Skip to main content
ChemistryOpen logoLink to ChemistryOpen
. 2026 Nov 12;15(11):e70338. doi: 10.1002/open.70338

Z‐Scheme Heterojunction Photocatalysts for Energy and Environmental Applications

Mahalakshmi Ramar 1,2, Radhakrishnan Kotham 1,2,✉, Manikandan Ayyar 1,3,✉, Subasree Nattarasu 4, Zeinebou Yahya 5, Lalitha Gnanasekaran 6, Shanmugapriya Dharani 7, Abinet Gosaye Ayanie 8,✉
PMCID: PMC13760076  PMID: 43021489

Abstract

Z‐scheme heterojunction photocatalysts offer a promising strategy for achieving strong oxidation–reduction potentials while enhancing the spatial separation of photogenerated charge carriers for solar‐driven chemical transformations. This review develops a comprehensive framework connecting interfacial structure, charge transfer dynamics, mechanistic evidence, catalytic performance, stability, and scalability. Type‐II, mediator‐based, all‐solid‐state, and direct Z‐scheme systems are critically compared with emerging S‐scheme architectures, emphasizing band alignment, Fermi‐level equilibration, interfacial band bending, built‐in electric fields, defects, morphology, surface states, and interface chemistry. Mechanistic interpretations are evaluated using complementary techniques, including Mott–Schottky analysis, valence‐band XPS, Kelvin probe force microscopy, surface photovoltage spectroscopy, in situ/operando XPS, electron paramagnetic resonance, transient and ultrafast spectroscopy, isotope labeling, and DFT calculations. Advanced interface engineering strategies involving doping, vacancy regulation, dimensional control, conductive mediators, cocatalysts, and hierarchical architectures are discussed for water splitting, hydrogen evolution, H2O2 generation, CO2 conversion, and environmental remediation. Key challenges include mechanistic ambiguity, inconsistent performance evaluation, photocorrosion, elemental or mediator leaching, interfacial degradation, catalyst recovery, real wastewater treatment, and long‐term stability. Future directions emphasize standardized testing, immobilization, reactor engineering, waste management, resource recovery, techno‐economic assessment, and life‐cycle analysis to enable scalable, low‐cost, and sustainable solar energy and environmental technologies for practical deployment across diverse operating conditions and real‐world industrial applications at scale.

Keywords: interfacial charge transfer, solar energy conversion, sustainable consumption, waste management, Z‐scheme heterojunctions


This review provides a comprehensive framework for understanding Z‐scheme heterojunction photocatalysts, linking interface engineering, charge transfer mechanisms, characterization strategies, and catalytic performance. It highlights applications in water splitting, CO2 conversion, H2O2 generation, and environmental remediation while identifying challenges in mechanistic verification, stability, standardization, scalability, and life‐cycle assessment toward sustainable solar‐driven technologies.

graphic file with name OPEN-15-e70338-g006.webp

1. Introduction

A new junction in the application of photocatalysis in energy and environmental applications is the use of Z‐scheme heterojunction (ZSHJ) photocatalysts, which has both high redox potential and efficient charge separation. Graphitic carbon nitride (g‐C3N4, gCN) and its derivatives are widely investigated among semiconductors; they have chemical stability, tunable electronic structure, and charge carrier separation, making them suitable component for direct ZSHJs in water splitting, CO2 reduction, and pollutant degradation. However, pure gCN has a low surface area, poor light absorption, and low recombination rates, which complicates the construction and charge transfer regulation of ZSHJs and requires solutions in the development of bandgap engineering, morphology regulation, and scalable green synthesis [1].

Recent studies have addressed these limitations thorough various Z‐scheme architectures. The ZnIn2S4/NiWO4 nanostructure exhibits a hydrogen evolution rate of 16.3 mmol g−1 h−1, which is 3.57 times faster than that of ZnIn2S4, which was attributed to the efficient charge transfer in the Ag2MoO4/Bi4Ti3O12 heterojunctions and enhanced pollutant degradation, confirmed by both the X‐ray diffraction (XRD) and the photoluminescence (PL) analysis and the electrochemical analysis [2, 3]. Others are Ag3VO4/BiVO4 to reduce Cr6+ [4], large π‐delocalized g‐C3N4/P1Cl‐T polymers with 111.8 mmol−1g−1 H2 [5], and 2D/2D g‐C3N4/Bi4Ti3O12 with long carrier lifetimes [6]. The composites BiOIO3/g‐C3N4 allow the degradation of trichlorophenol by the use of I3 −/I− reduction pathways [7], and CdS@CoWO4 spheres promote the photocatalytic degradation of micropolutants [8].

Ternary and hierarchical systems increase functionality, reduced graphene oxide (rGO)/g‐C3N4/Fe2O3 to produce H2 [9], MoO3/g‐C3N4 to produce H2, 87‐fold higher H2 evolution rate [10], and Ag3PO4/g‐C3N4 to produce O2 [11]. Recent heterostructure designs consist of CoS/CdS at carbon nitride double‐shells [12], g‐C3N4/BiOI/CdS double Z‐schemes [13], ZnO/MoS2 nanoarrays based on piezoelectric effects [14], and ZnIn2S4/TiO2 to selectively reduce 4‐nitroaniline [15]. Multinary SnIn4S8/ZnIn2S4 has a high H2 evolution rate [16], WO3/CDots/CdS are all‐solid‐state Z‐schemes with enhanced photostability [17], LaFeO3/g‐C3N4 composites with enhanced dye degradation rate [18], and AgBr/P‐g‐C3N4 promotes the photocatalytic degradation [19]. Agnosals Cd nanosheets designed as Cu2S/Zn0 . 67Cd0 . 33S exhibit atomic in‐plane Z‐scheme transfer with H2 yield of 15.27 mmol−1g−1 H2 [20]. New ternary strategies are CdS/BiOBr/Bi2O2CO3 to degrade herbicides [21], g‐C3N4/Ag3 PO4/Ag2MoO4 to evolve oxygen [22], and Zn0 . 5Cd0 . 5S/Au@g‐C3N4 to reduce CO2 to methanol [23]. Combined, these developments demonstrate the potential of Z‐scheme photocatalysts in solar energy conversion, environmental remediation, and water purification and indicate the need to design interfaces, optimize light collection, and scale‐up production.

Altogether, ZSHJs are the heterojunction architecture to the effective transformation of solar‐driven redox reactions with large oxidative and reduction potentials. The interface design, morphology control, and heterostructure design that have delivered interface and morphology engineering have yielded improvements in solar energy conversion and environmental remediation. However, there are challenges on the means through which long‐term stability, fabrication on a large scale, and standardized performance evaluation will be achieved. Additional in situ characterization, computational modeling, and data‐driven design activities are necessary to augment mechanistic understanding and accelerate materials discovery. The review aims to essentially critically examine the structural system, charge carrier processes, and mechanistic knowledge on Z‐scheme photocatalysts and how it can be utilized in connecting fundamental research with scalable energy conversion and environmental remediation technologies.

2. Fundamentals of Charge Transfer Mechanisms

2.1. Type‐II Heterojunctions and Their Transition to Z‐Scheme Architectures

ZSHJs not only increase carrier lifetimes but do not decrease redox potentials in the manner that type‐II heterojunctions do, which not only promotes charge separation but also diminishes oxidation reduction capability. The energy band engineering based on the concept of absolute electronegativity inhibits type‐II alignment and allows Z‐scheme transfer. To give an example, a GaPO4/α‐MoC/Ga2O3 system lacks type‐ii interaction and the Ga2O3 CB, VB, and Fermi levels are higher than the GaPO4, enabling the system to recombine through α‐MoC and fourfold the increase in CO2 reduction than Ga2O3 [24].

Heterostructures 2D heterostructures possess high interfaces and have tunable bandgaps. Z‐scheme behavior of a holey C1/h2D‐C2 N/C3B composite is demonstrated in water splitting, and strain‐modulated band edges have all been found to be highly redox active [25]. Similarly, among 24 van der Waals (vdW) WSe2/HfZrCO3 heterostructures, a single Z‐scheme was found to have stability, positive charge transfer, and hydrogen generation potential [26]. Z‐schemes can also be used in biomedicine in photocatalysts. Direct FeS2/Fe2O3 Z‐scheme thermally oxidized pyrite nanosheets (FeS2 core/Fe2O3 shell/TOPY NSs) generate ROS and have photothermal and imaging capabilities [27]. Semiconductors, MOFs, and hybrid heterostructures have been studied in type‐II, Z, and S‐systems in environmental remediation by reducing Cr(VI) with the aid of H2 generation [28]. The transition metal dichalcogenides can be provided as alternative directions. Janus MoSSe/Ga2SSe vdW heterostructures can be tuned to alignments and high intrinsic fields, and one Z‐structure has reported high visible UV absorption and STH efficiencies of 11.84% and 10.13% [29]. Single semiconductors are, however, a compromise between bandgap, light harvesting, and redox power. Type‐II is not as problematic, but since they have lower potentials, Z‐scheme structures are sought [30].

It is the interface control, which is important. Cu2O/g‐C3N4 p‐n heterojunctions with lotus seedpod‐like architecture yielded H2 evolution of 637.5 µmol/g−1h−1. Combined, these publications confirm that the correct placement of band and interfacial design is the main solution to the promotion of Z‐scheme photocatalysts, to overcome the type‐II limitations, to enable the effective solar‐to‐chemical transformation, and to clean the environment, as shown in Table 1.

TABLE 1.

Summary of representative studies on type‐II heterojunctions and their transition to Z‐scheme architectures.

Photocatalyst system Mechanism/design strategy Application/outcome Reference
GaPO4/α‐MoC/Ga2O3 Avoidance of type‐II alignment via band engineering; α‐MoC mediator enables recombination of GaPO4‐CB electrons and Ga2O3‐VB holes Fourfold enhancement in CO2 photoreduction activity compared to pristine Ga2O3 [24]
h2D‐C2N/C3B (2D heterostructure) DFT‐based strain modulation tunes band edges; preserves strong redox potentials in CB of C3B and VB of h2D‐C2N Ideal HER and OER potentials achieved, promising for water splitting [25]
WSe2/HfZrCO2 (vdW heterostructure) First‐principles design of 24 configurations; one Z‐scheme with efficient charge separation Stable photocatalyst for hydrogen generation in neutral and acidic media [26]
Thermally oxidized pyrite nanosheets (FeS2/Fe2O3) Direct Z‐scheme plus Fenton reaction; Fe3+/Fe2+ redox cycling enhances ROS Glutathione depletion, O2 production, ·OH generation; biomedical photonics and imaging [27]
Semiconductor/MOF and hybrid heterostructures Type‐II, Z‐scheme, and S‐scheme designs for redox tuning Cr(VI) reduction coupled with H2 generation for wastewater remediation and energy recovery [28]
Janus MoSSe/Ga2SSe (vdW heterostructure) Built‐in electric field suppresses recombination; direct Z‐scheme band alignment High STH efficiency (11.84% and 10.13%) for water splitting [29]
General limitation of type‐II systems Charge separation achieved, but oxidation/reduction potentials are weakened Motivation for Z‐scheme photocatalysts [30]
Cu2O/g‐C3N4 p–n heterojunction Lotus‐seedpod‐like interface enhances carrier migration H2 evolution rate of 637.5 µmol g−1 h−1 (40× higher than pure g‐C3N4) [31]
g‐C3N4/CoN4(111) vdW heterostructure Bandgap tuning from type‐I to type‐II by strain/electric field Versatile candidate for solar water splitting [32]
g‐C3N4/TiO2 nanotube composite Ratio‐dependent transition from type‐II to Z‐scheme Optimal H2 evolution at g‐C3N4/TiO2 ≈ 0.6 [33]

2.2. Z‐Scheme Versus S‐Scheme

Heterojunctions with Z‐scheme and S‐scheme configurations are constructed, which can overcome the principal limitation of typical type‐II systems, where the spatial charge separation can be improved but at the expense of strong redox potentials. Although the mechanistic description of the two Z‐scheme and S‐scheme architectures is different, both of them preferentially retain highly reducing electrons and strongly oxidizing holes. The Z‐scheme model emphasizes selective recombination of low‐energy electrons with weakly oxidizing holes, whereas the S‐scheme model additionally describes the interfacial electronic processes responsible for this selective charge transfer, including Fermi‐level equilibration, band bending, and formation of a built‐in electric field (BIEF) [34]. In a direct Z‐scheme, the photogenerated electrons from the oxidation photocatalyst recombine directly with the photogenerated holes of the reduction photocatalyst, leaving the high‐energy electrons and holes available for reduction and oxidation reactions, respectively. A heterojunction comprising 1T/2H‐MoS2/ZnS was attributed as a direct Z‐scheme based on interfacial electronic coupling, electron paramagnetic resonance (EPR) analysis, and density functional theory (DFT) calculations. Nevertheless, an increase in photocatalytic activity alone does not confirm a Z‐scheme mechanism; it is necessary also to experimentally verify the postulated direction of charge transfer and retention of the redox‐active carriers [35].

A more rigorous sense of distinction between S‐scheme charge transfer and conventional type‐II is given by the interfacial electronic equilibration. When an interface is formed, the electronic structure and work function mismatches lead to charge rearrangement at the interface. This causes band bending and the formation of an electric field where weakly reducing electrons and weakly oxidizing holes will recombine. Most importantly, these electronic features need to relate to a measurable carrier transfer behavior and not just band alignment. A new donor–acceptor covalent organic framework (D–A COF)/ZnIn2S4 quantum‐dot heterojunction shows that combining X‐ray photoelectron spectroscopy (XPS) and Kelvin probe force microscopy (KPFM) with EPR works to analyze electronic interactions at heterointerfaces and the corresponding S‐scheme charge transfer route. The prepared heterostructure displayed much enhanced H2O2 production than the sole components, which indicates that interfacial electronic coupling can facilitate carrier separation while maintaining the redox‐active carriers for O2 reduction [NEW REF]. Accordingly, the S‐scheme assignment should be based on concomitant evidence for interfacial charge redistribution, electric field formation, carrier migration, and redox species generation, not just on photocatalytic activity [36]. On the other hand, the S‐scheme mechanism is associated with interfacial electronic equilibration between two semiconductors with different Fermi levels. Upon contact, electron distribution takes place until the Fermi levels are aligned, creating interfacial charge accumulation, band bending, and BIEF. This field will promote the selective recombination of the photogenerated electrons and holes with weaker redox abilities upon illumination while preserving the strongly reducing electrons and strongly oxidizing holes. Consequently, the BIEF and the corresponding band bending offer electronic basis for the carrier selection behavior of the S‐scheme. The proposed S‐scheme charge transfer pathway was supported by photoirradiated Kelvin probe measurements and in situ irradiated XPS (ISIXPS) [37, 38].

The assessment of interfacial electronic structure in Bi2MoO6/MoS2 2D/2D heterojunctions presents further evidence that KPFM, valence‐band XPS, and Mott–Schottky measurement were jointly utilized to establish the heterojunction electronic structure. The electric field generated at the interface is envisioned to facilitate the directional transfer of charge while ensuring that the two components maintain their respective redox capabilities. The evidence combined provides stronger mechanistic evidence support than asserting that an S‐scheme mechanism arises from merely band positions or photocatalytic activity [39]. Examining the interfacial electric field is important for evaluating S‐scheme behavior. Differences in Fermi‐level alignment in facet‐engineered ZnIn2S4/BiOBr heterojunctions resulted from changing BIEF strength and band bending. The stronger interfacial field enhanced selective recombination of weakly reducing electrons and weakly oxidizing holes, which halted recombination of the conduction‐band electrons of ZnIn2S4 and strongly oxidizing valence‐band holes of BiOBr. This shows that interface configuration and electronic characteristics can control the S‐scheme charge transfer pathway [40]. The linear dependence of the photocurrent on the laser intensity evidenced two‐photon absorption (TPA) events. KPFM provides 3D images of changes in surface potential, while the in situ irradiated XPS can show illumination‐induced changes in electronic density. Femtosecond transient absorption spectroscopy (fs‐TAS) and EPR give complementary information about carrier transfer kinetics and reactive species. Recent KPFM measurements that were spatially resolved show that the surface potential responses on the reduction and oxidation photocatalysts in S‐scheme systems were different when illuminated [41].

The existence of an interfacial electronic bridge can make it difficult to differentiate the Z‐scheme from S‐scheme. In a g‐C3N4/V2C/ZnIn2S4 heterojunction, V2C MXene functioned as an interfacial charge transfer material, while in situ EPR, fs‐TAS, and DFT computations were used to decipher the electron transfer route. The dynamic measurement is useful because it provides direct evidence of carrier migration (or not) which cannot be resolved from the static band diagrams that were used to propose the heterojunctions mechanisms [42]. Measurements of work function provide another important criterion for determining interfacial charge transfer direction. In TiO2/MXene systems, KPFM measurements revealed that the charge transfer direction was determined by the work function difference across the components. By altering the MXene surface, the work function was modified and thus interfacial carrier transfer behavior changed. These findings highlight the need for experimental determination of the work functions when proposing S‐scheme mechanisms instead of inferring solely from the electron transfer direction based on nominal band positions [43].

2.3. Mediator‐Based, All‐Solid‐State, and Direct Z‐Scheme Architectures

Effective Z‐scheme photocatalysts rely on interface engineering, and mediator‐based, all‐solid‐state, and direct designs have enhanced charge separation, carrier lifetime, and redox capacity. Conductive components are utilized in mediator‐based systems as electron shuttles. Oxidized TiO2/MgIn2S4 (MIS) composites were prepared, with the MIS microflowers anchored on the Ti3C2 nanosheets, promoting ciprofloxacin and liberating H2 at 92 and 520.3 µmol h−1, respectively, depending on the charge transfer by Ti3C2 [44]. Under an rGO‐mediated CdS/rGO/WO3 heterojunction, enhanced charge transport through rGO resulted in 11.69 mmol g−1 h−1 (2.3× pure CdS) [45]. MXene‐based electron shuttling was also applied to another system, in which TiO2/Ti3C2TiC/CZUNH was used to produce H2O2 and H2 [46]. The chemically bonded designs also exhibited enhanced photocatalytic performance, a Bi/BiOBr@Bi‐MOF heterojunction was employed to degrade chlortetracycline (97.1% oxygen vacancy‐mediated) using Bi mediation [47], and N‐rGO‐mediated NiFe LDH/g‐C3N4 system exhibited high H2 evolution [48].

All‐solid‐state Z‐schemes are redox neutral, that is, they are stable and do not disrupt the environment. A 1T/2H‐MoS2@BCN hybrid has reported 290 µmol h−1 and 95% degradation of TCH, which compares well with 1T‐MoS2 [49]. A NiTiO3/Cd0.5Zn0.5S direct heterostructure generated 1058 µmol h−1 of H2 and AQY of 34 at 420 nm, without noble metal cocatalysts [50]. Others are Fe2O3/g‐C3N4 to reduce CO2, carbon dots/WO3 to degrade RhB [51], and red P/RGO/WO3 to split water (287 mmol g−1h−1) [52]. Ternary systems also make it more efficient. Bi4O5I2/GO/Bi2Sn2O7 reduced tetracycline by 90.31%, and GO aided in the transfer of charges [53]. Direct Z‐schemes are also promising: MnIn2S4/g‐C3N4 nanocomposites were more effective in wastewater removal and H2 production [54]; g‐C3N4/WO3 host–guest structures had atomically defined interfaces and could produce H2 by using internal electric fields [55]; and CdS@ZnIn2S4 hollow structures produced stoichiometric H2 and H2O2 [56]. Structural engineering further increases the efficiency of remediation, with g‐C3N4/WO3 homogeneous microspheres having 5.7‐fold greater tetracycline degradation and CuTPP/HBVO vacant oxygen cases demonstrating 4.5‐fold Z‐scheme transfer and effective 2‐chlorophenol degradation at the Cu I active site [57, 58].

A combination of mediator‐based, all‐solid‐state, and direct Z‐schemes is an example of the success of rational interface engineering in energy conversion and environmental remediation. The representative mechanisms are shown in Figure 1a, where the direct ZSHJ (TiO2/g‐C3N4) with charge transfer is shown, where electrons in the TiO2 CB and holes in the g‐C3N4 VB recombine with each other, and where the other charge carriers generate redox reactions to enhance photocatalytic reactions [59]; (b) the schematic of a Z‐scheme system based on redox mediators (WO3/Cu2O), where the photocatalysts are linked together by redox mediators that drive electron flow between them, facilitating charge separation and producing reactive oxygen species (ROS) for photocatalytic reactions [60]; (c) directed charge transfer under visible light using an all‐solid‐state ZSHJ (g‐C3N4/MOC‐Q2), where a solid electron mediator enables efficient H2 evolution through enhanced redox reactions [61]; and (d) direct Z‐scheme charge transfer in the band structure of p‐BiOCl/n‐Bi2WO6, conceptualizing strong redox potential and efficient photocatalytic performance [62].

FIGURE 1.

FIGURE 1

(a) Direct ZSHJ (TiO2/g‐C3N4) with charge transfer, electrons in TiO2 CB recombine with holes in g‐C3N4 VB, and the remaining charge carriers generate redox reactions to boost photocatalysis [59]. (b) Schematic of a mediator‐based Z‐scheme system (WO3Cu2O with EDTA) in which the photocatalysts are linked together by redox mediators that drive the flow of electrons between them, facilitating the process of charge separation and producing ROS to be used in photocatalytic reactions [60]. (c) Directed charge transfer under visible light using all‐solid‐state ZSHJ (g‐C3 N4/MOC‐Q2) in which a solid electron mediator facilitates the reaction, leading to efficient H2 evolution in response to improved redox reactions [61]. (d) Direct Z‐scheme charge transfers in band structure of p‐BiOCl/n‐Bi2WO6 conceptualizing strong redox potential and efficient photocatalytic performance [62].

2.4. Criteria for Identifying and Distinguishing Mechanisms

Type‐II, Z‐scheme, and S‐scheme heterojunctions cannot be distinguished solely on the basis of the proposed band‐alignment diagram but need other experimental evidence. While these mechanisms can promote spatial separation of the photogenerated electron–hole pairs, they have fundamentally different charge transfer pathways and retained redox potentials. So, band structure analysis, charge transfer at the interface, BIEF activation, light‐induced charge transfer, and charge carrier dynamics evaluation must be used for identifying the mechanism. According to recent studies, complementary spectroscopic, photoelectrochemical (PEC), and theoretical approaches are needed to establish reliable charge transfer pathways [63].

The semiconductor type and band‐edge positions are basic criteria for evaluating a proposed heterojunction mechanism. Analysis via Mott–Schottky can determine the semiconductor type and flat band potential, while valence‐band XPS gives the valence‐band maximum. Taking into account the optical bandgap, these assessments also allow for estimating the conduction‐band position and evaluating the thermodynamic feasibility of the expected charge transfer process. The combination of EPR, valence‐band X‐ray photoelectron spectroscopy (VB‐XPS), and Mott–Schottky measurements in the CdIn2S4/ZnO/PAN system endorsed the suggested interfacial charge transfer pathway, highlighting the importance of relating electronic structure measurements with photocatalytic behavior [64]. When two semiconductors with different electronic properties are brought into contact, this can lead to interfacial electron redistribution, which causes band bending and a BIEF. In S‐scheme heterojunctions, the interfacial field that can be formed can provide directional driving forces for photogenerated carriers. Importantly, KPFM and surface photovoltage measurements can directly probe changes in surface potential associated with charge redistribution. Moreover, through quantitative investigation of BIEF intensity, it has been established that the interfacial electric field is associated with photocatalytic charge utilization. Therefore, BIEF should be evaluated as an experimentally measurable electronic parameter of heterojunction models [65]. The BIEF's relevance can be showcased further using KPFM measurements, both in dark and illuminated conditions. Surface potential measurements of n‐type and p‐type semiconductor components show opposite results indicating different surface charge response and interfacial electric field formation. Since they provide experimental information about the charge redistribution direction and how the interface impacts the separation of photogenerated carriers, such measurements can enhance band alignment studies [66].

XPS offers an essential means of identifying the interfacial redistributions of electrons occurring through the shifts of core‐level binding energies. When there is an increase in binding energy, it means the electron density around the element decreases and likewise the reverse. Consequently, the comparison of the individual components and heterojunction in dark conditions can unveil charge redistribution direction after interface formation. ISIXPS can reveal illumination‐induced changes and thus more directly determine the direction of photogenerated electron migration. Evidence of interfacial electron redistribution and light‐induced electron transfer in the COF‐5/ZnIn2S4 system, inferred from dark‐ and light‐state binding energy shifts, supported the proposed S‐scheme mechanism [67]. It has been highlighted that the capability of a proposed heterojunction to maintain strong redox potentials can serve as an important criterion to distinguish type‐II from Z‐scheme and S‐scheme mechanisms. In a standard type‐II scenario, photogenerated electrons are attracted toward the semiconductor possessing the lower conduction‐band position, while holes migrate toward the semiconductor with the higher valence‐band position. While this pathway can spatially decouple carriers, it can simultaneously weaken the reducing and oxidizing power of the entire component. On the contrary, electrons with higher reduction potential and holes with higher oxidation potential are preferentially preserved in S‐scheme and Z‐scheme mechanisms. Thus, detection of ROS or other radical intermediates by EPR, when combined with band positions obtained experimentally, can provide mechanistic evidence. The heterostructure F‐TiO2/CdS can produce more radicals than pure TiO2. This means that it can retain the strong reduction capability of CdS and the oxidation capability of F‐TiO2. Thus, the authors believe that the S‐scheme charge transfer model proposed also holds true for this heterostructure [68]. An increase in photocurrent response, a decrease in charge transfer resistance, surface photovoltage variations, and an improvement in carrier lifetime can serve as additional evidence for effective interfacial charge separation. For instance, the MoS2/Bi2S3/Bi2WO6 photoanode showed markedly enhanced photocurrent compared to pristine Bi2WO6, while the combined structure and electronic analyses were employed to rationalize its improved photoelectrochemical performance using a coupled heterojunction charge transfer pathway. When considered with band positions and interfaces as opposed to independently assigning any one mechanism, such evidence is particularly useful [69].

Static band structure measurements cannot fully determine the actual pathway of photogenerated carriers. Direct study of charge carrier dynamics provides stronger mechanistic evidence. fs‐TAS resolves ultrafast carrier transfer processes, in situ irradiated XPS tracks illumination‐induced changes in electronic density, and KPFM measures surface potential variations. There is increasing interest in using these techniques to distinguish S‐scheme charge transfer from typical type‐II behavior [70]. By changing carrier concentration, Fermi‐level alignment, surface states, and the strength of the BIEF, the interfacial charge transfer behavior can be altered significantly through defect engineering. It was demonstrated in ZnIn2S4−x /MoO3−x that simultaneous oxygen‐ (O‐) and sulfur‐ (S‐) vacancy engineering can alter the interfacial electric field and charge transfer dynamics while improving photocatalytic hydrogen evolution. Observations, such as these imply that defect‐triggered electronic structure modifications, could potentially supplement our understanding of defect‐induced carrier separation enhancement origin, although defect effects should be disentangled from the intrinsic heterojunction mechanism [71]. In the end, a robust mechanistic assignment should result from the convergence of various independent observations and not from a single characterization technique. The thermodynamic framework is established by band positions; the electronic structure is defined by Mott–Schottky and VB‐XPS measurements; interfacial and light‐induced electron redistribution is established by XPS and in situ irradiated XPS; evidence of surface potential changes and BIEF formation is provided by KPFM/surface photovoltage (SPV); the changes in reactive species and redox behavior are verified by EPR; and separation of the carrier migration. The interfacial interactions’ role in charge separation has been further demonstrated in a TiO2/ZnIn2S4 S‐scheme system through in situ XPS, in situ KPFM, and DFT analyses [72]. The summary experimental and theoretical criteria for distinguishing type‐II, Z‐scheme, and S‐scheme heterojunctions are shown in Table 2.

TABLE 2.

Experimental and theoretical criteria for distinguishing type‐II, Z‐scheme, and S‐scheme heterojunctions.

Characterization technique Key information obtained Mechanistic significance Evidence strength Major limitation Reference
Mott–Schottky analysis Semiconductor type, flat band potential and approximate CB position Establishes the basic band structure and thermodynamic feasibility of charge transfer Moderate Does not directly reveal the direction of photoinduced charge migration [63]
VB‐XPS Valence‐band maximum and VB electronic structure Determines the oxidation‐potential framework required for evaluating possible charge transfer pathways Moderate Provides mainly static information and cannot independently distinguish Z‐scheme from S‐scheme [64]
KPFM/SPV Surface potential distribution, work function variation, and light‐induced potential changes Provides evidence for interfacial charge redistribution and BIEF formation Strong Surface potential can be influenced by defects, adsorbates, and environmental conditions [65]
Dark/light KPFM measurements Potential changes before and after illumination Helps determine light‐induced carrier redistribution and the influence of the interfacial electric field Strong Requires careful interpretation of potential polarity and surface charging [66]
Dark‐state XPS Core‐level binding energy shifts after heterojunction formation Indicates equilibrium electron redistribution between the two components Moderate–strong Binding energy shifts can also originate from chemical state changes, defects or charging [67]
EPR/ESR and radical trapping experiments Formation of •O2 −, •OH and other reactive species Indicates whether the surviving carriers possess sufficiently strong reduction/oxidation potentials Moderate Reactive species detection does not directly establish the carrier transfer direction [68]
Photocurrent and EIS Carrier separation/extraction and interfacial charge transfer resistance Supports improved carrier separation and transport after heterojunction formation Weak–moderate Cannot independently distinguish type‐II, Z‐scheme and S‐scheme pathways [69]
fs‐TAS Ultrafast carrier transfer, accumulation, and recombination dynamics Provides dynamic evidence for interfacial charge transfer processes and their timescales Strong Complex transient signals require careful spectral assignment [70]
Defect/vacancy engineering with electronic characterization Changes in carrier concentration, surface states, Fermi‐level alignment, and interfacial electronic structure Helps determine how defects modify charge redistribution and BIEF‐assisted carrier dynamics Moderate Defect effects may be independent of the intrinsic heterojunction mechanism [71]
Combined in situ XPS + KPFM + DFT Experimental charge redistribution, surface potential changes, and theoretical electronic structure Provides convergent evidence for interfacial charge transfer and proposed S‐scheme behavior Strong Requires multiple complementary measurements and consistent interpretation [72]

3. Design Principles of Z‐Scheme Photocatalysts

3.1. Band Alignment and Fermi‐Level Engineering

ZSHJs have been shown to be charge separated, transferred, and photocatalyzed by the energy band structure. The ability of heterojunctions to store redox potential and to control carrier migration can be realized by precise band alignment and tuning of the Fermi level using doping, interface modulation, vacancy engineering, and mediator selection schemes. The production of sulfur vacancies and red phosphorus (RP) resulted in a ZnIn2S4‐S/carbon nanotubes (CNTs)/RP nanocomposite capable of evolving H2 at 1639.9 µmol g−1h−1 because it was high in Fermi‐level difference and could transfer it through the Z‐scheme [73]. Heterojunctions of ZnS/SnS2 dissolved 93.46% of tetracycline, and Z‐scheme overlaps were checked by band offsets (ΔECB = 1.02 eV; ΔEVB = 0.22 eV) [74]. Nitrogen doping as well as CdS deposition on ZnIn2S4 gave CdS/N‐ZIS heterostructures with high interfacial fields, producing 15.7 µmol g−1 h−1 H2 (7.4× pristine ZIS) [75]. The type‐I, g‐ZnO vdW heterostructures were studied through the DFTs, and a potential difference of 11.18 eV was reported, indicating that external strain and electric fields could facilitate transitions between type‐I, type‐Z, and type‐II modes [76]. Facet engineering of directional charge transfer was also reported in TiO2‐Pd‐Cu2O, which confirmed the Fermi‐level sequence (TiO2 < Pd < Cu2O) to facilitate degradation of phenols [77]. Fermi level changes in BiVOx/BiOBrOv changed the type‐II transfer to a Z‐schemed mechanism and reached 91% of oxytetracycline degradation [78].

