Zn(AsO3)2 is isotypic with the low-temperature modification of Zn(PO3)2 and consists of AsO4 tetrahedra condensed into polyarsenate chains with a periodicity of two tetrahedra.
Keywords: crystal structure, structural comparison, isotypism, polyarsenate chain
Abstract
Zinc bis[catena-arsenate(V)] or catena-poly[zinc-di-μ-arsenato(V)-κ4O:O], [Zn(AsO3)2]n, is isotypic with the low-temperature modification of Zn(PO3)2. The asymmetric unit comprises one Zn atom situated on a twofold rotation axis and one As and three O atoms in general positions. In the crystal structure, the principal building units, ZnO6 octahedra and AsO4 tetrahedra, are condensed into 1∞[ZnO4/2O2/1] zigzag chains and (AsO3)2 polyarsenate chains with a periodicity of two AsO4 tetrahedra, respectively. The two types of chains extend parallel to [001] and are fused into a compact framework structure. Compared with divalent transition metal arsenates and other arsenates of the formula MIIAs2O6, Zn(AsO3)2 is unique in that arsenic is present exclusively in a tetrahedral coordination and not in a mixed tetrahedral/octahedral or purely octahedral coordination.
1. Chemical context
The zinc arsenate Zn(AsO3)2 has been reported as one of the phases existing in the pseudo-binary system ZnO–As2O5 (Kasenov et al., 1996 ▸). Whereas for the other phases reported in this system complete crystal structure determinations have been carried out in the meantime (details are given in the database survey), for Zn(AsO3)2 only unit-cell parameters were given on basis of a powder X-ray diffraction study: crystal system orthorhombic with a = 8.625, b = 9.035, c = 12.494 Å, V = 933 Å3 (Mustafin & Kasenov, 1994 ▸, 1996 ▸). Recent results of crystal structure prediction methods claimed the possible existence of Zn(AsO3)2 (or as stated there of ZnAs2O6). Whereas one study states that this phase has an existence probability of 0.9105 with a polar structure (Gake et al., 2025 ▸; data given in the supporting information) the other states that it crystallizes in the centrosymmetric PbSb2O6 structure type with trigonal symmetry (Griesemer et al., 2025 ▸; supplementary material of this article: OQMD ID 1348395).
We sought to investigate these conflicting claims and carried out experiments on the crystal growth of Zn(AsO3)2. Using a reaction similar to that described by Kasenov et al. (1996 ▸), we were able to isolate single crystals of Zn(AsO3)2 (I) and report here on the results of the crystal structure analysis.
2. Structural commentary
Our study does not confirm any of the previous statements made regarding the orthorhombic unit cell or possible crystal structures. Compound (I) crystallizes in the monoclinic system in the centrosymmetric space group C2/c and is isotypic with the corresponding phosphate, i.e. low-temperature Zn(PO3)2 (Averbuch-Pouchot et al., 1983 ▸). The unit cell of Zn(AsO3)2 reported by Mustafin & Kasenov (1994 ▸, 1996 ▸) has a doubled volume compared to the unit cell determined here, however, with no apparent metrical relation beyond this.
In the crystal structure of Zn(AsO3)2, the Zn atom is located on a twofold rotation axis (multiplicity 4, Wyckoff letter e), and the As and the three O atom sites on general positions (8f) of space group C2/c. The zinc atom in (I) exhibits a distorted octahedral coordination environment with an average Zn—O bond length of 2.090 Å (Table 1 ▸), in good agreement with the literature value of 2.110 (86) Å derived from 193 [ZnO6] coordination polyhedra (Gagné & Hawthorne, 2020 ▸). The [ZnO6] octahedron shares two of its edges with neighbouring octahedra, forming 1∞[ZnO4/2O2/1] zigzag-chains extending parallel to [001] (Fig. 1 ▸a). The arsenate tetrahedron condenses into a polyarsenate chain with a periodicity of two tetrahedra (Fig. 1 ▸b). The bond length distribution (Table 1 ▸) in this chain follows the usual pattern, with significantly longer As—O distances to the bridging oxygen atoms (O1, average 1.735 Å) than to the terminal O atoms (O2, O3; average 1.646 Å). The mean average As—O bond length within the AsO4 tetrahedron (1.690 Å) complies with the literature value [1.687 (27) Å from 508 arsenate tetrahedra; Gagné & Hawthorne, 2018 ▸]. The terminal oxygen atoms of the polyarsenate chain are also the ones that bind to the zinc atoms in adjacent zinc oxide chains, so that the polyarsenate chains are aligned in the same direction as the zinc oxide chains, which leads to a very compact packing in this type of structure (Durif, 1995 ▸). In the crystal structure of (I) (Fig. 2 ▸), each zinc oxide chain is surrounded by six polyarsenate chains, and each polyarsenate chain is surrounded by three zinc oxide chains, corresponding to the 1:2 ratio of Zn:As in the formula.
