Abstract
Six new ruthenium(II) polypyridyl complexes incorporating pyridinyl, quinolinyl, or isoquinolinyl-benzimidazole ligands were synthesized to investigate the influence of π-conjugated mono- and bis-chelating ligands on their photophysical and electrochemical properties, and compared to the frontrunner [Ru(bpy)3](PF6)2. Their evaluation reveals that ligand π-extension modulates the ILCT and MLCT transitions, leading to red-shifted absorption and tunable excited-state redox potentials. The mononuclear complexes were further evaluated as visible-light photocatalysts through reactive oxygen species (ROS) generation and a model α-arylation reaction. These findings demonstrate that benzimidazole-based ligand engineering provides an effective strategy to tune the excited-state properties and photocatalytic behavior of ruthenium complexes.
Keywords: energy transfer, photoredox catalysis, ruthenium polypyridyl complexes, single electron transfer
Introduction
Among photoactivated metal complexes, ruthenium polypyridyl complexes represent a major and versatile family of coordination compounds [1–3]. These complexes are appreciated for their rich photophysical and electrochemical properties [4–6]. One of the many reasons for their high interest lies in their photophysical behavior [7–8]. Ruthenium polypyridyl complexes exhibit absorption bands in the UV–visible region with high molar extinction coefficients, mainly attributed to metal-to-ligand charge transfer (MLCT) transitions. The corresponding excited states possess relatively long lifetimes and emit high phosphorescence at room temperature. Importantly, these properties can be modulated by ligand modification, allowing fine control over absorption and emission wavelength, lifetime, and quantum yield [1–3]. In addition to their high chemical stability and accessible redox potentials (oxidative/reductive quenching and energy transfer), these features make them robust systems in many domains [4,9–12].
Ruthenium polypyridyl complexes are investigated in biomedicine as photosensitizers in photodynamic therapy (PDT), where the excitation of ruthenium complexes allows the production of reactive oxygen species, leading to cytotoxic effects [13]. Their easy modular structure via ligand modification further allows the incorporation of targeting carriers or functional groups, improving their solubility, expanding their potential as therapeutic and diagnostic tools [14]. Beyond biology, these complexes play a key role in photoredox catalysis and in materials science with solar energy conversion, due to their favorable redox behavior and photostability [10,15–18].
Among ruthenium polypyridyl complexes, [Ru(bpy)3](PF6)2 is the frontrunner and exhibits a strong MLCT absorption at ≈450 nm and emits at ≈620 nm with an excited-state lifetime of ≈600 ns. In its excited state, [Ru(bpy)3]2+* exhibits an estimated oxidation potential of approximately −1.31 V vs Fc/Fc+ and a reduction potential around +0.41 V vs Fc/Fc+, enabling it to act as both a good photo-reductant and photo-oxidant (Figure 1) [19–20].
Figure 1.

Structures of [Ru(bpy)3](PF6)2 as a widely used versatile photocatalyst and the complexes evaluated in this study.
Due to their modular ligand structure, particular attention has been paid to systems with π-conjugated, electron-accepting ligands containing a benzimidazole unit, such as pyridinyl-benzimidazole [21–22], quinolinyl-benzimidazole [13,23–24], pyridyl-benzobisimidazole [25–26], pyridyl-quinonebisimidazole [27–28] pyrenyl-bisimidazole [29], and related derivatives [30–31]. However, the optical and electronic properties of systems based on quinolinyl/pyridinyl-imidazole and symmetric bisimidazole ligands remain largely unexplored (Figure 1).
The first studies on complexes coordinated with pyridyl-benzimidazole ligands, described by Haga and Tanaka in 1979 [32], showed that these ligands, L, had an excellent ability to chelate and form [Ru(bpy)2L]2+ complexes. Furthermore, their studies demonstrated that the donor nature of these ligands had a strong impact on the redox potential, as well as on the metal-ligand charge transfer (MLCT) bands responsible for the optical properties of Ru(II) polypyridyl complexes [22,32–33].
In recent years, several studies have explored complexes containing pyridyl-benzazole as a third ligand, including pyridyl-benzimidazole ligands, which have demonstrated their usefulness in various applications such as catalysis [24,34–36], cancer phototherapy [37–46] and photochemistry [44,47–49]. However, only two examples exist in the literature exploring [Ru(bpy)2L]2+ complexes where L corresponds to pyridyl-benzimidazole and quinolinyl-benzymidazole in such applications [24,44].
Following on from mono-chelating ligands, bis-chelating ligands such as 2,6-bis(benzimidazol-2-yl)pyridine and its derivatives have been widely used for the synthesis of bis-nuclear ruthenium(II) complexes with tunable photophysical and electrochemical properties [27–28,50–54]. These complexes often exhibit greater intensity and red shift of the MLCT absorption bands as well as the corresponding emission band [54–58]. Other studies have also shown that these benzobisimidazole ligands exhibit interesting electronic properties that can be adjusted by modifying the ligand's π system, in particular by introducing substituents that extend electronic conjugation and modify the energy levels of orbitals involved in MLCT transitions [59], such as quinoline or isoquinoline. Although polypyridyl systems have been extensively studied, ligands based on a benzodiimidazole structure chelated with two ruthenium(II) metals remain relatively unexplored in the literature [50–54,60–61]. Furthermore, the electronic and optical properties of quinolinyl and isoquinolinyl analogues have not yet been studied to date.
Imidazole derivatives incorporated into heavy metal complexes (such as Ir(III)) have been studied for their luminescent properties, particularly in OLED devices [62–64]. Varying the substituents on the imidazole or combining it with π-conjugated ligands can modulate the emission color, excited state lifetime, and quantum efficiency. However, very few studies specifically cover symmetrical bisimidazole ligands or quinolinyl/pyridinyl-imidazole combinations with lighter transition metals such as ruthenium, leaving a gap in our understanding of the fundamental properties of these structures. This represents a significant opportunity for investigation to understand the influence of electronic transitions (π–π*, n–π*, CT) and the potential applications of such complexes in photocatalysis.