The BiOI/Pt/g‐C3N4 system degraded phenols 6.0 times better than bare g‐C2N4, and the catalyst Pt mediated efficient charge transfer [79]. A WO3/Cu/g‐C3N4 heterojunction was used to maximize the generation of •OH, with the intermediate Fermi level of Cu, which was found to degrade 4‐nonylphenol 11.6× faster than WO3/g‐C3N4 [80]. An ultrathin ZnIn2S4/g‐C3N4 had high interfacial fields and high H2 evolution without cocatalysts [81]. However, vdW heterojunctions of ZnTe/ZrS2 displayed strain‐induced light absorption, type‐II alignment, and 14.3% conversion efficiency [82]. These results indicate that directional charge transfer is indeed controllable accurately by doping, vacancies, facet control, and choice of mediators, enhancing the alignment of bands and positioning of bands at the Fermi level to maintain redox potential and high photocatalytic activity in the generation of solar fuels and environmental remediation.

An example of Fermi‐level and band alignment engineering in Z‐schemes is shown in Figure 2a TiO2/Bi2O3 heterojunction band alignment that illustrates engineered Fermi‐level alignment, direct Z‐scheme charge transfer and enhanced redox capabilities, and photocatalytic activity under visible light [83]; (b) WO3/Co2SnO4 heterojunction band structure that demonstrates optimal Fermi‐level alignment, direct Z‐scheme charge transfer, and improved redox performance under visible light [84]; (c) charge transfer, internal electric field formation in a BOC/BOI ZSHJ, catalyzing redox reactions, even without irradiation [85]; and (d) ZSHJ band alignment with engineered Fermi‐level positioning and free energy profile to accelerate H2 evolution [86].

FIGURE 2.

FIGURE 2

(a) A TiO2/Bi2O3 heterojunction band alignment that demonstrates how the Fermi level can be engineered to enhance direct Z‐scheme charge transfer and increased redox capacity and photocatalytic activity under visible‐light irradiation [83]. (b) A WO3 at Co2SnO4 heterojunction band structure illustrating the best alignment of the bands and Fermi level engineering of such that can efficiently transfer charge through direct Z‐schemes to pollute materials, which react strongly to visible‐light irradiation [84]. (c) Charge transfer and internal electric field formation in a ZSHJ of BOC/BOI in the absence of light irradiation along with an efficient redox reaction [85]. (d) ZSHJ with charge transfer band alignment, H2 evolution facilitated by Fermi‐level engineering, and the corresponding free energy profile [86].

3.2. Built‐in Electric Fields and Interfacial Band Bending

The formation of a BIEF at a semiconductor interface is a fundamental consequence of interfacial charge redistribution and plays a central role in directing photogenerated carrier transport. When two semiconductors with different electronic structures are brought into contact, differences in Fermi levels drive electron redistribution until interfacial equilibrium is established. The resulting space charge region, band bending, and internal electric field modify the local energy landscape and provide a driving force for directional carrier separation. In S‐scheme heterojunctions, this interfacial electric field is proposed to selectively drive the migration and recombination of photogenerated carriers with weaker redox abilities while preserving the strongly reducing electrons and strongly oxidizing holes. Spatially resolved KPFM measurements have directly visualized illumination‐induced surface potential changes and carrier accumulation on the reduction and oxidation photocatalysts, providing experimental evidence for the role of the interfacial electric field in S‐scheme charge separation [87].

The BIEF is closely associated with interfacial band bending, which originates from charge redistribution within the space charge region. Rather than treating the electric field as a qualitative feature of a band diagram, its influence should be evaluated through experimentally measurable changes in surface potential and carrier distribution. KPFM combined with spatially resolved surface photovoltage measurements has demonstrated that the surface space charge region can determine the direction of photogenerated carrier transport in individual semiconductor particles. In n‐type BiVO4 and p‐type Cu2O, spatially distributed photogenerated carriers were correlated with the internal electric field within the surface space charge region, demonstrating that the field can promote unidirectional carrier migration between the bulk and surface [88]. The magnitude and direction of the BIEF are strongly dependent on the electronic properties and interfacial structure of the coupled materials. Fermi‐level differences, work function mismatch, surface states, defects, and crystallographic interfaces can all modify interfacial charge redistribution and consequently alter the extent of band bending. In lattice‐matched CsPbBr3/CsPb2Br5 polytypic nanocrystals, KPFM measurements revealed an increase in the interfacial BIEF from 43.5 to 68.7 mV, while ultrafast transient absorption measurements identified additional interfacial carrier transfer pathways. These observations demonstrate that reducing structural mismatch and strengthening atomic scale interfacial coupling can modify the interfacial electronic potential and facilitate charge transfer [89].

Direct visualization of carrier distributions further demonstrates that BIEF‐mediated transport is not necessarily uniform across a photocatalyst surface. Electron microscopy investigations of BiOBr platelets with contiguous facet junctions revealed that photoexcited electrons were spatially redistributed according to the local internal electric fields. The measured carrier distributions could be described using diffusion and drift contributions, demonstrating that both particle dimensions and field‐dependent drift distances influence charge separation efficiency. These findings indicate that BIEF‐driven carrier transport should be considered a spatially dependent process rather than simply a binary bulk‐to‐interface migration [90].

The BIEF can also originate from ferroelectric polarization, where spontaneous polarization produces an internal electrostatic potential capable of directing photogenerated carriers. Spatially resolved surface photovoltage measurements of single‐domain PbTiO3 nanoplates demonstrated that the depolarization field can drive photogenerated electrons and holes toward opposite polarization facets. The magnitude of this driving force depends on the potential difference generated across the polarized particle, while screening fields can partially compensate the depolarization field. These observations establish polarization‐induced electric fields as another mechanism capable of controlling spatial charge separation [91]. Ferroelectric polarization can additionally interact with semiconductor interfaces to modify charge transfer pathways. In BaTiO3/CdS hybrid photocatalysts, the dipolar fields associated with ferroelectric BaTiO3 were reported to facilitate carrier migration from CdS toward the surface, illustrating how polarization‐induced electrostatic fields can regulate carrier transport across semiconductor/ferroelectric interfaces. However, such systems should be distinguished from conventional S‐scheme heterojunctions because polarization‐induced fields and Fermi‐level‐driven BIEFs can have different physical origins [92].

The influence of polarization and internal electric fields can be further modified through defect and compositional engineering. In Pr/Mn co‐doped BiFeO3, suppression of oxygen‐vacancy‐related defects and modification of the ferroelectric phase structure altered the polarization behavior and photoelectrochemical response. Such observations emphasize that defects can influence BIEF strength indirectly by modifying polarization, surface electronic states, and carrier density. However, changes in photocurrent or polarization alone do not establish a specific S‐scheme or Z‐scheme charge transfer pathway and should therefore be interpreted as supporting evidence for interfacial field regulation [93]. Internal electric fields can also be deliberately coupled with heterojunction formation to regulate carrier separation. In BiFeO3/ZnIn2S4, ferroelectric polarization and the interfacial electric field were combined to promote charge separation and carrier migration. This demonstrates that multiple electrostatic driving forces can coexist within a heterostructure and collectively influence carrier dynamics. Nevertheless, the presence of an internal electric field does not by itself distinguish a Z‐scheme from an S‐scheme; the direction of carrier migration and the origin of the field must be independently established [94].

Recent studies further demonstrate that the BIEF can substantially modify charge transfer pathways even when the interface does not conform to a conventional semiconductor–semiconductor heterojunction. In Cu‐Ni3S4/Mn0 . 5Cd0 . 5S, combined in situ XPS, KPFM, fs‐TAS, and DFT/TDDFT calculations were used to demonstrate an interfacial electric field that altered the expected carrier migration direction in a Schottky‐type architecture. This provides an important mechanistic distinction: The existence of an IEF is not sufficient to assign an S‐scheme mechanism because the field can also modify charge transport in Schottky, ferroelectric, and other interfacial systems [95].

3.3. Insights From Density Functional Theory (DFT) and Computational Modeling

A major advancement with DFT is the identification of charge redistribution at the interfaces and BIEF. The findings of DFT calculations determined that the joining interface of g‐C3N4/TiO2 undergoes charge redistribution. The surface of TiO2 acquires a negative charge, while the surface of g‐C3N4 acquires a positive charge. This change led to an electric field at the interface that was favorable to facilitate the transfer of electrons from the conduction band of TiO2 to the valence band of g‐C3N4 or the opposite. It is worth noting that the electrons left behind on g‐C3N4 are strongly reducing and the holes generated on TiO2 are strongly oxidizing. The theoretical indication of direct Z‐scheme configuration rather than ordinary type‐II pathway is provided by calculated band offsets and charge distribution [96]. DFT can further establish the Fermi‐level alignment and the direction of the interfacial electric field. Theoretical calculations of electronic structure and Fermi levels in the Ag3VO4/BiVO4 system indicated that charge redistribution occurs after contact formation due to electrical integration across the Ag3VO4/BiVO4 interface. The Z‐scheme pathway was subsequently supported by experimental radical trapping and EPR measurements. The combination illustrates the complementary nature of computation and experiment: DFT establishes the thermodynamic and electronic basis for interfacial charge transfer, whereas experiment is needed to confirm the photoinduced carrier pathway in practice [97].

It can also be studied in a computational way as an interfacial charge transfer bridge. In a combined theoretical and experimental study, DFT calculations and reactive species analysis were used in the Ag/AgVO3/carbon‐rich g‐C3N4 system to unveil why the Ag component plays the role of an electron transfer bridge in the proposed Z‐scheme architecture. Such modeling can enhance the understanding of electronic coupling between neighboring phases and determine whether an interfacial element is a plausible pathway for selective carrier recombination. Nonetheless, calculated charge distribution should not direct to a Z‐scheme mechanism a priori in the absence of experimental evidence depicting the direction of photoinduced charge migration [98]. Computational modeling could also resolve another essential parameter; the interfacial bonding. An experimental and theoretical investigation into the interfacial S─O bond formation in MnIn2S4/WO3 heterojunction was done. It is proposed that the interfacial charge transfer resistance is reduced due to the presence of covalent interaction, which serves the Z‐scheme carrier transfer pathway. This indicates that DFT can go beyond classical band diagrams and reveal the chemical interactions that alter the electronic coupling at the junction. Still, the presence of an interfacial bond should be regarded as a structural factor negatively impacting charge transfer rather than definitive evidence for a Z‐scheme mechanism by itself [99]. However, static DFT calculations at the SQC level are never meant to yield time evolution—only equilibrium description. The aforementioned limitation has led to an integration of DFT with nonadiabatic molecular dynamics (NAMD), which considers excited‐state carrier transfer and electron–phonon interactions. Using DFT plus NAMD at room temperature identified interfacial charge redistribution and the buildup of a BIEF at a ScP/GeS heterointerface, while time‐resolved simulations revealed an ultrafast interlayer recombination pathway consistent with a dynamically dominant Z‐scheme mechanism. These calculations offer improved mechanistic evidence relative to static band alignment as they address kinetics of photoinduced carrier evolution directly [100].

An identical computational strategy has been employed for 2D direct Z‐scheme systems. Time‐dependent ab initio NAMD simulations on a BCN/In2OS vdW heterostructure predicted a large interfacial electric field and ultrafast charge recombination across the interface, accompanied by competitive individual carrier transfer on a much longer timescale. Consequently, the calculations yield a kinetic basis for differentiating direct Z‐scheme recombination from interlayer type‐II carrier transfer. Notably, this approach indicates that the relative timescales of competing charge transfer pathways can provide a more rigorous mechanistic criterion than static band alignment alone [101]. The assessment of interfacial electronic properties in relation to system structural parameters using computational modeling is useful. DFT calculations in vdW heterostructures SnS2/WTe2 were performed to establish the stacking configuration, the electronic structure, band alignment, optical response, and the photocatalytic energetics. Calculations of this nature can resolve whether the band‐edge positions are thermodynamically compatible with the water splitting reactions and whether a proposed direct Z‐scheme is energetically feasible. However, band alignment and reaction energetics that are predicted should be distinguished from the experimentally demonstrated charge transfer dynamics, especially when such mechanism is implied from theory only [102]. The energetic feasibility of Z‐scheme charge transfer occurring in 2D vdW systems can similarly be evaluated by first‐principles calculations. The DFT calculations predicted low lattice mismatch and suitable electronic structure in the InN/BTe heterojunction. The Z‐scheme carrier transfer pathway electrons (reduction peak) and holes (oxidation peak) remain on the components with stronger reduction and oxidation potential, respectively. The findings demonstrate the ability of computational screening to pinpoint potential heterostructures. Theoretical prediction of a Z‐scheme pathway should thus be considered a mechanistic hypothesis in the absence of explicit experimental evidence such as interfacial charge redistribution or photoinduced carrier migration [103]. DFT and advanced computational methods lead to a multiscale understanding of charge transfer at heterojunctions, from equilibrium electronic structure and interfacial charge redistribution through to excited‐state charge carrier dynamics.

Static DFT helps to determine band offsets, work function difference, Fermi level alignment, charge density redistribution, and electrostatic potential. On the other hand, NAMD and associated time‐dependent methods can give insight into the kinetics and timescales of competing carrier transfer pathways [104]. Nevertheless, predictions from computations must not be used as evidence for a Z‐scheme. The more assurance is provided by experimental evidence such as KPFM, in situ XPS, EPR, SPV, transient absorption spectroscopy (TAS), and time‐resolved photoluminescence (TRPL), the more reliable mechanistic assignment is provided. As such, the DFT‐derived electronic structure combined with experimentally measured charge dynamics provides a more rigorous basis for distinguishing Z‐scheme charge transfer from type‐II or S‐scheme [105, 106].

4. Material Systems and Architectures

4.1. Metal Oxides and Sulfides

Metal oxides and sulfides are used to create ZSHJ photocatalysts because they offer tunability of band structures, stability, and redoxability. They have been widely used in the degradation of pollutants, generation of hydrogen, and selective conversion of chemicals. Ternary heterojunction of ZnO/Fe2O3/g‐C3N4 eliminated sulfonamide in real water and sulfamethazine 3.0 and 2.4 times faster than g‐C3N4 and ZnO/g‐C3N4, respectively. Amorphous Fe2O3 was used to mediate redox reactions between Fe(III)/Fe(II) that inhibited recombination and generated ROS (O2 −, ·OH) [106]. The heterojunctions between TiO2 and CdS were optimized at equal weight ratio, and the yield was more than 10 times that of TiO2 by Z‐scheme transfer; in thin‐film form, the yield was sixfold more [107]. Based on Z‐scheme separation of charges and high conductivity, ZnO/GO composites with UiO‐66 eliminated 81% of tetracycline and 100% malathion in 90 min [108].

This system, which employed a direct Cs2O–Bi2O–ZnO Z‐scheme system, was capable of splitting water in general at 0.92% apparent quantum efficiency (AQE) at 420 nm; this was confirmed by XPS and electron spin resonance (ESR) [109]. Besides remediation, ZnAlFe‐MMO double Z‐scheme specifically converted 98% of PLA into lactic acid after 4 h incubation with ZnAlFe‐MMO catalysis under the influence of reduction of the energy barrier by Fe2O3 [110]. A dual Z‐scheme, hollow defect band‐based Bi2S3/S‐C3 N3/Bi2O3 coupled benzylamine with a yield of 97.6% and 99.4% in solar light that is driven by hollow defect bands and high‐performance charge transfer [111]. CdIn2S4/ZnS nanocomposites delivered H2 evolution of 3743 µmol g−1 h−1 (59.1‐ and 14.4‐fold enhancements over pristine CdIn2S4 and ZnS) using a potent interfacial contact and Z‐scheme separation [112]. In2S3/NU‐1000 provided selective oxidation of sulfides and a simulant detoxification of sulfur mustard, the major active species being (1O2) [113]. The SnS2/ZnIn2S4/kaolinite heterostructure dissolved tetracycline 20.81 times faster than SnS2 and 2.37 times faster than ZnIn2S4 due to the increased adsorption, charge segregation, and light collection [114]. Ag+‐based ZnIn2S4/Bi2S3 attained 89.7% tetracycline degradation (1.87 times higher than that of pristine ZnIn2S4), and ESR was utilized to confirm the transfer of Z‐scheme using O2 − and ·OH radicals [115]. Collectively, the metal oxide/sulfide Z‐systems are highly versatile and can remove contaminants, generate solar H2, and valorize plastics with high activity and selectivity, as shown in Table 3.

TABLE 3.

Representative metal oxide and sulfide‐based ZSHJ photocatalysts and their applications.

Photocatalyst system Synthesis/design strategy Application and performance Reference
ZnO/Fe2O3/g‐C3N4 ZnO grafted on amorphous Fe2O3 matrix, coupled with g‐C3N4 Sulfamethazine degradation: 3.0× versus g‐C3N4, 2.4× versus ZnO/g‐C3N4; complete sulfonamide degradation in real water within 8 h [106]
TiO2–CdS Optimized TiO2/CdS ratio, thin‐film design >10× H2 yield versus TiO2; thin‐film mode: 6× higher H2 production; Z‐scheme confirmed by radical trapping [107]
UiO‐66@ZnO/GO, UiO‐66@TiO2/GO MOF–metal oxide/graphene oxide heterojunction Tetracycline (81%) and malathion (100%) degraded in 90 min; efficient charge transfer and broadened absorption [108]
Cs2O–Bi2O3–ZnO Solution combustion method Overall water splitting; AQE = 0.92% @ 420 nm, no cocatalyst/sacrificial agents [109]
ZnAlFe‐MMO (flower‐ball morphology) Ternary oxide double Z‐scheme 98% PLA converted to lactic acid with ~100% selectivity in 4 h visible light [110]
Bi2S3/S–C3N4/Bi2O3 Sequential adsorption, pyrolysis, sulfidation Benzylamine conversion 97.6%, imine selectivity 99.4% in 4 h solar irradiation; hollow defect band structure [111]
CdIn2S4/ZnS One‐step hydrothermal method H2 evolution rate: 3743 μmol g−1 h−1 (59.1× CdIn2S4; 14.4× ZnS); confirmed Z‐scheme by VB‐XPS, Mott–Schottky, EPR [112]
In2S3/NU‐1000 Hybrid with MOF framework Selective sulfide → sulfoxide oxidation under full‐spectrum LED at RT; detoxification of sulfur mustard simulants [113]
SnS2@ZnIn2S4@kaolinite (SZK) Layered heterostructure with kaolinite TC degradation rate k = 0.0231 min−1 (20.8× SnS2; 2.37× ZnIn2S4); pathways by HPLC–MS [114]
Ag+‐doped ZnIn2S4/Bi2S3 Composite nanospheres with Ag+ doping 89.7% TC degradation (1.87× ZnIn2S4); Z‐scheme via O2 − and •OH radicals [115]

4.2. Carbon‐Based Semiconductors (g‐C3N4, Graphene, Carbon Nanotubes, Reduced Graphene Oxide)

Graphene, rGO, CNTs, and g‐C3N4 are carbon‐based semiconductors, and they are commonly used as Z‐scheme photocatalysts since they have tunable band structures, large surface area, and high electron mobility, enabling them to separate and transfer charges to degrade pollutants and generate hydrogen. Microwave‐irradiated 2D RGO@g‐C3N4/BiVO4 composite was found to be dual purpose in terms of H2 production and degradation of tetracycline. Genesis H2 was produced in amounts of 6600 µmol g−1 h−1, 10 and five times that of g‐C3N4 (660 µmol g−1 h−1) and BiVO4 (1220 µmol g−1 h−1): Photocatalyst degraded 92% tetracycline in 50 min at k = 0. 0982 min−1, about 15 times quicker than pure g‐C3N4 and BiVO4, as a result of the simultaneous charge transfer of BiVO4, rGO, and g‐C3N4 [116]. A ternary AgI/CuBi2O4/AgBr Z‐scheme showed 99.47% RhB degradation in 60 min in the presence of visible light, 120 times higher than discrete components, and 83.9% activity remained after three cycles. Electron transfer at AgBr/CuBi2O4 to AgI CB was measured using a mechanistic experimental system, with an excitation‐driven reaction yielding most importantly ·O2 − but inhibiting photocorrosion [117]. Pristine g‐C3N4 has a poor conductivity as well as a fast recombination; strategies to overcome this include doping, heterostructure design, and surface modification. CdZnS/g‐C3N4 and ZnIn2 S4/g‐C3N4 exhibited 2.75 and 1.9 times more RhB degradation than g‐C3N4, respectively. The addition of Co3O4 increased photocurrent, Ag doping the separation of the e− and h+, Ag Cl/g C3N4 the activity of the visible light, and carbon quantum dots (CQDs) the charge transfer, reducing bandgaps and improving the pollutant removal [118].

In addition to remediation, Z‐scheme photocatalysts that are based on carbon aid in storing energy. P‐g‐C3N4/Fe3O4 nanocomposite exhibited a high Fe–C interaction, superparamagnetism, and a capacitance of 3470 mF cm−2 at 3 mA cm−2 with 74.1% remaining after 1000 cycles [119]. g‐C3N4/Co3O4 carbon‐modified biomass and magnetic recovery were used in combination [120]. CQDs in g‐C3N4/BiVO4 reached 85.7% benzyl paraben removal at visible light by acting through the contribution of •O2 − and ·OH [121], whereas NCQDs/BiVO4 enhanced RhB degradation by promoting charge separation [122]. In the case of solar‐to‐fuel conversion, a g‐CN/Ag/Ag3PO4‐AgPd photocatalyst exhibited a turnover frequency of 2107 µmol g−1 h−1 dehydrogenation of formic acid under LED light at 50 °C [123]. An improved pCN/WFB/BiVO4 composite was able to reduce Cr (VI) and degrade RhB at the same time, which was catalyzed by the electron transport through biochar and an effective separation of charges [124].

4.3. Bismuth‐Based Compounds and Oxyhalides

Bismuth‐based semiconductors and oxyhalides are promising Z‐schemeless photocatalysts because they absorb visible light, are chemically stable, and have an appropriate band structure to achieve the separation of charges to be used in the environment and to generate energy. The synthesis of MoS2/Bi2WO6 (MB) heterostructures by in situ growth revealed morphology‐dependent activity; MB‐9 was able to degrade RhB (90 min) and inactivate P. aeruginosa (60 min), with h+ and O2 − as the most prevalent species [125]. Atrazine was degraded by CdS/BiOBr/Bi2O2CO3 combusted by hydrothermal means at a rate of over 95% in 30 min through a two‐step Z‐system mechanism and was less cytotoxic [21]. The 2D/2D Bi3TiNbO9/BiOBr heterojunction had a k = 0.0228 min−1 that was 6.5 and 1.5 times higher than Bi3TiNbO9 and BiOBr, respectively, with the help of DFT and active species analysis [126]. Thioacetamide‐optimized electrospun Bi2S3/BiFeO3 nanofibers were more active than either of the components and followed a direct Z‐scheme mechanism [127].

IO3 −/I− as a charge channel was used in 3D BiOIO3/Bi5O7I microspheres, with 98.9% removal of BPA in 60 min; degradation pathways were explained by DFT and liquid chromatography–mass spectrometry (LC–MS) [128]. AgI/Bi24 O31Cl10 reduced 85.36% Cr(VI) and degraded 78.26% tetracycline in 1 h with recyclability, and the Z‐scheme process was confirmed by ESR [129]. The flux method resulted in Bi4NbO8 Cl oxyhalide, which had plate‐like morphology and was three times more active in O2 evolution and when combined with Ru/SrTiO3: Rh and Fe3+/Fe2+ redox mediator allowed overall water splitting [130]. The heterostructures between BiOM2O3 and 2D/2D Bi2O2CO3/Bi4O9Br2 nanosheets demonstrated that I‐doping increased Type‐I to Z‐scheme systems and raised the capacity of the system to remove NO8 [131, 132]. Bi5O7I/UiO‐66‐NH2 heterojunction eliminated 96.1% ciprofloxacin in 120 min under white light; redox potential and environmental safety were preserved using ESR and DFT [133].

4.4. Perovskites and Emerging 2D/van der Waals Heterostructures

Heterostructures based on perovskite and 2D vdW materials have long been considered versatile platforms for Z‐scheme photocatalysis due to their atomic thickness and tunable electronic structures, as well as the high carrier mobility and broad light absorption. In addition, chemical modification of interfaces allows control over interfacial charge transfer processes. The use of layer‐structured materials has become increasingly important for effective charge transport and photocatalytic conversion due to the promises presented by, for example, accelerated surface phenomena through the otherwise small interfacial area in combination with Stringent control over electrical and optical properties and numerous opportunities regarding defect/chemical functionalization. These features are important for Z‐scheme architectures. In Z‐scheme architectures, interfacial electronic coupling and band alignment are required to provide selective charge recombination and simultaneously retain the strongly reducing and oxidizing carriers required for water splitting, CO2 reduction, and pollutant degradation. However, the actual use of 2D types of photocatalysts is restricted due to factors involving interfacial stability, scalable synthesis, reproducibility, and efficient charge transport during operation [134]. The stability, direct bandgaps, high carrier mobility, and strong visible–UV absorption of BAs/Janus MXY (M = W; X/Y = Se, Te) heterostructures and BAs/WTeSe (with Se vacancies) in particular were very encouraging. Ti2CO2‐WSe2 bilayers exhibited long carrier lives (1.13–1.22 ps), allowing efficient Z‐scheme transfer as well as spontaneous HER/OER in the absence of cocatalysts [135]. LiInP2S6/XTe2 (X = Mo, W) vdW systems were shown to exhibit indirect‐to‐direct band transitions, visible absorption, and mobilities as high as 4.21 × 103 cm2·V−1·s−1 and interfacial fields that favored water redox reactions [136]. MX2/MSSe (M = Ge, Sn; X = S, Se) heterostructures had intrinsic electric fields, tunable bandgaps, broad absorption, and mobilities of 104 cm2·V−1·s−1; in particular, T‐phase Sn‐based structures preferred spontaneous water splitting [137]. Besides, g‐ZnO/SnXY (X, Y = S, Se) strain and electric field engineered attained high solar‐to‐hydrogen efficiency at different pH, and near‐free‐electron states improved carrier transport [138].

Z‐schemes also make use of perovskite heterostructures. It was demonstrated that LaFeO3/g‐C3N4 p–n systems exhibited 16.9‐ and 7.8‐fold improved Brilliant Blue degradation relative to the untouched g‐C3N4 and LaFeO3, respectively [139]. LaFeO3/In2S3 heterojunctions were able to realize degradation rate constants of 0.16709 min−1 (RhB), 0.02684 min−1 (TCH), and 0.0175 min−1 (BB) through the ROS trapping and work function modulation [140]. Narrowed bandgaps, an increased surface area, and effective dye degradation by the h+, ·O2 −, and ·OH pathways were observed in SrTiO3/g‐C3N4‐Ag composites as a result of scavenger tests [141]. Bi co‐sharing resulted in the production of lead‐free Cs3Bi2I9/Bi2WO6 heterojunctions, exhibiting direct Z‐scheme transfer and fourfold improvement of CO2 to CO conversion rate over Cs3Bi2I9, combining rational design with high photocatalytic rate [142].

Figure 3 indicates the representatives of perovskite and 2D/vdW Z‐schemes: (a) atom and band structures of 2D SnC and SnS, indicating their semiconducting properties and the potential to serve as components of a vdW Z‐schemes [143], (b) vdW heterojunctions using Ga2Se monolayers with GaP, PtSSe, and SnSSe monolayers under one of the arrangements, which showcase enhanced pollutant degradation under sunlight [144], (c) band mapping of GaN/g‐C3N4, revealing position of band edges that can be used to decompose water by Z‐scheme charge transfer [145], (d) type‐II versus direct Z‐scheme charge transfer processes in NiMoO4 /ZnFe2O4, which demonstrated an improved rate of pollutant degradation by sunlight [146], and (e) MAPbI3 and Z‐scheme MAPbI3/Fe2O3 structural configurations and molecular dynamics simulations, which showed better interfacial stability and charge transfer for photocatalysis [147].

FIGURE 3.

FIGURE 3

(a) Atomic structures and band structure of 2D SnC (a,b) and SnS (c,d), which shows the characteristics of a semiconductor and its possible usage as a vdW heterostructure component, Z‐scheme [143]. (b) Ga2Se monolayer‐based vdW heterojunctions with monolayers of GaP, PtSSe, and SnSSe with various stacking patterns and configurations as potential Z‐scheme potential Z‐scheme photocatalytic applications [144]. (c) Band alignment of GaN and g‐C3N4 showing band edge positions and possible position of a ZSHJ to split water photocatalytically [145]. (d) Type‐II and direct ZSHJ mechanisms in NiMoO4/ZnFe2O4, using comparison to illustrate the charge transfer pathway and increased degradation in pollutants when under a sun under sunlight [146]. (e) Structural configurations and molecular dynamics simulations of MAPbI3 and Z‐scheme MAPbI3/Fe2O3 heterojunctions, which exhibit enhanced interfacial stability and charge transfer to photocatalytic use [147].

4.5. Ternary and Quaternary Z‐Scheme Systems

The secondary tasks of photocatalysis are high photoelectric conversion efficiency and great redox ability that have not been reached yet. The solution to this lies in ternary and quaternary ZSHJs that allow the rapid charge separation, long carrier lifetimes, and a wide range of visible‐light absorption. An UV‐irradiated O‐g‐C3N4/Zn2SnO4N/ZnO heterojunction demonstrated enhanced dye and NO degradation as a result of two in‐built electric fields and interfacial bonds [148]. A ternary heterostructure of CdS/BiOBr/Bi2O2CO3 synthesized by hydrothermal method demonstrated atrazine degradation in excess of 95% within 30 min, and a two‐step Z‐scheme mechanism as reported by photoelectrochemical and radical trapping studies [21]. Similarly, g‐C3N4 at Bi/BiOBr hierarchical composites [149], Ag3PO4/AgBr/g‐C3N4 dual Z‐scheme systems [150], and CN/MS/BOC (g‐C3N4 /MoS2/Bi24O31Cl10) heterojunctions [151] had improved carrier separation and photocatalytic degradation of antibiotics and dyes via indirect or dual Z‐scheme transfer.

These benefits are extended by quaternary systems. The RhB removal efficiencies of CuO–CuS–ZnO–ZnS nanocomposites were 34 and 2.9 times greater than pristine CuO and ZnS, with 99.17% sulfamethoxazole removal at a k value of 0.0380 min−1 occurring through the use of two‐step Z‐scheme transfer [152] and 99.17% removal at 0.0380 min−1 in CuO/Cu2O/Cu [153]. The ZnO @ZnS/Ag2S system had high H2 evolution (140.3 µmol g−1 in 5 h), which is higher than the binary and ternary systems [154]. The BiOBr/Bi2O3 bare or Ag/AgBr‐decorated photocatalysts were found to provide almost absolute degradation of tetracycline, methyl orange, and rhodamine B due to synergistic plasmonic as well as Z‐scheme effects [155]. Polymorphic chalcogenides of ZnIn2S4 further underscore the significance of structural control in improving Z‐scheme photocatalysis, all hexagonal polymorphs of which have a preferred band alignment to water redox reactions [156].

5. Synthesis and Interface Engineering Strategies

5.1. In Situ Growth and Heteroepitaxy

MOF‐based heterojunctions can provide an alternative pathway for regulating interfacial charge transport as their porous architectures, tunable coordination environments, and chemically adjustable linkers allow the simultaneous control of surface adsorption, electronic structure, and interfacial contact. The recent advances in porous materials show that rational control of pore architecture, framework composition, defect chemistry, and interfacial connectivity are required to transform high surface area into efficient charge separation and photocatalytic conversion. In Z‐scheme architectures, these structural parameters should accordingly be assessed in conjunction with band alignment and interfacial electronic coupling rather than regarded as simply factors that enhance surface area. The integration is needed for CO2 conversion, water splitting, H2O2 generation, pollutant degradation, etc., where mass transport and interfacial carrier migration operate simultaneously [157]. The 94.8% and p‐nitrophenol removal rates of the 2‐g heterojunction 2–3 and 4‐B‐Bi2O3 were found to be 7.1 times higher than that of the individual components, confirming Z‐scheme transfer [158]. Similarly, V2O5/g‐C3N4 systems were found to be 713 times more active with several dyes than parent systems and ESR and trapping measurements verify that these systems retain effective separation of carriers [159].