Table 1. Selected bond lengths (Å).
| Zn1—O3 | 2.0276 (10) | As1—O2 | 1.6518 (10) |
| Zn1—O2i | 2.0786 (10) | As1—O1iii | 1.7319 (10) |
| Zn1—O2ii | 2.1640 (10) | As1—O1iv | 1.7379 (10) |
| As1—O3 | 1.6336 (10) |
Symmetry codes: (i)
; (ii)
; (iii)
; (iv)
.
Figure 1.

(a) One 1∞[ZnO4/2O2/1] zigzag chain, and (b) one polyarsenate chain crossing the unit cell of (I), as shown in projections down [
00]. Displacement ellipsoids are drawn at the 97% probability level. [Symmetry codes: (i) x +
, y +
, z; (ii) −x + 1, −y + 1, −z + 1; (iii) −x + 1, y, −z +
; (iv) x, −y + 1, z −
; (v) −x +
, y +
, −z +
; (vi) −x +
, −y +
, −z.]
Figure 2.

The crystal structure of (I) in polyhedral representation (ZnO6 octahedra blue, AsO4 tetrahedra red), viewed down [00
]. Displacement ellipsoids are drawn at the 97% probability level.
The structure model was confirmed using bond-valence-sum calculations (Brown, 2002 ▸) performed with the ECoN21 program (Ilinca, 2022 ▸). The calculated bond-valence sums (Table 2 ▸) are close to the expected values of 2, 5 and 2 valence units for Zn, As and O atoms, respectively, and the global instability index (GII) of 0.11 valence units indicates a stable and not particularly strained crystal structure (Salinas-Sanchez et al., 1992 ▸; Brown, 2009 ▸).
Table 2. Bond-valence-sum calculations (in valence units) for Zn(AsO3)2.
| Zn1 | As1 | Σ | |
| O1 | 1.10, 1.08 | 2.18 | |
| O2 | 0.36 (1×→, 2×↓), 0.29 (1×→, 2×↓) | 1.38 | 2.03 |
| O3 | 0.41 (1×→, 2×↓) | 1.45 | 1.86 |
| Σ | 2.12 | 5.01 |
Using the compstru program (de la Flor et al., 2016 ▸) that is available at the Bilbao Crystallographic Server (Aroyo et al., 2006 ▸), a quantitative comparison of the isotypic structures of low-temperature Zn(PO3)2 and Zn(AsO3)2 was made. The arithmetic mean of the distance between paired atoms is 0.1148 Å, and the absolute distances between paired atoms are 0.0925 Å for Zn1, 0.0598 Å for As1/P1, 0.0901 Å for O1, 0.1146 Å for O2, and the largest distance of 0.2057 Å for O3. The latter O atoms are those which, in both structures, have both the shortest Zn—O and the shortest X—O (X = As, P) bond lengths. The degree of lattice distortion (0.0264), and the low value for the measure of similarity (0.023) indicate a high degree of similarity for the two crystal structures.
3. Database survey
The Inorganic Crystal Structure Database (ICSD, data release 2025.1; Zagorac et al., 2019 ▸) was used for the database search. Known structurally characterized phases in the ZnO–As2O5 system include the high- and low-temperature modifications of tetrazinc bis(arsenate(V)) oxide, Zn4(AsO4)2O (Frerichs et al., 1996a ▸), dimorphic trizinc orthoarsenate, Zn3(AsO4)2 (Frerichs et al., 1996b ▸), and the pyroarsenate Zn2As2O7 with three modifications existing at different temperatures, one of which is commensurately and one is incommensurately modulated (Weil & Stöger, 2010 ▸).