Indeed, quinolinyl/pyridinyl-imidazole and symmetric bisimidazole ligands are of interest in the design of new metal complexes due to the combination of a strong N-centered chelating ability with extended π-conjugation and tunable electronic properties [54,65–66]. On one hand, the imidazole/benzimidazole core provides a solid coordination site that can stabilize the metal oxidation states, and on the other hand the quinolinyl or pyridinyl substituents act as electron-donating or electron-withdrawing units, enabling the modification of the redox potential and frontier orbital energies. The π-conjugated framework is likely to improve light absorption and facilitate charge transfer, or MLCT (metal-to-ligand charge transfer) lifetimes. In the case of symmetric bisimidazoles, the possibility of chelating two ruthenium metal centers offers the possibility of cooperative or synergistic properties. Indeed, when bridging two metals, such ligands can promote electronic communication between the two metal centers, leading to effects on redox processes [67], as they can display broadened or shifted absorption profiles, or modification of redox potentials compared to their mononuclear analogues [68]. The ability to tune the distance between the two metal sites has also been utilized to mimic metalloenzyme active sites, design catalysts with multi-electron reactivity, or create artificial photosynthetic systems capable of charge separation and long-lived excited states [69]. Due to these structural features, quinolinyl/pyridinyl-imidazole and bisimidazole ligands are valuable ligands for the development of new ruthenium complexes with fine-tuned functionalities for diverse applications such as photocatalysis. It is indeed of interest to examine how such π-conjugated quinolinyl and pyridinyl-imidazole or bisimidazole ligands, when coordinated to one or two ruthenium centers, influence the electronic structure and photoluminescent behavior of the resulting complexes [70].
In this work, we report on the design and synthesis of six new ruthenium complexes obtained using 2-(pyridin-2-yl)-1H-benzo[d]imidazole, 2-(1H-benzo[d]imidazol-2-yl)quinoline, and 1-(1H-benzo[d]imidazol-2-yl)isoquinoline ligands. Depending on their architecture, these ligands enable the formation of either mononuclear or dinuclear (bis-chelated) ruthenium complexes Ru1–3 and Ru4–6, respectively, providing a platform to systematically investigate the influence of ligand structure on the optical and electronic properties of the resulting assemblies (Scheme 1).
Scheme 1.

Schematic representation of (a) L1–6, (b) Ru1, Ru2, Ru3 mono-ruthenium, and (c) Ru4, Ru5, and Ru6 bis-ruthenium complexes. M = [Ru(bpy)2]2+·2PF6−.
A series of analyses, i.e, cyclic voltammetry, UV–visible absorption spectroscopy, and photoluminescence measurements, was applied to evaluate their optical and electronic behavior. Beyond fundamental insights, these new complexes will also be explored as photosensitizers for photocatalytic transformations, via energy transfer and electron-transfer processes.
Results and Discussion
To evaluate the potential of new pyridyl-benzimidazole based ruthenium(II) complexes, we have focused our efforts on 2-(pyridin-2-yl)-1H-benzo[d]imidazole (L1), 2-(1H-benzo[d]imidazol-2-yl)quinoline (L2), and 1-(1H-benzo[d]imidazol-2-yl)isoquinoline (L3) for the design of new mono-chelated ruthenium complexes, to evaluate the influence of such ligands in the optical and electronical properties of the complexes [71–72].
The synthesis of ligands was performed, followed by a cyclizing condensation reaction, under strongly dehydrating conditions, between a diamine and an aromatic carboxylic acid derivative, providing access to two distinct families of benzo-imidazole ligands via two reaction pathways (pathways A and B, Scheme 2). The starting amino compounds, picolinic acid (for L1 and L4), quinaldic acid (for L2 and L5), and isoquinoline-1-carboxylic acid (for L3 and L6) corresponding to the desired ligands were subjected to cyclization conditions in the presence of polyphosphoric acid (PPA) at 170 °C for 5 hours to promote both the activation and condensation of the carboxylic acid on the amine to form the corresponding nitrogen-containing cyclic products. To obtain the benzimidazole ligands L1 to L3, the reaction was carried out between the corresponding carboxylic acid and 1,2-benzenediamine hydrochloride according to reaction pathway A (Scheme 2).
Scheme 2.

Synthesis of monoruthenium (Ru1, Ru2, Ru3) and bisruthenium (Ru4, Ru5, Ru6) complexes from the pyridinyl/quinolinyl-benzimidazole (L1, L2, L3) or bisimidazole ligands (L4, L5, L6). EE = 2-ethoxyethanol.
The ligands thus obtained were isolated with yields of 24%, 83%, and 73%, respectively. In the case of the benzobisimidazole ligands, L4 to L6, they were obtained under the same conditions as above, according to reaction pathway B. Thus, condensation was carried out between the corresponding carboxylic acid and 1,2,4,5-tetraaminobenzene tetrahydrochloride to obtain the isolated benzobisimidazole ligands with quantitative yields for L4 and L5 versus 40% for L6. The increase in structural rigidity and steric hindrance caused by the para substituent could explain this low yield.
The synthesis of mono (Ru1–3) and bis-chelated (Ru4–6) complexes was performed by a coordination reaction of ligands and 1 or 2 equivalents of the dichlororuthenium dibipyridine complex following pathway A for L1–3, and pathway B for L4–6. All reactions were performed in 2-ethoxyethanol (EE) using a microwave process. Subsequently, the complexes are directly isolated following a salt metathesis reaction involving the exchange of the chloride salt by the PF6 counterion (Scheme 2).
With these complexes in hand, we have evaluated their optical properties and performed the absorption and emission spectra of the whole series.
Optical properties: The absorption and emission spectra of complexes Ru1–6, together with the associated photophysical data, recorded at 100 μM in CH₃CN at 25 °C, are presented in Figure 2 and Table 1. All six complexes display absorption features characteristic for ruthenium polypyridyl systems. In general, the spectra exhibit an intense band between 270 and 300 nm, attributed to the π→π* intraligand transition of the bipyridine moiety, corresponding to an interligand charge transfer (ILCT) transition. A second broad absorption band is observed between 385 and 650 nm, with distinct maxima at 462, 483, 492, 504, and 508 nm, assigned to MLCT transitions from the Ru d orbitals to the ligand π* orbitals (Figure 2a–d). Compared to the well-studied [Ru(bpy)3]2+ complex, the MLCT band of Ru1–6 is broader, a difference that can be explained by the presence of two overlapping excited states, Ru→bpy* and Ru→L*. In addition, a third absorption band, characteristic of ILCT transitions within the quinolinyl- and pyridinyl-imidazole ligands, is detected between 300 and 430 nm for the mononuclear complexes Ru1–3 and the dinuclear complex Ru4, and between 375 and 450 nm for the dinuclear complexes Ru5 and Ru6 (Figure 2a–d).
Figure 2.

