Skip to main content
ACS Omega logoLink to ACS Omega
. 2026 Jul 13;11(29):43215–43224. doi: 10.1021/acsomega.6c00461

Newly Identified Early Cretaceous High-Mg Diorites in the Southern Dayaoshan Area of South China: Petrogenesis and Geodynamic Implications

Yumei Wei †,‡, Lanqiu Meng †,‡, Yu Zhang †,‡,*
PMCID: PMC13425323  PMID: 42540178

Abstract

The geodynamic mechanism responsible for Late Mesozoic magmatism in South China remains highly debated, particularly with regard to the relative contributions of the Paleo-Pacific and Neo-Tethyan subduction systems. This study documents newly identified high-Mg diorites (∼102 Ma) from the southern Dayaoshan area. These rocks exhibit high Mg# (up to 64), elevated Cr and Ni concentrations, and decoupled zircon Hf (εHf­(t) = −9.95 to −5.66) and whole-rock Nd (εNd­(t) = −8.74 to −8.71) isotopic signatures. Such geochemical and isotopic features are inconsistent with simple crustal melting or fluid-metasomatized mantle-wedge melting. Instead, Hf–Nd isotopic and trace-element modeling indicates that their petrogenesis involved the partial melting of a subduction-related mélange source, defined as a physical mixture of metasediments and depleted mantle peridotite. The E–W-trending spatial distribution of the magmatic belt (including the Cancun pluton) stands in sharp contrast to the regional NE-striking Paleo-Pacific magmatic belt. This geometric decoupling implies that the Southern Dayaoshan area was governed by far-field tectonic processes tied to Neo-Tethyan ridge subduction or slab window formation during the Early-to-Late Cretaceous transition. These results provide new constraints on the operation of a multislab geodynamic system during the Mesozoic evolution of South China.


graphic file with name ao6c00461_0010.jpg


graphic file with name ao6c00461_0008.jpg

1. Introduction

High-Mg diorites, the intrusive equivalents of high-Mg andesites, represent a volumetrically minor but geochemically distinctive group of intermediate igneous rocks. They are typically characterized by elevated MgO contents (>5 wt %), high Mg-numbers (>45), relatively low CaO concentrations (<10 wt %), and low TFeO/MgO ratios (<1.5). In addition, they exhibit significant enrichment in large-ion lithophile elements (LILEs; e.g., Ba and Sr) as well as compatible elements (e.g., Cr and Ni) relative to typical arc andesites. , Because they record interactions between slab-derived components and mantle peridotite, high-Mg diorites are widely regarded as sensitive tracers of deep lithospheric processes in subduction settings. − Although commonly associated with active subduction zones, their occurrence in intraplate or postcollisional settings presents important challenges to conventional petrogenetic models. ,

The Late Mesozoic magmatism in South China has long been interpreted as a consequence of the westward subduction of the Paleo-Pacific plate, which generated extensive NE-trending magmatic belts across eastern South China. , However, the tectonic origin of contemporaneous magmatism in the southern South China Block (SCB) remains controversial. In particular, a series of E–W–trending magmatic rocks dated at ∼110–80 Ma occur along the southern margin of the SCB, showing spatial patterns that differ markedly from the NE-trending Paleo-Pacific magmatic belts. − These features raise an important question: whether the Late Mesozoic magmatism in southern South China was controlled primarily by the Paleo-Pacific subduction system or influenced by the Neo-Tethyan tectonic domain. Recent studies have suggested that the northward subduction of the Neo-Tethyan plate may have exerted far-field tectonic effects on the southern SCB, potentially generating an E–W-trending magmatic response independent from the Paleo-Pacific arc system. ,,, Clarifying the tectonic affinity of these magmatic rocks is therefore crucial for understanding the geodynamic evolution of South China during the Cretaceous.

The Dayaoshan region, a key segment of the southwestern Qin-Hang Metallogenic belt, forms part of the large-scale fold system in central to northeastern Guangxi within the South China Fold Belt. Its complex geological evolution preserves a full record of multistage tectonic deformation of the SCB.

This study investigates the newly identified Early Cretaceous Cancun pluton in the southern Dayaoshan area using zircon U–Pb geochronology, whole-rock geochemistry, and Sr–Nd–Hf isotopes. The objectives are to (1) constrain the magma source and petrogenesis of the high-Mg diorites, and (2) evaluate whether this magmatic event is genetically related to the Paleo-Pacific subduction system or reflects tectonic influence from the Neo-Tethyan domain. Resolving this issue provides new constraints on the tectonic framework of southern South China and the operation of a multislab geodynamic system during the Cretaceous.

2. Geological Background and Sample Descriptions

The Dayaoshan region is situated along the southern margin of the SCB and extends across central to eastern Guangxi Zhuang Autonomous Region. As an important segment of the Nanling metallogenic belt, it preserves a well-documented record of multistage tectonic evolution, making it a key natural laboratory for investigating intraplate tectono-magmatic processes within the SCB. The region exhibits a diverse stratigraphic succession. Cambrian sedimentary rocks, mainly represented by the Xiaoneichong and Huangdongkou formations, consist predominantly of terrigenous clastic sequences composed of quartz sandstone and feldspathic sandstone interbedded with siltstone. These strata are unconformably overlain by Devonian clastic–carbonate successions, which reflect post-Caledonian sedimentary responses. Quaternary deposits are largely restricted to modern river valleys and piedmont zones and comprise fluvial and alluvial–proluvial sediments.

Magmatism in the Dayaoshan region occurred primarily during the Caledonian and Yanshanian periods (Figure  ). Igneous bodies are generally small in scale and occur mainly as stocks and dikes, with large batholiths notably absent. During the Caledonian orogeny, a suite of plutonic rocks developed along the southeastern margin of the Dayaoshan uplift, including gabbrodiorite, quartz diorite, tonalite, trondhjemite (plagiogranite), and granodiorite. This assemblage displays typical tonalite–trondhjemite–granodiorite (TTG) characteristics. Whole-rock geochemical data suggest an island-arc affinity, consistent with a tectonic setting related to subduction of the Paleo-Tethys Ocean. Yanshanian magmatism can be subdivided into early (Jurassic) and late (Cretaceous) stages. The early stage is dominated by I-type granites, including the Yuanzhuding, Siwei, Dafoding, Fenghuang, Fuqing, Dabang, and Shangdong plutons. , These granites spatially associate with the early Paleozoic TTG suite. The late stage is characterized by I-type granodiorites and granites, such as the Dali and Pingtianshan plutons, which typically occur as small stocks and dikes.

1.

1

(a) Geotectonic setting of the Dayaoshan area. (b) Spatiotemporal distribution of granitoids in the Dayaoshan area, Guangxi Province (modified after Pang et al.). The distribution of Early Paleozoic arc-related magmatism (interpreted as Paleo-Tethyan subduction products) is also indicated to highlight the pre-existing subduction-modified lithospheric framework in the study area.