Heterojunctions of hydrothermal CuInS2/Bi2WO6 exhibited an enhanced TCH degradation in pharmaceutical wastewater with a greater than threefold improvement and 90.5% chemical oxygen demand (COD) removal with good stability [160]. SnS2/BiOBr too showed rapid charge transfer with h+ and ·O2 − dominating in RhB degradation [161]. Large solar‐to‐chemical conversion has also been made possible by heteroepitaxy. ZnO/CdS heterostructures were regrown by two‐step epitaxy, and it gave 669.6 μmol g−1 h−1 H2 [100 mg] without any cocatalysts, and also, it was very stable [162]. MOF‐on‐MOFs, such as MIL‐88B(Fe)/UiO‐66‐NH2, were claimed to achieve nearly 100% CO‐to‐CO selectivity [163] and MIL‐88B(Fe)/UiO‐66(Zr)‐NH2 nearly 0.9% overall water splitting [164]. Compared to ZnO and ZnO–Au, ZnO–Au@CdS nanorod arrays prepared by a vectorial Z‐scheme design were 79‐ and 28‐fold higher activity in selective nitro reduction and had a high recyclability [165]. Likewise, the Au nanorod‐covered SnO2/TiO2 nanorods improved two‐electron O2 reduction through LSPR‐mediated vectorial delivery (Au–TiO2–SnO2–Au) [166]. The combination of these results confirms that in situ growth and heteroepitaxial approaches provide strong interfaces and effective charge transportation, as shown in Table 4, which allow conversion of sustainable energy and remediation of the environment.

TABLE 4.

Representative in situ growth and heteroepitaxial ZSHJ photocatalysts and their applications.

Photocatalyst system Fabrication strategy Application and performance Reference
Bi7O9I3/g‐C3N4 In situ growth on ultrathin g‐C3N4 Doxycycline degradation; oxhydryl and O2 − as main species; stable and recyclable [157]
β‐Bi2O3/g‐C3N4 (0.5BC) In situ growth; nanosheets coating g‐C3N4 RhB (94.8%/120 min) and p‐NP (71.6%/300 min); k = 5.8–7.1× higher than single components [158]
V2O5/g‐C3N4 (VC1.0%) In situ solid‐state growth Degradation of RhB, TC, MO, MB; efficiencies 7.3× versus g‐C3N4, 13× versus V2O5 [159]
CuInS2/Bi2WO6 In situ hydrothermal growth TC degradation >3× CuInS2; COD removal 90.5% in real wastewater; excellent stability [160]
SnS2/BiOBr In situ growth of BiOBr nanosheets on SnS2 RhB degradation; h+ and O2 − as dominant active species; improved charge transfer [161]
ZnO/CdS Two‐step heteroepitaxial growth (anion exchange) H2 production 669.6 μmol h−1 (100 mg); cocatalyst‐free; stable 72 h [162]
MIL‐88B(Fe)/UiO‐66‐NH2 MOF‐on‐MOF heteroepitaxial lattice growth CO2 → CO photoreduction (100% selectivity; 2.26 μmol g−1 h−1) [163]
MIL‐88B(Fe)/UiO‐66(Zr)–NH2 Face‐selective epitaxial growth Overall water splitting; AQY ≈ 0.9% (400–450 nm) [164]
ZnO–Au@CdS nanorod arrays Heteroepitaxial core–shell nanorod growth Selective reduction of nitro compounds; 79× ZnO, 28× ZnO–Au; stable and recyclable [165]
Au/[SnO2–NR#TiO2] Heteroepitaxial SnO2/TiO2 nanorods + Au NPs Two‐electron O2 reduction; vectorial electron transfer via Au–TiO2–SnO2–Au; high efficiency [166]

5.2. Atomic Layer Deposition and Thin‐Film Engineering

By the atomic layer deposition (ALD) and thin‐film engineering, interfaces, thickness, and composition can be controlled and thin‐film heterojunctions can be engineered to be Z‐schemed with enhanced charge separation and light absorption and recoverability. ALD synthesis of a TiO2−x /Cu/ZnO heterojunction and spray pyrolysis (without noble metal cocatalysts) showed a high level of SPR absorption and high H2 evolution (342.0 µmol g−1 h−1) [167]. ZnS QDs deposited using ALD on g‐C3N4 increased the activity 2.6‐fold, with the best deposition cycles reducing recombination [168]. On the same note, 3D ZnO on 2D g‐C3N4 demonstrated 98.9% cephalexin degradation with h+ and ·OH as the prevailing species [169].

Heterojunctions of Ta3N5WO2.72 prepared through ALD sol–gel increased the H2 yield by up to 10‐fold relative to Ta3N5 and increased it by >10‐fold relative to Z‐schemes in the liquid state [170]. Oxygen vacancies and internal electric fields facilitated the degradation of levofloxacin 89% within 30 min with the assistance of the SiO2/TiO2/Bi2WO6 heterojunction [171]. g‐C3N4/TiO2 multilayers immobilized on glass were found to have high stability and efficiency in RhB and TCH degradation [59].

Thin films that were prepared using SILAR CdS/BiOI/WO3 had 98.3% MB degradation with a 118.4 times faster kinetics compared to WO3 [172]. The bilayers of TiO2/BiVO4 with Bi nanoparticles used modified SPR and Z‐scheme transfer in RhB degradation [173]. Photoanodes made of CN‐BiVO4/WO3 showed 14.8% incident photon‐to‐current efficiency (IPCE) at 390 nm and improved stability [174], and FeO x /g‐C3N4 thin films (PLD‐grown) were strong in terms of photo‐Fenton and photocatalytic ciprofloxacin degradation [175]. All in all, ALD and thin‐film engineering provide accurate structural control and interfacial optimization, which allow efficient, stable, and recyclable Z‐scheme photocatalysts to be used in energy and environmental use cases.

5.3. Defect/Vacancy Customization and Surface Functionalization

Defect engineering and surface functionalization can greatly overcome the drawbacks of ZSHJs, improving light absorption, charge separation, and surface reaction kinetics, especially in 2D materials with large surface area and high density of active sites. In situ grown ultrathin ZnIn2S4/g‐C3N4 heterojunctions demonstrated effective H2 evolution in the absence of Pt with DFT and spectroscopy, showing that charge separation was the crucial parameter [81]. G‐C3N4/C‐TiO2 composites reported oxygen‐vacancy‐assisted transfer with six‐ to sevenfold higher RhB and phenol degradation compared to TiO2 [176]. Surface‐modified g‐C3N4/ZnSe was better at adsorbing and transferring CO2, with selectivity of 88% to CO (439 µmol g−1) and CH4 (203 µmol g−1) [177].

Binary Bi2WO6/TiO2 was able to produce H2 at 12.9 mmol/g−1 h−1, 129‐fold higher than TiO2 [178], and Bi2 MoO6/BIOBr demonstrated 4–7 times greater MB degradation rate (K ap p = 0.0539 min−1) [179]. AgI/Ce‐2MI nanocomposites were able to reduce over 90% Cr(VI) in the view of the visible light, and •O2 − was confirmed to be produced through ESR [180]. B‐BiVO4/Bi2MO6‐β systems with recombination suppressed were obtained by co‐doping and by two‐phase modulation [181]. The incorporation of cocatalysts enhanced the performance even more: Ternary TiO2/g‐C3N4/NiCoP double Z‐schemes provided 2305.5 mmol/g−1 H2 removal and 86.2 Cr(VI) removal in 2 h [182]. AgI/Bi2WO6 (20 wt% AgI) exhibited a 5.4‐ and 3.3‐fold higher tetracycline degradation than Bi2WO6 and AgI, respectively, which is facilitated through the formation of in situ Ag nanoparticles [183]. Hence, carrier dynamics, expansion of light harvesting, and surface reactivity are effectively controlled using defect/vacancy tailoring and surface functionalization to improve Z‐scheme photocatalysts in solar fuel generation and environmental cleaning.

5.4. Noble Versus Earth‐Abundant Mediators

Noble metals (Pt, Au, Pd) are good HER cocatalysts but are costly and scarce, and there is research on earth‐abundant alternatives. An efficient H2 evolution of a ternary Bi/Bi5O7I/Sn3O4 photocatalyst which does not contain noble metals, via direct Z‐scheme charge transfer, was enabled by Bi, which extended the absorption and acted as a cocatalyst [184]. Fe3O4@NiFe2O4/P‐doped g‐C3N4 (M @NFOPCN) produced 924 µmol h−1 of H2 and twofold Z‐scheme separation Z‐schemes and electric field effects doubled the degradation of ciprofloxacin [185]. S‐deficient CoS/CdS nanoplates generated 39.29 mmol·g−1 h−1 of H2 with 14.5% AQY at 400 nm, which was superior to 3 wt% Pt ‐CdS [186].

Composites of TiO2–Cu@C employed carbon dots as the mediator and yielded 3911 µmol g−1 h−1 of H2 [187] and CuInS2/CNx–CNx with Au plasmonic enhancement with 10.72 mmol g−1 h−1 of H2 [188]. At 500 nm, Cu 3P‐CNTs were 17.22 mmol g−1 h−1 with 10.23% AQE [189], and BP/MoS2 and BP/WS2 heterojunctions had high solar‐ and NIR‐driven H2 generation [190]. Z‐schemes of engineered black TiO2 and TiO2/‐C3N4 were improved in visible‐light quantum efficiency [191]. Pt‐decorated TiO2 heterojunctions reached 45.6% AQY at 365 nm, and noble metal efficiency but low‐cost alternatives were urgently needed [191]. TMDs (MoS2, WSe2) presented conductive and stable cocatalysts; nanosheets of WSe2 on CdS nanorods enhanced the charge separation and H2 activity [192]. Metals that were abundant in the earth also promised, Sn/TiO2 photocatalyst generated 553.1 µmol·g−1·h−1 of H2, 43.9‐pure TiO, with Sn serving as an electron sink and H2 generation site [193]. On the whole, earth‐abundant mediators (Ni, Co, Cu, Fe, Bi, Sn, TMDs) provide competitive or even better performance in HER, which is scalable and sustainable as an alternative to noble metals in Z‐scheme photocatalysts.

5.5. Polymetric and Organic Linker‐Based Methods

The applications of polymeric and COFs are so vast that they can be tailored to tune photocatalytic interfaces. The molecular backbone, linkage chemistry, pore structure, π‐conjugation, and D–A configuration can be designed deliberately to modify light harvesting, charge mobility, interfacial coupling, and catalytic site accessibility. In comparison to traditional inorganic semiconductors, COFs offer control of electronic structure and porous environments at the molecular level, allowing for the photothermal response to be tuned through linker selection, functional group incorporation, framework topology, and heterojunction construction. These features are particularly pertinent to Z‐/S‐scheme architectures, where the interface must allow for selective carrier transfer at the same time as retaining the high‐energy electrons and holes required for reduction and oxidation processes. Therefore, the photocatalytic advantage of COF‐containing heterojunctions cannot be ascribed solely to their extensive surface area; instead, a correlation among framework structure, interfacial electronic coupling, carrier dynamics, and reactant transport should be established for a quantitative structure–activity relationship [194]. In situ growth strategies that directly control the contact between the two semiconductor phases further illustrate the significance of intimate interfacial architecture. For instance, ZnCo2O4 was anchored on ZnO with the help of an in situ growth process to obtain a ZnCo2O4/ZnO S‐scheme heterojunction. The composite exhibited improved visible‐light response and carrier transfer properties for 92.64% inhibition of E. Compared to pristine ZnO, the degradation of ZnO@MnO2‐10 is more efficient [195]. SrTiO3/g‐C3N4‐Ag composites had lower bandgaps and total methylene blue degradation through a Z‐scheme pathway [141]. CPDs/Bi4O8Br2 (8 wt%) produced 132.42 µmol g−1 h−1 of CO, 5.43 times greater than pure Bi4O8Br2, through the up‐conversion of wavelengths above 580 nm [196]. A heterostructure made of g‐C3N4 and alpha‐Fe2O3 was effective in removing 90% of HPAM present in wastewater because of effective interfacial charge transfer to produce ·OH radicals [197]. Also enhanced performances are linkers‐aided quantum dot (QD) decoration. CdS‐Bi2S3/KNbO3 using starch/thioglycolic acid linkers increased phenol degradation [198], and CdS‐Bi2S3/NaNbO3 had a low onset potential [199]. Under the light of visible light, the Au–CeO2/PCN possesses composites with a rate of H2 of approximately 80 µmol h−1 of H2 [200]. On the same note, organic linkers provided faster electron transfer: CdSe QDs–TiO2 with para‐4MBA exhibited better charge transfer efficiency than ortho/meta analogs [201], and DMSA‐based CuS/TiO2 had consistent TiO2@CuS core/shell structures with increased photocatalytic activity than direct deposition protocols [202].

In general, polymeric and organic linker‐based methods provide control over band deployment, strong interfaces, and design flexibility in Z‐schemes to convert solar fuel and clean up the environment. Figure 4 shows some representative systems: (a) PANi/ZnO composites contrasting type‐II and Z‐scheme charge transfer [203], (b) demonstrating the ability to promote photocatalysis through polymer [204], (c) demonstrating the ability to promote contaminant degradation through heterojunction [205], and (d) demonstrating the ability to promote tetracycline hydrochloride degradation with sunlight [206].

FIGURE 4.

FIGURE 4

(a) Diagrammatic comparison of the type‐II and Z‐scheme charge transfer mechanisms in PANi/ZnO composites, showing improved photocatalytic behavior of polymer‐assisted heterojunction design [203]. (b) Z‐scheme charge transfers at PCN/α‐Fe2O3 heterojunction by CNTs with efficient separation of charge carriers and promoted photocatalytic degradation of organic pollutant [204]. (c) The band positioning and charge transfer mechanism of Sb2S3/Bi2MoO6 heterojunction, which shows efficient carrier movement and degradation of organic contaminants under the sun irradiation [205]. (d) Z‐charge transfer mechanism in BWO/PCNS heterojunction at the visible light, which exhibits efficient electron–holes separation and TC‐HCl photocatalytic degradation [206].

6. Advanced Characterization Techniques for Mechanistic Validation

6.1. Steady‐State and Time‐Resolved Photoluminescence (PL)

PL spectroscopy time‐resolved and steady‐state are needed to investigate the dynamics of the charge carriers in ZSHJs, and a direct correlation of the carrier lifetimes and separation efficiency to photocatalytic performance is required. To generate hydrogen using solar energy, CoTiO3/TiO2 heterostructures exhibited improved carrier lifetimes as indicated by UPS and UV–vis, which illustrated a direct Z‐scheme reaction and high hydrogen evolution capability. Performance was also further optimized by temperature modulation, which proposed the possibility of thermophotocatalytic reactors [207]. Only static band structure data cannot provide the real direction and kinetics of charge transfer. A complete mechanistic assignment must therefore include complementary characterization of the equilibrium electronic structure, interfacial charge redistribution, photoinduced carrier migration, and reactive species formation. Among others, core‐level shifts induced by illumination can be tracked by ISIXPS and thus provide direct information on changes in surface electron density, while KPFM provides spatially resolved work function and surface potential information associated with interfacial charge redistribution. By resolving the temporal evolution of excited‐state carriers, fs‐TAS complements these techniques. EPR identifies the reactive radical species produced by surviving redox‐active carriers. Recent studies of COF‐based S‐scheme photocatalysts show that ISIXPS, KPFM, fs‐TAS, as well as DFT analyses provide significantly stronger mechanistic evidence than a single band diagram or photocatalytic activity measurement [208]. Oxygen vacuum heterostructures between BCN and TiO2 also gave longer visible absorption and carrier lifetimes with H2 evolution rates 711 times longer than in TiO2 and BCN [209]. Composites of COF‐366‐Co/UiO‐66‐NH2 exhibited long lifetimes and delocalization with the generation of CO2 photoreduction rates of 4092 µmol g−1 h−1 With 2.4% quantum yield at 400 nm [210]. To reduce oxygen, UiO/IKCN heterojunctions produced H2O2 at 72.6 mM g−1 h−1 with 10.28% AQY at 420 nm. Z‐scheme charge transfer was validated using PL, transient absorption, and DFT [211]. Mediator‐free Ag3VO4/BiVO4 microspheres used built‐in fields, and they last longer and allow reduction of Cr6+ by 74.9% and oxidation of bisphenol S by 94.8% [4]

Even 0D/2D systems increased Z‐scheme transfer: Bi3TaO7 QDs/g‐C3N4 exerted ciprofloxacin degradation 4–12.2 times higher than that of individual components [212], and ZnS/ZnIn2S4 with interfaces induced by microstrains increased CO2 reduction efficiency [213]. Methylene blue degradation was 2.5–2.7 times more effective in composite WO3/g‐C3N4 systems than in pure components and was confirmed by PL to be efficiently separated [214]. Equally, g‐C3N4/Bi4NbO8Cl heterojunctions prepared by ball milling showed H2 evolution rates of 6.9–67.2 higher than those of single phases [215]. In general, the Z‐scheme charge transfer is established in PL studies to show the significance of heterojunction design and interface engineering, as well as mediator strategies, to achieve the maximum efficiency in the production of solar fuel and the removal of pollutants.

6.2. Transient Absorption Spectroscopy (Ultrafast to Microsecond Scales)

TAS is a technique that shows carrier lifetimes, carrier mobility, and recombination at ZSHJs and directly relates dynamism to photocatalytic performance. Hot‐electron transfer between g‐C3N4 excitonic states to ZIS took place in CN/ZnIn2S4 within sub‐ps, faster than that of band‐edge transfer and enhancing H2 evolution rate [216]. BiVO4V2O5 photoanodes had longer carrier lifetimes and a slower recombination rate, and the holes were trapped in BiVO4, proving type‐II recombination suppression [217]. In shallow traps, C3N4 crystal exposed 59.5% of the electrons to Pt in 1.6 ps (compared to 21.3% at 11.8 ps for pure C3N4), allowing 28‐fold higher evolution of H2 [218].

Mixed perovskite heterojunctions also proved to be advantageous: FAPbBr3/Bi2WO6 was able to transfer charge in ultrafast IR‐TAS, improving CO2 reduction 8.3‐fold over CsPbBr3, with simultaneous oxidation of benzyl alcohols [219, 220]. CoNiHHTP MOF/PHI in environmental sensing, Z‐scheme transfer, and bimetallic reaction contributions were demonstrated with a 1 ppb NO2 detection limit with fast response, TAS, and in situ measurements were consistent with CoNiHHTP MOF/PHI [221]. On the same note, WO3/TiO2 core shell heterojunctions displayed microsecond scale separations with electron transfer (WO3/TIO2) and hole transfer (TiO2/WO3), which allowed the effective degradation of stearic acid [222]. Surprisingly, In2O3‐cube/g‐C3N4 systems localized hot spots were generated, with ultrafast coupling and shallow‐trap lifetimes enhancing 34‐fold increased H2 production [223].

Carrier dynamics were also optimized using doping solutions: RhTiO3‐La and RhTiO3‐codoped SrTiO3 exhibited Rh3+:STO transfer in 1.6 ps and quantum yield of 14.7% [224]. In a similar way, CdIn2S4/NC/MoC heterojunctions optimized trap states, and a 58.2‐fold increase in H2 evolution was confirmed by fs‐TAS [225]. Taken together, TAS in the ultrafast‐to‐microsecond regime offers important information about charge generation, migration, and recombination in Z‐scheme photocatalysts, as is the case in Table 5, and that can guide the rational design of systems that work with solar fuels and pollutant remediation.

TABLE 5.

Summary of TAS insights into charge carrier dynamics in ZSHJ photocatalysts.

System/heterojunction TAS findings Photocatalytic/functional outcome Reference
CN/ZnIn2S4 (ZIS) Sub‐ps migration of hot electrons from g‐C3N4 to ZIS; trap‐state mediated electron delocalization Enhanced H2 evolution efficiency [216]
BiVO4/V2O5 (Type II) Prolonged carrier lifetimes; trapped holes mainly in BiVO4 Improved photocurrent density, suppressed recombination [217]
Crystalline g‐C3N4 versus pristine Faster electron transfer to Pt (59.5% in 1.6 ps vs. 21.3% in 11.8 ps); shallow‐trap assistance 28× increase in H2 evolution [218]
FAPbBr3/Bi2WO6 Ultrafast Z‐scheme charge transfer confirmed CO2 reduction + benzyl alcohol oxidation under solar light [219]
α‐Fe2O3/Amine‐RGO/CsPbBr3 Prolonged carrier lifetime; efficient spatial separation 8.3× enhanced CO2 reduction efficiency [220]
CoNiHHTP MOF/PHI Efficient Z‐scheme charge transfer; bimetallic site synergy NO2 detection limit 1 ppb (fast response/recovery) [221]
WO3/TiO2 core–shell μs‐scale carrier lifetimes; electron transfer WO3 → TiO2 and hole transfer TiO2 → WO3 High photocatalytic efficiency for stearic acid degradation [222]
In2O3‐cube/g‐C3N4 Near‐field coupling creates “hot areas”; extended shallow‐trapped state lifetimes 34× improvement in H2 production [223]
La‐ and Rh‐codoped SrTiO3 Rh valence controls electron lifetime; Rh3+:STO with 1.6 ps transfer, 14.7% QY Efficient electron transfer to Ru cocatalyst [224]
CdIn2S4/NC/MoC Dynamic trap state modulation; optimized interfacial migration 58.2× higher H2 evolution [225]

6.3. Isotopic Labeling and Reactive Species Tracking

The use of isotopic labeling and reactive species scrambling is crucial in the elucidation of charge transfer, active sites, and product origins in Z‐scheme photocatalysts. The heterostructures of BiVO4/Bi2S3 exhibited direct system transfer of Z‐schemes through delocalized electrons and internal fields; MnOx/BiVO4/Bi2S3 selective CO2 to methanol was possible with stoichiometric O2 by isotopic labeling [226]. CoAl‐LDHs with Bi2O3 made visible light fixation of N2 possible (48.7 µmol L−1 h−1); N2 was the source, and Co was the active site, detected by EPR/DFT [227]. CO2 to CH4 (184 µmol g−1) and CO (105 µmol g−1) were also reduced by CsPbBr3/g‐C3N4 nanosheets, with isotopic analyses showing water‐derived H atoms [228]. Standardization of the 15N protocols also provided a high degree of reliability in the studies of N2 fixation [229].

Ternary CNC/Bi/BiOCl produced CO (8.76 µmol g−1 h−1, approximately 100% selectivity); isotopic labeling, DRIFTS, and XPS indicated that the rate limiting step was the production of COOH [230]. Plasmonic Au‐PMTiNTs exhibited wavelength‐dependent CO2 reduction: CH4 (302 µmol g−1 h−1, 89.3% selectivity) reduction under AM1.5G and labeling of ions with 13C verified the plasmonic Z‐schemes pathways [231]. To be degraded, in the case of the pollutants, CDs/g‐C3N4/MoO3 increased tetracycline degradation 46.2 times with scavenging, showing holes as the major species [232]. COF/TiO2 heterojunctions selectively oxidized NO (64.5% removal, 99.9% NO3 −) through ·O2 − radicals and inhibited ·OH [233]. Biochar@ZnFe2O4/BiOBr and g‐C3N4/Bp/MoS2 systems were able to degrade antibiotics effectively, and holes and ·O2 − were proved as the dominant species, as indicated by ESR and LC–MS/MS mapping [234, 235]. LaFeO3/Cs catalyzed the degradation of tetracycline (88.7% in 40 min), using ·O2 −, and ·SO4 −, proven by ESR [236]. In general, the use of isotopic labeling and species tracking can demonstrate the origins of products, reactive intermediates, and interfacial processes, which provide mechanistic confirmation on Z‐scheme designs in solar fuels and pollutant remediation.

6.4. Combined Experimental–Theoretical Approaches

Rational design of ZSHJs involves semiconductors with equal Fermi levels, high absorption in the visible light, and designed interfaces. Simultaneous experimental/theoretical experiments can offer important information on the charge transfer, interfacial reactions, and the photocatalytic reactions. Theoretical predictions of binding energy, carrier migration, and Fermi‐level alignment of V2O5/C3N5 heterojunctions were predicted and then experimentally synthesized. Z‐scheme transfer was verified in situ by XPS and radical trapping, with optimized samples evolving H2 at rates of 329.9 µmol h−1 and 7.21% AQE [237]. The heterojunctions between Ag3PO4 /MIL‐88A(Fe) and tetracycline were combined with Z‐system photocatalysis and photo‐Fenton degradation. Pathway and low toxicity were validated by adjusting Fe2+/Fe3+ ratios, whereas XPS, ESR, LC–MS, and QSAR supported the activity [238]. Zn0.6Cd0.4S/ZnO/g‐C3N4 demonstrated effective degradation of dye and antibiotics (98%–99%), and calculations and radical capture confirmed the dominance of the ·OH and ·O2 resulting [239].

Facet‐engineered Br‐doped Cu2O at NiFe‐LDHs enhanced the catechol degradation (95.7%), which was enhanced by the strength of internal fields and bulk charge separation [240]. In the case of reducing CO2, the reduction of CO and CH4 was 197.8 µmol h−1 and 130.3 µmol h−1 with B‐doped, N‐deficient g‐C3N4 coupled with ultrathin CoPc (CoPc/P‐BNDCN) using defect‐modulated bands and efficient Z‐scheme transfer [241]. The selective mechanism by which CN/CQD/CdZnS heterojunctions cleaved the 36.3 mg/g vanillin and vanillic acid was selective in cleaving the 36.3 mg/g 3‐O‐4 bonds of lignin, accelerated by CQDs [242].

The g‐C3N4/TS‐1 based on zeolites was, in turn, able to degrade Cr(VI) (99.9% in 5 min) or tetracycline (80% in 15 min) with enhanced light absorption and the formation of ·O2 − [243]. Ag2MoO4/BiOBr obtained 93.8% of methylene blue degradation through Z‐scheme carrier transfer mechanism [244]. Heterojunctions of TiO2 and Ga2O3 stimulated the CO2 reduction reaction by 2.5 and 9.6 times, respectively [245]. Ag3PO4/1T@2H‐MoS2 allowed the fast degradation of tetracycline (98.9% in 10 min) by suppressing electron–hole recombination [246]. FWO/BiOCl was dual CO2 reduced (CH4: 4.25, CO: 9.41 µmol g−1 h−1) and bisphenol A degraded, which was further abetted with piezoelectric polarization and oxidants [247]. Together, by combining experiments and theory, correct band alignment, carrier transfer, and reactive species generation can be carefully controlled, which will hasten the design of Z‐scheme photocatalysts to convert solar energy and clean up the environment.

7. Performance Evaluation Metrics and Standards

7.1. Apparent Quantum Efficiency (AQE) and Solar‐to‐Hydrogen (STH) Efficiency

ZSHJs can be used to split water efficiently by utilizing solar energy but can typically be constrained by carrier recombination. Anatase TiO2/g‐C3N4 heterojunctions were hydrothermally synthesized, in which the g‐C3N4 was used as a template of anatase TiO2 enhanced carrier separation and H2 production. Redox mediators coupled with coupling WO3 or BiVO4 and β‐Ni(OH)2 produced AQEs of 4.94% (365 nm) and 4.01% (405 nm) [248]. Recombination was suppressed in a MgTa2O6 xNy/TaON heterostructure by spatial separation and defect elimination, with 6.8% AQE at 420 nm, an order of magnitude higher than both Pt‐TaON and all previous reported powdered Z‐schemes photocatalysts [249].

There is promise as well in QD‐based systems. Zn–AgIn5S8/α‐Fe2O3 recorded 1.7 mmol g−1 h−1 H2 at 450 nm with 7.48% AQE assisted by electrochemiluminescence (ECL), TRPL, and ESR [250]. CdSe/ZnSe heterojunctions gave 15.3 mmol g−1 h−1 H2 with 4.0% AQE at 400 nm [251], and AgBr/HCCN composites improved charge transfer, giving 6% AQE at 410 nm [252]. A ternary system with interfacial bonded‐induced electric fields (CdSe/SL‐ZnIn2S4/MoSe2) provided 70,789 µmol g−1 h−1 H2 and 44.1% AQE at 420 nm [253]. First‐principles investigations of GeS/GeSe, SnC/WS2, and PtS2/g‐C3N4 heterostructures showed the optimal band alignment and interfacial charge redistribution, which allowed the achievement of 31–42 STH efficiencies [254, 255, 256]. STH efficiencies of 32.95% were obtained with 2D systems (SiSe/SnSe2, SiSe/SnSSe, AuSe/SnSe/SnS), and tensile strain and interlayer engineering increased the separation and kinetics [257, 258, 259]. This way, Z‐scheme photocatalysts have developed interface engineering, defect modulation, and dimensional control that have enabled record AQEs and high potential STH efficiencies of sustainable hydrogen generation.

7.2. Product Selectivity in CO2 Reduction and Organic Synthesis

The charge separation, transfer, and product selectivity of g‐C3N4/CuInS2 in CO2 reduction and organic synthesis were significantly higher in two‐metal active site g‐C3N4/CuInS2, which produced 246.75 µmol g−1 h−1 CO with a selectivity of over 93% compared to H2 and simultaneous 100% inhibition of H2 by staggered band alignment [260]. g‐C3N4/FeWO4, a direct Z‐scheme, yields 6 µmol g−1 h−1 CO with a 100% selectivity and 90% of suppression of H2 due to staggered band alignment [261]. Under AM 1.5G, 2D/2D CsPbBr3/Bi2WO6 gave 324 µmol g−1 h−1 electron consumption and 1582 µmol g−1 product yield to produce CO (11.4%) and CH4 (84.3) [262]. Lead‐free Cs2 AgBiBr6 @g‐C3N4 was found to maintain steady CH4 generation through synergistic CB/VB orientation [263]. CH4 was produced by AgCl@ g‐C3N4 (53.03 µmol g−1), acetic acid (6.01 µmol g−1), and formic acid (2.51 µmol g−1) with no mediators [264]. ESR and DFT confirmed that ZnIn2S4/BiVO4 was an efficient CO2 reducer via direct Z‐scheme transfer [265].

CdS/g‐C3N4 was used in gram‐scale organic synthesis to couple benzylamine (199.79 µmol, 90 conversion) to C–N [266]. BiOBr/TzDa COF obtained 97% RhB and Cr(VI) removal [267], and BiOCl/g‐C3N4 transformed benzylamine with a yield of 96.1 and a selectivity of 95.2 [268]. All‐organic HOFs/g‐C3N4 provided H2 evolution (4450 µmol g−1 h−1, AQE 22% at 450 nm) and total MO degradation [269]. CsPbBr3/Au/g‐C3N4 was used to oxidize C–H using Au as a mediator [270]. The combination of rational design of dimensionality, interfacial engineering, and band regulation in Z‐scheme photocatalysts allows selectivity in products to CO2 reduction and various organic transformations.

7.3. Stability and Recyclability Test

Photocatalytic heterojunctions can be practically applied as efficient catalysts if these remain stable with time, meaning they should maintain their structural integrity, retain their catalytic activity and show chemical stability during operation. The recyclability studies offer critical data to evaluate catalyst durability. In addition, structural characterization after the reaction with leaching analysis could distinguish true stability from deceptively retained activity. For instance, a ternary heterojunction of FeNi2S4@MoS2/g‐C3N4 exhibited excellent photocatalytic performance over five cycles of successive use, accompanied by negligible leaching of metals, signifying that the merged structure can retain functionality upon repeated cycles [271]. Similarly, the MCS/AIS photocatalyst exhibited high activity even after five degradation cycles, with no variation in morphology and crystalline structure after scanning electron microscopy (SEM) and XRD characterizations. The inductively coupled plasma mass spectrometry measurements also showed that there is virtually no leaching of Mn, In, and Ag, which is further evidence of chemical as well as structural stability [272].

Strategies for immobilization can improve recovery and resale value of a catalyst. The Ag–ZnO nanoflowers trapped within porous cellulose gel beads sustained stable performance during successive continuous flow operations. The low release of Ag+ and Zn2+ concentrations into the treated water suggests effective inhibition of secondary metals contamination. These immobilized architectures tackle significant practical challenges related to the issue of nanoparticle aggregation and the issue of catalyst separation after treatment. Similar stability is observed for CoFe2O4/Na2Ti3O7, which has been shown to withstand activity degradation over cycles of photocatalytic alcohol oxidation, although it suffers from a lack of quantitative leaching data, and most results evidence performance retention only [273, 274].