Normalized (a) absorbance and (b) emission spectra excited at λmax (MLCT Ru → L*) at 100 µM in CH3CN at room temperature of Ru1 (drak blue line), Ru2 (blue line), Ru3 (light blue line); (c) absorbance and (d) emission spectra excited at λmax (MLCT Ru → L*) at 100 µM in CH3CN at room temperature of Ru4 (dark purple line), Ru5 (purple line), and Ru6 (light purple line) complexes.
Table 1.
Photopysical data for Ru1–6.a
| complexes | λ MLCT (nm) (ε in 10−3 M−1·cm−1) |
λ emissionb (nm) |
Δ Stokes (nm) |
Φc (%) |
E00 (eV) |
|
| |||||
| Ru1 | 446 (11.48), 491 (12.60)d | 749 | 121, 260d | 0.95 | 2.36 |
| Ru2 | 457 (12.84), 483 (13.64)d | 762 | 279d | 0.55 | 2.00 |
| Ru3 | 462 (11.30), 484 (11.68)d | 719 | 145, 245d | 0.22 | 2.32 |
| Ru4 | 462 (13.80)d | 676 | 214d | 0.57 | 2.14 |
| Ru5 | 504 (8.30)d | 764 | 258d | 0.38 | 2.11 |
| Ru6 | 508 (18.10)d | 803 | 273, 294d | 0.17 | 2.02 |
aAll measurements were performed at 50 μM for Ru1–6 in CH3CN at 293 K; bvalues with λ excitation = 450 nm (absorption wavelength; cΦ quantum yield was calculated according to the equation, using [Ru(bpy)3]2+ (Φ = 1.8%) as the standard [73]; dvalues corresponding at λmax of MLCT.
For the mono-chelated complexes Ru1–3, the ILCT absorption band undergoes a progressive red shift from 340 nm in Ru1 to 388 and 390 nm in Ru2 and Ru3, respectively. A slight bathochromic shift is also observed in the MLCT Ru→bpy* band, with maxima at 446 nm (Ru1), 457 nm (Ru2), and 462 nm (Ru3) (Figure 2a and Figure 2b). This effect is attributed to differences in the aromatic extension of the π-conjugated systems in the quinolinyl- versus pyridinyl-imidazole ligands. Moreover, the withdrawal of electron density from the third ligand away from the metal center contributes to a decrease in the Ru→bpy* MLCT transition energy. In parallel, a small hypsochromic shift is observed for the Ru→L* MLCT band, with maxima at 491 nm (Ru1), 483 nm (Ru2), and 484 nm (Ru3), further supporting the role of ligand electronic density in modulating MLCT transitions (Figure 2a, Figure 2b, and Table 1).
In the dinuclear complexes Ru4–6, the bathochromic shift of the ILCT band is more pronounced. The ILCT maximum shifts from 340 nm in Ru1 to 379 nm in Ru4 (Δ = 39 nm), and up to 432 nm in Ru6 (Δ = 92 nm compared to Ru1, and Δ = 42 nm compared to its mononuclear analogue Ru3) (Table 1). This trend reflects the extension of the π-conjugated framework in the bisimidazole ligands, which induces a significant red shift of the ILCT transition. In contrast, the red shift of the MLCT bands in the dinuclear complexes relative to their mononuclear counterparts is modest. For instance, the MLCT maximum at 483 nm in Ru2 shifts to 504 nm in Ru5 (Δ = 21 nm), while the 484 nm band in Ru3 shifts to 508 nm in Ru6 (Δ = 24 nm). Thus, coordination of a quinolinyl-imidazole ligand to two [Ru(bpy)2]2+ units does not induce a major red shift of the Ru→L* MLCT transition (Table 1). Furthermore, the bis-coordination of quinolinyl-bisimidazole in Ru5 and Ru6 appears to result in overlap between the ILCT band of the bisimidazole ligand and the Ru→bpy* MLCT band, likely due to the energetic proximity of these two transitions, which merge into a broad envelope spanning 375–470 nm.
Interestingly, in Ru4 the Ru→L* MLCT band undergoes a significant hypsochromic shift from 492 nm (Ru1) to 462 nm, accompanied by band sharpening. This feature suggests closer energetic alignment of the Ru→bpy* and Ru→L* MLCT states. The resulting increase in the Ru→L* transition energy points to an electronic environment around the ruthenium centers in Ru4 that is highly similar to that provided by the bipyridine ligands. Overall, these results indicate that the number of coordinated ruthenium units is not the primary determinant of MLCT red shifts in these systems. Instead, the effect arises from a combination of the close spatial proximity of the two ruthenium centers and the localized electron density of the bis-coordinated ligands, which generate an electronic environment comparable to that of the bipyridine ligands, as exemplified by Ru4.
Fluorescence spectra of the mononuclear (Ru1–3) and dinuclear (Ru4–6) complexes were recorded at different excitation wavelengths (Figure 2), revealing diverse emission profiles. When excited at the maximum absorption wavelength of the Ru→L* MLCT transition, the complexes exhibit two principal emission bands: one of moderate intensity in the 550–650 nm range (Ru1, Ru3, and Ru5) and a broader, more intense band between 650 and 900 nm (Ru1–6).
In particular, Ru1 and Ru3 display sharp emission maxima at 580 and 613 nm, respectively. These narrow bands are attributed to radiative relaxation from the triplet 3MLCT Ru→bpy* state to the ground state (S0). In addition, all complexes show a second, broader emission band of higher intensity extending from 630 to 900 nm, with maxima at 676 nm (Ru4), 762 and 764 nm (Ru2 and Ru5), and 803 nm (Ru6) (Table 1). This feature is assigned to nonradiative relaxation from the 3MLCT Ru→L* excited state.
Overall, the varied emission profiles of Ru1–6 reveal the existence of closely spaced triplet states capable of mediating relaxation between multiple pathways. Both mononuclear and dinuclear complexes thus exhibit extended excited-state lifetimes, consistent with efficient electronic communication between the ruthenium centers and the π-conjugated quinolinyl- or pyridinyl-imidazole/bisimidazole ligands, ultimately leading to phosphorescent emission.
Electronic properties: The electronic properties of complexes Ru1–6 were evaluated by cyclic voltammetry analysis and compared to the frontrunner [Ru(bpy)3](PF6)2. The observed trend can be rationalized by considering the electronic properties of the substituted benzimidazole ligands and their influence on the MLCT excited state. The excited-state redox potential is related to the ground-state metal oxidation or reduction potentials and the zero–zero excitation energy E00 according to the Rehm–Weller relationship (Figure 3). The excited-state reduction potentials, E*red, and oxidation potentials, E*ox, of the three heteroleptic Ru(II) complexes Ru1–3, as well as the dinuclear complexes Ru4–6, were determined from the corresponding ground-state redox potentials and the zero–zero excitation energy, E00. For comparison, the benchmark complex [Ru(bpy)3](PF6)2 displays an excited-state reduction potential of approximately +0.41 V vs Fc/Fc+.