The regional structural framework is dominated by E–W-trending structures that are overprinted by subordinate NE-, NW-, and N–S-trending faults and folds. This polyphase and multidirectional deformation reflects a complex tectonic history. Well-developed folds, fault systems, and foliations collectively form a dense structural network. , The superposition relationships among magmatic rocks of different ages provide critical constraints on crustal recycling processes during plate tectonic evolution.

The Cancun pluton is located in an area characterized by dense vegetation and limited bedrock exposure. The available outcrops are strongly weathered and altered, which complicates direct petrographic observations. The collected diorite samples are dark gray and exhibit medium- to fine-grained textures. They are composed primarily of plagioclase (50–55%), amphibole (18–22%), biotite (10–15%), quartz (5–8%), and K-feldspar (10–15%), with minor alkali feldspar, magnetite, and zircon (Figure ). Plagioclase and amphibole commonly occur as subhedral to euhedral crystals, whereas quartz and alkali feldspar typically occupy interstitial spaces, indicating a well-defined crystallization sequence during magma solidification.

2.

2

(a) Field photograph of the Cancun pluton outcrop; (b) photomicrograph showing its mineral assemblages and textures. Amp = amphibole, Pl = plagioclase.

3. Analytical Methods

Zircon U–Pb geochronological analyses were carried out at Wuhan Sample Solution Analytical Technology Co., Ltd. Zircon grains were separated using standard magnetic and heavy-liquid techniques, mounted in epoxy resin, polished to expose grain interiors, and carbon-coated. Internal textures were examined by transmitted- and reflected-light microscopy combined with cathodoluminescence (CL) imaging to select inclusion- and crack-free grains for analysis. In-situ U–Pb dating was performed by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS), following the analytical protocol and instrumental parameters described by Zong et al. For calibration, zircon 91500 and NIST 610 were used as external standards to correct for mass bias and elemental fractionation. Offline data processing was performed using ICPMSDataCal (ver. 10.8). Concordia diagrams were plotted and weighted-mean 206Pb/238U ages were calculated with Isoplot (ver. 3.75).

In-situ zircon Lu–Hf isotope analyses were performed at Wuhan Sample Solution Analytical Technology Co., Ltd. using a laser ablation multicollector inductively coupled plasma mass spectrometer (LA-MC-ICP-MS). The system consists of a Geolas HD laser ablation unit (Coherent, Germany) coupled with a Neptune Plus MC-ICP-MS (Thermo Fisher Scientific, Germany). Detailed instrumental settings and analytical procedures followed Hu et al. Zircon standards (91500, GJ-1, and Plešovice) were simultaneously analyzed, which yielded the recommended values within 2σ. The obtained Hf isotopic compositions were 0.282288 ± 11 for 91500 standard, 0.282001 ± 9 for the GJ-1 standard and 0.282472 ± 8 for the Plešovice standard, respectively, consistent with the recommended values with 2σ. The resulting isotopic data were processed offline with ICPMSDataCal (ver. 10.8).

Whole-rock geochemical analyses were performed at Wuhan Sample Solution Analytical Technology Co., Ltd. Major-element concentrations were measured with a Rigaku ZSX Primus II wavelength-dispersive X-ray fluorescence (XRF) spectrometer in accordance with the Chinese national standard GB/T 14506.28–2010 (silicate rock chemical analysis methods); analytical uncertainties were generally better than 5%. Trace element abundances were determined using an Agilent 7700e inductively coupled plasma mass spectrometer (ICP-MS). The analytical precision was within 5%.

Whole-rock Sr–Nd isotopic analyses were conducted on a Thermo Fisher Scientific Neptune Plus multicollector ICP-MS at Wuhan Sample Solution Analytical Technology Co., Ltd. (Wuhan, China). Mass-bias correction was performed by internal normalization based on the reference ratios 88Sr/86Sr = 8.375209 and 146Nd/144Nd = 0.7219. Strontium isotope measurements were calibrated against the NIST SRM 987 standard solution. The resulting mean 87Sr/86Sr ratio of 0.710246 ± 7 (2SD, n = 6) is in excellent agreement with its certified value (0.710241 ± 12). Analyses of the USGS reference materials BCR-2 (basalt) and RGM-2 (rhyolite) gave 87Sr/86Sr ratios of 0.705012 (n = 1) and 0.704145 ± 9 (2SD, n = 1), respectively, consistent with published values. For neodymium isotopes, repeated analysis of the GSB standard produced a mean 143Nd/144Nd ratio of 0.512435 ± 6 (2SD, n = 4), matching the reported reference value (0.512438 ± 6). Analyses of USGS BCR-2 and RGM-2 yielded 143Nd/144Nd ratios of 0.512641 (n = 1) and 0.512811 (n = 1), respectively, which fall within the uncertainty ranges of recommended values.

4. Results

4.1. Zircon U–Pb Geochronology

The analyzed zircon grains are predominantly euhedral to subhedral and range from 100 to 200 μm in length, with aspect ratios between 1:1 and 3:1. Cathodoluminescence (CL) images reveal well-developed oscillatory zoning (Figure ), indicative of magmatic growth. Th/U ratios vary from 0.21 to 1.42, with an average of 0.50, consistent with a magmatic origin. A total of 20 U–Pb analyses were conducted on 20 zircon grains. Ten analyses exhibit discordance greater than 10% (concordance <90%) and were excluded from age calculations. Two grains yielded inherited ages of 432 Ma and 1502 Ma, respectively (Table S1). The remaining eight concordant analyses define a weighted mean 206Pb/238U age of 102.3 ± 3.1 Ma (MSWD = 1.7; Figure ). This age is interpreted as the crystallization age of the Cancun pluton.

3.

3

Zircon U–Pb concordia diagrams and weighted mean ages from the Cancun pluton. The yellow and red circles indicate the analytical area for U–Pb dating and Lu–Hf isotopes.

4.2. Whole-Rock Major and Trace Elements

Whole-rock major and trace element compositions of the samples are presented in Table S2. The samples contain 57.83–60.42 wt % SiO2, 5.13–5.87 wt % MgO, 2.53–2.61 wt % K2O, and 0.16–0.19 wt % P2O5. Total alkali contents (Na2O + K2O) range from 5.56 to 5.65 wt %, with K2O/Na2O ratios of 0.80–0.82. The aluminum saturation index (A/CNK) varies from 0.93 to 0.95, indicating a metaluminous composition. On the total alkali–silica (TAS) diagram (Figure a), all samples plot within the diorite field. On the K2O versus SiO2 diagram (Figure b), they fall predominantly within the high-K calc-alkaline series. For comparison, geochemical data from the Dali pluton in the Dayaoshan region and the Qianjia pluton in Hainan Island are also plotted in Figure . These plutons represent coeval Late Mesozoic magmatic rocks from the southern margin of the South China Block and are included to provide a regional geochemical reference for evaluating the compositional characteristics of the Cancun pluton.

4.