Long‐term photoelectrochemical testing serves as a more rigorous stability assessment. The fabricated ZnFe2O4/ZnIn2S4/NiCoP did not lose their activity during the chronoamperometric test for a long time. XRD, SEM, and elemental mapping of this material after testing showed that the as‐fabricated material retains its crystal structure and morphology after testing. Product examination further demonstrated the occurrence of elementary sulfur through the process of photo‐electrochemical sulfur oxidation, while repeated syntheses and stability measurements revealed good batch‐to‐batch reproducibility [275]. In a different system, the structural stability of NiS/PHI‐4 in saline conditions was due to the maintenance of the PHI structure and the suppression of alkali metal loss via cation exchange. Post‐reaction microscopy and diffraction analyses further supported the retention of the catalyst structure, although slight dissolution of NiS was observed [276].

In the case of heterogeneous photocatalysts, stability should also mean more than just retaining a high pollutant‐removal efficiency. The structure of the photocatalyst after recycling indicates that the active heterojunction is retained; metal leaching measurements are particularly critical for having potentially mobile metal components. Previous studies also showed that recycled heterojunction photocatalysts could maintain high degradation efficiencies with little detectable change in their XRD patterns, indicating good structural stability during repeated operation [277]. Similarly, the enhanced charge carrier transport in ternary Ti3C2 MXene/NiFe2O4/VO heterostructures due to closely spaced interfaces is also shown. However, morphological proof alone should not be taken to infer long‐term photocatalytic stability [278].

Recent S‐scheme and Z‐scheme systems further show that interfacial architecture can affect operational stability. A piezo‐photocatalyst constructed of Bi4Ti3O12@PDA/AgIO3 showed that fast charge transfer of the interfacial electrons and the carrier transfer role of the PDA layer enabled efficient separation of carriers and sustained multifunctional activity. However, these observations relate to charge transfer kinetics rather than recyclability per se [279]. The Cd/CdS/g‐C3N4 complex manifested continued performance in environmental remediation through synergy involving both Z‐scheme and Ohmic junction effects. However, mechanistic evidence for charge transfer must be differentiated from direct evidence for long‐term catalyst stability [280].

8. Applications of Z‐Scheme Photocatalysts

8.1. Overall Water Splitting and Hydrogen Production

ZSHJs can be used to produce H2 under sunlight irradiation as they are capable of sustaining high redox potentials with the effective separation of charges. Recombination was hindered by TiO2/g‐C3N4 hydrothermal synthesis to AQEs of 4.94% (365 nm) and 4.01% (405 nm). Redox mediators (I−/IO3 −, Fe2+/Fe3+) are coupled with WO3 or BiVO4 to allow overall splitting of water, further enhanced by loading with 2D/3D Ni(OH)2 [281]. Defects are suppressed in (oxy)nitride MgTa2O6 Ny/TaON Z‐schemes using Pt‐loaded MgTa2 O6 as H2 and PtO8‐WO3 as O2 photocatalysts. They give 6.8% of AQE at 420 nm, or approximately 360 times that of single components with IO3 −/I3‐mediators [249].

Design is also developed in 2D vdW systems. GaSe/ZrS2 is high mobility (approximately 1450 cm2 V−1 s−1), high absorption (higher than 105 cm−1), and strain‐tuned (spontaneous) water splitting efficiency [282]. Direct Z‐schemes with MoSe2/SnS2 and C3 N/WS2 also obtain an efficient separation, high redox potential, and a broad pH range [283, 284]. Hybrid and core shell designs are performance‐enhancing designs. Until now, BiFeO3(TpPa‐1‐COF) synthesizes polarized fields and generates H2 and O2 rates of 1416.4 and 708.2 µmol g−1 h−1 [285]. With no Pt cocatalysts, CoFe2O4 at ZnIn2S4 p–n heterojunctions achieve 1576.5 µmol g−1 h−1 of H2 [286].

Noble metal mediation is also beneficial to activity. g‐C3N4/ZnO/Au attains 46.46 µmol g−1 h−1H2 (approximately 25–30 times higher than g‐C3N4), with Au acting as the mediator and increasing absorption rate through LSPR [287]. B‐doped C3N4/ZnO demonstrates Z‐schemes‐to‐type‐II switching with 2.9‐fold enhancement in H2 with Fermi level tuning [288]. Heterostructures of other types, such as α‐Bi2O3/Cd0.5Zn0.5S and Mn0.8Cd0.2S/NiCo2S4, also provide high activity through intimate interfaces, with Mn0.8Cd0.2S/NiCo2S4 operating at 21.41 µmol g−1 h−1 of H2 evolution in the absence of noble metals [288, 289]. CN/BCN heterojunctions of metal‐free 2D type yield H2 evolution rate of 3357.1 µmol g−1 h−1 with 16.3% AQE at 420 nm and multiple stable performance of 15 cycles [290]. All these developments in 2D vdW interfaces, p–n junctions, noble metal decoration, and metal‐free systems allow Z‐schemes to become scalable systems to efficiently produce H2 and convert renewable energy into useful energy.

8.2. Photocatalytic CO2 Reduction to Fuels

ZSHJs have been identified to be very useful in the separation of charge carriers and preservation of large redox potentials, which allows conversion of CO2 to fuels selectively. As an example, 2D nanosheets and 1D nanobelts form a hybrid 3D ZnIn2S4/TiO2 system that produced CH4 at a rate of 1.135 µmol g−1 h−1, 39 times higher than pure ZnIn2S4 because of direct transfer through the Z‐scheme [291]. On the same note, the Au‐mediated ZnCdS/g‐C3N4 systems produced CH3OH at 1.31 µmol g−1 h−1, and the interfacial charge transport values were 43.6 and 32.7 times higher than that of pure ZnCdS and g‐C3N4, respectively [23]. Heterostructures of Bi2WO6/ZnIn2S4 produced 19.54 µmol g−1 h−1 CH4, greater than single components because of improved CO2 adsorption and charge transfer [292]. Z‐scheme charge separation increases CO2 conversion efficiency, which is also indicated in Ag3PO4/g‐C3N4 systems, which yielded approximately 57.5 µmol g−1 h−1 at 610 times the rate of g‐C3N4 and P25 [293]. Similarly, ZnFe2O4 /AgTiO2 nanorod heterojunctions enhanced the generation of CO, CH4, and CH3OH and 1D nanorods served as the reservoirs of charge [294]. More sophisticated 2D vdW heterostructures were also promising: C2N/aza‐CMP bilayers with Cu‐dimer anchoring reduced CO2 overpotential, and g‐C3N 4/SnS2 QD junctions bound CH4 selectively [295]. Other high‐performance systems are also based on WO4, g‐C3N4 nanosheets, which gave 4.57 µmol g−1 h−1 of CH4 and 5.19 µmol g−1 h−1 of CO with stable recrystallization [296], and CuO‐modified WO3 heterojunctions (15 wt% CuO) that gave high light absorption, charge separation, and hydrocarbon yields [297]. Altogether, Z‐scheme photocatalysts, such as 3D/2D hybrids, ternary composites, vdW heterostructures, and doped systems, show better performance in CO2 reduction, enhancing activity, selectivity, and stability to convert solar energy to fuels and to clean up the environment, as shown in Table 6.

TABLE 6.

Summary of ZSHJ photocatalysts for photocatalytic CO2 reduction to fuels.

Photocatalyst system Structural/functional features Main products and performance Reference
3D ZnIn2S4/TiO2 nanobelts Direct Z‐scheme, 2D–1D hybrid with large surface area, efficient charge separation CH4: 1.135 μmol g−1 h−1 (39× higher than ZnIn2S4) [291]
Zn0.5Cd0.5S/Au@g‐C3N4 (ternary) Au as electron mediator, enhanced visible‐light absorption, and surface area CH3OH: 1.31 μmol g−1 h−1 (43.6× vs. ZCS, 32.7× vs. g‐C3N4) [23]
3D Bi2WO6/ZnIn2S4 Electrostatic self‐assembly, abundant active sites, efficient CO2 adsorption CH4: 19.54 μmol g−1 (4 h, simulated sunlight); 8.73× versus ZnIn2S4 [292]
Ag3PO4/g‐C3N4 In situ deposition, Z‐scheme charge separation CO2 conversion: 57.5 μmol h−1 g−1 (6.1× vs. g‐C3N4, 10.4× vs. P25) [293]
ZnFe2O4 microspheres/Ag–TiO2 nanorods Indirect Z‐scheme, 1D TiO2 facilitates transport, enhanced visible absorption CO, CH4, CH3OH yields higher than ZnFe2O4/TiO2 [294]
C2N/aza‐CMP VDW heterobilayers 2D/2D direct Z‐scheme, spatial carrier separation; Cu‐dimer anchoring lowers overpotential Selective CH4 formation; high solar‐to‐fuel efficiency [295]
g‐C3N4/SnS2 QDs In situ deposition; l‐cysteine enhances CO2 adsorption and IEF Enhanced CO2 reduction; HCOOH intermediate detected (FTIR) [298]
W18O49/g‐C3N4 urchin‐like Tight interfacial contact; W5+ LSPR enables NIR activity CO: 6.46, CH4: 3.97 μmol h−1 g−1 [296]
2D/2D g‐C3N4/BiVO4 nanosheets Direct Z‐scheme, ultrathin sheets with face‐to‐face contact CH4: 4.57, CO: 5.19 μmol g−1 h−1; high recyclability [299]
Cu‐doped WO x Cu doping (15 wt%) optimizes absorption and charge separation High hydrocarbon yield; stable activity over cycles [297]

8.3. Photocatalytic H2O2 Production and Pollutant Degradation

ZSHJs can be used to synthesize H2O2 and degrade pollutants well since they separate charges very well but retain redox activity. CoWO4/Bi2WO6 3D hybrids enable visible light harvesting and dual H2O2 oxidation (O2 reduction and water oxidation) as well as single and combined antibiotic degradation [300]. The Ti3C2/g‐C3N4/BiOCl Schottky GX system produced H2O2 (1275.13 µM) with increased electron transport [301]. One sample of defect‐engineered TiO2−x /g‐C3N4−x showed a H2O2 of 1131.6 µmol L−1 h−1 H2O2, some six times higher than the same pristine sample, due to the formation of active sites and light absorption by vacancies [302]. MOF‐derived ZnIn2S4/Bi2S3 generated 995 mmol of H2O2 and removed 95% of tetracycline, which was 44.5 times more than the individual compounds [303]. Dual S‐vacancy hollow Ag2CdS/ZnIn2S4−x produced 11,837 µmol g−1 h−1 H2O2 by spatial charge separation and selective two‐electron O2 reduction [304]. ZnO/g‐C3N4‐F.V. produced 5312 µmol L−1 H2O2 in 8 h, achieving 97.4% inactivation of bacteria and molds, with •OH and •O2 − radicals acting as the primary reactive species [305].

Ephedrine was degraded using AgBr/P‐g‐C3N4 in the presence of solar light, in which h+, O2 − were the active species [19]. By catalyzing the reaction of •OH, •O2 −, and h+, NiMoO4/g‐C3N4 removed ciprofloxacin and malachite green by 90.8% and 98.8%, respectively, in half a dozen cycles [19]. BiOI/Ag@AgI containing iodine vacancies enhanced the tetracycline degradation and recyclability [306]. Bi‐ZFO/BMO fully oxidized dyes and antibiotics in 50–110 min by using the assistance of Bi SPR, oxygen vacancies, and Z‐scheme transfer [307]. The use of Ag2 CrO4‐GO composites demonstrated increased degradation of the methylene blue by 3.5 times compared to Ag2CrO4 because of the enhancement of the charge separation and photocorrosion inhibition [308]. SnNb2O6/ZnO 2D/2D interfaces exhibited 15 and four times greater rate constants in the breakdown of RhB and phenol than the conductors, respectively [309].

Overall, hierarchically designed, defect‐engineered, metal/semiconductor interface‐based, and 2D/2D, Z‐scheme photocatalysts are demonstrated as highly versatile systems in visible‐light‐driven H2O2 production and environmental cleanup in general, as shown in Figure 5a–d. In Figure 5a, sequential photocatalytic production of H2O2 and degradation of pollutants by a Cu‐based ZSHJ: diagrammatic representation of the sequence of charge transfer reactions of the reaction and the formation of reactive species [310], (b, c) LDH/CTF‐1 heterojunction photocatalytic degradation of tetracycline (TC) which exhibits mechanistic evidence of Z‐scheme charge transfer, generation of reactive species, and band alignment [311], (c) ZnO, SnIn4S8, and ZnO–SnIn4S8 ZSHJs hydrothermal synthesis to maximize photocatalytic H2O2 production and pollutant degradation [312], (d) represents gradual hydrothermal production of ZW/MCS heterojunction using Na2WO4 and Zn (NO3)2 as precursors, which are preferable in the production of H2O2 through photocatalysis and degradation of pollutants [313].

FIGURE 5.

FIGURE 5

(a) Schematic illustration of the sequential photocatalytic process over the Cu‐based ZSHJ, showing H2O2 generation followed by pollutant degradation through charge transfer and the formation of reactive oxygen species [310]. (b) The photocatalytic degradation of tetracycline (TC) with LDH/CTF‐1 heterojunction showing the mechanistic evidence of Z‐scheme charge transfer mechanism, generation of reactive species, and band alignment [311]. (c) ZnO, SnIn4S8, Z + ZSHJ: Hydrothermal route to synthesize ZnO, SnIn4S8, and SnIn4S8 + ZnO, to be used in maximizing the photocatalytic generation of H2O2 and the degradation of pollutants [312]. (d) Gradual hydrothermal preparation of ZW/MCS heterojunction by use of Na2WO4, Zn(NO3)2 as well as metal precursors, which is favorable to photocatalytic conversion of H2O2 and degradation of pollutants [313].

8.4. Solar‐Driven Organic Transformations and Green Chemistry

ZSHJs allow converting solar energy and green chemistry with energy and efficiency as they improve charge separation, redox capacity, and light harvesting. 1D/2D W18‐O49/g‐C3N4 performed better in the degradation of phenol and coupling of benzylamine, and ESR confirmed the presence of reactive species and direct transfer between the two in the Z‐scheme [314]. OER activity was enhanced through powerful interfacial interaction and subsequent Z‐scheme transfer in Ag3PO4/g‐C3N4 composites [11]. A bifunctional Z‐patterned H‐TiO2@ZIS@CoTPP‐S photocatalyst produced 158.15 µmol g−1 h−1 CO, which was stimulated by the absorption of light energy, two electric fields, and the effective activation of CO2 [315]. All‐solid‐state composites of ZnIn2S4/CeO2 provided 664.1 µmol g−1 h−1 benzaldehyde as well as 1496.6 µmol g−1 h−1 of H2, selective toward alcohol oxidation [316]. Methylene blue was degraded by TiO2/Bi2WO6 photoelectrodes by a red‐shifted absorption and a productive Z‐Scheme transfer (94% in 160 min) [317]. ZnS/TiO2 nanowires with sulfur vacancies had 35.77 mmol g−1 of H2 and 89.1% benzyl alcohol oxidation to benzaldehyde [318]. CoTiO3/Cu‐BTC MOF heterojunctions eliminated Cr(VI) (98.3%) and degraded norfloxacin (97.5%), and •OH and •O2 − were the primary species [319]. Ternary LaFeO3/B‐CN/Fe2O3 degraded navy‐blue dye (98%) through synergistic Z‐scheme transfer and B‐doping (E g = 1.6 eV) [320]. N‐doped g‐C3N4/Nd‐ZnO resulted in an antimicrobial activity with over 95% MB and tetracycline removal [321].

AgI/FeVO4C3N4 with dual Z‐schemes Ag bridges allowed reduction of Cr(VI) almost to completion in 60 min by transfer via LSPR, enhancing the transfer [322]. WO3/ZnIn2S4 was found to degrade TBBPA (91.6) through •O2 − pathways, which was supported by ESR and LC–MS/MS [323]. Mesoporous (0D/1D) Fe2O3 @ AgVO3 showed 94.3% Cr(VI) photoreduction, 1.05 mV OER, and 6.2 mA cm−2 photocurrent in AM 1.5G condition [324]. Altogether, Z‐scheme photocatalysts can be applied to perform organic synthesis, degrade pollutants, and split water, and vacancy engineering, interface design, and ternary design are some of the strategies to further develop sustainable energy and environmental remediation.

9. Scalability, Integration, and Reactor Design

9.1. Immobilized Thin Films

Thin films are immobilized to address the drawbacks of powder photocatalysts (recovery, stability, recycle) and ZSHJs in addition to improving charge separation and redox capacity. A spin‐coated NiFe2O4/NiO film on stainless steel (sol–gel coating) reduced CO2 and produced H2, 95.78% Congo Red was degraded (180 min) and 381.87 µmol dm−2 of H2 was produced, and active life persisted after five cycles [325]. All‐solid‐state Z‐schemes of RhB and tetracycline degradation were made on glass with TiO2/g‐C3N4 films and were optimally active on five layers [59]. LaCoO3/La‐g‐C3N4 immobilized through polyaniline films reached 97.2% enrofloxacin degradation in 60 min, 91% COD, and 83.5% total organic carbon removal of wastewater; •O2 − and •OH were predominant species [326].

Films of g‐C3N4/FeO8/H2O2 (pulsed laser deposition with thermal synthesis) demonstrated petal‐like structures, which increased ciprofloxacin degradation rate to k = 8.28  × 10−4 min−1 (photocatalysis) and 2.6 × 10−3 min−1 (photo‐Fenton), respectively, compared to FeO8/H2O2 controls [59]. Films on Bi plates BiOBr/BiVO4 (electrochemical ion exchange) produced 95.27 mmol g−1 h−1CO, which is higher than either of the components; DFT proved the Z‐scheme transfer [327]. CdS/Cd‐BiOCl films (15%) exhibited better tetracycline elimination Z‐scheme transfer using metallic Cd as the mediator; •O2 − and •OH were the primary species [328]. ZnO/ZnCo2O4/Co3O4 films on cobalt foil combined Z‐scheme (ZnO/ZnCo2O4) and Type II (ZnCo2O4/Co3O4) heterojunctions, with 80.7% norfloxacin degradation and H2 yield of 357.12 µmol dm−2 [329]. FeSiB/TiO2 hybrid films produced by painting had 98.2/85.5%, respectively, tetracycline degradation in 4 h at pH 2/12 and could be recycled three times [330]. Hence, the idea of immobilized Z‐schemes thin films allows to generate and efficiently degrade pollutants and produce solar fuels, and the interface design, immobilization tactics, and morphology optimization determine the performance.

9.2. Photoreactor Configurations and Scale‐up Challenges

Photocatalytic conversion of CO2 and water provides a sustainable way of producing fuels but has challenges such as poor yields, low stability, and price. ZSHJs enhance charge separation, stability, and scalability of variants of photoreactor designs. A continuous‐flow reactor utilized reduced titania Cu2O, Z‐schemes, which provided CO2 to CH4 reduction (462 nmol g−1, 0.13%) in 42 h by inhibiting the Cu2O photocorrosion process [331]. A ternary CuWO4/Bi2S3/ZIF67 dual Z‐scheme degraded metronidazole and cephalexin with efficiencies of 95.6% and 90.1% in batch and flow reactors with a stability of more than six cycles; OH radicals prevailed [332]. Ag/Ag2O‐BiVO4 films improved the degradation of dye approximately 28 times (k obs > 0.45 min−1) under blue LEDs or sunlight despite the constraints of recombination [333].

g‐C3N4 catalysts were also studied in a gastight, 20 mL, stainless‐steel reactor, the isotopic controls indicated consistent reduction of CO2 with catalysts, and reactor design was noted to show reproducible catalysts [334]. V2AlC/ZnCo2O4/TiO2 monoliths were comparable to fixed‐bed, monolith, and flow reactor with selectivity control: fixed‐bed preferred CO/H2, and monolith preferred CH4/H2 with yields up to 49 313 mmol g−1 CO [335]. Pt/GaP–TiO2–SiO2:Rh (PGTSR) with a high defect density made it possible to run overall water and seawater separation, with HER/OER of 80.1/41.2 mmol−1, twin reactors with ion shuttle membranes continued to operate with H2/O2 separation [336]. CdS/g‐C3N4 nanorod‐QDs improved C‐N interactions to achieve cell concentrations of 199.79 µmol (4.3 higher than pristine g‐C3N4) and nearly 100% gram‐scale conversion in 100 h [266].

Mineralized levofloxacin scalable Np‐(3) BTO@CuO films imitated in helical plug flow reactor 120 min faster than batch systems, which was authenticated by CFD modeling and spectroscopy [337]. α‐Fe2O3/ZnO/rGO heterostructures in helical plug flow reactor are 2.3‐fold faster than batch systems, verified by CFD modeling and spectroscopy [338]. In general, both ZSHJs in built‐in reactor designs lead to better charge separation, selectivity, and stability. The geometry of the reactor, light distribution, and mass transfer are the critical parameters used to scale photocatalytic processes to an industrial scale.

9.3. Integration With Photoelectrochemical (PEC) Devices

ZSHJs with PEC systems increase charge separation and maintain good redox potentials and device stability, which consequently allows effective water splitting, pollutant degradation, and biosensing. Indicatively, as shown by a nano‐sized pn junction consisting of Cu2O‐based on ZnO nanorods and Au, an onset potential of −0.330 V and a photocurrent density of −0.206 mA cm−1 were obtained, which is a significant improvement on n‐Cu2O because of the synergistic coupling between internal electric fields and Z‐scheme charge transfer processes [339]. The IPCE of tandem PEC architectures, including flexible MoSe2/CdS/ZnO on Au paper, was 52% at 460 nm, with a photocurrent of 2.4 mA cm−2, and H2 evolution rate of 39.7 µmol cm−2 h−1, which had been reported as highly efficient in PEC water splitting [340]. Other applications of ZSHJ other than energy conversion include PEC sensing and remediation. It was discovered that ternary systems of Bi/Bi2WO6/g‐C3N4 were 3.4–10.4 times more sensitive than the corresponding individual components, allowing the detection of chlorpyrifos at 3.3 pM [341]. CdTe/Cd/ZnO‐Sb arrays, which took advantage of the synergistic piezo/p–n field effects, generated a photocurrent of −3.86 mA cm−2, an H2 generation of 58.5 mol cm−2, and 84.7% Faradaic efficiency [342]. Likewise, TiO2/Ti3C2 T x /Cu2O heterostructures allowed self‐powered PEC glucose sensing with a detection limit of 100 nM [343].

To remediate the environment, multi‐heterojunction TiO2‐BiVO4‐BP/RP films broke down 96.5% of fluxapyroxad in 120 min with 45% defluorination and maintained its stability in 10 cycles [344]. BiVO4/WSe2 (BVTS) photoanodes were also effective at catalyzing ampicillin degradation [345], and CdS/ZnS (CSZS–VZn) heterostructures were used to detect microRNA‐122 (10 aM–100 pM, 3.3 aM LOD) [346]. Application 3D ZIS/WO3 heterostructures detected PSA with a limit of detection of 5 pg/mL [347], AgI/Ag/BiOI arrays detected chloramphenicol at 0.226 nM [348], and CdS‐NPs@ZnO‐NRs core shell removed 94.07% tetracycline in 90 min with a photocurrent of 3.002 mA cm−2 and an overpotential of 171 mV [349]. In general, the incorporation of ZSHJs into PEC devices increases light‐harvesting, interfacial charge transfer, and redox functions in scalable applications in clean energy synthesis, pollutant treatment, and biosensing, as a summary of Table 7.

TABLE 7.

Summary of ZSHJ integration with PEC devices for energy and environmental applications.

Photocatalyst system Application Key features and outcomes Reference
ZnO NRs/Au/p–n Cu2O PEC water splitting Onset potential −0.330 V; photocurrent density 0.206 mA cm−2; 237% enhancement due to p–n junction and Z‐scheme separation [339]
MoSe2–CdS–ZnO on Au paper (tandem Z‐scheme) Flexible PEC photoanode for H2 generation IPCE 52% @ 460 nm; current density 2.4 mA cm−2 @ 0.3 V versus NHE; H2 yield 39.7 μmol cm−2 h−1 [340]
Bi/Bi2WO6/g‐C3N4 PEC aptasensor (chlorpyrifos) Photocurrent 0.7 μA; detection limit 3.3 pM; linear 0.01–1000 nM; recovery 98.4%–102.7% [341]
n‐CdTeCd/p‐ZnO x Sb nanorods (bi‐piezoelectric Z‐scheme) PEC water splitting Photocurrent −3.86 mA cm−2; H2 evolution 58.5 μmol cm−2 h−1; Faradaic efficiency 84.7% [342]
TiO2/Ti3C2T x /Cu2O PEC glucose biosensing Self‐powered sensor; detection limit 33.75 nM; linear 100 nM–10 μM; high selectivity [343]
TiO2–BiVO4–BP/RP multi‐heterojunction films PEC pollutant degradation 96.5% fluxapyroxad removal in 120 min; 45.41% defluorination; stable for 10 cycles [344]
BiVO4/WSe2 (BVTS) PEC degradation of pharmaceuticals Enhanced interfacial charge transfer, ROS generation, and long‐term durability [345]
CdS/ZnS with Zn vacancies (CSZS–VZn) PEC biosensor (microRNA‐122) Detection range 10 aM–100 pM; limit 3.3 aM; Exo III‐assisted amplification [346]
3D ZnIn2S4/WO3 PEC immunosensor (PSA detection) Linear range 0.01–500 ng/mL; detection limit 5 pg/mL; high sensitivity and reproducibility [347]
3D AgI/Ag/BiOI arrays PEC aptasensor (chloramphenicol) Wide linear range 2–250 nM; detection limit 0.226 nM; biocatalytic precipitation amplification [348]
CdS‐NPs@ZnO‐NRs (core–shell) PEC tetracycline degradation and water splitting 94.07% degradation (90 min); photocurrent 3.002 mA cm−2; overpotential 171 mV @ 2 mA cm−2 [349]

10. Challenges and Future Perspectives

10.1. Mechanistic Ambiguities

ZSHJs have potential applications in the fields of pollutants degradation, water purification, CO oxidation, and selective chemical transformations, but the mechanisms of charge transfer, recombination, and oxidation are not understood. The dynamics are essential to understand in order to design rational photocatalysts. Average oxidation state and carbon oxidation state increased to 1.35 and 2.94, respectively, by using AgIn5S8/ZnO heterojunction to treat pharmaceutical wastewater under the influence of internal electric fields that facilitated the spatial separation of charges and high redox capability [350]. MoS2/g‐C3N4 adhered to the direct Z‐scheme behavior through band bending, but the transfer was low due to low tunneling probability; metallic layers (Ag, Al, Au, Pt) provided fast charge channels, and Al made effective Ohmic contacts as a cost‐effective substitute [351]. In BiOI/g‐C3N4, interface non‐radiative recombination centers enhanced the reduction of Cr(VI) (79.2% within 15 min), as shown by PL, PA, WF, and ESR studies [352]. Tenfold CO oxidation was observed in FePc/Ag/TiP nanosheets compared to bulk TiP and was enhanced compared to TiO2 (P25) under Ag‐assisted Z‐scheme transfer and directional O2 activation [353]. Co3O4/NiCo2O4 hetero‐nanocages containing VO2 cavities allowed the visible‐light CO2 methanation with a 96.3% CH4 selectivity and 20.32 µmol g−1 h−1 carbon formation, with Ni atoms being able to tune Co, d‐band centers in order to influence atomic‐level charge control [354]. Heterojunctions of BiVO4 at ZnIn2S4 improved the production of hydrogen peroxide (1585.99 µmol g−1 h−1) with a 2D/3D interaction and adsorption of O2 [355]. Photo‐piezocatalysis using the N‐vacancy g‐C3N4 homojunctions was reported, with type‐II and Z‐schemes varying, enhancing RhB degradation and H2O2 generation [356].

COF‐TaTp/SnS2 S‐schemes were found to have very high internal fields (2.14–4.63 times higher than as components) with C─N─S bonds selecting bands and hybrid states to generate visible NIR–H2O2 [357]. Ferroelectric polarization and S‐scheme transfer were used in KNbO3‐CuO, where the production of CH4 was increased by 26 times with a selectivity of 97.8% [358] and g‐C3N4‐CeO2 with persulfate (PDS), which oxidized bisphenol A (94.2% selectivity) nonradically [359]. Therefore, Z‐ and S‐scheme heterojunctions enhance photocatalysis, but the specific interfacial charge dynamics, recombination, and vacancy‐mediated processes remain unclear. Mechanistic understanding is essential in developing the new generation photocatalysts to energy and environmental use.

10.2. Long‐Term Stability and Short‐Term Stability

On solar energy conversion and environmental remediation, stabilizing Z‐scheme photocatalysts is necessary. There are strategies such as heterojunction engineering, modulation of defects, core–shell designs, and plasmonic integration [360]. ZnIn2S4/TiO2−x heterojunctions used the sulfur‐Ti3+/oxygen vacancy interactions, which prolonged the light absorption and stabilized the sites. The best 30ZIS/TiO2 yielded H2 evolution more than 20‐ and fourfold better than TiO2 and ZnIn2S4, with no loss of activity, as did g‐C3N4/ZnIn2S4 with 91.3% selectivity [361]. CuMn2O4/GO heterostructures increased RhB (84.46) and MB (99.82) degradation after 10 cycles. They also had a low overpotential (267.6 mV), Tafel slope (122.4 mV/dec), charge transfer resistance (2.13 Ω), and long‐term electrochemical stability [362]. Recombination and sulfide photocorrosion were inhibited in MoS2@ In2S3/Bi2S3 core–shell heterojunctions, with H2 evolution rates of 973.42 µmol h−1 halved and tetracycline degradation of 99.6% in 90 min [363]. ZnS/Fe2O3 nanohybrids allowed 95.6% RhB degradation in 60 min and complete E. coli inactivation, which was stable up to six cycles [364]. V2O5/β‐Bi2O3 employed thermal phase transition and incorporation of vanadium to trigger interfacial fields in obtaining >98% Hg0 elimination and 95% retention over 35 h [365]. Plasmonic Bi0 with Z‐scheme junctions of H2O2 (953 µmol g−1 h−1) and NH4 + (131 µmol g−1 h−1) was produced by CeVO4/Bi/Bi2MoO6 with the use of 4–20 times as much kinetics compared to binary systems [366]. The levofloxacin degradation capacity was maintained at 99%, 95%, and 92% in a ternary Z‐scheme after three consecutive cycles [367]. TiO2/ZnTe/Au nanocorncobs were under illumination to exploit the Au plasmonics to stoichiometrically split water (3344 μmol g−1 h−1, 0.98% STH), and morphology was maintained under light [368]. Junctions, including g‐C3N4–Ag3PO4, Fe2(MoO4)3/Ag, and Ag3PO4, were photoresistant, redox potential stable, and could be used repeatedly with minimum degradation [369, 370]. Altogether, interfacial coupling, control of vacancies, plasmonic enhancement, and manipulation of heterostructure are essential to reach stability in Z‐scheme systems, active sites, recombination suppression, and preservation of structure during prolonged operation.

11. Conclusions

Heterojunction photocatalysts based on Z‐scheme have emerged as versatile platforms for coupling efficient charge separation with strong redox capability. They can pave the way for solar‐driven environmental remediation, hydrogen evolution, CO2 conversion, and value‐added chemical transformations. Photocatalytic benefits of Z‐scheme systems cannot be interpreted from either the band alignment or enhanced catalytic activity only. For a rigorous mechanistic understanding, correlation of the interfacial structure, electronic configuration, charge redistribution, carrier dynamics, and surface reaction chemistry is required. One cannot distinguish between type‐II, Z‐scheme, and S‐scheme pathways easily as similar photocatalytic responses arise from fundamentally different charge transfer processes.