Figure 3.

All measurements were performed in 0.1 M n-Bu4NPF6/MeCN. The potential is reported as E1/2 versus Fc/Fc+. A) Graph of the cyclic voltammetry of Ru1–6; b) all measurements summarized in a table. The excited state redox potential (E*) of complexes was calculated based on the Rehm–Weller theory [74–75].
As such, both the metal-centered oxidation/reduction potentials and the energy of the MLCT transition determine the overall driving force for the excited state. Among these factors, variations in the ligand π* energy, which dominates E00 are typically most influential for polypyridyl-type complexes. The investigated complexes exhibit E*red values ranging from +0.15 to +0.51 V. Among the mononuclear complexes, Ru3 displays the most positive E*red value (+0.51 V), followed by Ru1 (+0.45 V), whereas Ru2 exhibits the lowest value (+0.19 V). Thus, Ru3 is the strongest excited-state oxidant within the series, although Ru1 and Ru3 complexes are stronger oxidants than the benchmark [Ru(bpy)3](PF6)2. The excited-state oxidation potentials, E*ox, show a complementary trend, ranging from −1.31 to −1.96 V. Among the mononuclear complexes, Ru3 exhibits the most negative value (−1.96 V), followed by Ru1 (−1.92 V) and Ru2 (−1.62 V). Consequently, Ru3 also possesses the strongest excited-state reducing power of the mononuclear series, whereas Ru2 is the weakest. These results demonstrate that modification of the ancillary ligand framework provides substantial control over both the oxidative and reductive properties of the excited Ru(II) complexes. Indeed, in Ru1, the coordinating ligand contains a relatively small aromatic fragment (pyridine–benzimidazole), providing less extended π-conjugation and a higher-lying π* orbital compared with the quinoline- and isoquinoline-based analogues. This results in a higher-energy MLCT transition and a larger E00 (2.28 eV). Consequently, Ru1 displays a relatively positive E*red (+0.45 V) and a strongly negative E*ox (−1.92 V), indicating substantial excited-state oxidizing and reducing capabilities. In contrast, Ru2 incorporates a quinoline moiety, whose extended π-system stabilizes the ligand-centered π* orbital. This leads to a lower MLCT energy and a smaller E00 (2.00 eV), resulting in a less positive E*red (+0.19 V) and a less negative E*ox (−1.62 V). Accordingly, Ru2 is both the weakest excited-state oxidant and the weakest excited-state reductant among the three mononuclear complexes. The isoquinoline ligand in Ru3 provides a π-system comparable in size to that of quinoline but with a different orbital arrangement and conjugation pathway through the benzimidazole fragment. Ru3 exhibits the largest E00 of the mononuclear series (2.32 eV), together with the most positive E*red (+0.51 V) and the most negative E*ox (−1.96 V). Thus, Ru3 combines the strongest excited-state oxidizing and reducing powers within the mononuclear series.
For the bis-chelated complexes Ru4–Ru6, both E*red and E*ox are shifted toward less extreme values compared with their mononuclear analogues. In particular, E*red decreases from +0.45/+0.19/+0.51 V for Ru1–3 to +0.35/+0.24/+0.15 V for Ru4–6, while E*ox becomes substantially less negative, ranging from −1.31 to −1.53 V. This indicates that the dinuclear complexes possess both reduced excited-state oxidizing and reducing abilities relative to the mononuclear analogues. The observed changes can be rationalized, at least in part, by the lower E00 values associated with the red-shifted absorption and emission of the dinuclear complexes. Because E00 contributes positively to E*red but negatively to E*ox, a decrease of E00 necessarily shifts both excited-state potentials toward less extreme values, thereby reducing both the excited-state oxidizing and reducing power.
With all these elements in hand, the ligand-dependent modulation of the MLCT energy appears to be an important factor governing the excited-state redox properties. The potential of Ru1–3 will be evaluated and confirmed in photocatalyzed mediated transformations.
Generation of type I and type II ROS
Type I: The ROS generation capacity of type I was studied under irradiation at 457 nm for each complex in the presence of a photosensitizer, 2,7-dichlorodihydrofluorescein (DCFH). DCFH was selected for its ability to oxidize to green fluorescent DCF species, which significantly increases green fluorescence in this form. Each photo-transformation of DCFH to DCF was carried out in an H₂O/DMSO (99.5:0.5) solution containing 5 µM of DCFH and the complex under study (Figure 4) [76].
Figure 4.

Emission spectra at 550 nm obtained by the measurement of the fluorescence intensity resulting from the oxidation of DCFH to DCF corresponding to the ROS generation by (a) Ru1, (b) Ru2, and (c) Ru3. Each measurement was monitored under irradiation at 456 nm (40 W) of a solution containing 5 µM of DCFH and 5 µM of [Ru] in a mixture of H2O/DMSO (199:1, v/v).
As shown in the graph, the evolution of the signal correlated with ROS generation by electron transfer was monitored at 5-second intervals between each measurement for 60 seconds under irradiation of 457 nm at 40 W of power. Comparison of each complex with the control demonstrates the generation, to varying degrees, of ROS by a process of electron transfer (SET). The DCFH signal appears to decrease slightly to an I/I0 ratio of 3 after 60 seconds of irradiation. This is due to the natural auto-oxidation of DCFH to DCF. [Ru(bpy)3](PF6)2 shows linear and continuous growth up to a ratio of 6.7, which reflects a gradual and constant production of ROS. The Ru1 study shows a moderate increase at the beginning, followed by a more marked increase after 35 seconds of irradiation, reaching a ratio of approximately between 4.5 to 4.7 after 60 seconds of irradiation. Furthermore, ROS production remains lower than [Ru(bpy)3](PF6)2. In contrast, analysis of Ru2 and Ru3 shows a kinetically faster and more intense production of ROS from the very first seconds compared to [Ru(bpy)3](PF6)2. This indicates a more favorable electron transfer from these structures compared to [Ru(bpy)3](PF6)2. Nevertheless, the ROS progression of Ru2 seems to stabilize at a ratio of around 6 to 6.3. Ru3 appears to be the most effective at generating ROS through a SET mechanism. Indeed, the signal suddenly increases to a ratio of 7 after 15 seconds of irradiation, reaching a plateau between 8.5 and 9. Consequently, Ru3 appears to be the most promising photocatalyst in the series for ROS production via SET, with the highest kinetics and plateau in the series. This indicates a strong ability to transfer these electrons to a photosensitizer, as well as to produce ROS. These observations demonstrate a significant influence of the structure of the third ligand on the SET process for ROS generation. Furthermore, this seems to suggest a close correlation with the electron density around the ruthenium nucleus. A highly localized electron density around the nucleus would be unfavorable for a SET process. Thus, the Ru3 complex would be the most promising candidate for the emergence of applications involving a SET reaction process or strong ROS generation of type I.