As already mentioned, Zn(AsO3)2 is isotypic with Zn(PO3)2, in its low-temperature modification (Averbuch-Pouchot et al., 1983 ▸). The high-temperature modification of Zn(PO3)2 can be obtained by quenching from the recrystallized melt and contains a similar polyphosphate chain but in contrast to the low-temperature modification with two unique zinc cations in tetrahedral coordination (Weil, 2004 ▸). According to the information on the system ZnO–As2O5 provided by Kasenov et al. (1996 ▸), there are no indications of a possible high-temperature form of Zn(AsO3)2. Other M(PO3)2 polyphosphates isotypic with low-temperature Zn(PO3)2 and Zn(AsO3)2 can only be prepared by using high pressure (∼80 kbar) and temperatures (∼1270 K) and are reported for M = Ni, Mg, Cu, Co, Fe, Mn, and Cd (Bagieu-Beucher et al., 1976 ▸).
Zn(AsO3)2 is the only arsenate phase with an M:AsV ratio of 1:2 where solely tetrahedral AsO4 units are present in the polymeric arsenate anion. Except for M = Ba with a catena-arsenate anion consisting of AsO4 tetrahedra and AsO6 octahedra (Weil, 2016 ▸), all other MAs2O6 phases crystallize in the PbSb2O6 type of structure (Hill, 1987 ▸) in the trigonal space group type P
1m. This structure type is also referred to as the rosiaite structure type after the mineral of this name (Basso et al., 1996 ▸) and is based on a hexagonal array of O atoms with the As atom octahedrally coordinated in form of honeycomb layers. This structure type is realized for M = Ni, Co, Mn (Nakua & Greedan, 1995 ▸), Cd (Weil, 2001 ▸), Hg (Weil, 2000 ▸), Pd (Orosel & Jansen, 2006 ▸), Ca, Pb (Losilla et al., 1995 ▸), and Sr. The strontium phase is dimorphic and as well as in a rosiaite-type structure also crystallizes in a hexagonal superstructure with a doubled unit cell (Weil et al., 2009 ▸).
4. Synthesis and crystallization
Crystal growth procedures were carried out in sealed and evacuated silica ampoules using commercially available chemicals as received. A molar 1:1 mixture of ZnO (≥ 99%, Carl Roth GmbH) and As2O5 [99.9% (metals basis), abcr] was heated at 750 K for about 336 h. X-ray powder diffraction of the bulk product revealed Zn(AsO3OH)·H2O (mineral name koritnigite; Keller et al., 1980 ▸) and Zn(AsO3)2 as the main phases in an approximate ratio of 1:2. From this mixture, yellowish crystals of Zn(AsO3)2 were isolated for the single-crystal X-ray diffraction study. The presence of the hydrous phase Zn(AsO3OH)·H2O indicates that the hygroscopic starting material As2O5 was indeed not free of water.
5. Refinement
Crystal data, data collection and structure refinement details are summarized in Table 3 ▸. Atomic coordinates and labelling were adapted from the isotypic low-temperature phase of Zn(PO3)2 (Averbuch-Pouchot et al., 1983 ▸).
Table 3. Experimental details.
| Crystal data | |
| Chemical formula | [Zn(AsO3)2] |
| M r | 311.21 |
| Crystal system, space group | Monoclinic, C2/c |
| Temperature (K) | 300 |
| a, b, c (Å) | 10.1061 (10), 9.0308 (8), 5.2801 (5) |
| β (°) | 108.374 (7) |
| V (Å3) | 457.33 (8) |
| Z | 4 |
| Radiation type | Mo Kα |
| μ (mm−1) | 19.68 |
| Crystal size (mm) | 0.04 × 0.02 × 0.01 |
| Data collection | |
| Diffractometer | Stoe Stadivari |
| Absorption correction | Multi-scan (LANA; Koziskova et al., 2016 ▸) |
| Tmin, Tmax | 0.492, 0.654 |
| No. of measured, independent and observed [I > 2σ(I)] reflections | 3846, 797, 770 |
| R int | 0.017 |
| (sin θ/λ)max (Å−1) | 0.762 |
| Refinement | |
| R[F2 > 2σ(F2)], wR(F2), S | 0.010, 0.028, 1.13 |
| No. of reflections | 797 |
| No. of parameters | 43 |
| Δρmax, Δρmin (e Å−3) | 0.40, −0.37 |
Supplementary Material
Crystal structure: contains datablock(s) I. DOI: 10.1107/S2056989026009308/hb8254sup1.cif
Structure factors: contains datablock(s) I. DOI: 10.1107/S2056989026009308/hb8254Isup2.hkl
CCDC reference: 2585628
Additional supporting information: crystallographic information; 3D view; checkCIF report
Acknowledgments
TU Wien Bibliothek is acknowledged for financial support through its Open Access Funding Program.