According to the analysis, approaches, such as Mott–Schottky, VB–XPS, UV–vis spectroscopy, PL, photocurrent, electrochemical impedance spectroscopy, EPR, and radical trapping experiments, have provided evidence that is valuable but generally indirect. More dependable mechanistic assignments must take account of additional characterization, including work function measurements, KPFM, surface photovoltage spectroscopy, dark/light and in situ irradiated XPS, photodeposition, and ultrafast transient spectroscopy, DFT calculations where appropriate. Observations should be viewed in unison, and not any one measurement taken as proof of a Z‐ or S‐scheme mechanism. In addition, photocatalytic performance should be decoupled from intrinsic charge transfer effects since surface area, adsorption, defects, light harvesting, cocatalysts, and mass transfer processes can all independently affect apparent activity. Future studies should focus on long‐term stability, photocorrosion resistance, elemental and mediator leaching, maintenance of interfacial coupling, performance in real wastewater, and continuous‐flow conditions for practical applications. Essential aspects also include standardized activity reporting, quantitative characterization of interfacial electric fields, mineralization and toxicity assessment, immobilized catalyst architectures, scale‐up, techno‐economic evaluation, and life‐cycle assessment. The future design of Z‐scheme photocatalysts should not only rely on the experimental optimization of materials but also aim at interface engineering that is experimentally verified, quantitatively characterized, and application‐oriented. This will give a more reliable path from fundamental charge transfer concepts to sustainable solar energy and sustainable environmental technologies.

Author Contributions

Mahalakshmi and Radhakrishnan: conceptualization, methodology, data curation, writing – original draft. Manikandan Ayyar and Subasree: software, resources, visualization. Zeinebou Yahya: writing – review and editing, project administration, supervision, validation. Lalitha Gnanasekaran and Shanmugapriya: writing – review and editing, resources, methodology. Abinet Gosaye Ayanie: former analysis, validation, writing – review and editing.

Funding

The authors have nothing to report.

Conflicts of Interest

The authors declare no conflicts of interest.

Contributor Information

Radhakrishnan Kotham, Email: raddhakrishnan21@gmail.com.

Manikandan Ayyar, Email: manikandan.frsc@gmail.com.

Abinet Gosaye Ayanie, Email: abinet.gosaye@astu.edu.et.

Data Availability Statement

The data that support the findings of this study are available from the corresponding author upon reasonable request.