Type II: The ability of Ru1, Ru2, and Ru3 to generate type II ROS through energy transfer (EnT) was also studied for each of these complexes in the presence of 1,5-dihydronaphthalene (DHN) under irradiation at 456 nm. DHN is a probe that absorbs between 260 and 350 nm and is sensitive to the presence of singlet oxygen, which produces an oxidized species, juglone, that absorbs at 420 nm (Figure 5) [77].
Figure 5.

Graph showing the total singlet O2 generation measured for each complex: Ru1, Ru2, and Ru3. Each measurement was monitored in a solution containing 310 µM of DHN and 31 µM of Ru in a mixture of MeOH/DCM (1:9, v/v), previously bubbled with O2, under irradiation at 456 nm.
Each photooxidation of DHN was carried out in a MeOH/DCM (1:9) solution, previously saturated by oxygen bubbling for 10 min, containing 310 µM of DHN and 31 µM of the complex under study. As shown in the graph (Figure 5), the generation of singlet oxygen 1O2 correlates with the growth of the absorption band corresponding to the appearance of juglone at 420 nm after a 5-second interval of irradiation by analysis for 60 seconds, according to the following Equation 1:
| [1] |
A = the absorbance intensity of the complex at 420 nm and A0 = the initial absorbance intensity of the complex at 420 nm.
Comparison of the curves corresponding to the experiments with and without complexes highlights the generation of singlet oxygen for all the complexes studied. Furthermore, the fact that in the experiment without complexes, growth begins after 35 to 40 seconds from 0.05 to reach 0.2 in juglone after 60 seconds of irradiation indicates that the complex plays an essential role in the generation of 1O2 following the photo-oxidation of DHN. In the case of [Ru(bpy)3](PF6)2, the curve appears to show low 1O2 production during the irradiation time (0.3 to 60 seconds). This indicates moderate efficiency of the complex for singlet oxygen generation under these conditions. On the other hand, Ru3 appears to be more effective than [Ru(bpy)3](PF6)2, increasing from a ratio of 0.3 to 0.7 after 60 seconds of irradiation (comparing [Ru(bpy)3](PF6)2 and Ru3, respectively), but remains significantly less effective than the Ru1 and Ru2 complexes. The curve for Ru2 shows a significant increase in 1O2 production, rising from 0.7 to 1.2 after 60 seconds of irradiation. The curve for Ru1 shows faster kinetics, reaching its highest value after 60 seconds of irradiation (2.1). Thus, Ru1 is the most efficient complex for generating 1O2 via a type II mechanism. This study demonstrated the variable efficiency of our complexes with an order of 1O2 generation capacity (Ru1 > Ru2 > Ru3 >> [Ru(bpy)3](PF6)2) via energy transfer, which reverses ROS production via electron transfer. Consequently, these results highlight that a third ligand structure with an extended electron density close to the nucleus is favorable for the development of structures that allow the emergence of EnT processes.
Application to reactions under SET mechanism: The study of complexes Ru1 to Ru3 demonstrated the effectiveness of the complexes in carrying out reactions based on a SET mechanism, with Ru3 showing greater effectiveness. The ability of the complexes to carry out photocatalyzed reactions via a SET mechanism was evaluated through an alpha-arylation reaction (Table 2).
Table 2.
Conditions of reactions catalyzed by complexes Ru1–3 under irradiation at 456 nm. The conversion was determined by LCMS analysis, using of an internal standard, biphenyl, at 0.1 M.
| |||
|
| |||
| entry | conditions | % iodide SMa | % global conversion |
|
| |||
| 1 | w/o catalyst | 100 | 0 |
| 2 | [Ru(bpy)3](PF6)2 | 11 | 89 |
| 3 | Ru1 | 71 | 29 |
| 4 | Ru1, w/o light | 100 | 0 |
| 5 | Ru2 | 76 | 24 |
| 6 | Ru2, w/o light | 100 | 0 |
| 7 | Ru3 | 14 | 86 |
| 8 | Ru3, w/o light | 100 | 0 |
aThe starting material is methyl 4-iodobenzoate ester. w/o corresponds to without. Global conversion refers to conversion in mono and di-functionalized ketone.
Alpha-arylation of ketones by photocatalysis is a reaction described in 2022 by Hossain under green light irradiation [78]. In 2024, this reaction was monitored in the presence of a photosensitizer irradiated under blue light [79]. The α-arylation of cyclohexanone with methyl 4-iodobenzoate ester was carried out at 0.1 M in the presence of 5 mol % of [Ru] catalysts under irradiation at 456 nm (Table 2). After 17.5 hours of irradiation, comparison of the experiments monitored under irradiation with the control and without irradiation confirms the ability of the complexes to carry out SET-photocatalyzed reactions. Furthermore, Ru3 achieved the best conversion rates of 22% and 64% in mono- and disubstituted products, respectively, under irradiation at 456 nm. This confirms the effectiveness of Ru3 vs Ru1 and Ru2 as a photocatalyst in reactions monitored by a SET mechanism.
Conclusion
In this paper, six new ruthenium polypyridyl complexes based on a third benzimidazole or benzobisimidazole ligand were successfully synthesized. The study of their optical and electronic properties revealed that the structural nature of these ligands significantly influences the MLCT-type excited states as well as the electronic delocalization within the complexes. In particular, the absorption and emission spectra highlighted the impact of the ligand structure on the photophysical properties of the systems studied. Furthermore, the introduction of bridging bisimidazole ligands allowed for a more detailed exploration of binuclear architectures and showed that ligands L4 to L6 strongly influence the luminescence and quantum yield of the corresponding complexes.