4

(a) Na2O + K2O versus SiO2 diagram (modified after Le Bas et al.); (b) K2O versus SiO2 diagram (modified after Gill), for the Cancun pluton. Data for the Dali pluton and the Qianjia pluton are plotted for regional comparison with the Cancun pluton.

Chondrite-normalized rare earth element (REE) patterns show enrichment in light rare earth elements (LREEs) relative to heavy rare earth elements (HREEs), with (La/Yb) n ratios of 15.13–18.05 (Figure a). HREE patterns are relatively flat. Eu anomalies are moderately negative, with Eu/Eu* values of 0.72–0.74. Primitive mantle-normalized trace element patterns (Figure b) display enrichment in large-ion lithophile elements (LILEs) and depletion in high field strength elements (HFSEs), including Nb, Ta, P, and Ti.

5.

5

(a) Diagrams of chondrite-normalized REE patterns; (b) primitive mantle-normalized trace-element patterns. REE patterns of 30% batch partial melts of the mélange are shown. Bulk solid/melt partition coefficients are calculated for andesitic melts in equilibrium with the mineral assemblages. Individual mineral K d values are from McKenzie and O’Nions. Data sources are the same as those in Figure .

4.3. Sr–Nd–Hf Isotopic Compositions

Whole-rock Sr–Nd and zircon Hf isotopic compositions of the Cancun pluton are presented in Tables S3 and S4. Initial (87Sr/86Sr)i ratios, εNd­(t) and εHf­(t) values were calculated using the respective zircon U–Pb ages. The pluton exhibits (87Sr/86Sr)i ratios of 0.706972–0.707061, εNd­(t) values of −8.74 to −8.71, and εHf­(t) values of −9.95 to −5.66.

5. Discussion

5.1. Magma Source and Petrogenesis of the Cancun Pluton

The Cancun pluton is characterized by high Mg# values (up to 64) and low TFeO/MgO ratios (1.00–1.03), consistent with the compositional criteria for high-Mg diorites (Mg# > 45; TFeO/MgO < 1.5). , The rocks are enriched in LREEs and display pronounced negative Nb–Ta anomalies, indicating involvement of subduction-related components in their source.

5.1.1. Evaluation of Lower Crustal Melting

Experimental studies demonstrate that partial melting of metabasaltic lower crust at high temperatures (∼1100 °C) typically produces metaluminous melts with low Mg# (<44), low compatible element contents (Cr < 20 ppm; Ni < 20 ppm), and relatively high Na2O (>4.3 wt %). , In contrast, the Cancun diorites exhibit significantly higher Mg# (∼64), elevated Cr (∼176 ppm) and Ni (∼133 ppm) concentrations, and lower Na2O (∼3.1 wt %). These discrepancies argue against derivation from simple lower crustal melting. Furthermore, the Hf–Nd isotopic compositions differ from those of typical Cathaysia basement rocks, further suggesting that lower crustal anatexis was not the dominant magma source.

5.1.2. Evaluation of Hydrous Peridotite Melting

High-Mg intermediate magmas can be generated through partial melting of hydrous peridotite at pressures of 1.0–1.7 GPa and temperatures of 1000–1400 °C. , Such melts typically contain high CaO (8.5–10 wt %) and Al2O3 (17–22 wt %) and may carry high-Fo olivine xenocrysts or dunite xenoliths. ,,, However, the Cancun diorites show comparatively low CaO (4.70–4.78 wt %) and Al2O3 (15.31–15.70 wt %), and no olivine xenocrysts or mantle xenoliths were observed in thin section or in the field. In addition, uniformly negative εNd­(t) values (−8.74 to −8.71) are inconsistent with derivation from a depleted mantle source. These features make direct melting of hydrous peridotite unlikely.

5.1.3. Evaluation of Delaminated Lower Crust and Magma Mixing

High-Mg intermediate magmas derived from delaminated lower crust interacting with mantle peridotite commonly exhibit adakitic characteristics, including high Sr/Y and low Y and Yb contents. − In contrast, the Cancun diorites display low Sr/Y ratios (5.59–9.91), relatively high Y (20–31.5 ppm) and Yb (1.55–1.77 ppm) concentrations, and flat HREE patterns. These features are inconsistent with significant residual garnet in the source and therefore do not support a delaminated lower crust model.

Field and petrographic observations also do not reveal evidence of magma mingling (e.g., mafic enclaves). Moreover, the narrow range of εNd­(t) and εHf­(t) values indicates isotopic homogeneity, which is inconsistent with extensive magma mixing between mantle-derived and crust-derived melts.

5.1.4. Mélange Melting Model

The geochemical and isotopic characteristics instead point to interaction between subducted materials and mantle peridotite. Two principal mechanisms may facilitate such transfer: (1) metasomatism of the mantle wedge by slab-derived fluids or melts, , and (2) physical incorporation of sediment and mantle materials into a mélange that subsequently undergoes partial melting. ,

A key distinction is that metasomatism requires sediment melting to precede mantle mixing, a process that can generate significant isotopic heterogeneity with more limited trace element changes. Fundamentally, the two models differ in the physical state of transport (solid mélange vs slab-derived fluids/melts) and the sequence of mixing and trace-element fractionation. Sediment melts have distinct Hf/Nd and Nd/Sr ratios from bulk sediments or slab fluids, , resulting in substantially different Sr–Nd isotopic mixing curves that can discriminate between the mélange diapir and metasomatized mantle models. On a 87Sr/86Sr versus 143Nd/144Nd diagram (Figure ), the data for the Cancun pluton plot along the mixing trend between mantle and bulk sediment, which is diagnostic of the mélange melting model, and not along the trend for mantle and sediment melts (characteristic of the metasomatized mantle model). This relationship is consistent with a mélange melting model. Furthermore, the partial melting of bulk mélange typically generates lower Nd/Sr ratios (mostly <0.1) compared to pure sediment melts. The Cancun pluton exhibits such characteristically low ratios, consistent with a mélange origin. , Third, being less mafic and more fertile than the refractory mantle peridotite, mélange lithologies are capable of undergoing partial melting to produce the observed intermediate–silicic compositions. Additionally, mélange-derived melts are expected to exhibit relatively limited variation in 143Nd/144Nd ratios but more variable Hf/Nd ratios. The Cancun pluton displays this pattern, further supporting derivation from a hybrid mélange source. Batch melting modeling of average mélange compositions indicates that ∼30% partial melting can reproduce the observed REE patterns (Figure a). Collectively, these lines of evidence suggest that the Cancun pluton was generated by partial melting of a sediment-rich mélange diapir within the mantle wedge.

6.

6

(87Sr/86Sr)i versus εNd­(t) diagram. The mixing calculations between the depleted mantle and bulk sediment, 1%, and 20% partial sediment melts follow the method of Nielsen and Marschall. Data for mélange rocks and depleted mantle are from Nielsen and Marschall, and for sediment from Zhu, Data sources are the same as those in Figure .