supplementary crystallographic information
catena-Poly[zinc-di-µ-arsenato(V)-κ4O:O] . Crystal data
| [Zn(AsO3)2] | F(000) = 576 |
| Mr = 311.21 | Dx = 4.520 Mg m−3 |
| Monoclinic, C2/c | Mo Kα radiation, λ = 0.71073 Å |
| a = 10.1061 (10) Å | Cell parameters from 5088 reflections |
| b = 9.0308 (8) Å | θ = 3.1–32.8° |
| c = 5.2801 (5) Å | µ = 19.68 mm−1 |
| β = 108.374 (7)° | T = 300 K |
| V = 457.33 (8) Å3 | Shard, yellow |
| Z = 4 | 0.04 × 0.02 × 0.01 mm |
catena-Poly[zinc-di-µ-arsenato(V)-κ4O:O] . Data collection
| Stoe Stadivari diffractometer | 797 independent reflections |
| Radiation source: Axo_Mo | 770 reflections with I > 2σ(I) |
| Graded multilayer mirror monochromator | Rint = 0.017 |
| Detector resolution: 13.33 pixels mm-1 | θmax = 32.8°, θmin = 3.1° |
| rotation method, ω scans | h = −14→15 |
| Absorption correction: multi-scan (LANA; Koziskova et al., 2016) | k = −12→13 |
| Tmin = 0.492, Tmax = 0.654 | l = −7→4 |
| 3846 measured reflections |
catena-Poly[zinc-di-µ-arsenato(V)-κ4O:O] . Refinement
| Refinement on F2 | Primary atom site location: isomorphous structure methods |
| Least-squares matrix: full | w = 1/[σ2(Fo2) + (0.0127P)2 + 0.509P] where P = (Fo2 + 2Fc2)/3 |
| R[F2 > 2σ(F2)] = 0.010 | (Δ/σ)max = 0.001 |
| wR(F2) = 0.028 | Δρmax = 0.40 e Å−3 |
| S = 1.13 | Δρmin = −0.37 e Å−3 |
| 797 reflections | Extinction correction: SHELXL (Sheldrick, 2015), Fc*=kFc[1+0.001xFc2λ3/sin(2θ)]-1/4 |
| 43 parameters | Extinction coefficient: 0.0035 (2) |
| 0 restraints |
catena-Poly[zinc-di-µ-arsenato(V)-κ4O:O] . Special details
| Geometry. All esds (except the esd in the dihedral angle between two l.s. planes) are estimated using the full covariance matrix. The cell esds are taken into account individually in the estimation of esds in distances, angles and torsion angles; correlations between esds in cell parameters are only used when they are defined by crystal symmetry. An approximate (isotropic) treatment of cell esds is used for estimating esds involving l.s. planes. |
catena-Poly[zinc-di-µ-arsenato(V)-κ4O:O] . Fractional atomic coordinates and isotropic or equivalent isotropic displacement parameters (Å2)
| x | y | z | Uiso*/Ueq | ||
| Zn1 | 0.000000 | 0.10801 (2) | 0.250000 | 0.00841 (6) | |
| As1 | 0.21468 (2) | 0.40539 (2) | 0.24523 (3) | 0.00640 (5) | |
| O1 | 0.36157 (10) | −0.00460 (12) | 0.04492 (19) | 0.0121 (2) | |
| O2 | 0.38566 (10) | 0.42724 (11) | 0.35206 (19) | 0.00870 (17) | |
| O3 | 0.15428 (11) | 0.23634 (11) | 0.1990 (2) | 0.0132 (2) |
catena-Poly[zinc-di-µ-arsenato(V)-κ4O:O] . Atomic displacement parameters (Å2)