The study of type I and II reactive oxygen species (ROS) generation also highlighted the ability of complexes Ru1 to Ru3 to efficiently produce ROS. The results suggest that the electronic distribution within the complexes plays a decisive role in the mechanism involved in the generation of these species, either by energy transfer to oxygen leading to the formation of singlet oxygen (1O2), or by electron transfer to an acceptor molecule. In an EnT energy transfer mechanism, the Ru1 complex proved to be particularly effective in generating 1O2, while Ru3 appears to be the most promising candidate in SET mechanisms.
Supporting Information
General materials and methods, general synthesis procedures of ligands and complexes, a description of the optical and electrochemical characterization of ligands and complexes, reaction conditions for the ROS generation, as well as all analytical data related to the study.
Acknowledgments
All authors thank S. Lebrequier, T. D’Anfray and D. Buisson for the development of analytical methods and fruitful discussions. All authors also warmly thank the technical support of the SCBM.
Conflict of Interest
The authors describe no conflicts of interest.
Funding Statement
B.R.W. is grateful to Target ALS for his post-doctoral fellow funding.
Contributor Information
Jean-Christophe Cintrat, Email: jean-christophe.cintrat@cea.fr.
Eugénie Romero, Email: eugenie.romero@cea.fr.
Data Availability
All data that supports the findings of this study is available in the published article and/or the supporting information of this article.
References
- 1.Juris A, Balzani V, Barigelletti F, Campagna S, Belser P, von Zelewsky A. Coord Chem Rev. 1988;84:85–277. doi: 10.1016/0010-8545(88)80032-8. [DOI] [Google Scholar]
- 2.Kalyanasundaram K. Coord Chem Rev. 1982;46:159–244. doi: 10.1016/0010-8545(82)85003-0. [DOI] [Google Scholar]
- 3.Campagna S, Puntoriero F, Nastasi F, Bergamini G, Balzani V. Top Curr Chem. 2007;280:117–214. doi: 10.1007/128_2007_133. [DOI] [Google Scholar]
- 4.Ashford D L, Glasson C R K, Norris M R, Concepcion J J, Keinan S, Brennaman M K, Templeton J L, Meyer T J. Inorg Chem. 2014;53:5637–5646. doi: 10.1021/ic500408j. [DOI] [PubMed] [Google Scholar]
- 5.Xie P-H, Hou Y-J, Zhang B-W, Cia Y, Wu F, Tian W-J, Shen J-C. J Chem Soc, Dalton Trans. 1999;28:4217–4221. doi: 10.1039/a907621b. [DOI] [Google Scholar]
- 6.Abrahamsson M, Jäger M, Kumar R J, Österman T, Persson P, Becker H-C, Johansson O, Hammarström L. J Am Chem Soc. 2008;130:15533–15542. doi: 10.1021/ja804890k. [DOI] [PubMed] [Google Scholar]
- 7.Scattolini G, Rosichini A, Kaul N. Inorg Chem. 2025;64:23133–23148. doi: 10.1021/acs.inorgchem.5c03471. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 8.Balzani V, Juris A. Coord Chem Rev. 2001;211:97–115. doi: 10.1016/s0010-8545(00)00274-5. [DOI] [Google Scholar]
- 9.Chen L, Wang J, Cai X, Chen S, Zhang J, Li B, Chen W, Guo X, Luo H, Chen J. Bioorg Chem. 2022;119:105516. doi: 10.1016/j.bioorg.2021.105516. [DOI] [PubMed] [Google Scholar]
- 10.Prier C K, Rankic D A, MacMillan D W C. Chem Rev. 2013;113(7):5322–5363. doi: 10.1021/cr300503r. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 11.Ashford D L, Brennaman M K, Brown R J, Keinan S, Concepcion J J, Papanikolas J M, Templeton J L, Meyer T J. Inorg Chem. 2015;54:460–469. doi: 10.1021/ic501682k. [DOI] [PubMed] [Google Scholar]
- 12.Adeloye A O, Ajibade P A. Molecules. 2014;19(8):12421–12460. doi: 10.3390/molecules190812421. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 13.Poynton F E, Bright S A, Blasco S, Williams D C, Kelly J M, Gunnlaugsson T. Chem Soc Rev. 2017;46:7706–7756. doi: 10.1039/c7cs00680b. [DOI] [PubMed] [Google Scholar]
- 14.Martínez-Alonso M, Gasser G. Coord Chem Rev. 2021;434:213736. doi: 10.1016/j.ccr.2020.213736. [DOI] [Google Scholar]
- 15.Bourgois C, Troian-Gautier L, Kitzmann W R. Inorg Chem. 2026;65(14):7549–7577. doi: 10.1021/acs.inorgchem.6c00560. [DOI] [PubMed] [Google Scholar]
- 16.Chauhan A, Singh S, Singh A K, Singh A K, Kumar S, Yadav R K, Singh A P, Tripathi U N, Kumar M. Coord Chem Rev. 2025;525:216344. doi: 10.1016/j.ccr.2024.216344. [DOI] [Google Scholar]
- 17.Morozkov G V, Abel A S, Lyssenko K A, Roznyatovsky V A, Averin A D, Beletskaya I P, Bessmertnykh-Lemeune A. Dalton Trans. 2024;53:535–551. doi: 10.1039/d3dt02936k. [DOI] [PubMed] [Google Scholar]
- 18.Kumar S, Singh S, Kumar A, Murthy K S R, Kumar Singh A. Coord Chem Rev. 2022;452:214272. doi: 10.1016/j.ccr.2021.214272. [DOI] [Google Scholar]