5.2. Geodynamic Implications

The Cancun pluton crystallized at ∼102 Ma, corresponding to the transition from the Early to Late Cretaceousa period marked by significant tectonic reorganization in South China. Regional geochronological data indicate that Late Mesozoic igneous rocks are widely distributed along the southern margin of the South China Block (SCB), forming an approximately E–W–trending magmatic belt with ages ranging from ∼110 Ma to ∼80 Ma. − This belt extends from Yunnan through Guangxi to Hainan Island and is spatially distinct from the NE-trending Paleo-Pacific magmatic belt developed in eastern South China. Within this regional framework, the ∼102 Ma Cancun diorites represent an early and relatively high-intensity phase of magmatic activity in the central segment of this E–W-trending belt. Although the Paleo-Pacific subduction system has traditionally been invoked to explain widespread NE-trending magmatism in eastern South China, , its applicability to the coeval E–W-trending magmatic belt remains debated. The identification of high-Mg diorites in the southern Dayaoshan area therefore provides new constraints on the tectonic origin of this belt. At present, available geochronological data from southern South China do not show a clear north–south migration of magmatism comparable to that observed in the Paleo-Pacific arc system. Instead, the Late Mesozoic igneous rocks are distributed discontinuously but broadly aligned along the E–W-trending belt. This spatial pattern suggests that the magmatism was likely controlled by regional tectonic stress related to far-field effects of Neo-Tethyan subduction rather than by the progressive advance of a nearby subduction front.

5.2.1. Challenges to the Paleo-Pacific Subduction Model

The SCB occupied a transitional position between the Pacific and eastern Tethys tectonic domains during the Cretaceous. Since the Tethyan subduction system is now located far from the SCB, the widespread late Yanshanian magmatism in southern SCB is therefore primarily linked to Paleo-Pacific Plate subduction, with proposed mechanisms ranging from slab foundering and rollback to back-arc extension. ,− However, this Pacific-centric model relies on a modern tectonic geometry. The Cretaceous position of the Tethyan trench must be reconstructed due to intense post-Cretaceous tectonic reorganization in Southeast Asia. Accounting for key events such as the extrusion of the Indochina Block and the opening of the South China Sea, reconstructions indicate the trench was substantially closer to the South China continent at that time, suggesting its potential influence cannot be dismissed.

The prevailing Paleo-Pacific rollback model faces three fundamental contradictions when applied to the Cancun high-Mg diorites. First, a spatial–temporal mismatch exists. By ∼100 Ma, the Paleo-Pacific magmatic front had retreated to the coastal regions of Zhejiang and Fujian, more than 700 km east of the Dayaoshan area. , No clear age progression or continuous magmatic linkage connects the coastal NE-trending arc to the isolated ∼102 Ma magmatism in interior Guangxi. Second, structural orientation differs significantly. The Paleo-Pacific system is characterized by a NE-trending tectonic grain, whereas the southern SCB magmatic belt, including the Cancun pluton, exhibits a persistent E–W orientation over a distance exceeding 1000 km. − Such geometry implies a stress regime distinct from simple westward subduction or rollback of the Paleo-Pacific plate. Third, the geochemical characteristics differ. As discussed in Section , the Cancun diorites require melting of a sediment-rich mélange source, contrasting with the relatively depleted, fluid-dominated mantle wedge signatures typical of coeval coastal arc granitoids. This compositional contrast suggests that the southern margin tapped into a distinct lithospheric reservoir.

Based on Cretaceous volcanic-sedimentary records in southeastern China, Chen et al. proposed that the influence of Paleo-Pacific Plate subduction was confined to a NNE-trending zone along the continental margin and did not extend westward beyond the Wuyishan belt. The spatial association of Cretaceous adakites, Nb-enriched basalts, and high-Mg andesites/diorites in the southern SCB constrains a petrogenetic model involving Neo-Tethyan ridge subduction and resultant slab window processes. ,,,,− In summary, we conclude that the southern margin of the SCB was influenced by Tethyan subduction during the Cretaceous.

5.2.2. Neo-Tethyan Far-Field Influence

Neo-Tethyan subduction is traditionally considered to be restricted to southwestern China (e.g., Yunnan). However, an increasing body of evidence suggests that northward subduction of the Neo-Tethyan plate exerted far-field tectonic influence on the southern SCB during the Cretaceous. Regional studies have documented a ∼1000-km-long E–W-trending magmatic response extending from Yunnan to Guangxi between ∼110 Ma and ∼80 Ma. − This belt is geometrically decoupled from the NE-trending Paleo-Pacific arc, implying the operation of distinct stress fields. The E–W alignment of the southern belt is consistent with a N–S-directed compressional or transtensional regime, which may reflect eastward transmission of stress associated with Neo-Tethyan convergence. Within this framework, the Cancun pluton can be interpreted as the easternmost manifestation of Neo-Tethyan far-field influence on the SCB interior. It should be noted that the mélange source inferred for the Cancun diorites does not necessarily imply that active subduction occurred beneath the southern Dayaoshan area during the Early Cretaceous. Mélange materials may have formed during earlier subduction events and remained preserved within the lithospheric mantle beneath the southern margin of the SCB. In particular, substantial geological evidence suggests that the study area underwent significant Paleo-Tethyan subduction during the Early Paleozoic, as evidenced by the development of arc-type TTG suites and associated magmatic–metamorphic assemblages in the Dayaoshan region. , On a broader scale, Paleo-Tethyan convergence along the southern margin of the SCB led to extensive arc magmatism, crustal reworking, and sediment recycling, all of which are conducive to the formation of sediment–mantle mélanges within subduction channels. Such mélanges may have been retained in the lithospheric mantle as long-lived and compositionally heterogeneous reservoirs. Under this framework, the ∼ 102 Ma magmatic event is interpreted to reflect the reactivation and partial melting of this fossil subduction-modified mantle source, likely induced by far-field tectonic stresses associated with Neo-Tethyan convergence, rather than by local slab subduction. This interpretation is consistent with observations from many continental regions, where ancient subduction-modified lithospheric domains are preserved and can be reactivated during subsequent tectonic events.