| U11 | U22 | U33 | U12 | U13 | U23 | |
| Zn1 | 0.00662 (11) | 0.00985 (11) | 0.00828 (10) | 0.000 | 0.00168 (8) | 0.000 |
| As1 | 0.00579 (7) | 0.00774 (8) | 0.00560 (7) | −0.00148 (4) | 0.00169 (5) | −0.00034 (4) |
| O1 | 0.0078 (4) | 0.0209 (5) | 0.0074 (4) | 0.0001 (4) | 0.0021 (3) | 0.0056 (4) |
| O2 | 0.0057 (4) | 0.0118 (4) | 0.0077 (4) | −0.0008 (3) | 0.0008 (3) | 0.0008 (3) |
| O3 | 0.0139 (5) | 0.0094 (4) | 0.0172 (5) | −0.0052 (4) | 0.0061 (4) | −0.0020 (4) |
catena-Poly[zinc-di-µ-arsenato(V)-κ4O:O] . Geometric parameters (Å, º)
| Zn1—O3 | 2.0276 (10) | Zn1—O2v | 2.1640 (10) |
| Zn1—O3i | 2.0276 (10) | As1—O3 | 1.6336 (10) |
| Zn1—O2ii | 2.0786 (10) | As1—O2 | 1.6518 (10) |
| Zn1—O2iii | 2.0786 (10) | As1—O1vi | 1.7319 (10) |
| Zn1—O2iv | 2.1640 (10) | As1—O1vii | 1.7379 (10) |
| O3—Zn1—O3i | 110.28 (6) | O2iii—Zn1—O2v | 88.05 (3) |
| O3—Zn1—O2ii | 99.15 (4) | O2iv—Zn1—O2v | 82.06 (5) |
| O3i—Zn1—O2ii | 90.92 (4) | O3—As1—O2 | 117.65 (5) |
| O3—Zn1—O2iii | 90.92 (4) | O3—As1—O1vi | 108.08 (5) |
| O3i—Zn1—O2iii | 99.15 (4) | O2—As1—O1vi | 111.48 (5) |
| O2ii—Zn1—O2iii | 162.38 (6) | O3—As1—O1vii | 108.20 (5) |
| O3—Zn1—O2iv | 163.24 (4) | O2—As1—O1vii | 110.65 (5) |
| O3i—Zn1—O2iv | 84.54 (4) | O1vi—As1—O1vii | 99.15 (3) |
| O2ii—Zn1—O2iv | 88.05 (3) | As1vi—O1—As1v | 130.01 (6) |
| O2iii—Zn1—O2iv | 78.64 (4) | As1—O2—Zn1iii | 121.02 (5) |
| O3—Zn1—O2v | 84.54 (4) | As1—O2—Zn1viii | 126.04 (5) |
| O3i—Zn1—O2v | 163.24 (4) | Zn1iii—O2—Zn1viii | 101.35 (4) |
| O2ii—Zn1—O2v | 78.64 (4) | As1—O3—Zn1 | 141.36 (6) |
Symmetry codes: (i) −x, y, −z+1/2; (ii) x−1/2, −y+1/2, z−1/2; (iii) −x+1/2, −y+1/2, −z+1; (iv) x−1/2, y−1/2, z; (v) −x+1/2, y−1/2, −z+1/2; (vi) −x+1/2, −y+1/2, −z; (vii) −x+1/2, y+1/2, −z+1/2; (viii) x+1/2, y+1/2, z.
References
- Aroyo, M. I., Perez-Mato, J. M., Capillas, C., Kroumova, E., Ivantchev, S., Madariaga, G., Kirov, A. & Wondratschek, H. (2006). Z. Kristallogr.221, 15–27.
- Averbuch-Pouchot, M. T., Durif, A. & Bagieu-Beucher, M. (1983). Acta Cryst. C39, 25–26.
- Bagieu-Beucher, M., Gondrand, M. & Perroux, M. (1976). J. Solid State Chem.19, 353–357.
- Basso, R., Lucchetti, G., Zefiro, L. & Palenzona, A. (1996). Eur. J. Mineral.8, 487–492.
- Brown, I. D. (2002). The Chemical Bond in Inorganic Chemistry: The Bond Valence Model. Oxford University Press.
- Brown, I. D. (2009). Chem. Rev.109, 6858–6919. [DOI] [PMC free article] [PubMed]
- Dolomanov, O. V., Bourhis, L. J., Gildea, R. J., Howard, J. A. K. & Puschmann, H. (2009). J. Appl. Cryst.42, 339–341.