- 19.Moll J, Wang C, Päpcke A, Förster C, Resch‐Genger U, Lochbrunner S, Heinze K. Chem – Eur J. 2020;26(30):6820–6832. doi: 10.1002/chem.202000871. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 20.Arias-Rotondo D M, McCusker J K. An Overview of the Physical and Photophysical Properties of [Ru(bpy)3]2+ In: Corey S, Yoon T, MacMillan D W D, editors. Visible Light Photocatalysis in Organic Chemistry. 1st ed. Weinheim, Germany: Wiley-VCH; 2018. pp. 1–24. [DOI] [Google Scholar]
- 21.Liu Q-D, Jia W-L, Wang S. Inorg Chem. 2005;44:1332–1343. doi: 10.1021/ic0487530. [DOI] [PubMed] [Google Scholar]
- 22.Yi H, Crayston J A, Irvine J T S. Dalton Trans. 2003:685–691. doi: 10.1039/b208289f. [DOI] [Google Scholar]
- 23.Ujan R, Mahmood H M K, Channar P A, Ejaz S A, Saeed S, Saeed A, Saeed A, Rafiq M, Channar K A, Indher H A B, et al. J Chem Sci. 2022;134(1):7. doi: 10.1007/s12039-021-01998-z. [DOI] [Google Scholar]
- 24.Paul L, Gu M, Moise S, Harrison D P, Norris M R. ACS Appl Energy Mater. 2022;5:9280–9285. doi: 10.1021/acsaem.2c01408. [DOI] [Google Scholar]
- 25.Bhattacharya A, Manivannan V. J Photochem Photobiol, A. 2023;444:114913. doi: 10.1016/j.jphotochem.2023.114913. [DOI] [Google Scholar]
- 26.Franco L R, Toledo K C F, Matias T A, Benavides P A, Cezar H M, Araujo C M, Coutinho K, Araki K. Phys Chem Chem Phys. 2022;24(17):10222–10240. doi: 10.1039/d1cp03912a. [DOI] [PubMed] [Google Scholar]
- 27.Dhara S, Ansari M A, Schwederski B, Filippou V, Kaim W, Lahiri G K. Dalton Trans. 2022;51(10):4058–4067. doi: 10.1039/d2dt00184e. [DOI] [PubMed] [Google Scholar]
- 28.Ansari M A, Beyer K, Schwederski B, Kaim W, Lahiri G K. Chem – Asian J. 2018;13(19):2947–2955. doi: 10.1002/asia.201801101. [DOI] [PubMed] [Google Scholar]
- 29.Mardanya S, Karmakar S, Bar M, Baitalik S. Dalton Trans. 2015;44:21053–21072. doi: 10.1039/c5dt03766b. [DOI] [PubMed] [Google Scholar]
- 30.Yeh A, Chen T-R. Mater Lett. 2005;59(23):2911–2914. doi: 10.1016/j.matlet.2005.04.042. [DOI] [Google Scholar]
- 31.Leroy-Lhez S, Fages F. C R Chim. 2005;8:1204–1212. doi: 10.1016/j.crci.2004.11.028. [DOI] [Google Scholar]
- 32.Haga M-a, Tanaka T. Chem Lett. 1979;8(7):863–864. doi: 10.1246/cl.1979.863. [DOI] [Google Scholar]
- 33.Azar Y T, Payami M. Phys Chem Chem Phys. 2015;17:29574–29585. doi: 10.1039/c5cp02947c. [DOI] [PubMed] [Google Scholar]
- 34.Dayan O, Demirmen S, Özdemir N. Polyhedron. 2015;85:926–932. doi: 10.1016/j.poly.2014.10.012. [DOI] [Google Scholar]
- 35.Dayan O, Tercan M, Özdemir N. J Mol Struct. 2016;1123:35–43. doi: 10.1016/j.molstruc.2016.06.017. [DOI] [Google Scholar]
- 36.Begum A, Pickup P G. Electrochem Commun. 2007;9:2525–2528. doi: 10.1016/j.elecom.2007.07.034. [DOI] [Google Scholar]
- 37.Martínez-Alonso M, Busto N, Jalón F A, Manzano B R, Leal J M, Rodríguez A M, García B, Espino G. Inorg Chem. 2014;53:11274–11288. doi: 10.1021/ic501865h. [DOI] [PubMed] [Google Scholar]
- 38.Zhang P, Wang Y, Qiu K, Zhao Z, Hu R, He C, Zhang Q, Chao H. Chem Commun. 2017;53:12341–12344. doi: 10.1039/c7cc07776a. [DOI] [PubMed] [Google Scholar]
- 39.Zhao Z, Hu R, Shi H, Wang Y, Ji L, Zhang P, Zhang Q. J Inorg Biochem. 2019;194:19–25. doi: 10.1016/j.jinorgbio.2019.02.002. [DOI] [PubMed] [Google Scholar]
- 40.Kumbhakar S, Gupta P, Giri B, Muley A, Karumban K S, Misra A, Maji S. J Mol Struct. 2022;1265:133419. doi: 10.1016/j.molstruc.2022.133419. [DOI] [Google Scholar]
- 41.Mansour A M, Shehab O R. Eur J Inorg Chem. 2017:4299–4310. doi: 10.1002/ejic.201700898. [DOI] [Google Scholar]
- 42.Mansour A M. Eur J Inorg Chem. 2018:852–860. doi: 10.1002/ejic.201701341. [DOI] [Google Scholar]
- 43.Omondi R O, Jaganyi D, Ojwach S O, Fatokun A A. Inorg Chim Acta. 2018;482:213–220. doi: 10.1016/j.ica.2018.06.020. [DOI] [Google Scholar]
- 44.Havrylyuk D, Heidary D K, Nease L, Parkin S, Glazer E C. Eur J Inorg Chem. 2017:1687–1694. doi: 10.1002/ejic.201601450. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 45.Shatskiy A, Bardin A A, Oschmann M, Matheu R, Benet‐Buchholz J, Eriksson L, Kärkäs M D, Johnston E V, Gimbert‐Suriñach C, Llobet A, et al. ChemSusChem. 2019;12(10):2251–2262. doi: 10.1002/cssc.201900097. [DOI] [PubMed] [Google Scholar]
- 46.Jabłońska-Wawrzycka A, Rogala P, Czerwonka G, Gałczyńska K, Drabik M, Dańczuk M. Int J Mol Sci. 2021;22:10113. doi: 10.3390/ijms221810113. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 47.Cape J L, Bowman M K, Kramer D M. J Am Chem Soc. 2005;127:4208–4215. doi: 10.1021/ja043955g. [DOI] [PubMed] [Google Scholar]
- 48.Ludlow M K, Soudackov A V, Hammes-Schiffer S. J Am Chem Soc. 2009;131:7094–7102. doi: 10.1021/ja9001184. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 49.Balzani V, Bergamini G, Campagna S, Puntoriero F. Top Curr Chem. 2007;280:1–36. doi: 10.1007/128_2007_132. [DOI] [Google Scholar]
- 50.Arakawa R, Matsuo T, Ito H, Katakuse I, Nozaki K, Ohno T, Haga M-A. Org Mass Spectrom. 1994;29(6):289–294. doi: 10.1002/oms.1210290605. [DOI] [Google Scholar]