In this scenario, the ∼102 Ma magmatism reflects the reactivation and partial melting of this pre-existing subduction-modified mantle source, which was triggered by far-field tectonic stresses related to Neo-Tethyan convergence rather than by local slab subduction. We propose a two-stage geodynamic model: Stage 1 (source fertilization): The mantle wedge beneath the southern SCB was metasomatized and fertilized by subducted materials (forming the mélange) during earlier subduction cycles (e.g., Paleo-Tethys or early Paleo-Pacific stages). Stage 2 (tectonic reactivation): At ∼102 Ma, the far-field stress from the Neo-Tethyan subduction acted as a geodynamic trigger, causing lithospheric thinning and the melting of this fossil mélange source. Accordingly, the geochemical characteristics of the magmatism were inherited from this pre-existing subduction-related mantle reservoir. We further suggest that far-field stresses associated with Neo-Tethyan convergence may have induced lithospheric thinning beneath the southern margin of the SCB, thereby promoting asthenospheric upwelling and triggering the melting of the fossil mélange source. Although direct geophysical evidence for lithospheric thinning in the Dayaoshan area remains limited, several independent geological and geochemical observations provide indirect support for this interpretation. First, the formation of high-Mg diorites requires substantial interaction between mantle-derived melts and crustal components, implying the involvement of a relatively hot and dynamic mantle source, which is commonly linked to lithospheric thinning or weakening. Second, the involvement of a mélange source within the lithospheric mantle suggests that previously stored subduction-modified domains were thermally reactivated, a process that generally requires enhanced heat input from the underlying asthenosphere. On a broader regional scale, numerous studies have documented widespread lithospheric thinning and destruction beneath South China during the Late Mesozoic, particularly in the Cretaceous. ,, This process is commonly attributed to interactions among multiple subduction systems, including Paleo-Pacific slab rollback and Tethyan tectonics, and is characterized by elevated mantle heat flow, extensive magmatism, and lithospheric extension. Therefore, it is reasonable to infer that similar lithospheric thinning processes may also have affected the southern margin of the SCB, including the Dayaoshan area.

5.2.3. A Multi-Slab Geodynamic Framework

The statistical and geochemical data reveal a clear geodynamic decoupling between the southern and eastern margins of the SCB during the mid-Cretaceous. The NE-trending belt is a classic product of the Paleo-Pacific subduction system, characterized by a well-documented migration of the magmatic front toward the coastline in response to plate rollback. In contrast, the E–W-trending belt, which includes the Cancun pluton, shows no such age-gradient. Its stable E–W structural grain for over 1000 km requires a N–S–directed stress field, which is geometrically incompatible with the westward subduction or simple rollback of the Paleo-Pacific plate. Geochemically, the Cancun diorites and other igneous rocks in the E–W belt exhibit significantly more enriched isotopic signatures compared to the coeval NE-trending arc granitoids (Figure ). This indicates that the southern margin tapped into a specialized, sediment-rich fossil mélange source, triggered by northward-directed far-field stress from the Neo-Tethys, rather than the fluid-dominated, relatively depleted mantle wedge typical of the Paleo-Pacific system. Based on this broader regional comparison, we conclude that the mid-Cretaceous geodynamics of East Asia was governed by a multislab system.

7.

7

Zircon U–Pb ages versus εHf­(t) diagram of the Late Cretaceous granitic rocks in South China. Data sources are from Tian et al.

The Southern Dayaoshan area acted as a pivotal junction within this framework. While the eastern margin of the SCB was dominated by the retreating Paleo-Pacific plate, the southern margin was simultaneously overprinted by the Neo-Tethyan geodynamic domain. The northward subduction of the Neo-Tethyan plate (or ridge subduction) provided the necessary far-field trigger to reactivate the southern SCB’s lithosphere, leading to the melting of deep-seated high-Mg sources. This model reconciles the unique petrogenesis of the Cancun pluton, its E–W spatial distribution, and the contrasting magmatic flavors of the two belts across South China. Furthermore, the recognition of Paleo-Tethyan subduction-related magmatic records in the Dayaoshan region provides an important temporal link between early subduction processes and later magmatic reactivation. This relationship highlights the role of inherited lithospheric heterogeneity in controlling magma genesis and supports a model in which ancient subduction signatures can be preserved and reactivated during subsequent tectonic events.

6. Conclusions

Based on an integrated study of the mineralogy, whole-rock geochemistry, and zircon U–Pb geochronology of the Cancun pluton, this study reaches the following conclusions:

  • (1)

    The Cancun pluton represents a newly recognized occurrence of Early Cretaceous high-Mg diorite (∼102 Ma) in the southern Dayaoshan area of the SCB. The rocks are characterized by elevated Mg# values and low TFeO/MgO ratios, consistent with high-Mg dioritic compositions.

  • (2)

    Zircon LA-ICP-MS U–Pb dating yields a weighted mean 206Pb/238U age of 102.3 ± 3.1 Ma, constraining emplacement to the Early–Late Cretaceous transition.

  • (3)

    The geochemical and isotopic signatures indicate that these high-Mg diorites were generated by partial melting of mélange diapirs, which comprised subducted sediments and mantle-wedge peridotite. This magmatism was likely influenced by far-field tectonic processes related to Neo-Tethyan subduction, rather than being solely controlled by Paleo-Pacific slab rollback.

Supplementary Material

ao6c00461_si_001.xlsx (30.7KB, xlsx)

Acknowledgments

Financial support for this research was provided by the National Natural Science Foundation of China (Grant No. 42166003) and the Guangxi Scientific Projects (Grant No. 2025GXNSFAA069324).

The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsomega.6c00461.

  • LA-ICP-MS zircon U–Pb dating and zircon analysis data for the Cancun pluton (Table S1); major (wt %) and trace element (ppm) compositions of the Cancun pluton (Table S2); whole rock Sr–Nd isotopic compositions of the Cancun pluton (Table S3); and zircon LA-MC-ICP-MS Lu–Hf isotopic compositions for the Cancun pluton (Table S4) (XLSX)

§.

Y.W. and L.M. contributed equally to this work.

The authors declare no competing financial interest.