References

  • 1. Basivi P. K., Selvaraj Y., Perumal S., et al., “Graphitic Carbon Nitride (g–C3N4)–Based Z‐Scheme Photocatalysts: Innovations for Energy and Environmental Applications,” Materials Today Sustainability 29 (2025): 101069, 10.1016/j.mtsust.2024.101069. [DOI] [Google Scholar]
  • 2. Cheng T., Gao H., Sun X., et al., “An Excellent Z‐Scheme Ag2MoO4/Bi4Ti3O12 Heterojunction Photocatalyst: Construction Strategy and Application in Environmental Purification,” Advanced Powder Technology 32 (2021): 951–962, 10.1016/j.apt.2021.01.039. [DOI] [Google Scholar]
  • 3. Lv H., Wu H., Zheng J., et al., “Engineering of Direct Z‐Scheme ZnIn2S4/NiWO4 Heterojunction With Boosted Photocatalytic Hydrogen Production,“ Colloids and Surfaces A: Physicochemical and Engineering Aspects 666 (2023): 131384, 10.1016/j.colsurfa.2023.131384. [DOI] [Google Scholar]
  • 4. Zhao W., Feng Y., Huang H., et al., “A Novel Z‐Scheme Ag3VO4/BiVO4 Heterojunction Photocatalyst: Study on the Excellent Photocatalytic Performance and Photocatalytic Mechanism,” Applied Catalysis B: Environmental 245 (2019): 448–458, 10.1016/j.apcatb.2019.01.001. [DOI] [Google Scholar]
  • 5. Xu L., Tian B., Wang T., et al., “Direct Z‐Scheme Polymeric Heterojunction Boosts Photocatalytic Hydrogen Production via a Rebuilt Extended π‐Delocalized Network,” Energy & Environmental Science 15 (2022): 5059–5068, 10.1039/D2EE02380F. [DOI] [Google Scholar]
  • 6. Cheng H., Hou J., Takeda O., Guo X.‐M., and Zhu H., “A Unique Z‐Scheme 2D/2D Nanosheet Heterojunction Design to Harness Charge Transfer for Photocatalysis,” Journal of Materials Chemistry A 3 (2015): 11006–11013, 10.1039/C5TA01864A. [DOI] [Google Scholar]
  • 7. Gong Y., Quan X., Yu H., Chen S., and Zhao H., “Enhanced Photocatalytic Performance of a Two‐Dimensional BiOIO3/g‐C3N4 Heterostructured Composite With a Z‐Scheme Configuration,” Applied Catalysis B: Environmental 237 (2018): 947–956, 10.1016/j.apcatb.2018.06.060. [DOI] [Google Scholar]
  • 8. Wei J., Liu Z., Zhang Y., et al., “Unraveling Charge Transfer Pathways and Mechanisms in CdS@CoWO4 Z‐Scheme Heterojunction Photocatalysts for High‐Efficiency Environmental Remediation,” Separation and Purification Technology 306 (2023): 122664, 10.1016/j.seppur.2022.122664. [DOI] [Google Scholar]
  • 9. Palanivel B., Hossain M. S., Raghu M. S., et al., “Green Synthesis of Fe2O3 Deposited g‐C3N4: Addition of rGO Promoted Z‐Scheme Ternary Heterojunction for Efficient Photocatalytic Degradation and H2 Evolution Reaction,” Materials Research Bulletin 162 (2023): 112177, 10.1016/j.materresbull.2023.112177. [DOI] [Google Scholar]
  • 10. Wang H., Guan N., Feng Z., Xiang W., Zhao H., and Zhang X., “Constructing Defect Engineered 2D/2D MoO3/g‐C3N4 Z‐Scheme Heterojunction for Enhanced Photocatalytic Activity,” Journal of Alloys and Compounds 926 (2022): 166964, 10.1016/j.jallcom.2022.166964. [DOI] [Google Scholar]
  • 11. Yang X., Tian L., Zhao X., Tang H., Liu Q., and Li G., “Interfacial Optimization of g‐C3N4‐Based Z‐Scheme Heterojunction Toward Synergistic Enhancement of Solar‐Driven Photocatalytic Oxygen Evolution,” Applied Catalysis B: Environmental 244 (2019): 240–249, 10.1016/j.apcatb.2018.11.056. [DOI] [Google Scholar]
  • 12. Zhang C., Liang Q., Wang Y., et al., “Construction of Z‐Scheme Heterojunction CoS/CdS@g‐C3N4 Hollow Sphere With Spatical Charge Separation for Enhanced Photocatalytic Hydrogen Production,” Applied Surface Science 626 (2023): 157214, 10.1016/j.apsusc.2023.157214. [DOI] [Google Scholar]
  • 13. Zhang Y., Wu Y., Wan L., et al., “Double Z‐Scheme g‐C3N4/BiOI/CdS Heterojunction With I3−/I− Pairs for Enhanced Visible Light Photocatalytic Performance,” Green Energy & Environment 7 (2022): 1377–1389, 10.1016/j.gee.2021.08.004. [DOI] [Google Scholar]
  • 14. Fu Y., Ren Z., Wu J., et al., “Direct Z‐Scheme Heterojunction of ZnO/MoS2 Nanoarrays Realized by Flowing‐Induced Piezoelectric Field for Enhanced Sunlight Photocatalytic Performances,” Applied Catalysis B: Environmental 285 (2021): 119785, 10.1016/j.apcatb.2020.119785. [DOI] [Google Scholar]
  • 15. Li Q., Xia Y., Yang C., Lv K., Lei M., and Li M., “Building a Direct Z‐Scheme Heterojunction Photocatalyst by ZnIn2S4 Nanosheets and TiO2 Hollowspheres for Highly‐Efficient Artificial Photosynthesis,” Chemical Engineering Journal 349 (2018): 287–296, 10.1016/j.cej.2018.05.094. [DOI] [Google Scholar]
  • 16. Xiong R., Tang C., Liu S., Xiao Y., Cheng B., and Lei S., “Unique Multi‐Hierarchical Z‐Scheme Heterojunction of Branching SnIn4S8 Nanosheets on ZnIn2S4 Nanopetals for Boosted Photocatalytic Performance,” Separation and Purification Technology 295 (2022): 121267, 10.1016/j.seppur.2022.121267. [DOI] [Google Scholar]
  • 17. Zhang J., Guo Y., Xiong Y., Zhou D., and Dong S., “An Environmentally Friendly Z‐Scheme WO3/CDots/CdS Heterostructure With Remarkable Photocatalytic Activity and Anti‐Photocorrosion Performance,” Journal of Catalysis 356 (2017): 1–13, 10.1016/j.jcat.2017.09.021. [DOI] [Google Scholar]
  • 18. Humayun M., Bahadur A., Khan A., and Bououdina M., “Exceptional Photocatalytic Performance of the LaFeO3/g‐C3N4 Z‐Scheme Heterojunction for Water Splitting and Organic Dyes Degradation,” Catalysts 13 (2023): 907, 10.3390/catal13050907. [DOI] [Google Scholar]
  • 19. Chen M., Guo C., Hou S., et al., “A Novel Z‐Scheme AgBr/P‐g‐C3N4 Heterojunction Photocatalyst: Excellent Photocatalytic Performance and Photocatalytic Mechanism for Ephedrine Degradation,” Applied Catalysis B: Environmental 266 (2020): 118614, 10.1016/j.apcatb.2020.118614. [DOI] [Google Scholar]
  • 20. Shi J., Li S., Wang F., et al., “In Situ Topotactic Formation of 2D/2D Direct Z‐Scheme Cu2 S/Zn0.67 Cd0.33 S In‐Plane Intergrowth Nanosheet Heterojunctions for Enhanced Photocatalytic Hydrogen Production,” Dalton Transactions 48 (2019): 3327–3337, 10.1039/C8DT04154G. [DOI] [PubMed] [Google Scholar]
  • 21. Majhi D., Das K., Mishra A., Dhiman R., and Mishra B. G., “One Pot Synthesis of CdS/BiOBr/Bi2O2CO3:A Novel Ternary Double Z‐Scheme Heterostructure Photocatalyst for Efficient Degradation of Atrazine,” Applied Catalysis B: Environmental 260 (2020): 118222, 10.1016/j.apcatb.2019.118222. [DOI] [Google Scholar]
  • 22. Liu W., Shen J., Yang X., Liu Q., and Tang H., “Dual Z‐Scheme g‐C3N4/Ag3PO4/Ag2MoO4 Ternary Composite Photocatalyst for Solar Oxygen Evolution From Water Splitting,” Applied Surface Science 456 (2018): 369–378, 10.1016/j.apsusc.2018.06.156. [DOI] [Google Scholar]
  • 23. Madhusudan P., Shi R., Xiang S., et al., “Construction of Highly Efficient Z‐Scheme ZnxCd1‐xS/Au@g‐C3N4 Ternary Heterojunction Composite for Visible‐Light‐Driven Photocatalytic Reduction of CO2 to Solar Fuel,” Applied Catalysis B: Environmental 282 (2021): 119600, 10.1016/j.apcatb.2020.119600. [DOI] [Google Scholar]
  • 24. Liang X., Zhao J., Wang T., Zhang Z., Qu M., and Wang C., “Constructing a Z‐Scheme Heterojunction Photocatalyst of GaPO4/α‐MoC/Ga2O3 Without Mingling Type‐II Heterojunction for CO2 Reduction to CO,” ACS Applied Materials & Interfaces 13 (2021): 33034–33044, 10.1021/acsami.1c07757. [DOI] [PubMed] [Google Scholar]
  • 25. Ding C.‐C., Sun Y.‐J., Liu T., Li H.‐D., and Fan Q.‐C., “h2D‐C2 N/C3B Two‐Dimensional Heterostructures: A Direct Z‐Scheme Photocatalyst for Overall Water Splitting,” The Journal of Physical Chemistry C 128 (2024): 3377–3383, 10.1021/acs.jpcc.3c07825. [DOI] [Google Scholar]
  • 26. Wang S., Ma Y., Feng X., Yang Y., Xie L., and Feng S., “Study of Direct Z‐Scheme Water Splitting Photocatalytic Janus‐WSSe/HfZrCO2 vdW Heterostructures: First Principles Calculations,” Computational and Theoretical Chemistry 1248 (2025): 115243, 10.1016/j.comptc.2025.115243. [DOI] [Google Scholar]
  • 27. Pan C., Ou M., Cheng Q., et al., “Z‐Scheme Heterojunction Functionalized Pyrite Nanosheets for Modulating Tumor Microenvironment and Strengthening Photo/Chemodynamic Therapeutic Effects,” Advanced Functional Materials 30 (2020): 1906466, 10.1002/adfm.201906466. [DOI] [Google Scholar]
  • 28. He G., Xiao Y., and Du H., “An Overview and Recent Progress in Photocatalytic Cr(VI) Reduction and Hydrogen Evolution,” International Journal of Hydrogen Energy 53 (2024): 633–646, 10.1016/j.ijhydene.2023.12.125. [DOI] [Google Scholar]
  • 29. Yang F., Boulet P., and Record M.‐C., “Electronic Structure and Photocatalytic Performance of Janus MoSSe/Ga2SSe Van der Waals Heterostructures,” International Journal of Hydrogen Energy 73 (2024): 536–546, 10.1016/j.ijhydene.2024.06.042. [DOI] [Google Scholar]
  • 30. Ji X., Kang Y., Fan T., et al., “An Antimonene/Cp*Rh(phen)Cl/Black Phosphorus Hybrid Nanosheet‐Based Z‐Scheme Artificial Photosynthesis for Enhanced Photo/Bio‐Catalytic CO2 Reduction,” Journal of Materials Chemistry A 8 (2020): 323–333, 10.1039/C9TA11167K. [DOI] [Google Scholar]
  • 31. Tian F., Wu X., Liu S., et al., “Boosting Photocatalytic H2 Evolution Through Interfacial Manipulation on a Lotus Seedpod Shaped Cu2O/g‐C3N4 p‐n Heterojunction,” Sustainable Energy & Fuels 7 (2023): 786–796, 10.1039/D2SE01634F. [DOI] [Google Scholar]
  • 32. N D. V., Sen S., and Chattopadhyaya M., “A Study of Strain and Electric Field Induced Photocatalytic Crossover in g‐C3N4/CoN4 Nanocomposite Through DFT : Upgradation From Type‐I to Type‐II Photocatalyst for Water Splitting Reaction,” ChemRxiv 91 (2024), 1136–1148,  10.26434/chemrxiv-2024-c3tpf. [DOI] [Google Scholar]
  • 33. Wang Y., Fiaz M., Kim J., Carl N., and Kim Y. K., “Kinetic Evidence for Type‐II Heterojunction and Z ‐Scheme Interactions in g‐C3N4/TiO2 Nanotube‐Based Photocatalysts in Photocatalytic Hydrogen Evolution,” ACS Applied Energy Materials 6 (2023): 5197–5206, 10.1021/acsaem.3c00130. [DOI] [Google Scholar]
  • 34. Zha R., He L., Shi T., and Zhang M., “Design Principles and Interface Engineering of the Organic‐Inorganic Hybrid S‐Scheme Heterojunctions for Advancing Photocatalysis,” Advanced Composites and Hybrid Materials 9 (2026): 214, 10.1007/s42114-026-01630-z. [DOI] [Google Scholar]
  • 35. Lee J., Kim Y., Kwak B. S., et al., “Atomic‐Scale Structurally Locked 1T/2H ‐ MoS2/ZnS Z‐Scheme Heterojunctions for Prolonged Charge Kinetics and Dual‐Functional Photocatalysis,” Energy & Environmental Materials (2026): e70493, 10.1002/eem2.70493. [DOI] [Google Scholar]
  • 36. Lv N., Lin S., Liu S., and Qi K., “Fabricating S‐Scheme Heterojunction via D‐a Type COF and ZnIn2S4 Quantum Dots: An Efficient Strategy for Photocatalytic Generation of Hydrogen Peroxide,” Advanced Sustainable Systems 10 (2026): e01582, 10.1002/adsu.202501582. [DOI] [Google Scholar]
  • 37. Khan A. A. P., Sonu, Sudhaik A., Raizada P., Danish M., Khan A., Kamal T., Rahman M. M., Asiri A. M., and Singh P., “Fabrication of Direct Z‐Scheme Heterojunction of S Doped g‐C3N4/Ag/AgI for Efficient Dye Degradation,” Materials Letters 357 (2024): 135666, 10.1016/j.matlet.2023.135666. [DOI] [Google Scholar]
  • 38. Cheng C., He B., Fan J., Cheng B., Cao S., and Yu J., “An Inorganic/Organic S‐Scheme Heterojunction H2 ‐Production Photocatalyst and Its Charge Transfer Mechanism,” Advanced Materials 33 (2021): 2100317, 10.1002/adma.202100317. [DOI] [PubMed] [Google Scholar]
  • 39. Yang Y., Li Y., Tao S., et al., “Interfacial Charge Transfer in 2D/2D S‐Scheme Bi2MoO6/MoS2 Heterojunction for Enhanced Photocatalytic Antibiotic Degradation,” Chemical Engineering Journal 522 (2025): 167608, 10.1016/j.cej.2025.167608. [DOI] [Google Scholar]
  • 40. Malhotra M., Soni V., Kumar R., et al., “Designing a Bimetallic Fe, Co‐MOF Supported Sn‐Doped BiFeO3/CdS Dual Z‐Scheme Heterojunction for Boosted Visible Light Gatifloxacin Degradation: Coupling Experimental Performance With DFT Insights,” Journal of Environmental Chemical Engineering 14 (2026): 124644, 10.1016/j.jece.2026.124644. [DOI] [Google Scholar]
  • 41. Meng Z., Zhang J., Long H., et al., “Kelvin Probe Force Microscopy Reveals Spatially Resolved Charge‐Transfer Mechanism in CdS/BiOBr S‐Scheme Heterojunction Photocatalyst,” Angewandte Chemie 137 (2025): e202505456, 10.1002/ange.202505456. [DOI] [PubMed] [Google Scholar]
  • 42. Fan J., Song C., Zhang Y., Wang H., and Zou J., “Engineering MXenes Charge Bridge Enables Fast Carrier Transport in S‐Scheme Heterojunctions for Enhanced Photocatalytic H2 Production,” Applied Catalysis B: Environment and Energy 385 (2026): 126268, 10.1016/j.apcatb.2025.126268. [DOI] [Google Scholar]
  • 43. Xu W., Yu Z., Yang H., et al., “Engineering Charge Transfer of MXene‐Hybridized Photocatalysts: An In Situ Kelvin Probe Atomic Force Microscopy Study,” Small 22 (2026): e13542, 10.1002/smll.202513542. [DOI] [PubMed] [Google Scholar]
  • 44. Biswal L., Acharya L., Mishra B. P., Das S., Swain G., and Parida K., “Interfacial Solid‐State Mediator‐Based Z‐Scheme Heterojunction TiO2@Ti3 C2/MgIn2S4 Microflower for Efficient Photocatalytic Pharmaceutical Micropollutant Degradation and Hydrogen Generation: Stability, Kinetics, and Mechanistic Insights,” ACS Applied Energy Materials 6 (2023): 2081–2096, 10.1021/acsaem.2c04144. [DOI] [Google Scholar]
  • 45. Sarkar A., Mandal M. K., Das S., et al., “Facile In‐Situ Synthesis of Solid Mediator Based CdS‐rGO‐WO3 Z‐Scheme Photocatalytic System for Efficient Photocatalytic Hydrogen Generation,” Optical Materials 147 (2024): 114670, 10.1016/j.optmat.2023.114670. [DOI] [Google Scholar]
  • 46. Biswal L., Tripathy S. P., Dash S., Das S., Subudhi S., and Parida K., “Aggrandized Photocatalytic H2O2 and H2 Production by a TiO2/Ti3C2 –TiC/Mixed Metal Ce–Zr MOF Composite: An Interfacial Engineered Solid‐State‐Mediator‐Based Z‐Scheme Heterostructure,” Materials Advances 5 (2024): 4452–4466, 10.1039/D3MA01176C. [DOI] [Google Scholar]
  • 47. Yang Z., Ma F., Zhang Y., et al., “In Situ Growth of Bi0 and BiOBr on Bi‐MOF Nanoribbons via Chemically Bond for Boosting the Photocatalytic Chlortetracycline Removal by MOF Framework, Oxygen Vacancies, and Mediator‐Based Z‐Scheme Heterojunction,” Journal of Nanoparticle Research 27 (2025): 102, 10.1007/s11051-025-06298-y. [DOI] [Google Scholar]
  • 48. Nayak S. and Parida K. M., “Deciphering Z‐Scheme Charge Transfer Dynamics in Heterostructure NiFe‐LDH/N‐rGO/g‐C3N4 Nanocomposite for Photocatalytic Pollutant Removal and Water Splitting Reactions,” Scientific Reports 9 (2019): 2458, 10.1038/s41598-019-39009-4. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 49. Das S., Acharya L., Biswal L., Mishra B. P., and Parida K., “Photocatalytic Activity Towards Antibiotic Degradation and H2 Evolution by Development of a Z‐Scheme Heterojunction Constructed From 1T/2H‐MoS2 Nanoflowers Embellished on BCN Nanosheets,” Catalysis Science & Technology 13 (2023): 2827–2840, 10.1039/D3CY00266G. [DOI] [Google Scholar]
  • 50. Li B., Wang W., Zhao J., et al., “All‐Solid‐State Direct Z‐Scheme NiTiO3/Cd0.5 Zn0.5 S Heterostructures for Photocatalytic Hydrogen Evolution With Visible Light,” Journal of Materials Chemistry A 9 (2021): 10270–10276, 10.1039/D1TA01220G. [DOI] [Google Scholar]
  • 51. Gong Y., Wu Y., Xu Y., et al., “All‐Solid‐State Z‐Scheme CdTe/TiO2 Heterostructure Photocatalysts With Enhanced Visible‐Light Photocatalytic Degradation of Antibiotic Waste Water,” Chemical Engineering Journal 350 (2018): 257–267, 10.1016/j.cej.2018.05.186. [DOI] [Google Scholar]
  • 52. Zhou X., Xian Y., Li Z., et al., “All‐Solid‐State Red Phosphorus/RGO/WO3 Z‐Scheme Heterostructure for Photocatalytic Overall Water Splitting,“ Separation and Purification Technology 357 (2025): 130117, 10.1016/j.seppur.2024.130117. [DOI] [Google Scholar]
  • 53. Lin J., Zhu P., Liu M., Duan M., Lu H., and Huang Z., “Unraveling Charge Transfer Pathways and Mechanisms in Visible‐Light‐Responsive Bi4O5I2/GO/Bi2Sn2O7 All‐Solid‐State Z‐Scheme Heterojunction Photocatalysts for High‐Efficiency Antibiotic Degradation,” Journal of Alloys and Compounds 960 (2023): 170761, 10.1016/j.jallcom.2023.170761. [DOI] [Google Scholar]
  • 54. Chen W., He Z.‐C., Huang G.‐B., Wu C.‐L., Chen W.‐F., and Liu X.‐H., “Direct Z‐Scheme 2D/2D MnIn2S4/g‐C3N4 Architectures With Highly Efficient Photocatalytic Activities Towards Treatment of Pharmaceutical Wastewater and Hydrogen Evolution,” Chemical Engineering Journal 359 (2019): 244–253, 10.1016/j.cej.2018.11.141. [DOI] [Google Scholar]
  • 55. Yu W., Chen J., Shang T., Chen L., Gu L., and Peng T., “Direct Z‐Scheme g‐C3N4/WO3 Photocatalyst With Atomically Defined Junction for H2 Production,” Applied Catalysis B: Environmental 219 (2017): 693–704, 10.1016/j.apcatb.2017.08.018. [DOI] [Google Scholar]
  • 56. Zhang E., Zhu Q., Huang J., et al., “Visually Resolving the Direct Z‐Scheme Heterojunction in CdS@ZnIn2S4 Hollow Cubes for Photocatalytic Evolution of H2 and H2O2 From Pure Water,” Applied Catalysis B: Environmental 293 (2021): 120213, 10.1016/j.apcatb.2021.120213. [DOI] [Google Scholar]
  • 57. Jing H., Ou R., Yu H., et al., “Engineering of g‐C3N4 Nanoparticles/WO3 Hollow Microspheres Photocatalyst With Z‐Scheme Heterostructure for Boosting Tetracycline Hydrochloride Degradation,“ Separation and Purification Technology 255 (2021): 117646, 10.1016/j.seppur.2020.117646. [DOI] [Google Scholar]
  • 58. Song L., Jin X., Zada A., et al., “Modifying MOF‐Derived Hollow BiVO4 Architecture With Copper Tetraphenylphorphyrin as High‐Efficiency Wide‐Visible‐Light Z‐Scheme Heterojunction Photocatalyst for 2‐Chlorophenol Degradation,” Journal of Environmental Chemical Engineering 11 (2023): 110069, 10.1016/j.jece.2023.110069. [DOI] [Google Scholar]
  • 59. Zhao W., Yang X., Liu C., et al., “Facile Construction of All‐Solid‐State Z‐Scheme g‐C3N4/TiO2 Thin Film for the Efficient Visible‐Light Degradation of Organic Pollutant,” Nanomaterials 10 (2020): 600, 10.3390/nano10040600. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 60. Ali H., Guler A., Masar M., et al., “Solid‐State Synthesis of Direct Z‐Scheme Cu2O/WO3 Nanocomposites With Enhanced Visible‐Light Photocatalytic Performance,” Catalysts 11 (2021): 293, 10.3390/catal11020293. [DOI] [Google Scholar]
  • 61. Lv C., Qin S., Lei Y., Li X., Huang J., and Liu J., “Direct Z‐Scheme Heterojunction Catalysts Constructed by Graphitic‐C3N4 and Photosensitive Metal‐Organic Cages for Efficient Photocatalytic Hydrogen Evolution,” Nanomaterials 12 (2022): 890, 10.3390/nano12050890. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 62. Zhang H., Zhu Z., Huang Y., Yu J., and Li M., “Construction of Z‐Scheme Heterojunction BiOCl/Bi2WO6 for Visible‐Light Photocatalytic Degradation of Tetracycline Hydrochloride,” Separations 12 (2025): 111, 10.3390/separations12050111. [DOI] [Google Scholar]
  • 63. Feng Q., Hu D., Li B., et al., “Direct Z‐Scheme ZnS/HfS2 Heterojunction for Photocatalytic Overall Water Splitting With High Carrier Mobility,” International Journal of Hydrogen Energy 83 (2024): 378–386, 10.1016/j.ijhydene.2024.07.427. [DOI] [Google Scholar]
  • 64. Liu H., Xie L., Suo R., et al., “Efficient Z Scheme‐Type II Charge Transfer on the Interfaces of PAN/ZnO/CdIn2S4 for the Enhanced Photocatalytic Hydrogen Generation,” International Journal of Hydrogen Energy 63 (2024): 36–47, 10.1016/j.ijhydene.2024.03.136. [DOI] [Google Scholar]
  • 65. Chawla A., Sonu S., Raizada P., et al., “Defect‐Engineered BiO1 ‐xBr/BiOI1 ‐x‐CdS Dual S‐Scheme Heterojunction for Enhanced Photocatalytic Cefixime Degradation,” Journal of the Taiwan Institute of Chemical Engineers 183 (2026): 106635, 10.1016/j.jtice.2026.106635. [DOI] [Google Scholar]
  • 66. Wang K., Yang Y., Farhan S., Wu Y., and Lin W.‐F., “S‐Scheme p‐n Junction Na0.6CoO2/g‐C3N4 Heterostructure as an Efficient Photocatalyst for Green Hydrogen Production: Fabrication, Characterization and Mechanisms,” Chemical Engineering Journal 490 (2024): 151408, 10.1016/j.cej.2024.151408. [DOI] [Google Scholar]
  • 67. Sun J., Liu H., Wang S., Zhang Y., Bie C., and Zhang L., “In Situ Irradiated XPS Investigation on S‐Scheme ZnIn2S4@COF‐5 Photocatalyst for Enhanced Photocatalytic Degradation of RhB,” Journal of Materiomics 11 (2025): 100975, 10.1016/j.jmat.2024.100975. [DOI] [Google Scholar]
  • 68. Fu W., Wang S., Zhang Y., Cheng B., and Wu Y., “2D/2D F‐Doped TiO2/CdS S‐Scheme Heterojunction Photocatalyst for Enhanced Photocatalytic H2 Generation,” Journal of Materials Science & Technology 232 (2025): 181–190, 10.1016/j.jmst.2024.12.081. [DOI] [Google Scholar]
  • 69. Wan A., Ren Z., He Y., et al., “A Promising Type‐II/Z‐Scheme Ternary MoS2/Bi2S3/Bi2WO6 Heterostructure Photoanode for Photocatalytic Fuel Cell Effective Hydrogen Production and Electricity Generation in Organic Wastewater,” Applied Surface Science 690 (2025): 162607, 10.1016/j.apsusc.2025.162607. [DOI] [Google Scholar]
  • 70. Qiao X.‐Q., Guo H., Du P., et al., “Dual‐Vacancy Enhanced Built‐in Electric Field Boosting Plasmonic S‐Scheme Photocatalysis for Superior Hydrogen Evolution,” Journal of Energy Chemistry 113 (2026): 1–11, 10.1016/j.jechem.2025.09.023. [DOI] [Google Scholar]
  • 71. Zhu P., Wu X., Xiao X., Duan M., Luo D., and Lin J., “Construction of Bi12O17Cl2/ZnO‐CN Z‐Scheme Photocatalyst With ZIF‐8 as Precursor to Remove Antibiotics and Cr(VI) Under Visible Light: Optimization, Mechanism and Degradation Path,” Journal of Alloys and Compounds 966 (2023): 171513, 10.1016/j.jallcom.2023.171513. [DOI] [Google Scholar]
  • 72. Yuan Z., Li J., Feng X., et al., “Enhanced Organic Dye Removal via Built‐in Electric Field Driven S‐Scheme TiO2/ZnIn2S4 Heterojunction Photocatalyst: Mechanism and Degradation Pathway,” Materials Today Chemistry 49 (2025): 103081, 10.1016/j.mtchem.2025.103081. [DOI] [Google Scholar]
  • 73. Liu L., Liu J., Yang W., Wan J., Fu F., and Wang D., “Constructing a Z‐Scheme ZnIn2S4‐S/CNTs/RP Nanocomposite With Modulated Energy Band Alignment for Enhanced Photocatalytic Hydrogen Evolution,” Journal of Colloid and Interface Science 608 (2022): 482–492, 10.1016/j.jcis.2021.09.145. [DOI] [PubMed] [Google Scholar]
  • 74. Xia B., Deng F., Zhang S., Hua L., Luo X., and Ao M., “Design and Synthesis of Robust Z‐Scheme ZnS‐SnS2 n‐n Heterojunctions for Highly Efficient Degradation of Pharmaceutical Pollutants: Performance, Valence/Conduction Band Offset Photocatalytic Mechanisms and Toxicity Evaluation,” Journal of Hazardous Materials 392 (2020): 122345, 10.1016/j.jhazmat.2020.122345. [DOI] [PubMed] [Google Scholar]
  • 75. Cai X., Su M., Zeng Z., et al., “Boosting the Photocatalytic H2 Evolution Activity of a CdS/N‐Doped ZnIn2 S4 Direct Z‐Scheme Heterostructure Using a Band Alignment Regulation Strategy,” Sustainable Energy & Fuels 5 (2021): 6441–6448, 10.1039/D1SE01266E. [DOI] [Google Scholar]
  • 76. Rahimi K. and Moshfegh A. Z., “Band Alignment Tuning of Heptazine‐g‐C3N4/g‐ZnO vdW Heterostructure as a Promising Water‐Splitting Photocatalyst,” Physical Chemistry Chemical Physics 23 (2021): 20675–20685, 10.1039/D1CP02911H. [DOI] [PubMed] [Google Scholar]
  • 77. Ye F., Su Y., Quan X., Chen S., Yu H., and Li H., “Constructing Desired Interfacial Energy Band Alignment of Z‐Scheme TiO2‐Pd‐Cu2O Hybrid by Controlling the Contact Facet for Improved Photocatalytic Performance,” Applied Catalysis B: Environmental 244 (2019): 347–355, 10.1016/j.apcatb.2018.10.066. [DOI] [Google Scholar]
  • 78. Liu C., Mao S., Shi M., et al., “Enhanced Photocatalytic Degradation Performance of BiVO4/BiOBr Through Combining Fermi Level Alteration and Oxygen Defect Engineering,” Chemical Engineering Journal 449 (2022): 137757, 10.1016/j.cej.2022.137757. [DOI] [Google Scholar]
  • 79. Jiang J., Song Y., Wang X., et al., “Enhancing Aqueous Pollutant Photodegradation via a Fermi Level Matched Z‐Scheme BiOI/Pt/g‐C3 N4 Photocatalyst: Unobstructed Photogenerated Charge Behavior and Degradation Pathway Exploration,” Catalysis Science & Technology 10 (2020): 3324–3333, 10.1039/D0CY00429D. [DOI] [Google Scholar]
  • 80. Li H., Yu H., Quan X., Chen S., and Zhang Y., “Uncovering the Key Role of the Fermi Level of the Electron Mediator in a Z‐Scheme Photocatalyst by Detecting the Charge Transfer Process of WO3‐Metal‐gC3N4 (Metal = Cu, Ag, Au,” ACS Applied Materials & Interfaces 8 (2016): 2111–2119, 10.1021/acsami.5b10613. [DOI] [PubMed] [Google Scholar]
  • 81. Tan M., Ma Y., Yu C., et al., “Boosting Photocatalytic Hydrogen Production via Interfacial Engineering on 2D Ultrathin Z‐Scheme ZnIn2 S4/g‐C3N4 Heterojunction,” Advanced Functional Materials 32 (2022): 2111740, 10.1002/adfm.202111740. [DOI] [Google Scholar]
  • 82. Cheng P., Wei X., Dai Z., et al., “Theoretical Design of a Z‐Scheme Photocatalyst for Water Splitting With Excellent Catalytic Performance: ZnTe/ZrS2 Heterojunction,” Journal of Materials Chemistry C 13 (2025): 18381–18393, 10.1039/D5TC01424G. [DOI] [Google Scholar]
  • 83. Xie L., Wu P., Lei Q., et al., “Constructing Z‐Scheme 0D/2D TiO2 Nanoparticles/Bi2O3 Nanosheet Heterojunctions With Enhanced Visible Light Induced Photocatalytic Antibiotics Degradation and Hydrogen Evolution,” Catalysts 13 (2023): 583, 10.3390/catal13030583. [DOI] [Google Scholar]
  • 84. Zhang D., Zhang L., An C., and Wang M., “Constructing Z‐Scheme 3D WO3@Co2SnO4 Heterojunction as Dual‐Photocathode for Production of H2O2 and in‐Situ Degradation of Organic Pollutants,” Water 16 (2024): 406, 10.3390/w16030406. [DOI] [Google Scholar]
  • 85. Din S. T. U., Lee H., and Yang W., “Z‐Scheme Heterojunction of 3‐Dimensional Hierarchical Bi3O4Cl/Bi5O7I for a Significant Enhancement in the Photocatalytic Degradation of Organic Pollutants (RhB and BPA),” Nanomaterials 12 (2022): 767, 10.3390/nano12050767. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 86. Deng Q., Gao L., Gao W., Hao J., Zeng C., and Wang H., “Direct Z‐Scheme M2X/BiOY (M, I) Heterojunctions for Solar‐Driven Photocatalytic Water Splitting Applications: A First‐Principles Investigation,” Nanomaterials 15 (2025): 844, 10.3390/nano15110844. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 87. Liu Y., Jian L., Zhang X., et al., “Interfacial Regulation of Bi2MoO6@B‐TiO2 Three‐Dimensional Extended Heterojunction Photoelectrode and Its Photoelectrocatalytic Water Purification Performance,” Journal of Molecular Structure 1381 (2027): 147650, 10.1016/j.molstruc.2026.147650. [DOI] [Google Scholar]
  • 88. Chen R., Zhu J., An H., Fan F., and Li C., “Unravelling Charge Separation via Surface Built‐in Electric Fields Within Single Particulate Photocatalysts,” Faraday Discussions 198 (2017): 473–479, 10.1039/C6FD00214E. [DOI] [PubMed] [Google Scholar]
  • 89. Zhong F., Sheng J., Du C., et al., “Co‐Atomic Interface Minimizing Charge Transfer Barrier in Polytypic Perovskites for CO2 Photoreduction,” Advanced Science 12 (2025): 2410437, 10.1002/advs.202410437. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 90. Luo Z., Ye X., Zhang S., et al., “Unveiling the Charge Transfer Dynamics Steered by Built‐in Electric Fields in BiOBr Photocatalysts,” Nature Communications 13 (2022): 2230, 10.1038/s41467-022-29825-0. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 91. Liu Y., Ye S., Xie H., et al., “Internal‐Field‐Enhanced Charge Separation in a Single‐Domain Ferroelectric PbTiO3 Photocatalyst,” Advanced Materials 32 (2020): 1906513, 10.1002/adma.201906513. [DOI] [PubMed] [Google Scholar]
  • 92. Huang X., Wang K., Wang Y., et al., “Enhanced Charge Carrier Separation to Improve Hydrogen Production Efficiency by Ferroelectric Spontaneous Polarization Electric Field,” Applied Catalysis B: Environmental 227 (2018): 322–329, 10.1016/j.apcatb.2018.01.036. [DOI] [Google Scholar]
  • 93. You D., Liu L., Yang Z., et al., “Polarization‐Induced Internal Electric Field to Manipulate Piezo‐Photocatalytic and Ferro‐Photoelectrochemical Performance in Bismuth Ferrite Nanofibers,” Nano Energy 93 (2022): 106852, 10.1016/j.nanoen.2021.106852. [DOI] [Google Scholar]
  • 94. Zhang J., Zhang Y., Li L., et al., “Synergizing the Internal Electric Field and Ferroelectric Polarization of the BiFeO3 /ZnIn2S4 Z‐Scheme Heterojunction for Photocatalytic Overall Water Splitting,” Journal of Materials Chemistry A 11 (2022): 434–446, 10.1039/D2TA07976C. [DOI] [Google Scholar]
  • 95. Feng Y., Niu Z., Zhen Y., and Ren J., “Interfacial Built‐in Electric Field‐Mediated Anomalous Carrier Migration in a Cu‐Ni3S4/Mn0.5Cd0.5S Schottky Heterojunction for Efficient Photocatalytic Hydrogen Evolution,” Journal of Materials Science & Technology 283 (2027): 292–302, 10.1016/j.jmst.2026.07.044. [DOI] [Google Scholar]
  • 96. Liu J., Cheng B., and Yu J., “A New Understanding of the Photocatalytic Mechanism of the Direct Z‐Scheme g‐C3 N4/TiO2 Heterostructure,” Physical Chemistry Chemical Physics 18 (2016): 31175–31183, 10.1039/C6CP06147H. [DOI] [PubMed] [Google Scholar]
  • 97. Srivastava A. P. and Pandey B. K., “Electronic Structure and Band‐Edge Engineering of Sc‐Doped g‐C3N4: A First‐Principles Study,” Discover Chemistry 3 (2026): 234, 10.1007/s44371-026-00701-w. [DOI] [Google Scholar]
  • 98. Liu Z., Liu Y., Sun X., Ji H., Liu W., and Cai Z., “Construction of Z‐Scheme Ag/AgVO3/Carbon‐Rich g‐C3N4 Heterojunction for Enhanced Photocatalytic Degradation of Sulfamethiadiazole: DFT Calculation and Mechanism Study,” Chemical Engineering Journal 433 (2022): 133604, 10.1016/j.cej.2021.133604. [DOI] [Google Scholar]
  • 99. Wang L., Fu X., Zhu C., et al., “Activated Charge Transfer by Interfacial S−O “Bridge” at MnIn2S4/WO3 for Eliminating Kanamycin: Z‐Scheme Mechanism, Pathways and Toxicity Assessment,” Separation and Purification Technology 355 (2025): 129712, 10.1016/j.seppur.2024.129712. [DOI] [Google Scholar]
  • 100. Zhu K., Yang J., Wang Y., et al., “Interfacial Electric‐Field‐Driven Z‐Scheme Kinetics and Thickness‐Modulated Hydrogen Adsorption in 2D ScP/GeS Heterostructures,” Surfaces and Interfaces 95 (2026): 109863, 10.1016/j.surfin.2026.109863. [DOI] [Google Scholar]
  • 101. Duan H., Wang J., and Li Q., “Direct Z‐Scheme BCN/in2 OS Heterostructure: A 2D Van der Waals Photocatalyst for Overall Water Splitting With Accelerated Interfacial Carrier Recombination,” The Journal of Physical Chemistry C 130 (2026): 6901–6908, 10.1021/acs.jpcc.6c01615. [DOI] [Google Scholar]
  • 102. Li J., Liang Y., Li X., Wei G., Zhang Z., and Chen Q., “Direct Z‐Scheme SnS2/WTe2 Heterojunction for Enhanced Visible‐Light‐Driven Water Splitting Performance Based on DFT,” Molecular Catalysis 579 (2025): 115048, 10.1016/j.mcat.2025.115048. [DOI] [Google Scholar]
  • 103. Li C., Liang H., Xu Z., et al., “Construction of Z‐Scheme InN/BTe Heterostructure for Enhanced Photocatalytic Hydrogen Evolution: DFT Calculation and Mechanism Study,” International Journal of Hydrogen Energy 68 (2024): 289–296, 10.1016/j.ijhydene.2024.04.228. [DOI] [Google Scholar]
  • 104. Han S., Zhu D., Li Z., Gao S., Zhao Y., and Cai X., “Rational Engineering of Built‐in Electric Fields in ZnIn2 S4 ‐Based Photocatalysts: Multiscale Modulation Mechanisms,” ChemPhotoChem 10 (2026): e70278, 10.1002/cptc.70278. [DOI] [Google Scholar]
  • 105. Wang Z., Wang Z., Zhu X., et al., “Photodepositing CdS on the Active Cyano Groups Decorated g‐C3 N4 in Z‐Scheme Manner Promotes Visible‐Light‐Driven Hydrogen Evolution,” Small 17 (2021): 2102699, 10.1002/smll.202102699. [DOI] [PubMed] [Google Scholar]
  • 106. Di G., Zhu Z., Zhang H., et al., “Visible‐Light Degradation of Sulfonamides by Z‐Scheme ZnO/g‐C3N4 Heterojunctions With Amorphous Fe2O3 as Electron Mediator,” Journal of Colloid and Interface Science 538 (2019): 256–266, 10.1016/j.jcis.2018.11.100. [DOI] [PubMed] [Google Scholar]
  • 107. Banerjee N., Roy A., and Nair R. G., “Z‐ Scheme Metal Oxide − Chalcogenide Heterojunction for Efficient Charge Transfer Dynamics and Green Hydrogen Production Under Various Irradiation Conditions,” Applied Surface Science 707 (2025): 163645, 10.1016/j.apsusc.2025.163645. [DOI] [Google Scholar]
  • 108. Fakhri H. and Bagheri H., “Two Novel Sets of UiO‐66@ Metal Oxide/Graphene Oxide Z‐Scheme Heterojunction: Insight Into Tetracycline and Malathion Photodegradation,” Journal of Environmental Sciences 91 (2020): 222–236, 10.1016/j.jes.2020.01.013. [DOI] [PubMed] [Google Scholar]
  • 109. Hezam A., Namratha K., Drmosh Q. A., et al., “Direct Z‐Scheme Cs2 O–Bi2 O3 –ZnO Heterostructures for Photocatalytic Overall Water Splitting,” Journal of Materials Chemistry A 6 (2018): 21379–21388, 10.1039/C8TA08033J. [DOI] [Google Scholar]