- 51.Yoshimura A, Nozaki K, Ikeda N, Ohno T. J Phys Chem. 1996;100:1630–1637. doi: 10.1021/jp9513982. [DOI] [Google Scholar]
- 52.Yoshimura A, Nozaki K, Ikeda N, Ohno T. J Am Chem Soc. 1993;115:7521–7522. doi: 10.1021/ja00069a069. [DOI] [Google Scholar]
- 53.Ohno T, Nozaki K, Haga M. Inorg Chem. 1992;31:4256–4261. doi: 10.1021/ic00047a010. [DOI] [Google Scholar]
- 54.Mardanya S, Mondal D, Baitalik S. Dalton Trans. 2017;46:17010–17024. doi: 10.1039/c7dt03355a. [DOI] [PubMed] [Google Scholar]
- 55.Xun S, Zhang J, Li X, Ma D, Wang Z Y. Synth Met. 2008;158:484–488. doi: 10.1016/j.synthmet.2008.03.018. [DOI] [Google Scholar]
- 56.Cui C, Shi Y, Li J, Cheng T. Coord Chem Rev. 2024;516:215984. doi: 10.1016/j.ccr.2024.215984. [DOI] [Google Scholar]
- 57.Bhaumik C, Das S, Saha D, Dutta S, Baitalik S. Inorg Chem. 2010;49:5049–5062. doi: 10.1021/ic100138s. [DOI] [PubMed] [Google Scholar]
- 58.Prajith N U, Priyanka P V, Alexander V. J Biol Inorg Chem. 2022;27:357–372. doi: 10.1007/s00775-022-01934-7. [DOI] [PubMed] [Google Scholar]
- 59.Sauvage J P, Collin J P, Chambron J C, Guillerez S, Coudret C, Balzani V, Barigelletti F, De Cola L, Flamigni L. Chem Rev. 1994;94:993–1019. doi: 10.1021/cr00028a006. [DOI] [Google Scholar]
- 60.Benavides P A, Matias T A, Araki K. Dalton Trans. 2017;46:15567–15572. doi: 10.1039/c7dt03658b. [DOI] [PubMed] [Google Scholar]
- 61.Nozaki K, Ohno T, Haga M. J Phys Chem. 1992;96:10880–10888. doi: 10.1021/j100205a051. [DOI] [Google Scholar]
- 62.Ding L, Zang C-X, Wen L, Shan G-G, Gao Y, Sun H-Z, Xie W-F, Su Z-M. Organometallics. 2020;39(18):3384–3393. doi: 10.1021/acs.organomet.0c00472. [DOI] [Google Scholar]
- 63.Cao H-T, Ding L, Yu J, Shan G-G, Wang T, Sun H-Z, Gao Y, Xie W-F, Su Z-M. Dyes Pigm. 2019;160:119–127. doi: 10.1016/j.dyepig.2018.08.001. [DOI] [Google Scholar]
- 64.Shang X, Wan N, Han D, Zhang G. Photochem Photobiol Sci. 2014;13:574–582. doi: 10.1039/c3pp50394a. [DOI] [PubMed] [Google Scholar]
- 65.Pannwitz A, Prescimone A, Wenger O S. Eur J Inorg Chem. 2017:609–615. doi: 10.1002/ejic.201601403. [DOI] [Google Scholar]
- 66.Li Z-Z, Niu Y-L, Zhou H-Y, Chao H-Y, Ye B-H. Inorg Chem. 2013;52(17):10087–10095. doi: 10.1021/ic4014043. [DOI] [PubMed] [Google Scholar]
- 67.Hazari A S, Indra A, Lahiri G K. RSC Adv. 2018;8:28895–28908. doi: 10.1039/c8ra03206h. [DOI] [PMC free article] [PubMed] [Google Scholar]
- 68.Kreitner C, Heinze K. Dalton Trans. 2016;45:5640–5658. doi: 10.1039/c6dt00384b. [DOI] [PubMed] [Google Scholar]
- 69.Fukuzumi S, Ohkubo K, Suenobu T. Acc Chem Res. 2014;47:1455–1464. doi: 10.1021/ar400200u. [DOI] [PubMed] [Google Scholar]
- 70.Balzani V, Juris A, Venturi M, Campagna S, Serroni S. Chem Rev. 1996;96:759–834. doi: 10.1021/cr941154y. [DOI] [PubMed] [Google Scholar]
- 71.Vlček A A, Dodsworth E S, Pietro W J, Lever A B P. Inorg Chem. 1995;34:1906–1913. doi: 10.1021/ic00111a043. [DOI] [Google Scholar]
- 72.Gholamkhass B, Nozaki K, Ohno T. J Phys Chem B. 1997;101:9010–9021. doi: 10.1021/jp971240c. [DOI] [Google Scholar]
- 73.Rillema D P, Taghdiri D G, Jones D S, Worl L A, Meyer T J, Levy H A, Keller C D. Inorg Chem. 1987;26:578–585. doi: 10.1021/ic00251a018. [DOI] [Google Scholar]
- 74.Kim D, Teets T S. Chem Phys Rev. 2022;3:021302. doi: 10.1063/5.0084554. [DOI] [Google Scholar]
- 75.Farid S, Dinnocenzo J P, Merkel P B, Young R H, Shukla D, Guirado G. J Am Chem Soc. 2011;133:11580–11587. doi: 10.1021/ja2024367. [DOI] [PubMed] [Google Scholar]
- 76.Liu S, Wang B, Yu Y, Liu Y, Zhuang Z, Zhao Z, Feng G, Qin A, Tang B Z. ACS Nano. 2022;16:9130–9141. doi: 10.1021/acsnano.2c01206. [DOI] [PubMed] [Google Scholar]
- 77.Takizawa S-y, Aboshi R, Murata S. Photochem Photobiol Sci. 2011;10(6):895–903. doi: 10.1039/c0pp00265h. [DOI] [PubMed] [Google Scholar]
- 78.Hossain M M, Shaikh A C, Moutet J, Gianetti T L. Nat Synth. 2022;1:147–157. doi: 10.1038/s44160-021-00021-0. [DOI] [Google Scholar]
- 79.Mandal B, Mandal S, Halder S, Adhikari D. Chem Commun. 2024;60:5852–5855. doi: 10.1039/d4cc01287a. [DOI] [PubMed] [Google Scholar]
Associated Data
This section collects any data citations, data availability statements, or supplementary materials included in this article.
Supplementary Materials
General materials and methods, general synthesis procedures of ligands and complexes, a description of the optical and electrochemical characterization of ligands and complexes, reaction conditions for the ROS generation, as well as all analytical data related to the study.
Data Availability Statement
All data that supports the findings of this study is available in the published article and/or the supporting information of this article.