References

  1. Tatsumi Y.. High-Mg andesites in the Setouchi volcanic belt, southwestern Japan: Analogy to Archean magmatism and continental crust formation? Annu. Rev. Earth Planet. Sci. 2006;34:467–499. doi: 10.1146/annurev.earth.34.031405.125014. [DOI] [Google Scholar]
  2. Kelemen P. B.. Genesis of high Mg# andesites and the continental crust. Contrib. Mineral. Petrol. 1995;120(1):1–19. doi: 10.1007/BF00311004. [DOI] [Google Scholar]
  3. Hanyu T., Tatsumi Y., Nakai S., Chang Q., Miyazaki T., Sato K., Tani K., Shibata T., Yoshida T.. Contribution of slab melting and slab dehydration to magmatism in the NE Japan arc for the last 25 Myr: Constraints from geochemistry. Geochem. Geophys. Geosyst. 2006;7:Q08002. doi: 10.1029/2005GC001220. [DOI] [Google Scholar]
  4. Rapp R. P., Shimizu N., Norman M. D., Applegate G. S.. Reaction between slab-derived melts and peridotite in the mantle wedge: experimental constraints at 3.8 GPa. Chem. Geol. 1999;160(4):335–356. doi: 10.1016/S0009-2541(99)00106-0. [DOI] [Google Scholar]
  5. Kamei A., Owada M., Nagao T., Shiraki K.. High-Mg diorites derived from sanukitic HMA magmas, Kyushu Island, southwest Japan arc: evidence from clinopyroxene and whole rock compositions. Lithos. 2004;75(3–4):359–371. doi: 10.1016/j.lithos.2004.03.006. [DOI] [Google Scholar]
  6. Li Z. X., Li X. H.. Formation of the 1300-km-wide intracontinental orogen and postorogenic magmatic province in Mesozoic South China: A flat-slab subduction model. Geology. 2007;35(2):179–182. doi: 10.1130/G23193A.1. [DOI] [Google Scholar]
  7. Zhou X. M., Sun T., Shen W. Z., Shu L. S., Niu Y. L.. Petrogenesis of Mesozoic granitoids and volcanic rocks in South China: A response to tectonic evolution. Episodes. 2006;29(1):26–33. doi: 10.18814/epiiugs/2006/v29i1/004. [DOI] [Google Scholar]
  8. Zhang L., Hu Y., Liang J., Ireland T., Chen Y., Zhang R., Sun S., Sun W.. Adakitic rocks associated with the Shilu copper-molybdenum deposit in the Yangchun Basin, South China, and their tectonic implications. Acta Geochim. 2017;36(2):132–150. doi: 10.1007/s11631-017-0146-6. [DOI] [Google Scholar]
  9. Sun S. J., Zhang L. P., Zhang R. Q., Ding X., Zhu H. L., Zhang Z. F., Sun W. D.. Mid-Late Cretaceous igneous activity in South China: the Qianjia example, Hainan Island. Int. Geol. Rev. 2018;60(11–14):1665–1683. doi: 10.1080/00206814.2017.1402379. [DOI] [Google Scholar]
  10. Fang N. Q.. A new model on the Mesozoic “South China Sea”(SCS): Reconstructing the Hainan marginal arc and recognizing the Tethyan SCS. Earth Sci. Front. 2016;23(6):107–119. [Google Scholar]
  11. Liu Y., Fang N. Q., Qiang M. L., Jia L., Song C. J.. The Cretaceous igneous rocks in southeastern Guangxi and their implication for tectonic environment in southwestern South China Block. Open Geosciences. 2020;12(1):518–531. doi: 10.1515/geo-2020-0160. [DOI] [Google Scholar]
  12. Hu P. C., Zhu W. G., Zhong H., Zhang R. Q., Zhao X. Y., Mao W.. Late Cretaceous granitic magmatism and Sn mineralization in the giant Yinyan porphyry tin deposit, South China: constraints from zircon and cassiterite U-Pb and molybdenite Re-Os geochronology. Miner. Deposita. 2021;56(4):743–765. doi: 10.1007/s00126-020-00997-3. [DOI] [Google Scholar]
  13. Xu H., Ni Z. X., Huang B. C., Han S. P., Wang C. Y., Chen Y.. Determination of Early Paleozoic TTG intrusive rocks at the southeast edge of Dayao Mountain, Guangxi. Geol. China. 2016;43(3):780–796. [Google Scholar]
  14. Xu H., Han S., Zhong F., Huang Q., Bai X., Chen Z.. Characteristics, petrogenesis and tectonic implications of the Jurassic adakitic granites at southeast edge of Dayao Mountain, Guangxi. Acta Petrol. Mineral. 2021;40(6):1074–1092. [Google Scholar]
  15. Zhang K., Xu D., Hu J., Li Y., Lu Y., Hu J.. Petrogenesis of Granites in the Siwei Silver Mine Area of Wuzhou, Guangxi_ Constraints from Zircon U - Pb Chronology, Petrochemistry and Hf Isotopes. Geol. Explor. 2018;54(1):102–111. [Google Scholar]
  16. Qin Y., Zhang Q., Kang Z., Li S., Ye M.. Geochronological Framework of Granitoids in Dayaoshan Metallogenic Belt Eastern Guangxi Province. J. Jilin Univ. 2015;45(6):1735–1756. [Google Scholar]
  17. Yang Q. J., Sun M. H., Qin Y., Zhang Q. W.. Study on geochronology and geological significance of Dali granitoids of Dayaoshan, Guangxi. Miner. Resour. Geol. 2017;31(5):843–853. [Google Scholar]
  18. Pang C. W., Shi Y., Liang R. X., Wang Y. Q., Tang Y. L., Liu X. J.. Petrogenesis and tectonic significance of I-type granitoids in Dafoding pluton, southern Dayaoshan in Guangxi. J. Guilin Univ. Technol. 2022;42(4):783–798. [Google Scholar]
  19. Zong K. Q., Klemd R., Yuan Y., He Z. Y., Guo J. L., Shi X. L., Liu Y. S., Hu Z. C., Zhang Z. M.. The assembly of Rodinia: The correlation of early Neoproterozoic (ca. 900 Ma) high-grade metamorphism and continental arc formation in the southern Beishan Orogen, southern Central Asian Orogenic Belt (CAOB) Precambrian Res. 2017;290:32–48. doi: 10.1016/j.precamres.2016.12.010. [DOI] [Google Scholar]
  20. Hu Z. C., Li X. H., Luo T., Zhang W., Crowley J., Li Q. L., Ling X. X., Yang C., Li Y., Feng L. P., Xia X. P., Zhang S. B., Wang Z. C., Guo J. L., Xu L., Lin J., Liu X. M., Bao Z. A., Liu Y. S., Zong K. Q., Chen W., Hu S. H.. Tanz zircon megacrysts: a new zircon reference material for the microbeam determination of U-Pb ages and Zr-O isotopes. J. Anal. At. Spectrom. 2021;36(12):2715–2734. doi: 10.1039/D1JA00311A. [DOI] [Google Scholar]
  21. Liu Y. S., Gao S., Hu Z. C., Gao C. G., Zong K. Q., Wang D. B.. Continental and Oceanic Crust Recycling-induced Melt-Peridotite Interactions in the Trans-North China Orogen: U-Pb Dating, Hf Isotopes and Trace Elements in Zircons from Mantle Xenoliths. J. Petrol. 2010;51(1–2):537–571. doi: 10.1093/petrology/egp082. [DOI] [Google Scholar]