- Dowty, E. (2006). ATOMS. Shape Software, Kingsport, Tennessee, USA.
- Durif, A. (1995). Crystal Chemistry of Condensed Phosphates pp. 167–168 New York and London: Plenum Press.
- Flor, G. de la, Orobengoa, D., Tasci, E., Perez-Mato, J. M. & Aroyo, M. I. (2016). J. Appl. Cryst.49, 653–664.
- Folkers-Karlsson, L. C., Celani, P., Hahn, F. & Richter, J. (2026). Z. Kristallogr.241, 41–51.
- Frerichs, D., Park, C. H. & Müller-Buschbaum, Hk. (1996a). Z. Naturforsch. Teil B51, 233–239.
- Frerichs, D., Park, C. H. & Müller-Buschbaum, Hk. (1996b). Z. Naturforsch. Teil B51, 333–337.
- Gagné, O. C. & Hawthorne, F. C. (2018). Acta Cryst. B74, 63–78.
- Gagné, O. C. & Hawthorne, F. C. (2020). IUCrJ7, 581–629. [DOI] [PMC free article] [PubMed]
- Gake, T., Hirai, D. & Hirose, S. (2025). Phys. Rev. Mater.9, 113803.
- Griesemer, S. D., Baldassarri, B., Zhu, R., Shen, J., Pal, K., Park, C. W. & Wolverton, C. (2025). Sci. Adv.11, eadq1431. [DOI] [PMC free article] [PubMed]
- Hill, R. J. (1987). J. Solid State Chem.71, 12–18.
- Ilinca, G. (2022). Minerals12, 924.
- Kasenov, B. K., Mustafin, E. S. & Sarkulov, Zh. Kh. (1996). Russ. J. Inorg. Chem.41, 839–840.
- Keller, P., Hess, H. & Riffel, H. (1980). Neues Jahrb. Mineral. Abh.138, 316–332.
- Koziskova, J., Hahn, F., Richter, J. & Kožíšek, J. (2016). Acta Chim. Slovaca9, 136–140.
- Losilla, E. R., Aranda, M. A. G., Ramirez, F. J. & Bruque, S. (1995). J. Phys. Chem.99, 12975–12979.
- Mustafin, E. S. & Kasenov, B. K. (1994). Russ. J. Inorg. Chem.39, 716.
- Mustafin, E. S. & Kasenov, B. K. (1996). J. Eng. Phys. Thermophys.68, 529–531.
- Nakua, A. M. & Greedan, J. E. (1995). J. Solid State Chem.118, 402–411.
- Orosel, D. & Jansen, M. (2006). Z. Anorg. Allg. Chem.632, 1131–1133.
- Salinas-Sanchez, A., Garcia-Muñoz, J. L., Rodriguez-Carvajal, J., Saez-Puche, R. & Martinez, J. L. (1992). J. Solid State Chem.100, 201–211.
- Sheldrick, G. M. (2015). Acta Cryst. C71, 3–8.
- Weil, M. (2000). Z. Naturforsch. Teil B55, 699–706.
- Weil, M. (2001). Acta Cryst. E57, i22–i23.
- Weil, M. (2004). Acta Cryst. C60, i20–i22. [DOI] [PubMed]
- Weil, M. (2016). Cryst. Growth Des.16, 908–921. [DOI] [PMC free article] [PubMed]
- Weil, M., Đorđević, T., Lengauer, C. L. & Kolitsch, U. (2009). Solid State Sci.11, 2111–2117.
- Weil, M. & Stöger, B. (2010). Acta Cryst. B66, 603–614. [DOI] [PubMed]
- Westrip, S. P. (2010). J. Appl. Cryst.43, 920–925.
- Zagorac, D., Müller, H., Ruehl, S., Zagorac, J. & Rehme, S. (2019). J. Appl. Cryst.52, 918–925. [DOI] [PMC free article] [PubMed]
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.
Supplementary Materials
Crystal structure: contains datablock(s) I. DOI: 10.1107/S2056989026009308/hb8254sup1.cif
Structure factors: contains datablock(s) I. DOI: 10.1107/S2056989026009308/hb8254Isup2.hkl
CCDC reference: 2585628
Additional supporting information: crystallographic information; 3D view; checkCIF report