  • 110. Lei Y., Wan Y., Zou B., et al., “Fabricated Double Z‐Scheme Heterojunction Photocatalyst for Highly Selective Photocatalytic Conversion of Polylactic Acid Plastics,” Chemical Engineering Journal 521 (2025): 166729, 10.1016/j.cej.2025.166729. [DOI] [Google Scholar]
  • 111. Sun D., Chen Y., Yu X., Yin Y., and Tian G., “Novel Defect‐Transit Dual Z‐Scheme Heterojunction: Sulfur‐Doped Carbon Nitride Nanotubes Loaded With Bismuth Oxide and Bismuth Sulfide for Efficient Photocatalytic Amine Oxidation,” Journal of Colloid and Interface Science 674 (2024): 225–237, 10.1016/j.jcis.2024.06.140. [DOI] [PubMed] [Google Scholar]
  • 112. Xie L., Liu G., Suo R., et al., “Construction of a Z‐Scheme CdIn2S4/ZnS Heterojunction for the Enhanced Photocatalytic Hydrogen Evolution,” Journal of Alloys and Compounds 948 (2023): 169692, 10.1016/j.jallcom.2023.169692. [DOI] [Google Scholar]
  • 113. Wang L., Shen D., Zhang H., Mo B., Wu J., and Hou H., “Z‐Scheme In2 S3/NU‐1000 Heterojunction for Boosting Photo‐Oxidation of Sulfide Into Sulfoxide Under Ambient Conditions,” Chemistry – A European Journal 28 (2022): e202103466, 10.1002/chem.202103466. [DOI] [PubMed] [Google Scholar]
  • 114. Li Y., Yu B., Hu Z., and Wang H., “Construction of Direct Z‐Scheme SnS2@ZnIn2S4@kaolinite Heterostructure Photocatalyst for Efficient Photocatalytic Degradation of Tetracycline Hydrochloride,” Chemical Engineering Journal 429 (2022): 132105, 10.1016/j.cej.2021.132105. [DOI] [Google Scholar]
  • 115. Li J., Meng F., Wu H., and Zhang H., “Construction of Ag: ZnIn2S4/Bi2S3 Z‐Scheme Heterojunctions for Boosting Interfacial Charge Separation and Photocatalytic Degradation of TC,” Applied Surface Science 605 (2022): 154763, 10.1016/j.apsusc.2022.154763. [DOI] [Google Scholar]
  • 116. Kavitha T., Rojviroon O., Rajendran R., and Rojviroon T., “Construction of Hybrid 2D g‐C3N4/BiVO4 Photocatalyst Decorated With RGO for Enhancing the H2 Production and Photocatalytic Degradation of Antibiotics,” Journal of Porous Materials 32 (2025): 1457–1469, 10.1007/s10934-025-01778-x. [DOI] [Google Scholar]
  • 117. Song Z., Lu J., Ma H., et al., “Visible Light‐Driven Rhodamine B Degradation and Mechanism Study of AgI/CuBi2O4/AgBr Z‐Scheme Heterojunction Photocatalyst,” ChemistrySelect 10 (2025): e01089, 10.1002/slct.202501089. [DOI] [Google Scholar]
  • 118. Toolabi A., Tahergorabi M., Mehralipour J., Seyedi N., and Nasseh N., “Photocatalytic Degradation of Acetaminophen by g‐C3N4/CQD/Ag Nanocomposites From Aqueous Media,” Journal of Composites Science 9 (2025): 197, 10.3390/jcs9050197. [DOI] [Google Scholar]
  • 119. Mullakkattuthodi S., Thozhuthuparambil T., and Narayanan B. N., “Mesoporous Magnetic Fe3O4/P‐Doped g‐C3N4 as a High Capacitance Electrode for Supercapacitor Applications,” Journal of Materials Science 60 (2025): 17121, 10.1007/s10853-025-11375-7. [DOI] [Google Scholar]
  • 120. Zhao X., Lu Z., Ji R., Zhang M., Yi C., and Yan Y., “Biomass Carbon Modified Z‐Scheme g‐C3N4/Co3O4 Heterojunction With Enhanced Visible‐Light Photocatalytic Activity,” Catalysis Communications 112 (2018): 49–52, 10.1016/j.catcom.2018.04.003. [DOI] [Google Scholar]
  • 121. Tian M., Hu C., Yu J., and Chen L., “Carbon Quantum Dots (CQDs) Mediated Z‐Scheme g–C3N4–CQDs/BiVO4 Heterojunction With Enhanced Visible Light Photocatalytic Degradation of Paraben,” Chemosphere 323 (2023): 138248, 10.1016/j.chemosphere.2023.138248. [DOI] [PubMed] [Google Scholar]
  • 122. Liu Y., Liu C., Shi C., et al., “Carbon‐Based Quantum Dots (QDs) Modified Ms/Tz‐BiVO4 Heterojunction With Enhanced Photocatalytic Performance for Water Purification,” Journal of Alloys and Compounds 881 (2021): 160437, 10.1016/j.jallcom.2021.160437. [DOI] [Google Scholar]
  • 123. Altan O. and Metin Ö., “Boosting Formic Acid Dehydrogenation via the Design of a Z‐Scheme Heterojunction Photocatalyst: The Case of Graphitic Carbon Nitride/Ag/Ag3PO4‐AgPd Quaternary Nanocomposites,” Applied Surface Science 535 (2021): 147740, 10.1016/j.apsusc.2020.147740. [DOI] [Google Scholar]
  • 124. Luo S., Li S., Zhang S., Cheng Z., Nguyen T. T., and Guo M., “Visible‐Light‐Driven Z‐Scheme Protonated g‐C3N4/Wood Flour Biochar/BiVO4 Photocatalyst With Biochar as Charge‐Transfer Channel for Enhanced RhB Degradation and Cr(VI) Reduction,” Science of the Total Environment 806 (2022): 150662, 10.1016/j.scitotenv.2021.150662. [DOI] [PubMed] [Google Scholar]
  • 125. Zhang Y., Ju P., Hao L., Zhai X., Jiang F., and Sun C., “Novel Z‐Scheme MoS2/Bi2WO6 Heterojunction With Highly Enhanced Photocatalytic Activity Under Visible Light Irradiation,” Journal of Alloys and Compounds 854 (2021): 157224, 10.1016/j.jallcom.2020.157224. [DOI] [Google Scholar]
  • 126. Cui Y., Yuan P., Wang F., et al., “Construction and Mechanistic Insights of 2D/2D Z‐Scheme Bi3TiNbO9/BiOBr Heterojunction for Enhanced Photocatalytic Organic Pollutant Removal,” Journal of Alloys and Compounds 980 (2024): 173671, 10.1016/j.jallcom.2024.173671. [DOI] [Google Scholar]
  • 127. Ma Y., Lv P., Duan F., et al., “Direct Z‐Scheme Bi2S3/BiFeO3 Heterojunction Nanofibers With Enhanced Photocatalytic Activity,” Journal of Alloys and Compounds 834 (2020): 155158, 10.1016/j.jallcom.2020.155158. [DOI] [Google Scholar]
  • 128. Lai J., Xiao P., Li Y., Cui S., Yang J., and Lian H., “Visible Light and Iodate/Iodide Mediated Degradation of Bisphenol a by Self‐Assembly 3D Hierarchical BiOIO3/Bi5O7I Z‐Scheme Heterojunction: Intermediates Identification, Radical Mechanism and DFT Calculation,” Journal of Hazardous Materials 448 (2023): 130908, 10.1016/j.jhazmat.2023.130908. [DOI] [PubMed] [Google Scholar]
  • 129. Li B., Lai C., Xu P., et al., “Facile Synthesis of Bismuth Oxyhalogen‐Based Z‐Scheme Photocatalyst for Visible‐Light‐Driven Pollutant Removal: Kinetics, Degradation Pathways and Mechanism,” Journal of Cleaner Production 225 (2019): 898–912, 10.1016/j.jclepro.2019.04.012. [DOI] [Google Scholar]
  • 130. Ogawa K., Nakada A., Suzuki H., et al., “Flux Synthesis of Layered Oxyhalide Bi4 NbO8 Cl Photocatalyst for Efficient Z ‐Scheme Water Splitting Under Visible Light,” ACS Applied Materials & Interfaces 11 (2019): 5642–5650, 10.1021/acsami.8b06411. [DOI] [PubMed] [Google Scholar]
  • 131. Kong B., Liu Z., Wang J., et al., “Novel Z‐Scheme BiOM1– xIx (M = Cl, Br)/β‐Bi2 O3 ‐(001) and BiOI/β‐Bi2 O3 ‐(001) Heterojunction Photocatalysts With O Vacancies: A Study on the Hybrid Density Functional Approach,” The Journal of Physical Chemistry C 126 (2022): 11788–11799, 10.1021/acs.jpcc.2c02831. [DOI] [Google Scholar]
  • 132. Zhu G., Li S., Gao J., et al., “Constructing a 2D/2D Bi2O2CO3/Bi4O5Br2 Heterostructure as a Direct Z‐Scheme Photocatalyst With Enhanced Photocatalytic Activity for NOx Removal,” Applied Surface Science 493 (2019): 913–925, 10.1016/j.apsusc.2019.07.119. [DOI] [Google Scholar]
  • 133. Zhao C., Li Y., Chu H., et al., “Construction of Direct Z‐Scheme Bi5O7I/UiO‐66‐NH2 Heterojunction Photocatalysts for Enhanced Degradation of Ciprofloxacin: Mechanism Insight, Pathway Analysis and Toxicity Evaluation,” Journal of Hazardous Materials 419 (2021): 126466, 10.1016/j.jhazmat.2021.126466. [DOI] [PubMed] [Google Scholar]
  • 134. Ding L., Qi K., Huang Z., et al., “2030 Roadmap on Two‐Dimensional Materials for Energy Storage and Conversion,” Chinese Chemical Letters 37 (2026): 112242, 10.1016/j.cclet.2025.112242. [DOI] [Google Scholar]
  • 135. Sannigrahi S., Ghosh A., Ball B., and Sarkar P., “Exploring the Ti2 CO2 –WSe2 Heterostructure as a Direct Z ‐Scheme Photocatalyst for Water Splitting: A Non‐Adiabatic Study,” The Journal of Physical Chemistry C 126 (2022): 20852–20863, 10.1021/acs.jpcc.2c06171. [DOI] [Google Scholar]
  • 136. Bai P., Xu W., Shi L., et al., “Two‐Dimensional Direct Z ‐Scheme LiInP2 S6/XTe2 (X = Mo and W) Heterostructures for Photocatalysis,” The Journal of Physical Chemistry C 129 (2025): 11698, 10.1021/acs.jpcc.5c01999. [DOI] [Google Scholar]
  • 137. Xie M., Shang Y., Xu X., Liu X., Li H., and Li X., “Two‐Dimensional Janus Van der Waals Heterojunctions SnX2 @SnSSe (X = S, Se) as Promising Solar‐Driven Water‐Splitting Photocatalysts,” ACS Applied Energy Materials 7 (2024): 31–40, 10.1021/acsaem.3c02081. [DOI] [Google Scholar]
  • 138. Tang Y., Wang Y., Cheng X., and Zhang H., “Strain and Electric Field Engineering of G‐ZnO/SnXY (X, Y = S, Se) S‐Scheme Heterostructures for Photocatalyst and Electronic Device Applications: A Hybrid DFT Calculation,” ACS Applied Materials & Interfaces 16 (2024): 27381–27393, 10.1021/acsami.4c03666. [DOI] [PubMed] [Google Scholar]
  • 139. Wu Y., Wang H., Tu W., et al., “Quasi‐Polymeric Construction of Stable Perovskite‐Type LaFeO3/g‐C3N4 Heterostructured Photocatalyst for Improved Z‐Scheme Photocatalytic Activity via Solid p‐n Heterojunction Interfacial Effect,” Journal of Hazardous Materials 347 (2018): 412–422, 10.1016/j.jhazmat.2018.01.025. [DOI] [PubMed] [Google Scholar]
  • 140. Han B., Zhu P., Liu Y., et al., “Enhanced Photocatalytic Degradation Activity via a Stable Perovskite‐Type LaFeO3/In2S3 Z‐Scheme Heterostructured Photocatalyst: Unobstructed Photoexcited Charge Behavior of Z Scheme Photocatalytic System Exploration,” Journal of Alloys and Compounds 901 (2022): 163628, 10.1016/j.jallcom.2022.163628. [DOI] [Google Scholar]
  • 141. Sohrabian M., Mahdikhah V., Alimohammadi E., and Sheibani S., “Improved Photocatalytic Performance of SrTiO3 Through a Z‐Scheme Polymeric‐Perovskite Heterojunction With g‐C3N4 and Plasmonic Resonance of Ag Mediator,” Applied Surface Science 618 (2023): 156682, 10.1016/j.apsusc.2023.156682. [DOI] [Google Scholar]
  • 142. Liu Z.‐L., Liu R.‐R., Mu Y.‐F., et al., “In Situ Construction of Lead‐Free Perovskite Direct Z‐Scheme Heterojunction Cs3 Bi2 I9/Bi2 WO6 for Efficient Photocatalysis of CO2 Reduction,” Solar RRL 5 (2021): 2000691, 10.1002/solr.202000691. [DOI] [Google Scholar]
  • 143. Zhou S. and Mao Y., “First‐Principles Study on Direct Z‐Scheme SnC/SnS2 Heterostructures for Photocatalytic Water Splitting,“ Chemistry 7 (2025): 76, 10.3390/chemistry7030076. [DOI] [Google Scholar]
  • 144. Yang F., Record M.‐C., and Boulet P., “Janus Ga2SSe‐Based Van der Waals Heterojunctions as a Class of Promising Candidates for Photocatalytic Water Splitting: A DFT Investigation,” Crystals 15 (2025): 728, 10.3390/cryst15080728. [DOI] [Google Scholar]
  • 145. Dai M.‐Y., Zhao X.‐C., Lei B.‐C., et al., “First Principle Study on the Z‐Type Characteristic Modulation of GaN/g‐C3N4 Heterojunction,” Molecules 29 (2024): 5355, 10.3390/molecules29225355. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 146. Sasikumar K., Rajamanikandan R., and Ju H., “Construction of Z‐Scheme ZIF67/NiMoO4 Heterojunction for Enhanced Photocatalytic Degradation of Antibiotic Pollutants,” Materials 17 (2024): 6225, 10.3390/ma17246225. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 147. Al‐Shami A., Sibari A., Mansouri Z., et al., “Photocatalytic Properties of ZnO: Al/MAPbI3/Fe2O3 Heterostructure: First‐Principles Calculations,” International Journal of Molecular Sciences 24 (2023): 4856, 10.3390/ijms24054856. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 148. Wang M., Tan G., Ren H., Xia A., and Liu Y., “Direct Double Z‐Scheme O‐g‐C3N4/Zn2SnO4N/ZnO Ternary Heterojunction Photocatalyst With Enhanced Visible Photocatalytic Activity,” Applied Surface Science 492 (2019): 690–702, 10.1016/j.apsusc.2019.06.260. [DOI] [Google Scholar]
  • 149. Liu H., Zhou H., Liu X., et al., “Engineering Design of Hierarchical g‐C3N4@Bi/BiOBr Ternary Heterojunction With Z‐Scheme System for Efficient Visible‐Light Photocatalytic Performance,” Journal of Alloys and Compounds 798 (2019): 741–749, 10.1016/j.jallcom.2019.05.303. [DOI] [Google Scholar]
  • 150. Yu H., Wang D., Zhao B., et al., “Enhanced Photocatalytic Degradation of Tetracycline Under Visible Light by Using a Ternary Photocatalyst of Ag3PO4/AgBr/g‐C3N4 With Dual Z‐Scheme Heterojunction,“ Separation and Purification Technology 237 (2020): 116365, 10.1016/j.seppur.2019.116365. [DOI] [Google Scholar]
  • 151. Kang J., Jin C., Li Z., Wang M., Chen Z., and Wang Y., “Dual Z‐Scheme MoS2/g‐C3N4/Bi24O31Cl10 Ternary Heterojunction Photocatalysts for Enhanced Visible‐Light Photodegradation of Antibiotic,” Journal of Alloys and Compounds 825 (2020): 153975, 10.1016/j.jallcom.2020.153975. [DOI] [Google Scholar]
  • 152. Zhu W., Yang Q., Du J., et al., “A Z‐Scheme CuO–ZnO–ZnS–CuS Quaternary Nanocomposite for Solar‐Light‐Driven Photocatalytic Performance,” Current Applied Physics 39 (2022): 113–121, 10.1016/j.cap.2022.04.014. [DOI] [Google Scholar]
  • 153. Zhu W., Du J., and Yang Q., “Construction of a Double Z‐Scheme CuO/Cu2 O/CuS/ZnO Quaternary Heterojunction Photocatalyst With Enhanced Solar‐Driven Photocatalytic Performance for Sulfamethoxazole Degradation,” ChemistrySelect 9 (2024): e202400261, 10.1002/slct.202400261. [DOI] [Google Scholar]
  • 154. Su Y., Zhao Z., Li S., Liu F., and Zhang Z., “Rational Design of a Novel Quaternary ZnO@ZnS/Ag@Ag2 S Nanojunction System for Enhanced Photocatalytic H2 Production,” Inorganic Chemistry Frontiers 5 (2018): 3074–3081, 10.1039/C8QI00828K. [DOI] [Google Scholar]
  • 155. Nguyen V. Q., Mahadadalkar M. A., Rabie A. M., and Shim J.‐J., “Microwave‐Assisted Synthesis of a Z‐Scheme Heterojunction Ag/AgBr@BiOBr/Bi2 O3 Photocatalyst for Efficient Organic Pollutant Degradation Under Visible Light,” Environmental Science: Nano 9 (2022): 1724–1737, 10.1039/D1EN01166A. [DOI] [Google Scholar]
  • 156. Lee J., Kim H., Lee T., Jang W., Lee K. H., and Soon A., “Revisiting Polytypism in Hexagonal Ternary Sulfide ZnIn2 S4 for Photocatalytic Hydrogen Production Within the Z‐Scheme,” Chemistry of Materials 31 (2019): 9148–9155, 10.1021/acs.chemmater.9b03539. [DOI] [Google Scholar]
  • 157. Qi K., Ding L., Rosaiah P., et al., “2030 Roadmap on Porous Materials for Energy and Environmental Applications,” Chinese Chemical Letters 37 (2026): 112181, 10.1016/j.cclet.2025.112181. [DOI] [Google Scholar]
  • 158. Wang D., Yu X., Feng Q., et al., “In‐Situ Growth of β‐Bi2O3 Nanosheets on g‐C3N4 to Construct Direct Z‐Scheme Heterojunction With Enhanced Photocatalytic Activities,” Journal of Alloys and Compounds 859 (2021): 157795, 10.1016/j.jallcom.2020.157795. [DOI] [Google Scholar]
  • 159. Hong Y., Jiang Y., Li C., et al., “In‐Situ Synthesis of Direct Solid‐State Z‐Scheme V2O5/g‐C3N4 Heterojunctions With Enhanced Visible Light Efficiency in Photocatalytic Degradation of Pollutants,” Applied Catalysis B: Environmental 180 (2016): 663–673, 10.1016/j.apcatb.2015.06.057. [DOI] [Google Scholar]
  • 160. Lu X., Che W., Hu X., et al., “The Facile Fabrication of Novel Visible‐Light‐Driven Z‐Scheme CuInS2/Bi2WO6 Heterojunction With Intimate Interface Contact by In Situ Hydrothermal Growth Strategy for Extraordinary Photocatalytic Performance,” Chemical Engineering Journal 356 (2019): 819–829, 10.1016/j.cej.2018.09.087. [DOI] [Google Scholar]
  • 161. Qiu F., Li W., Wang F., Li H., Liu X., and Sun J., “In‐Situ Synthesis of Novel Z‐Scheme SnS2/BiOBr Photocatalysts With Superior Photocatalytic Efficiency Under Visible Light,” Journal of Colloid and Interface Science 493 (2017): 1–9, 10.1016/j.jcis.2016.12.066. [DOI] [PubMed] [Google Scholar]
  • 162. Guo X., Liu X., Yan J., and Liu S., “Heteroepitaxial Growth of Core‐Shell ZnO/CdS Heterostructure for Efficient and Stable Photocatalytic Hydrogen Generation,” International Journal of Hydrogen Energy 47 (2022): 34410–34420, 10.1016/j.ijhydene.2022.08.032. [DOI] [Google Scholar]
  • 163. Li J., Yu X., Xue W., Nie L., Huang H., and Zhong C., “Engineering the Direct Z‐Scheme Systems Over Lattice Intergrown of MOF‐ON‐MOF for Selective CO2 Photoreduction to CO,” AIChE Journal 69 (2023): e17906, 10.1002/aic.17906. [DOI] [Google Scholar]
  • 164. Huec T. Le, López‐Francés A., Abánades Lázaro I., Navalón S., Baldoví H. G., and Giménez‐Marqués M., “Heteroepitaxial MOF‐on‐MOF Photocatalyst for Solar‐Driven Water Splitting,” ACS Nano 18 (2024): 20201–20212, 10.1021/acsnano.4c03442. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 165. Zhang N., Xie S., Weng B., and Xu Y.‐J., “Vertically Aligned ZnO–Au@CdS Core–Shell Nanorod Arrays as an All‐Solid‐State Vectorial Z‐Scheme System for Photocatalytic Application,” Journal of Materials Chemistry A 4 (2016): 18804–18814, 10.1039/C6TA07845A. [DOI] [Google Scholar]
  • 166. Awa K., Naya S., Fujishima M., and Tada H., “A Three‐Component Plasmonic Photocatalyst Consisting of Gold Nanoparticle and TiO2 –SnO2 Nanohybrid With Heteroepitaxial Junction: Hydrogen Peroxide Synthesis,” The Journal of Physical Chemistry C 124 (2020): 7797–7802, 10.1021/acs.jpcc.9b11875. [DOI] [Google Scholar]
  • 167. Chen B., Zhang J., Yu J., et al., “Rational Design of All‐Solid‐State TiO2 ‐x/Cu/ZnO Z‐Scheme Heterojunction via ALD‐Assistance for Enhanced Photocatalytic Activity,” Journal of Colloid and Interface Science 607 (2022): 760–768, 10.1016/j.jcis.2021.09.023. [DOI] [PubMed] [Google Scholar]
  • 168. Kim W. J., Jang E., and Park T. J., “Enhanced Visible‐Light Photocatalytic Activity of ZnS/g‐C3N4 Type‐II Heterojunction Nanocomposites Synthesized With Atomic Layer Deposition,” Applied Surface Science 419 (2017): 159–164, 10.1016/j.apsusc.2017.05.012. [DOI] [Google Scholar]
  • 169. Li N., Tian Y., Zhao J., et al., “Z‐Scheme 2D/3D g‐C3N4@ZnO With Enhanced Photocatalytic Activity for Cephalexin Oxidation Under Solar Light,” Chemical Engineering Journal 352 (2018): 412–422, 10.1016/j.cej.2018.07.038. [DOI] [Google Scholar]
  • 170. Hsu W.‐P., Mishra M., Liu W.‐S., Su C.‐Y., and Perng T.‐P., “Fabrication of Direct Z‐Scheme Ta3N5‐WO2.72 Film Heterojunction Photocatalyst for Enhanced Hydrogen Evolution,” Applied Catalysis B: Environmental 201 (2017): 511–517, 10.1016/j.apcatb.2016.08.060. [DOI] [Google Scholar]
  • 171. Liu W., Liu D., Tang H., Sun Z., and Duan L., “Synergistic Enhancement of Z‐Scheme (SiO2/TiO2)/Bi2WO6 Heterojunction by Oxygen Vacancies and Interfacial Electric Field for Efficient Degradation of Antibiotics,” Separation and Purification Technology 361 (2025): 131462, 10.1016/j.seppur.2025.131462. [DOI] [Google Scholar]
  • 172. Bi Q., Gao Y., Wang Z., et al., “Preparation of a Direct Z‐Scheme Thin‐Film Electrode Based on CdS QD‐Sensitized BiOI/WO3 and Its Photoelectrocatalytic Performance,” Colloids and Surfaces A: Physicochemical and Engineering Aspects 599 (2020): 124849, 10.1016/j.colsurfa.2020.124849. [DOI] [Google Scholar]
  • 173. Liang Y.‐C. and Kuo C.‐C., “Construction of Broad‐Spectrum Photocatalyst Films Through Interface Engineering: Orchestrating Bi Nanoparticles in TiO2/BiVO4 Z‐Scheme Heterojunctions,” Journal of Science: Advanced Materials and Devices 9 (2024): 100764, 10.1016/j.jsamd.2024.100764. [DOI] [Google Scholar]
  • 174. Sang P. and Kim J. H., “Role of g‐C3N4 in Fabrication of BiVO4/WO3 Z‐Scheme Heterojunction for High Photoelectrochemical Performances With Enhanced Light Harvesting,” International Journal of Precision Engineering and Manufacturing‐Green Technology 10 (2023): 1015–1026, 10.1007/s40684-022-00478-0. [DOI] [Google Scholar]
  • 175. Fendrich M., Bajpai O. P., Edla R., et al., “Towards the Development of a Z‐Scheme FeOx/g‐C3N4 Thin Film and Perspectives for Ciprofloxacin Visible Light‐Driven Photocatalytic Degradation,” Applied Sciences 13 (2023): 10591, 10.3390/app131910591. [DOI] [Google Scholar]
  • 176. Li X., Xiong J., Xu Y., Feng Z., and Huang J., “Defect‐Assisted Surface Modification Enhances the Visible Light Photocatalytic Performance of g‐C3N4@C‐TiO2 Direct Z‐Scheme Heterojunctions,” Chinese Journal of Catalysis 40 (2019): 424–433, 10.1016/S1872-2067(18)63183-3. [DOI] [Google Scholar]
  • 177. Charles H., Chengula P. J., Pawar R. C., Khan H., Kim S., and Lee C. S., “Synergistic Effect of Surface Modification and Effective Interfacial Charge Transfer Over Faceted g‐C3N4/ZnSe Heterojunction to Enhance CO2 Photoreduction Activity,” Journal of Water Process Engineering 56 (2023): 104307, 10.1016/j.jwpe.2023.104307. [DOI] [Google Scholar]
  • 178. Wang Y.‐Q., Yang C., and Gan L.‐H., “Preparation of Direct Z‐Scheme Bi2WO6/TiO2 Heterojunction by One‐Step Solvothermal Method and Enhancement Mechanism of Photocatalytic H2 Production,” International Journal of Hydrogen Energy 48 (2023): 19372–19384, 10.1016/j.ijhydene.2023.01.372. [DOI] [Google Scholar]
  • 179. Hu T., Yang Y., Dai K., Zhang J., and Liang C., “A Novel Z‐Scheme Bi2MoO6/BiOBr Photocatalyst for Enhanced Photocatalytic Activity Under Visible Light Irradiation,” Applied Surface Science 456 (2018): 473–481, 10.1016/j.apsusc.2018.06.186. [DOI] [Google Scholar]
  • 180. Fu Y., Mao Y., Wang L., et al., “Fabrication of AgI/Ce‐2MI Z‐Scheme Heterojunction for Enhanced Photoreduction of Cr(VI) Under Visible Light Irradiation,” Journal of Alloys and Compounds 967 (2023): 171662, 10.1016/j.jallcom.2023.171662. [DOI] [Google Scholar]
  • 181. Luo R., Zhong X., Tan B., et al., “Synergistic Construction of Defects in Z‐Scheme B‐BiVO4/Bi2MoO6‐β Heterojunction via the Co‐Modification of β‐Particles and B‐Doped for Enhancing Photocatalytic Reduction of Ciprofloxacin and as(III),” Journal of Alloys and Compounds 1037 (2025): 182363, 10.1016/j.jallcom.2025.182363. [DOI] [Google Scholar]
  • 182. Liu X., Ma L., Wang X., et al., “Structuring Dual Z‐Scheme Heterojunction and Boosting Surface Reaction by Bifunctional NiCoP Modified TiO2/g‐C3N4 for Improving the Photocatalytic Activity,” International Journal of Hydrogen Energy 62 (2024): 127–139, 10.1016/j.ijhydene.2024.03.020. [DOI] [Google Scholar]
  • 183. Xue W., Peng Z., Huang D., et al., “In Situ Synthesis of Visible‐Light‐Driven Z‐Scheme AgI/Bi2WO6 Heterojunction Photocatalysts With Enhanced Photocatalytic Activity,” Ceramics International 45 (2019): 6340–6349, 10.1016/j.ceramint.2018.12.119. [DOI] [Google Scholar]
  • 184. Xu L., Chen W., Ke S., et al., “Construction of Heterojunction Bi/Bi5O7I/Sn3O4 for Efficient Noble‐Metal‐Free Z‐Scheme Photocatalytic H2 Evolution,” Chemical Engineering Journal 382 (2020): 122810, 10.1016/j.cej.2019.122810. [DOI] [Google Scholar]
  • 185. Mishra P., Behera A., Kandi D., Ratha S., and Parida K., “Novel Magnetic Retrievable Visible‐Light‐Driven Ternary Fe3 O4 @NiFe2 O4/Phosphorus‐Doped g‐C3 N4 Nanocomposite Photocatalyst With Significantly Enhanced Activity Through a Double‐Z‐Scheme System,” Inorganic Chemistry 59 (2020): 4255–4272, 10.1021/acs.inorgchem.9b02996. [DOI] [PubMed] [Google Scholar]
  • 186. Li Z., Chen H., Li Y., et al., “Porous Direct Z‐Scheme Heterostructures of S‐Deficient CoS/CdS Hexagonal Nanoplates for Robust Photocatalytic H2 Generation,” CrystEngComm 24 (2022): 404–416, 10.1039/D1CE01453F. [DOI] [Google Scholar]
  • 187. Zhu J., Zhang M., Xiong J., Yan Y., Li W., and Cheng G., “Electrostatically Assembled Construction of Ternary TiO2‐Cu@C Hybrid With Enhanced Solar‐to‐Hydrogen Evolution Employing Amorphous Carbon Dots as Electronic Mediator,” Chemical Engineering Journal 375 (2019): 121902, 10.1016/j.cej.2019.06.030. [DOI] [Google Scholar]
  • 188. Zhang R., Wang H., Li Y., et al., “Investigation on the Photocatalytic Hydrogen Evolution Properties of Z‐Scheme Au NPs/CuInS2/NCN‐CNx Composite Photocatalysts,” ACS Sustainable Chemistry & Engineering 9 (2021): 7286–7297, 10.1021/acssuschemeng.1c01234. [DOI] [Google Scholar]
  • 189. Shen R., Xie J., Ding Y., et al., “Carbon Nanotube‐Supported Cu3 P as High‐Efficiency and Low‐Cost Cocatalysts for Exceptional Semiconductor‐Free Photocatalytic H2 Evolution,” ACS Sustainable Chemistry & Engineering 7 (2019): 3243–3250, 10.1021/acssuschemeng.8b05185. [DOI] [Google Scholar]
  • 190. Acar E. G., Yılmaz S., Eroglu Z., et al., “Black Phosphorus/WS2‐TM (TM: Ni, Co) Heterojunctions for Photocatalytic Hydrogen Evolution Under Visible Light Illumination,” Catalysts 13 (2023): 1006, 10.3390/catal13061006. [DOI] [Google Scholar]
  • 191. Raghavan A., Sarkar S., Nagappagari L. R., Bojja S., MuthukondaVenkatakrishnan S., and Ghosh S., “Decoration of Graphene Quantum Dots on TiO2 Nanostructures: Photosensitizer and Cocatalyst Role for Enhanced Hydrogen Generation,” Industrial & Engineering Chemistry Research 59 (2020): 13060–13068, 10.1021/acs.iecr.0c01663. [DOI] [Google Scholar]
  • 192. Guo X., Liu X., Shan J., Zhao G., and Liu S., “Heterojunction Design between WSe2 Nanosheets and TiO2 for Efficient Photocatalytic Hydrogen Generation,” Catalysts 12 (2022): 1668, 10.3390/catal12121668. [DOI] [Google Scholar]
  • 193. Gao D., Wu X., Wang P., Xu Y., Yu H., and Yu J., “Simultaneous Realization of Direct Photoinduced Deposition and Improved H2 ‐Evolution Performance of Sn‐Nanoparticle‐Modified TiO2 Photocatalyst,” ACS Sustainable Chemistry & Engineering 7 (2019): 10084–10094, 10.1021/acssuschemeng.9b01516. [DOI] [Google Scholar]
  • 194. Liu J., Qi K., Xiang X., Jamal Sisi A., Khataee A., and Xu L., “Covalent Organic Framework‐Based Photocatalysts From Synthesis to Applications,” Energy & Environ Materials 8 (2025): e70071, 10.1002/eem2.70071. [DOI] [Google Scholar]
  • 195. Lu J., Lu Y., Rosaiah P., Lin S., Amir Z., and Qi K., “ZnCo2O4‐ZnO S‐Scheme Heterojunction for Photocatalytic Degradation of Cefalexin and Antimicrobial Properties,” Chemical Research in Chinese Universities 41 (2025): 799–811, 10.1007/s40242-025-5089-6. [DOI] [Google Scholar]
  • 196. Wang B., Zhao J., Chen H., et al., “Unique Z‐Scheme Carbonized Polymer Dots/Bi4O5Br2 Hybrids for Efficiently Boosting Photocatalytic CO2 Reduction,” Applied Catalysis B: Environmental 293 (2021): 120182, 10.1016/j.apcatb.2021.120182. [DOI] [Google Scholar]
  • 197. Zhang X., Xia L., Liu C., Cheng X., and Yang Z., “A Direct Z‐Scheme Heterojunction g‐C3 N4/α‐Fe2 O3 Nanocomposite for Enhanced Polymer‐Containing Oilfield Sewage Degradation Under Visible Light,” Environmental Science: Water Research & Technology 8 (2022): 1965–1975, 10.1039/D2EW00342B. [DOI] [Google Scholar]
  • 198. Bajorowicz B., Kowalska E., Nadolna J., et al., “Preparation of CdS and Bi2 S3 Quantum Dots Co‐Decorated Perovskite‐Type KNbO3 Ternary Heterostructure With Improved Visible Light Photocatalytic Activity and Stability for Phenol Degradation,” Dalton Transactions 47 (2018): 15232–15245, 10.1039/C8DT03094D. [DOI] [PubMed] [Google Scholar]
  • 199. Farooq U. and Ahmad T., “High Performance NaNbO3/CdS/Bi2S3 Ternary Heterostructured Photoelectrocatalysts for Efficient OER Activity,” International Journal of Hydrogen Energy 64 (2024): 290–300, 10.1016/j.ijhydene.2024.03.292. [DOI] [Google Scholar]
  • 200. Zhang L., Chen L., Xia Y., et al., “Modification of Polymeric Carbon Nitride With Au–CeO2 Hybrids to Improve Photocatalytic Activity for Hydrogen Evolution,” Molecules 27 (2022): 7489, 10.3390/molecules27217489. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 201. Pu Y.‐C., Ma H., Sajben N., et al., “Dependence of Interfacial Charge Transfer on Bifunctional Aromatic Molecular Linkers in CdSe Quantum Dot Sensitized TiO2 Photoelectrodes,” ACS Applied Energy Materials 1 (2018): 2907–2917, 10.1021/acsaem.8b00563. [DOI] [Google Scholar]
  • 202. Ma J., Du Q., Ge H., and Zhang Q., “Fabrication of Core–Shell TiO2@CuS Nanocomposite via a Bifunctional Linker‐Assisted Synthesis and Its Photocatalytic Performance,” Journal of Materials Science 54 (2019): 2928–2939, 10.1007/s10853-018-3054-1. [DOI] [Google Scholar]
  • 203. Yu T., Wang D., Li L., Song W., Pang X., and Liang C., “A Novel Organic/Inorganic Dual Z‐Scheme Photocatalyst With Visible‐Light Response for Organic Pollutants Degradation,” Catalysts 13 (2023): 1391, 10.3390/catal13111391. [DOI] [Google Scholar]
  • 204. Yang X., Gong R., Dong Z., et al., “Polymeric Carbon Nitride‐CNTs‐Ferric Oxide All‐Solid Z‐Scheme Heterojunction With Improved Photocatalytic Activity Towards Organic Dye Removal,” Catalysts 14 (2024): 516, 10.3390/catal14080516. [DOI] [Google Scholar]
  • 205. Luan J., Li J., Yao Y., et al., “Synthesis, Characterization of the Novel Heterojunction Photocatalyst Sm2NdSbO7/BiDyO3 for Efficient Photodegradation of Methyl Parathion,” Catalysts 14 (2024): 346, 10.3390/catal14060346. [DOI] [Google Scholar]
  • 206. Yin X., Sun X., Li D., et al., “2D/2D Phosphorus‐Doped g‐C3N4/Bi2WO6 Direct Z‐Scheme Heterojunction Photocatalytic System for Tetracycline Hydrochloride (TC‐HCl) Degradation,” International Journal of Environmental Research and Public Health 19 (2022): 14935, 10.3390/ijerph192214935. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 207. Xing C., Liu Y., Zhang Y., et al., “A Direct Z‐Scheme for the Photocatalytic Hydrogen Production From a Water Ethanol Mixture on CoTiO3/TiO2 Heterostructures,” ACS Applied Materials & Interfaces 13 (2021): 449–457, 10.1021/acsami.0c17004. [DOI] [PubMed] [Google Scholar]
  • 208. Ding L., Harikrishnan L., Liu S., Pitcheri R., and Qi K., “Covalent Organic Framework‐Based S‐Scheme Photocatalysts: Mechanistic Insights and Emerging Applications in Energy and Environment,” Nano Materials Science (2026): S2589965126000048, 10.1016/j.nanoms.2026.01.004. [DOI] [Google Scholar]
  • 209. Xing X., Zhu H., Zhang M., Hou L., Li Q., and Yang J., “Interfacial Oxygen Vacancy Layer of a Z‐Scheme BCN–TiO2 Heterostructure Accelerating Charge Carrier Transfer for Visible Light Photocatalytic H2 Evolution,” Catalysis Science & Technology 8 (2018): 3629–3637, 10.1039/C8CY01035H. [DOI] [Google Scholar]
  • 210. Quach T.‐A., Gopalakrishnan V. N., Becerra J., et al., “Z‐Scheme Heterojunction of Chemically Integrated COF‐366‐Co/UiO‐66‐NH2 MOFs Nanocomposites for Selective Production of CO via CO2 Solar‐Drive Photoreduction,” Catalysis Today 421 (2023): 114218, 10.1016/j.cattod.2023.114218. [DOI] [Google Scholar]
  • 211. Lu X., Chen Z., Hu Z., et al., “Boosted Charge Transfer for Highly Efficient Photosynthesis of H2 O2 Over Z‐Scheme I− /K+ Co‐Doped g‐C3 N4/Metal–Organic‐Frameworks in Pure Water Under Visible Light,” Advanced Energy Materials 14 (2024): 2401873, 10.1002/aenm.202401873. [DOI] [Google Scholar]
  • 212. Wang K., Zhang G., Li J., Li Y., and Wu X., “0D/2D Z‐Scheme Heterojunctions of Bismuth Tantalate Quantum Dots/Ultrathin g‐C3 N4 Nanosheets for Highly Efficient Visible Light Photocatalytic Degradation of Antibiotics,” ACS Applied Materials & Interfaces 9 (2017): 43704–43715, 10.1021/acsami.7b14275. [DOI] [PubMed] [Google Scholar]
  • 213. Sabbah A., Shown I., Qorbani M., et al., “Boosting Photocatalytic CO2 Reduction in a ZnS/ZnIn2S4 Heterostructure Through Strain‐Induced Direct Z‐Scheme and a Mechanistic Study of Molecular CO2 Interaction Thereon,” Nano Energy 93 (2022): 106809, 10.1016/j.nanoen.2021.106809. [DOI] [Google Scholar]
  • 214. Liu X., Jin A., Jia Y., et al., “Synergy of Adsorption and Visible‐Light Photocatalytic Degradation of Methylene Blue by a Bifunctional Z‐Scheme Heterojunction of WO3/g‐C3N4 ,” Applied Surface Science 405 (2017): 359–371, 10.1016/j.apsusc.2017.02.025. [DOI] [Google Scholar]
  • 215. You Y., Wang S., Xiao K., Ma T., Zhang Y., and Huang H., “Z‐Scheme g‐C3 N4/Bi4 NbO8 Cl Heterojunction for Enhanced Photocatalytic Hydrogen Production,” ACS Sustainable Chemistry & Engineering 6 (2018): 16219–16227, 10.1021/acssuschemeng.8b03075. [DOI] [Google Scholar]
  • 216. Bhatt H., Goswami T., Yadav D. K., et al., “Ultrafast Hot Electron Transfer and Trap‐State Mediated Charge Carrier Separation Toward Enhanced Photocatalytic Activity in g‐C3 N4/ZnIn2 S4 Heterostructure,” The Journal of Physical Chemistry Letters 12 (2021): 11865–11872, 10.1021/acs.jpclett.1c03356. [DOI] [PubMed] [Google Scholar]
  • 217. Yaw C. S., Günnemann C., Bahnemann D. W., and Chong M. N., “Elucidating the Dynamics and Transfer Pathways of Photogenerated Charge Carriers in V2O5/BiVO4 Heterojunction Photoanodes: A Transient Absorption Spectroscopy Study,” Journal of Alloys and Compounds 1010 (2025): 177011, 10.1016/j.jallcom.2024.177011. [DOI] [Google Scholar]
  • 218. Tong X., Shou J., Song H., Wang Y., Huang L., and Yin L., “Ultrafast Electron Transfer From Crystalline g‐C3 N4 to Pt Revealed by Femtosecond Transient Absorption Spectroscopy,” Energy & Fuels 36 (2022): 11532–11541, 10.1021/acs.energyfuels.2c01365. [DOI] [Google Scholar]
  • 219. Huang H., Zhao J., Du Y., et al., “Direct Z‐Scheme Heterojunction of Semicoherent FAPbBr3/Bi2 WO6 Interface for Photoredox Reaction With Large Driving Force,” ACS Nano 14 (2020): 16689–16697, 10.1021/acsnano.0c03146. [DOI] [PubMed] [Google Scholar]