  22. Ludwig K. R.. User’s manual for Isoplot 3.75: A geochronological toolkit for Microsoft Excel. Berkeley Geochronol. Center Spec. Publ. 2012;5:1–70. [Google Scholar]
  23. Hu Z. C., Liu Y. S., Gao S., Liu W. G., Zhang W., Tong X. R., Lin L., Zong K. Q., Li M., Chen H. H., Zhou L., Yang L.. Improved in situ Hf isotope ratio analysis of zircon using newly designed X skimmer cone and jet sample cone in combination with the addition of nitrogen by laser ablation multiple collector ICP-MS. J. Anal. At. Spectrom. 2012;27(9):1391–1399. doi: 10.1039/c2ja30078h. [DOI] [Google Scholar]
  24. Zhang W., Hu Z. C.. Estimation of Isotopic Reference Values for Pure Materials and Geological Reference Materials. At. Spectrosc. 2020;41(3):93–102. doi: 10.46770/AS.2020.03.001. [DOI] [Google Scholar]
  25. Lin J., L Y. S., Yang Y. H., Hu Z. C.. Calibration and correction of LA-ICP-MS and LA-MC-ICP-MS analyses for element contents and isotopic ratios - ScienceDirect. Solid Earth Science. 2016;1(1):5–27. doi: 10.1016/j.sesci.2016.04.002. [DOI] [Google Scholar]
  26. Thirlwall M. F.. Long-term reproducibility of multicollector Sr and Nd isotope ratio analysis. Chem. Geol. 1991;94(2):85–104. doi: 10.1016/S0009-2541(10)80021-X. [DOI] [Google Scholar]
  27. Li C. Y., Zhang H., Wang F. Y., Liu J. Q., Sun Y. L., Hao X. L., Li Y. L., Sun W. D.. The formation of the Dabaoshan porphyry molybdenum deposit induced by slab rollback. Lithos. 2012;150:101–110. doi: 10.1016/j.lithos.2012.04.001. [DOI] [Google Scholar]
  28. Li J., Tang S. H., Zhu X. K., Pan C. X.. Production and Certification of the Reference Material GSB 04–3258–2015 as a 143Nd/144Nd Isotope Ratio Reference. Geostand. Geoanal. Res. 2017;41(2):252–262. doi: 10.1111/ggr.12151. [DOI] [Google Scholar]
  29. Winchester J. A., Floyd P. A.. Geochemical discrimination of different magma series and their differentiation products using immobile elements. Chem. Geol. 1977;20(1):325–343. doi: 10.1016/0009-2541(77)90057-2. [DOI] [Google Scholar]
  30. Le Bas M. J., Le Maitre R. W., Streckeisen A., Zanettin B. A.. Chemical Classification of Volcanic Rocks Based on the Total Alkali-Silica Diagram. J. Petrol. 1986;27(3):745–750. [Google Scholar]
  31. Gill, T. B. Orogenic Andesite and Plate Tectonics. Springer-Verlag: Berlin, 1981. [Google Scholar]
  32. McKenzie D., O’Nions R. K.. Partial Melt Distributions from Inversion of Rare Earth Element Concentrations. J. Petrol. 1991;32(5):1021–1091. doi: 10.1093/petrology/32.5.1021. [DOI] [Google Scholar]
  33. Kelemen P. B.. Petrology, Genesis of high Mg# andesites and the continental crust. Contrib. Mineral. Petrol. 1995;120(1):1–19. doi: 10.1007/BF00311004. [DOI] [Google Scholar]
  34. Tatsumi Y., Hanyu T.. Geochemical modeling of partial melting of subducting sediments and subsequent melt-mantle interaction: Generation of high-Mg andesites in the Setouchi volcanic belt, southwest Japan. Geology. 2001;29(4):323–326. doi: 10.1130/0091-7613(2001)029<0323:GMOPMO>2.0.CO;2. [DOI] [Google Scholar]
  35. Rapp R. P., Watson E. B.. Dehydration Melting of Metabasalt at 8–32 kbar: Implications for Continental Growth and Crust-Mantle Recycling. J. Petrol. 1995;36(4):891–931. doi: 10.1093/petrology/36.4.891. [DOI] [Google Scholar]
  36. Zhu J. J., Hu R. Z., Bi X. W., Zhong H., Chen H.. Zircon U-Pb ages, Hf-O isotopes and whole-rock Sr-Nd-Pb isotopic geochemistry of granitoids in the Jinshajiang suture zone, SW China: Constraints on petrogenesis and tectonic evolution of the Paleo-Tethys Ocean. Lithos. 2011;126(3–4):248–264. doi: 10.1016/j.lithos.2011.07.003. [DOI] [Google Scholar]
  37. Wood B. J., Turner S. P.. Origin of primitive high-Mg andesite: Constraints from natural examples and experiments. Earth Planet. Sci. Lett. 2009;283(1–4):59–66. doi: 10.1016/j.epsl.2009.03.032. [DOI] [Google Scholar]
  38. Straub S. M., Gomez-Tuena A., Stuart F. M., Zellmer G. F., Espinasa-Perena R., Cai Y., Iizuka Y.. Formation of hybrid arc andesites beneath thick continental crust. Earth Planet. Sci. Lett. 2011;303(3–4):337–347. doi: 10.1016/j.epsl.2011.01.013. [DOI] [Google Scholar]
  39. Tatsumi Y., Hanyu T.. Geochemical modeling of dehydration and partial melting of subducting lithosphere: Toward a comprehensive understanding of high-Mg andesite formation in the Setouchi volcanic belt, SW Japan. Geochem. Geophys. Geosyst. 2003;4(9):1081. doi: 10.1029/2003GC000530. [DOI] [Google Scholar]
  40. Qian Q., Hermann J.. Formation of High-Mg Diorites through Assimilation of Peridotite by Monzodiorite Magma at Crustal Depths. J. Petrol. 2010;51(7):1381–1416. doi: 10.1093/petrology/egq023. [DOI] [Google Scholar]
  41. Xu J. F., Shinjo R., Defant M. J., Wang Q., Rapp R. P.. Origin of Mesozoic adakitic intrusive rocks in the Ningzhen area of east China: Partial melting of delaminated lower continental crust? Geology. 2002;30(12):1111–1114. doi: 10.1130/0091-7613(2002)030<1111:OOMAIR>2.0.CO;2. [DOI] [Google Scholar]
  42. Gao S., Rudnick R. L., Yuan H. L., Liu X. M., Liu Y. S., Xu W. L., Ling W. L., Ayers J., Wang X. C., Wang Q. H.. Recycling lower continental crust in the North China craton. Nature. 2004;432(7019):892–897. doi: 10.1038/nature03162. [DOI] [PubMed] [Google Scholar]
  43. Wang Q., Xu J. F., Jian P., Bao Z. W., Zhao Z. H., Li C. F., Xiong X. L., Ma J. L.. Petrogenesis of adakitic porphyries in an extensional tectonic setting, dexing, South China: Implications for the genesis of porphyry copper mineralization. J. Petrol. 2006;47(1):119–144. doi: 10.1093/petrology/egi070. [DOI] [Google Scholar]
  44. Moyen J. F.. High Sr/Y and La/Yb ratios: The meaning of the ″adakitic signature″. Lithos. 2009;112(3–4):556–574. doi: 10.1016/j.lithos.2009.04.001. [DOI] [Google Scholar]
  45. Class C., Miller D. M., Goldstein S. L., Langmuir C. H.. Distinguishing melt and fluid subduction components in Umnak Volcanics, Aleutian Arc. Geochem. Geophys. Geosyst. 2000;1:1004. doi: 10.1029/1999GC000010. [DOI] [Google Scholar]
