.Amaechi BT, Higham SM, Edgar WM. Caries inhibiting and remineralizing effect of xylitol in vitro. J Oral Sci. 1999;41:71–6. doi: 10.2334/josnusd.41.71. [DOI] [PubMed] [Google Scholar]
- 19.Alexandria A, Valença AM, Cabral LM, Maia LC. Comparative effects of CPP-ACP and Xylitol F-Varnishes on the reduction of tooth erosion and its progression. Braz Dent J. 2020;31:664–72. doi: 10.1590/0103-6440202002985. [DOI] [PubMed] [Google Scholar]
- 20.Gargouri W, Kammoun R, Elleuche M, Tlili M, Kechaou N, Ghoul-Mazgar S. Effect of xylitol chewing gum enriched with propolis on dentin remineralization in vitro. Arch Oral Biol. 2020;112:104684. doi: 10.1016/j.archoralbio.2020.104684. [DOI] [PubMed] [Google Scholar]
- 21.Gocmen GB, Yanikoglu F, Tagtekin D, Stookey GK, Schemehorn BR, Hayran O. Effectiveness of some herbals on initial enamel caries lesion. Asian Pac J Trop Biomed. 2016;6:846–50. [Google Scholar]
- 22.Korkut B, Korkut D, Yanikoglu F, Tagtekin D. Clinical assesment of demineralization and remineralization surrounding orthodontic brackets with fluorecam. Asian Pac J Trop Biomed. 2017;7:373–7. [Google Scholar]
- 23.Soares R, De Ataide IN, Fernandes M, Lambor R. Assessment of enamel remineralisation after treatment with four different remineralising agents: A scanning electron microscopy (SEM) study. J Clin Diagn Res. 2017;11:C136–41. doi: 10.7860/JCDR/2017/23594.9758. [DOI] [PMC free article] [PubMed] [Google Scholar]