  46. Kessel R., Schmidt M. W., Ulmer P., Pettke T.. Trace element signature of subduction-zone fluids, melts and supercritical liquids at 120–180 km depth. Nature. 2005;437(7059):724–727. doi: 10.1038/nature03971. [DOI] [PubMed] [Google Scholar]
  47. Marschall H. R., Schumacher J. C.. Arc magmas sourced from melange diapirs in subduction zones. Nat. Geosci. 2012;5(12):862–867. doi: 10.1038/ngeo1634. [DOI] [Google Scholar]
  48. Nielsen S. G., Marschall H. R.. Geochemical evidence for melange melting in global arcs. Sci. Adv. 2017;3(4):e1602402. doi: 10.1126/sciadv.1602402. [DOI] [PMC free article] [PubMed] [Google Scholar]
  49. Codillo E. A., Le Roux V., Marschall H. R.. Arc-like magmas generated by melange-peridotite interaction in the mantle wedge. Nat. Commun. 2018;9:2864. doi: 10.1038/s41467-018-05313-2. [DOI] [PMC free article] [PubMed] [Google Scholar]
  50. Chen W. F., Chen P. R., Xu X. S., Zhang M.. Geochemical characteristics of Cretaceous basaltic rocks in South China and constraints on Pacific plate subduction. Sci. China, Ser. D:Earth Sci. 2005;48(12):2104–2117. doi: 10.1360/04yd0149. [DOI] [Google Scholar]
  51. Nielsen S. G., Yogodzinski G., Prytulak J., Plank T., Kay S. M., Kay R. W., Blusztajn J., Owens J. D., Auro M., Kading T.. Tracking along-arc sediment inputs to the Aleutian arc using thallium isotopes. Geochim. Cosmochim. Acta. 2016;181:217–237. doi: 10.1016/j.gca.2016.03.010. [DOI] [Google Scholar]
  52. Zhang Y., Zhang Q. C., Wang X.. Petrogenesis of early Paleozoic syn-collisional granitoids and enclaves in Western Kunlun, Northwest China: Implications for the growth of continental crust. Lithos. 2024;488–489:107844. doi: 10.1016/j.lithos.2024.107844. [DOI] [Google Scholar]
  53. Hao L. L., Wang Q., Wyman D. A., Ou Q., Dan W., Jiang Z. Q., Yang J. H., Li J., Long X. P.. Andesitic crustal growth via melange partial melting: Evidence from Early Cretaceous arc dioritic/andesitic rocks in southern Qiangtang, central Tibet. Geochem. Geophys. Geosyst. 2016;17(5):1641–1659. doi: 10.1002/2016GC006248. [DOI] [Google Scholar]
  54. Wang Q., Li X. H., Jia X. H., Wyman D., Tang G. J., Li Z. X., Ma L., Yang Y. H., Jiang Z. Q., Gou G. N.. Late Early Cretaceous adakitic granitoids and associated magnesian and potassium-rich mafic enclaves and dikes in the Tunchang-Fengmu area, Hainan Province (South China): Partial melting of lower crust and mantle, and magma hybridization. Chem. Geol. 2012;328:222–243. doi: 10.1016/j.chemgeo.2012.04.029. [DOI] [Google Scholar]
  55. Wang X. Y., Yang Z., Chen N. S., Liu R.. Petrogenesis and Ore Genesis of the Late Yanshanian Granites and Associated Porphyry-Skarn W-Mo Deposits from the Yunkai Area of South China: Evidence from the Zircon U-Pb Ages, Hf Isotopes and Sulfide S-Fe Isotopes. J. Earth Sci. 2018;29(4):939–959. doi: 10.1007/s12583-017-0901-1. [DOI] [Google Scholar]
  56. Cui Y. C., Shao L., Li Z. X., Zhu W. L., Qiao P. J., Zhang X. T.. A Mesozoic Andean-type active continental margin along coastal South China: New geological records from the basement of the northern South China Sea. Gondwana Res. 2021;99:36–52. doi: 10.1016/j.gr.2021.06.021. [DOI] [Google Scholar]
  57. Sun L. Q., Ling H. F., Zhao K. D., Chen P. R., Chen W. F., Sun T., Shen W. Z., Huang G. L.. Petrogenesis of Early Cretaceous adakitic granodiorite: Implication for a crust thickening event within the Cathaysia Block, South China. Sci. China Earth Sci. 2017;60(7):1237–1255. doi: 10.1007/s11430-016-5200-y. [DOI] [Google Scholar]
  58. Jiang X. Y., Dilek Y., Li X. H.. Cretaceous magmatic arc in Hainan and the peri-South China Sea as evidenced by geochemical fingerprinting of granitoids in the region. Geosci. Front. 2024;15(5):101866. doi: 10.1016/j.gsf.2024.101866. [DOI] [Google Scholar]
  59. Li S. Z., Suo Y. H., Li X. Y., Zhou J., Santosh M., Wang P. C., Wang G. Z., Guo L. L., Yu S. Y., Lan H. Y., Dai L. M., Zhou Z. Z., Cao X. Z., Zhu J. J., Liu B., Jiang S. H., Wang G., Zhang G. W.. Mesozoic tectono-magmatic response in the East Asian ocean-continent connection zone to subduction of the Paleo-Pacific Plate. Earth-Sci. Rev. 2019;192:91–137. doi: 10.1016/j.earscirev.2019.03.003. [DOI] [Google Scholar]
  60. Liu Z. H., Zhang Y. Z., Yu X. Q., Qian X., Gan C. S., Sheldrick T. C., Wang Y. J.. Late Mesozoic magmatism in Hainan Island, South China: Fingerprinting the transition from low-angle to high-angle subduction of the Paleo-Pacific plate. Geol. Soc. Am. Bull. 2026;138:1065–1084. doi: 10.1130/B38397.1. [DOI] [Google Scholar]
  61. Shu L. S., Deng P., Wang B., Tan Z. Z., Yu X. Q., Sun Y.. Lithology, kinematics and geochronology related to Late Mesozoic basin-mountain evolution in the Nanxiong-Zhuguang area, South China. Sci. China, Ser. D:Earth Sci. 2004;47(8):673–688. doi: 10.1360/03yd0113. [DOI] [Google Scholar]
  62. Zhou Y., Liang X. Q., Kröner A., Cai Y. F., Shao T. B., Wen S., Jiang Y., Fu J. G., Wang C., Dong C. G.. Late Cretaceous lithospheric extension in SE China: Constraints from volcanic rocks in Hainan Island. Lithos. 2015;232:100–110. doi: 10.1016/j.lithos.2015.06.028. [DOI] [Google Scholar]
  63. Yuan X., Fang N., Dong H.. Geochronology, Geochemistry and Tectonic Significance of Gaofeng and Baocheng Granite Batholiths in Hainan Island. Geoscience. 2019;33(1):85–97. [Google Scholar]
  64. Tian M. Y., Di Y. J., Yang M. J.. Origin of Late Cretaceous A-type granitoids in South China: Response to the rollback and retreat of the Paleo-Pacific plate. Open Geosci. 2024;16(1):20220733. doi: 10.1515/geo-2022-0733. [DOI] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Supplementary Materials

ao6c00461_si_001.xlsx (30.7KB, xlsx)

Articles from ACS Omega are provided here courtesy of American Chemical Society

RESOURCES