  • 220. Jiang Y., Liao J.‐F., Chen H.‐Y., et al., “All‐Solid‐State Z‐Scheme α‐Fe2O3/Amine‐RGO/CsPbBr3 Hybrids for Visible‐Light‐Driven Photocatalytic CO2 Reduction,” Chem 6 (2020): 766–780, 10.1016/j.chempr.2020.01.005. [DOI] [Google Scholar]
  • 221. Xu R., Sun B., Ji W., et al., “Construction of a CoNiHHTP MOF/PHI Z‐Scheme Heterojunction for Ppb Level NO2 Photoelectric Sensing With 405 nm Irradiation at RT,” ACS Sensors 9 (2024): 3187–3197, 10.1021/acssensors.4c00509. [DOI] [PubMed] [Google Scholar]
  • 222. Iqbal A., Kafizas A., Sotelo‐Vazquez C., et al., “Charge Transport Phenomena in Heterojunction Photocatalysts: The WO3/TiO2 System as an Archetypical Model,” ACS Applied Materials & Interfaces 13 (2021): 9781–9793, 10.1021/acsami.0c19692. [DOI] [PubMed] [Google Scholar]
  • 223. Wang W., Bai X., Ci Q., Du L., Ren X., and Phillips D. L., “Near‐Field Drives Long‐Lived Shallow Trapping of Polymeric C3 N4 for Efficient Photocatalytic Hydrogen Evolution,” Advanced Functional Materials 31 (2021): 2103978, 10.1002/adfm.202103978. [DOI] [Google Scholar]
  • 224. Murthy D. H. K., Matsuzaki H., Wang Q., et al., “Revealing the Role of the Rh Valence State, La Doping Level and Ru Cocatalyst in Determining the H2 Evolution Efficiency in Doped SrTiO3 Photocatalysts,” Sustainable Energy Fuels 3 (2019): 208–218, 10.1039/C8SE00487K. [DOI] [Google Scholar]
  • 225. Zhang S., Hu N., Su H., et al., “Optimizing Hydrogen Evolution Performance Through Balancing Charge Dynamics Across Sulfur‐Defect‐Engineered CdIn2S4‐NC/MoC Heterojunctions,” Journal of Colloid and Interface Science 700 (2025): 138465, 10.1016/j.jcis.2025.138465. [DOI] [PubMed] [Google Scholar]
  • 226. Wang M., Zeng S., Woldu A. R., and Hu L., “BiVO4/Bi2S3 Z‐Scheme Heterojunction With MnOx as a Cocatalyst for Efficient Photocatalytic CO2 Conversion to Methanol by Pure Water,” Nano Energy 104 (2022): 107925, 10.1016/j.nanoen.2022.107925. [DOI] [Google Scholar]
  • 227. Xia S., Zhang G., Gao Z., et al., “3D Hollow Bi2O3@CoAl‐LDHs Direct Z‐Scheme Heterostructure for Visible‐Light‐Driven Photocatalytic Ammonia Synthesis,” Journal of Colloid and Interface Science 604 (2021): 798–809, 10.1016/j.jcis.2021.07.063. [DOI] [PubMed] [Google Scholar]
  • 228. Luo F., Liu M., Zheng M., et al., “Boosted Charge Separation in Direct Z‐Scheme Heterojunctions of CsPbBr3/Ultrathin Carbon Nitride for Improved Photocatalytic CO2 Reduction,” Journal of Materials Chemistry A 11 (2022): 241–250, 10.1039/D2TA07965H. [DOI] [Google Scholar]
  • 229. Wang Y., Wei W., Li M., Hu S., Zhang J., and Feng R., “In Situ Construction of Z‐Scheme g‐C3 N4/Mg1.1 Al0.3 Fe0.2 O1.7 Nanorod Heterostructures With High N2 Photofixation Ability Under Visible Light,” RSC Advances 7 (2017): 18099–18107, 10.1039/C7RA00097A. [DOI] [Google Scholar]
  • 230. Xiao Y., Wu K., Gu S., et al., “Cellulose Nanocrystal/Bismuth/Bismuth Oxychloride (CNC/Bi/BiOCl) Ternary Z‐Scheme Heterojunction With Dual Oxygen Defects and a Lowered Carboxylic Acid Intermediate (*COOH) Formation Barrier for Efficient Visible‐Light CO2 Photoreduction,” Journal of Colloid and Interface Science 694 (2025): 137736, 10.1016/j.jcis.2025.137736. [DOI] [PubMed] [Google Scholar]
  • 231. Zeng S., Vahidzadeh E., VanEssen C. G., et al., “Optical Control of Selectivity of High Rate CO2 Photoreduction via Interband‐ or Hot Electron Z‐Scheme Reaction Pathways in Au‐TiO2 Plasmonic Photonic Crystal Photocatalyst,” Applied Catalysis B: Environmental 267 (2020): 118644, 10.1016/j.apcatb.2020.118644. [DOI] [Google Scholar]
  • 232. Xie Z., Feng Y., Wang F., et al., “Construction of Carbon Dots Modified MoO3/g‐C3N4 Z‐Scheme Photocatalyst With Enhanced Visible‐Light Photocatalytic Activity for the Degradation of Tetracycline,” Applied Catalysis B: Environmental 229 (2018): 96–104, 10.1016/j.apcatb.2018.02.011. [DOI] [Google Scholar]
  • 233. Zhang Y., Hu Z., Zhang H., Li H., and Yang S., “Uncovering Original Z Scheme Heterojunctions of COF/MOx (M = Ti, Zn, Zr, Sn, Ce, and Nb) With Ascendant Photocatalytic Selectivity for Virtually 99.9% NO‐to‐NO3− Oxidation,” Advanced Functional Materials 33 (2023): 2303851, 10.1002/adfm.202303851. [DOI] [Google Scholar]
  • 234. Chen M., Dai Y., Guo J., Yang H., Liu D., and Zhai Y., “Solvothermal Synthesis of Biochar@ZnFe2O4/BiOBr Z‐Scheme Heterojunction for Efficient Photocatalytic Ciprofloxacin Degradation Under Visible Light,” Applied Surface Science 493 (2019): 1361–1367, 10.1016/j.apsusc.2019.04.160. [DOI] [Google Scholar]
  • 235. Liang H., Yu M., Guo J., et al., “A Novel Vacancy‐Strengthened Z‐Scheme g‐C3N4/Bp/MoS2 Composite for Super‐Efficient Visible‐Light Photocatalytic Degradation of Ciprofloxacin,“ Separation and Purification Technology 272 (2021): 118891, 10.1016/j.seppur.2021.118891. [DOI] [Google Scholar]
  • 236. Zhan J., Liang L., Lu Y., et al., “Z‐Scheme Heterojunction Photocatalyst of LaFeO3@CoS for Tetracycline Hydrochloride Degradation by Persulfate Activation Using Visible Light,” Ceramics International 51 (2025): 1081–1095, 10.1016/j.ceramint.2024.11.090. [DOI] [Google Scholar]
  • 237. Liu F., Zhang Q., Chen C., Zhang Z., and Fang X., “Theoretical Design and Experimental Study a Novel Direct Z‐Scheme V2O5/C3N5 Heterojunction for Efficient Photocatalytic Hydrogen Production,” Solar Energy Materials and Solar Cells 257 (2023): 112385, 10.1016/j.solmat.2023.112385. [DOI] [Google Scholar]
  • 238. Yang Z., Xia X., Shao L., Wang L., and Liu Y., “Efficient Photocatalytic Degradation of Tetracycline Under Visible Light by Z‐Scheme Ag3PO4/Mixed‐Valence MIL‐88A(Fe) Heterojunctions: Mechanism Insight, Degradation Pathways and DFT Calculation,” Chemical Engineering Journal 410 (2021): 128454, 10.1016/j.cej.2021.128454. [DOI] [Google Scholar]
  • 239. Dong Y., Qiao Q., Wang R., Yang Y., Cai H., and Gao H., “Facile Fabrication of Zn0.6Cd0.4S/ZnO/g‐C3N4 Dual Z‐Scheme Heterostructures With Enhanced Performance Under Visible Light: An Experimental and Theoretical Study,” Scientific Reports 15 (2025): 18084, 10.1038/s41598-025-01198-6. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 240. Chen Z., Huang Z., Meng Y., Xie B., Ni Z., and Xia S., “Construction of Br‐Cu2O@NiFe‐LDHs Z‐Scheme Heterojunction and Photocatalytic Degradation of Catechol,” Journal of Environmental Chemical Engineering 12 (2024): 113686, 10.1016/j.jece.2024.113686. [DOI] [Google Scholar]
  • 241. Khan I., Khan S., Wu S., et al., “Synergistic Functionality of Dopants and Defects in Co‐Phthalocyanine/B‐CN Z‐Scheme Photocatalysts for Promoting Photocatalytic CO2 Reduction Reactions,” Small 19 (2023): 2208179, 10.1002/smll.202208179. [DOI] [PubMed] [Google Scholar]
  • 242. Liu X., Jiang Z., Cao X., et al., “Z‐Scheme Heterojunction g‐C3 N4/CQD/CdZnS With High Redox Capability for Enhancing Visible Light‐Driven Photocatalytic Depolymerization of Lignin Into Aromatic Monomers,” Green Chemistry 26 (2024): 1935–1948, 10.1039/D3GC03929C. [DOI] [Google Scholar]
  • 243. Chen J., Liu J., Qin M., Pan Q., and Li J., “Z‐Scheme Heterojunction on TS‐1 Zeolite Boosting Ultrafast Visible‐Light‐Driven Degradation of Cr(VI) and Tetracycline,” Inorganic Chemistry 64 (2025): 19068, 10.1021/acs.inorgchem.5c03337. [DOI] [PubMed] [Google Scholar]
  • 244. Wang Y., Sun X., Yi Z., et al., “Construction of a Z‐Scheme Ag2 MoO4/BiOBr Heterojunction for Photocatalytically Removing Organic Pollutants,” Dalton Transactions 51 (2022): 18652–18666, 10.1039/D2DT03345C. [DOI] [PubMed] [Google Scholar]
  • 245. Hua R., Huang Y., Xia Y., et al., “Enhanced Photocatalytic CO2 Reduction Over Z‐Scheme β‐Ga2O3/TiO2 Heterojunction Composite Catalyst: Synthesis, Performance, and Mechanism,” Journal of Environmental Chemical Engineering 12 (2024): 113135, 10.1016/j.jece.2024.113135. [DOI] [Google Scholar]
  • 246. Hua X., Chen H., Rong C., et al., “Visible‐Light‐Driven Photocatalytic Degradation of Tetracycline Hydrochloride by Z‐Scheme Ag3PO4/1T@2H‐MoS2 Heterojunction: Degradation Mechanism, Toxicity Assessment, and Potential Applications,” Journal of Hazardous Materials 448 (2023): 130951, 10.1016/j.jhazmat.2023.130951. [DOI] [PubMed] [Google Scholar]
  • 247. Sun X., Zhang J., Ma J., Xian T., Liu G., and Yang H., “Synthesis of Strongly Interactive FeWO4/BiOCl Heterostructures for Efficient Photoreduction of CO2 and Piezo‐Photodegradation of Bisphenol a,” Chemical Engineering Journal 496 (2024): 153961, 10.1016/j.cej.2024.153961. [DOI] [Google Scholar]
  • 248. Yan J., Wu H., Chen H., Zhang Y., Zhang F., and Liu S. F., “Fabrication of TiO2/C3N4 Heterostructure for Enhanced Photocatalytic Z‐Scheme Overall Water Splitting,” Applied Catalysis B: Environmental 191 (2016): 130–137, 10.1016/j.apcatb.2016.03.026. [DOI] [Google Scholar]
  • 249. Chen S., Qi Y., Hisatomi T., et al., “Efficient Visible‐Light‐Driven Z‐Scheme Overall Water Splitting Using a MgTa2O6−xNy/TaON Heterostructure Photocatalyst for H2 Evolution,” Angewandte Chemie 127 (2015): 8618–8621, 10.1002/ange.201502686. [DOI] [PubMed] [Google Scholar]
  • 250. Zhang D., Mao B., Li D., et al., “0D/2D Z‐Scheme Heterojunctions of Zn‐AgIn5S8 QDs/α‐Fe2O3 Nanosheets for Efficient Visible‐Light‐Driven Hydrogen Production,” Chemical Engineering Journal 417 (2021): 128275, 10.1016/j.cej.2020.128275. [DOI] [Google Scholar]
  • 251. Feng K., Xue W., Hu X., Fan J., and Liu E., “Z‐Scheme CdSe/ZnSe Heterojunction for Efficient Photocatalytic Hydrogen Evolution,” Colloids and Surfaces A: Physicochemical and Engineering Aspects 622 (2021): 126633, 10.1016/j.colsurfa.2021.126633. [DOI] [Google Scholar]
  • 252. Sun W., Ahmed T., Elbouazzaoui K., Edvinsson T., Zheng Y., and Zhu J., “Facile Fabrication of AgBr/HCCN Hybrids With Z‐Scheme Heterojunction for Efficient Photocatalytic Hydrogen Evolution,” Applied Surface Science 651 (2024): 159292, 10.1016/j.apsusc.2024.159292. [DOI] [Google Scholar]
  • 253. Wang X., Wang X., Yang H., et al., “Interfacial Engineering Improved Internal Electric Field Contributing to Direct Z‐Scheme‐Dominated Mechanism Over CdSe/SL‐ZnIn2S4/MoSe2 Heterojunction for Efficient Photocatalytic Hydrogen Evolution,” Chemical Engineering Journal 431 (2022): 134000, 10.1016/j.cej.2021.134000. [DOI] [Google Scholar]
  • 254. Xie K.‐X., Zhang Y., Qiang Z.‐B., et al., “A Direct Z‐Scheme GeS/GeSe Van der Waals Heterojunction as a Promising Photocatalyst With High Optical Absorption, Solar‐to‐Hydrogen Efficiency and Catalytic Activity for Overall Water Splitting: First‐Principles Prediction,” International Journal of Hydrogen Energy 51 (2024): 1381–1391, 10.1016/j.ijhydene.2023.07.288. [DOI] [Google Scholar]
  • 255. Luo Y.‐F., Zhang Y., Li J.‐H., Yang Y.‐S., Sun S.‐Z., and Duan L., “The SnC/WS2 vdW Heterojunction: A Prospective Direct Z‐Scheme Photocatalyst for Overall Water Decomposition With High STH Efficiency and Catalytic Activity,” Molecular Catalysis 557 (2024): 113983, 10.1016/j.mcat.2024.113983. [DOI] [Google Scholar]
  • 256. Zhang Y., Qiao H., Yan Z.‐H., Duan L., Ni L., and Fan J.‐B., “PtS2/g‐C3N4 Van der Waals Heterostructure: A Direct Z‐Scheme Photocatalyst With High Optical Absorption, Solar‐to‐Hydrogen Efficiency and Catalytic Activity,” International Journal of Hydrogen Energy 48 (2023): 14659–14669, 10.1016/j.ijhydene.2022.12.329. [DOI] [Google Scholar]
  • 257. Wang F., Yang C.‐L., Li X.‐H., Liu Y.‐L., and Zhao W.‐K., “Hydrogen Generation From Direct Z‐Scheme for Photocatalytic Overall Water Splitting With the SiSe/SnSe2 and SiSe/SnSSe Heterostructures,” Journal of Catalysis 432 (2024): 115429, 10.1016/j.jcat.2024.115429. [DOI] [Google Scholar]
  • 258. Yin Q.‐K., Yang C.‐L., Wang M.‐S., and Ma X.‐G., “Two‐Dimensional AuSe/SnSe Heterostructure for Solar Photocatalytic Hydrogen Evolution Reaction With Z‐Scheme,“ Solar Energy Materials and Solar Cells 247 (2022): 111940, 10.1016/j.solmat.2022.111940. [DOI] [Google Scholar]
  • 259. Yin Q.‐K., Yang C.‐L., Wang M.‐S., and Ma X.‐G., “Two‐Dimensional Heterostructures of AuSe/SnS for the Photocatalytic Hydrogen Evolution Reaction With a Z‐Scheme,” Journal of Materials Chemistry C 9 (2021): 12231–12238, 10.1039/D1TC02423J. [DOI] [Google Scholar]
  • 260. Wang G., Luo Z., Wei Q., et al., “Dual‐Metal Sites CuInS2/g‐C3N4 Z‐Scheme Heterojunction With Efficient Photocatalytic CO2 Reduction Selectivity,” Fuel Processing Technology 238 (2022): 107530, 10.1016/j.fuproc.2022.107530. [DOI] [Google Scholar]
  • 261. Bhosale R., Jain S., Vinod C. P., Kumar S., and Ogale S., “Direct Z‐Scheme g‐C3 N4/FeWO4 Nanocomposite for Enhanced and Selective Photocatalytic CO2 Reduction Under Visible Light,” ACS Applied Materials & Interfaces 11 (2019): 6174–6183, 10.1021/acsami.8b22434. [DOI] [PubMed] [Google Scholar]
  • 262. Jiang Y., Chen H., Li J., et al., “Z‐Scheme 2D/2D Heterojunction of CsPbBr3/Bi2 WO6 for Improved Photocatalytic CO2 Reduction,” Advanced Functional Materials 30 (2020): 2004293, 10.1002/adfm.202004293. [DOI] [Google Scholar]
  • 263. Wang Y., Huang H., Zhang Z., et al., “Lead‐Free Perovskite Cs2AgBiBr6@g‐C3N4 Z‐Scheme System for Improving CH4 Production in Photocatalytic CO2 Reduction,” Applied Catalysis B: Environmental 282 (2021): 119570, 10.1016/j.apcatb.2020.119570. [DOI] [Google Scholar]
  • 264. Murugesan P., Narayanan S., Manickam M., Murugesan P. K., and Subbiah R., “A Direct Z‐Scheme Plasmonic AgCl@g‐C3N4 Heterojunction Photocatalyst With Superior Visible Light CO2 Reduction in Aqueous Medium,” Applied Surface Science 450 (2018): 516–526, 10.1016/j.apsusc.2018.04.111. [DOI] [Google Scholar]
  • 265. Han Q., Li L., Gao W., et al., “Elegant Construction of ZnIn2 S4/BiVO4 Hierarchical Heterostructures as Direct Z‐Scheme Photocatalysts for Efficient CO2 Photoreduction,” ACS Applied Materials & Interfaces 13 (2021): 15092–15100, 10.1021/acsami.0c21266. [DOI] [PubMed] [Google Scholar]
  • 266. Huang Z., Zhang Q., Ma X., et al., “Construction of 0D/1D CdS/g‐C3N4 Z‐Scheme Heterojunction for Highly Selective Photocatalytic Benzylamine Oxidative Coupling,” Materials Today Chemistry 29 (2023): 101475, 10.1016/j.mtchem.2023.101475. [DOI] [Google Scholar]
  • 267. Zhang Y., Chen Z., Shi Z., et al., “A Direct Z‐Scheme BiOBr/TzDa COF Heterojunction Photocatalyst With Enhanced Performance on Visible‐Light Driven Removal of Organic Dye and Cr(VI),” Separation and Purification Technology 275 (2021): 119216, 10.1016/j.seppur.2021.119216. [DOI] [Google Scholar]
  • 268. Huang C., Li D., Cui X., et al., “Constructing 2D/2D g‐C3N4/BiOCl Z‐Scheme Heterojunction for Synthesis of Imines via Photocatalytic Coupling of Benzylamine,” Molecular Catalysis 559 (2024): 114051, 10.1016/j.mcat.2024.114051. [DOI] [Google Scholar]
  • 269. Shi H., Feng D., Li H., Yu D., and Chen X., “Hydrophilic Hydrogen‐Bonded Organic Frameworks/g‐C3N4 All‐Organic Z‐Scheme Heterojunction for Efficient Visible‐Light Photocatalytic Hydrogen Production and Dye Degradation,” Journal of Photochemistry and Photobiology A: Chemistry 435 (2023): 114292, 10.1016/j.jphotochem.2022.114292. [DOI] [Google Scholar]
  • 270. Zhong Y., Zhu H., Xie X., et al., “All‐Solid‐State Z‐Scheme CsPbBr3/Au/g‐C3 N4 Heterojunctions for Enhanced Photocatalytic C–H Oxidation,” Inorganic Chemistry 64 (2025): 2706–2715, 10.1021/acs.inorgchem.4c04472. [DOI] [PubMed] [Google Scholar]
  • 271. Shi K., Wang Z., Xiao Q., et al., “A Double Z‐Scheme Ternary Heterojunction FeNi2S4@MoS2/g‐C3N4: Interfacial Synergistic Mechanism of Charge Carrier Dynamics‐Accelerated Adsorption‐Photocatalysis for Efficient Pollutant Degradation and Hydrogen Evolution,” Journal of Environmental Management 398 (2026): 128528, 10.1016/j.jenvman.2025.128528. [DOI] [PubMed] [Google Scholar]
  • 272. Sharma P., Kumar A., Dhiman P., Lai C. W., Sharma G., and Wang T., “Harnessing MnCdS/AgIn5S8 Heterojunction With Promoted Interfacial Charge Transfer for Ultra‐High Efficiency Photocatalytic Degradation of Levofloxacin,“ Materials Science in Semiconductor Processing 199 (2025): 109825, 10.1016/j.mssp.2025.109825. [DOI] [Google Scholar]
  • 273. Zhang L., Guan X., Shi C., Ullah M. W., Wang Z., and Ma J., “Sustainable Cellulose Beads for Continuous‐Flow Photocatalytic Water Purification With Rapid Mineralization and Long‐Term Stability,” Journal of Environmental Chemical Engineering 14 (2026): 122308, 10.1016/j.jece.2026.122308. [DOI] [Google Scholar]
  • 274. Zhang Y., Ahmad I., Khalid M. S., et al., “Type II Heterojunction of Spinel Ferrite‐Anchored Titanate Nanotubes for Blue‐Light‐Driven Photocatalytic Oxidation,” Journal of Alloys and Compounds 1042 (2025): 184012, 10.1016/j.jallcom.2025.184012. [DOI] [Google Scholar]
  • 275. Hao Z., Sun X., Zhang L., et al., “Enhanced Recycling and Utilization of Industrial Waste Gas H2S Through Photoelectrochemical Methods With ZnFe2O4/ZnIn2S4 Heterojunction Containing NiCoP Co‐Catalyst,” Chemical Engineering Journal 517 (2025): 164553, 10.1016/j.cej.2025.164553. [DOI] [Google Scholar]
  • 276. Wang W., Wang K., Yang G., and Shu Z., “Saline‐Mediated Dynamic Cation Reconstruction in NiS/Poly(heptazine Imide) Heterostructures for Durable Solar Hydrogen Evolution,” Carbon 250 (2026): 121297, 10.1016/j.carbon.2026.121297. [DOI] [Google Scholar]
  • 277. Wang J., Tang L., Zeng G., et al., “Atomic Scale g‐C3N4/Bi2WO6 2D/2D Heterojunction With Enhanced Photocatalytic Degradation of Ibuprofen Under Visible Light Irradiation,” Applied Catalysis B: Environmental 209 (2017): 285–294, 10.1016/j.apcatb.2017.03.019. [DOI] [Google Scholar]
  • 278. Lam S.‐M., Choong M.‐K., Sin J.‐C., et al., “Construction of Delaminated Ti3C2 MXene/NiFe2O4/V2O5 Ternary Composites for Expeditious Pollutant Degradation and Bactericidal Property,” Journal of Environmental Chemical Engineering 10 (2022): 108284, 10.1016/j.jece.2022.108284. [DOI] [Google Scholar]
  • 279. Liu S., Zhang Y., Du J., et al., “Facilitating Carrier Kinetics in Dual S‐Scheme Heterojunctions Through Interface Regulating Strategy for H2O2 Generation and Nizatidine Degradation,” Chemical Engineering Journal 523 (2025): 168949, 10.1016/j.cej.2025.168949. [DOI] [Google Scholar]
  • 280. Feng B., Wu L., Jv A., et al., “Accurate Construction of Cd/CdS/g‐C3N4 Heterojunction Interface for Efficient Photocatalytic Tetracycline Degradation and Cr6 + Reduction,” Colloids and Surfaces A: Physicochemical and Engineering Aspects 701 (2024): 134981, 10.1016/j.colsurfa.2024.134981. [DOI] [Google Scholar]
  • 281. Dang J., Guo J., Wang L., et al., “Construction of Z‐Scheme Fe3O4/BiOCl/BiOI Heterojunction With Superior Recyclability for Improved Photocatalytic Activity Towards Tetracycline Degradation,” Journal of Alloys and Compounds 893 (2022): 162251, 10.1016/j.jallcom.2021.162251. [DOI] [Google Scholar]
  • 282. Ge C., Wang B., Yang H., et al., “Direct Z‐Scheme GaSe/ZrS2 Heterojunction for Overall Water Splitting,” International Journal of Hydrogen Energy 48 (2023): 13460–13469, 10.1016/j.ijhydene.2022.12.247. [DOI] [Google Scholar]
  • 283. Wang B., Wang X., Yuan H., Zhou T., Chang J., and Chen H., “Direct Z‐Scheme Photocatalytic Overall Water Splitting on Two Dimensional MoSe2/SnS2 Heterojunction,” International Journal of Hydrogen Energy 45 (2020): 2785–2793, 10.1016/j.ijhydene.2019.11.178. [DOI] [Google Scholar]
  • 284. Li H., Xu L., Huang X., et al., “Two‐Dimensional C3N/WS2 vdW Heterojunction for Direct Z‐Scheme Photocatalytic Overall Water Splitting,” International Journal of Hydrogen Energy 48 (2023): 2186–2199, 10.1016/j.ijhydene.2022.10.102. [DOI] [Google Scholar]
  • 285. Xu M., Lu M., Qin G., et al., “Piezo‐Photocatalytic Synergy in BiFeO3 @COF Z‐Scheme Heterostructures for High‐Efficiency Overall Water Splitting,” Angewandte Chemie 134 (2022): e202210700, 10.1002/ange.202210700. [DOI] [PubMed] [Google Scholar]
  • 286. Ge W., Song J., Deng S., Liu K., and Yang P., “Construction of Z‐Scheme CoFe2O4@ZnIn2S4 p‐n Heterojunction for Enhanced Photocatalytic Hydrogen Production,” Separation and Purification Technology 328 (2024): 125059, 10.1016/j.seppur.2023.125059. [DOI] [Google Scholar]
  • 287. Ge W., Liu K., Deng S., Yang P., and Shen L., “Z‐Scheme g‐C3N4/ZnO Heterojunction Decorated by Au Nanoparticles for Enhanced Photocatalytic Hydrogen Production,” Applied Surface Science 607 (2023): 155036, 10.1016/j.apsusc.2022.155036. [DOI] [Google Scholar]
  • 288. Kim D. and Yong K., “Boron Doping Induced Charge Transfer Switching of a C3N4/ZnO Photocatalyst From Z‐Scheme to Type II to Enhance Photocatalytic Hydrogen Production,” Applied Catalysis B: Environmental 282 (2021): 119538, 10.1016/j.apcatb.2020.119538. [DOI] [Google Scholar]
  • 289. Wang H., Liu Q., Ji T., et al., “Preparation of Mn0.8Cd0.2S/NiCo2S4 Z‐Scheme Heterojunction Composite for Enhanced Photocatalytic Hydrogen Production,” Surfaces and Interfaces 45 (2024): 103900, 10.1016/j.surfin.2024.103900. [DOI] [Google Scholar]
  • 290. Dong H., Hong S., Zhang P., et al., “Metal‐Free Z‐Scheme 2D/2D VdW Heterojunction for High‐Efficiency and Durable Photocatalytic H2 Production,” Chemical Engineering Journal 395 (2020): 125150, 10.1016/j.cej.2020.125150. [DOI] [Google Scholar]
  • 291. Yang G., Chen D., Ding H., et al., “Well‐Designed 3D ZnIn2S4 Nanosheets/TiO2 Nanobelts as Direct Z‐Scheme Photocatalysts for CO2 Photoreduction Into Renewable Hydrocarbon Fuel With High Efficiency,” Applied Catalysis B: Environmental 219 (2017): 611–618, 10.1016/j.apcatb.2017.08.016. [DOI] [Google Scholar]
  • 292. Yang W., Zhou F., Sun N., et al., “Constructing a 3D Bi2WO6/ZnIn2S4 Direct Z‐Scheme Heterostructure for Improved Photocatalytic CO2 Reduction Performance,” Journal of Colloid and Interface Science 662 (2024): 695–706, 10.1016/j.jcis.2024.02.119. [DOI] [PubMed] [Google Scholar]
  • 293. He Y., Zhang L., Teng B., and Fan M., “New Application of Z‐Scheme Ag3 PO4/g‐C3 N4 Composite in Converting CO2 to Fuel,” Environmental Science & Technology 49 (2015): 649–656, 10.1021/es5046309. [DOI] [PubMed] [Google Scholar]
  • 294. Tahir M., “Well‐Designed ZnFe2O4/Ag/TiO2 Nanorods Heterojunction With Ag as Electron Mediator for Photocatalytic CO2 Reduction to Fuels Under UV/Visible Light,” Journal of CO2 Utilization 37 (2020): 134–146, 10.1016/j.jcou.2019.12.004. [DOI] [Google Scholar]
  • 295. Fan Y., Qi S., Li W., and Zhao M., “Direct Z‐Scheme Photocatalytic CO2 Conversion to Solar Fuels in a Two‐Dimensional C2N/Aza‐CMP Heterostructure,” Applied Surface Science 541 (2021): 148630, 10.1016/j.apsusc.2020.148630. [DOI] [Google Scholar]
  • 296. Hong L., Guo R., Yuan Y., et al., “Urchinlike W18 O49/g‐C3 N4 Z‐Scheme Heterojunction for Highly Efficient Photocatalytic Reduction of CO2 Under Full Spectrum Light,” Energy & Fuels 35 (2021): 11468–11478, 10.1021/acs.energyfuels.1c01241. [DOI] [Google Scholar]
  • 297. Hao J., Qi B., Wei J., Li D., and Zeng F., “A Z‐Scheme Cu2O/WO3 Heterojunction for Production of Renewable Hydrocarbon Fuel From Carbon Dioxide,” Fuel 287 (2021): 119439, 10.1016/j.fuel.2020.119439. [DOI] [Google Scholar]
  • 298. Di T., Zhu B., Cheng B., Yu J., and Xu J., “A Direct Z‐Scheme g‐C3N4/SnS2 Photocatalyst With Superior Visible‐Light CO2 Reduction Performance,” Journal of Catalysis 352 (2017): 532–541, 10.1016/j.jcat.2017.06.006. [DOI] [Google Scholar]
  • 299. Lu M., Li Q., Zhang C., et al., “Remarkable Photocatalytic Activity Enhancement of CO2 Conversion Over 2D/2D g‐C3N4/BiVO4 Z‐Scheme Heterojunction Promoted by Efficient Interfacial Charge Transfer,” Carbon 160 (2020): 342–352, 10.1016/j.carbon.2020.01.038. [DOI] [Google Scholar]
  • 300. Wang J., Yang L., and Zhang L., “Constructed 3D Hierarchical Micro‐Flowers CoWO4@Bi2WO6 Z‐Scheme Heterojunction Catalyzer: Two‐Channel Photocatalytic H2O2 Production and Antibiotics Degradation,” Chemical Engineering Journal 420 (2021): 127639, 10.1016/j.cej.2020.127639. [DOI] [Google Scholar]
  • 301. Yang Q., Li R., Wei S., and Yang R., “Schottky Functionalized Z‐Scheme Heterojunction Photocatalyst Ti2C3/g‐C3N4/BiOCl:Efficient Photocatalytic H2O2 Production via Two‐Channel Pathway,” Applied Surface Science 572 (2022): 151525, 10.1016/j.apsusc.2021.151525. [DOI] [Google Scholar]
  • 302. Gao J., Yang S., Wei P., et al., “Enhanced Photocatalytic H2O2 Production Through Synergistic Double‐Vacancy Engineering in Z‐Scheme TiO2 ‐x/g‐C3N4 ‐x Heterojunction,” Separation and Purification Technology 354 (2025): 128685, 10.1016/j.seppur.2024.128685. [DOI] [Google Scholar]
  • 303. Dai D., Qiu J., Xia G., et al., “Metal‐Organic Framework Templated Z‐Scheme ZnIn2 S4/Bi2 S3 Hierarchical Heterojunction for Photocatalytic H2 O2 Production From Wastewater,” Small 20 (2024): 2403268, 10.1002/smll.202403268. [DOI] [PubMed] [Google Scholar]
  • 304. Xu Y., Liao J., Zhang L., Sun Z., and Ge C., “Dual Sulfur Defect Engineering of Z‐Scheme Heterojunction on Ag‐CdS1 ‐x@ZnIn2S4 ‐x Hollow Core‐Shell for Ultra‐Efficient Selective Photocatalytic H2O2 Production,” Journal of Colloid and Interface Science 647 (2023): 446–455, 10.1016/j.jcis.2023.05.140. [DOI] [PubMed] [Google Scholar]
  • 305. Geng X., Wang L., Zhang L., Wang H., Peng Y., and Bian Z., “H2O2 Production and In Situ Sterilization Over a ZnO/g‐C3N4 Heterojunction Photocatalyst,” Chemical Engineering Journal 420 (2021): 129722, 10.1016/j.cej.2021.129722. [DOI] [Google Scholar]
  • 306. Yang Y., Zeng Z., Zhang C., et al., “Construction of Iodine Vacancy‐Rich BiOI/Ag@AgI Z‐Scheme Heterojunction Photocatalysts for Visible‐Light‐Driven Tetracycline Degradation: Transformation Pathways and Mechanism Insight,” Chemical Engineering Journal 349 (2018): 808–821, 10.1016/j.cej.2018.05.093. [DOI] [Google Scholar]
  • 307. Lin Z., Shao J., Zhu J., and Wang D., “Bi‐ZFO/BMO‐Vo Z‐Scheme Heterojunction Photocatalysis‐PMS Bidirectionally Enhanced Coupling System for Environmental Remediation,” Journal of Materials Science & Technology 208 (2025): 164–175, 10.1016/j.jmst.2024.02.086. [DOI] [Google Scholar]
  • 308. Xu D., Cheng B., Cao S., and Yu J., “Enhanced Photocatalytic Activity and Stability of Z‐Scheme Ag2CrO4‐GO Composite Photocatalysts for Organic Pollutant Degradation,” Applied Catalysis B: Environmental 164 (2015): 380–388, 10.1016/j.apcatb.2014.09.051. [DOI] [Google Scholar]
  • 309. Wang H., Yu J., Zhan X., Chen L., Sun Y., and Shi H., “Direct 2D/2D Z‐Scheme SnNb2O6/ZnO Hybrid Photocatalyst With Enhanced Interfacial Charge Separation and High Efficiency for Pollutants Degradation,” Applied Surface Science 528 (2020): 146938, 10.1016/j.apsusc.2020.146938. [DOI] [Google Scholar]
  • 310. Yu B., Fang W., Bai H., Li C., Shen D., and Wang L., “Construction of Curly‐Like CN@CdS Z‐Scheme Heterojunction to Boost Visible‐Light‐Driven H2O2 Evolution,” Catalysts 15 (2025): 543, 10.3390/catal15060543. [DOI] [Google Scholar]
  • 311. Zhang J., Chen X., Chen Q., et al., “Insights Into Photocatalytic Degradation Pathways and Mechanism of Tetracycline by an Efficient Z‐Scheme NiFe‐LDH/CTF‐1 Heterojunction,” Nanomaterials 12 (2022): 4111, 10.3390/nano12234111. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 312. Luo Q., Sun C., Zhao J., Cai Q., and Yao S., “Highly Efficient SnIn4S8@ZnO Z‐Scheme Heterojunction Photocatalyst for Methylene Blue Photodegradation,” Materials 16 (2023): 6380, 10.3390/ma16196380. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 313. Ma T., Li Z., Wang G., Zhang J., and Wang Z., “Efficient Visible‐Light Driven Photocatalytic Hydrogen Production by Z‐Scheme ZnWO4/Mn0.5Cd0.5S Nanocomposite Without Precious Metal Cocatalyst,” Catalysts 12 (2022): 1527, 10.3390/catal12121527. [DOI] [Google Scholar]
  • 314. Xiao Y., Tao X., Qiu G., Dai Z., Gao P., and Li B., “Optimal Synthesis of a Direct Z‐Scheme Photocatalyst With Ultrathin W18O49 Nanowires on g‐C3N4 Nanosheets for Solar‐Driven Oxidation Reactions,” Journal of Colloid and Interface Science 550 (2019): 99–109, 10.1016/j.jcis.2019.04.081. [DOI] [PubMed] [Google Scholar]
  • 315. Li X., Cheong W.‐C., Xu X., et al., “Directed Charge Transfer of Zn‐O Bridge of Atomistic Tandem Dual Z‐Scheme Heterojunction for Photocatalytic CO2 Reduction,” Materials Science and Engineering: R: Reports 166 (2025): 101039, 10.1016/j.mser.2025.101039. [DOI] [Google Scholar]
  • 316. Jiang C., Wang H., Wang Y., and Ji H., “All Solid‐State Z Scheme CeO2/ZnIn2S4 Hybrid for the Photocatalytic Selective Oxidation of Aromatic Alcohols Coupled With Hydrogen Evolution,” Applied Catalysis B: Environmental 277 (2020): 119235, 10.1016/j.apcatb.2020.119235. [DOI] [Google Scholar]
  • 317. Pedanekar R. S., Mohite S. V., Narewadikar N. A., et al., “Photoelectrocatalytic Degradation of Organic Contaminants by Spray Coated Z‐Scheme TiO2/Bi2WO6 Heterostructure Electrode Under Solar Light,” Materials Research Bulletin 182 (2025): 113127, 10.1016/j.materresbull.2024.113127. [DOI] [Google Scholar]
  • 318. Chandra M. and Pradhan D., “Engineered Sulfur Vacancies in Z‐Scheme ZnS/TiO2 Heterostructure for Dual Photocatalytic Functionality,” ChemCatChem 17 (2025): e202500395, 10.1002/cctc.202500395. [DOI] [Google Scholar]
  • 319. Sompalli N. K., Li Y., Li J., and Zhao B., “Visible‐Light Driven Z‐Scheme CoTiO3/Cu‐BTC MOF Heterojunction Photocatalyst for Efficient Organic and Inorganic Pollutant Detoxification: Mechanistic Insights and Toxicity Evaluation,” Journal of Environmental Chemical Engineering 13 (2025): 118182, 10.1016/j.jece.2025.118182. [DOI] [Google Scholar]
  • 320. Muhammad W., Khan A., Hussain S., et al., “Enhanced Light Absorption and Charge Carrier's Separation in g‐C3 N4 ‐Based Double Z‐Scheme Heterostructure Photocatalyst for Efficient Degradation of Navy‐Blue Dye,” Green Chemistry Letters and Reviews 17 (2024): 2381591, 10.1080/17518253.2024.2381591. [DOI] [Google Scholar]
  • 321. Zargar S. A., Gharivi M., Bagheri O., Malek Khachatourian A., and Hashemi A., “Green Synthesis of Z‐Scheme N‐Doped g‐C3N4/Nd‐Doped ZnO Heterostructure by Pomegranate Waste Peel With Enhanced Photocatalytic Performance for Organic Pollutants Removal and Antibacterial Activity,” FlatChem 48 (2024): 100736, 10.1016/j.flatc.2024.100736. [DOI] [Google Scholar]
  • 322. Yang G., Wang L., Zheng S., et al., “Novel Dual Z‐Scheme Ag‐Bridged AgI/FeVO4‐C3N4 Plasmonic Heterojunction: A Study on the Performance and Mechanism of Photocatalytic Reduction of Cr(VI),” Journal of Environmental Chemical Engineering 11 (2023): 110071, 10.1016/j.jece.2023.110071. [DOI] [Google Scholar]
  • 323. Xu B., An Z., Li M., Zhang B., and Guo L.‐H., “Photocatalytic Degradation of Tetrabromobisphenol a by Z‐Scheme WO3/ZnIn2S4 Heterojunction: Efficiency, Mechanism and Toxicity Evaluation,” Journal of Environmental Chemical Engineering 11 (2023): 111522, 10.1016/j.jece.2023.111522. [DOI] [Google Scholar]
  • 324. Chowdhury A., Balu S., and Yang T. C.‐K., “Construction of α‐Fe2O3‐NPs@AgVO3‐NRs Z‐Scheme Heterojunction: An Efficient Photo(electro)catalyst for Cr(VI) Reduction and Oxygen Evolution Reactions Under Visible‐Light,” Journal of Environmental Chemical Engineering 11 (2023): 109769, 10.1016/j.jece.2023.109769. [DOI] [Google Scholar]
  • 325. Qin X., Dang J., Li X., et al., “Design and Construction of a Novel Immobilized Z‐Scheme Heterojunction 430‐SSF|NiFe2O4/NiO@Er3+: YAlO3 Photocatalyst Thin Film for Efficient Congo Red Degradation With Simultaneous Hydrogen Evolution,” International Journal of Hydrogen Energy 131 (2025): 191–207, 10.1016/j.ijhydene.2025.04.273. [DOI] [Google Scholar]
  • 326. Al‐Farraji A., Ammar S. H., and Alabdly H. A., “LaCoO3/La‐Doped g‐C3N4 Heterojunctions for Synergistically Promoted Photocatalytic Degradation of Enrofloxacin in an Immobilized Photocatalyst‐ Polymer Film‐Based Airlift Photocatalytic Reactor,“ Chemical Engineering Research and Design 221 (2025): 487–496, 10.1016/j.cherd.2025.08.032. [DOI] [Google Scholar]
  • 327. Li Z., Liu B., Zhang X., et al., “In Situ Preparation of a Novel Z‐Scheme BiOBr/BiVO4 Composite Film With Enhanced Photocatalytic CO2 Reduction Performance,” Sustainable Energy Fuels 8 (2024): 262–271, 10.1039/D3SE01001E. [DOI] [Google Scholar]
  • 328. Li J., Zhao Z., Li Z., et al., “Construction of Immobilized Films Photocatalysts With CdS Clusters Decorated by Metal Cd and BiOCl for Photocatalytic Degradation of Tetracycline Antibiotics,” Chinese Chemical Letters 33 (2022): 3705–3708, 10.1016/j.cclet.2021.10.080. [DOI] [Google Scholar]
  • 329. Chi S., Tian Y., Tu Y., et al., “Design and Construction of a Novel Immobilized Z‐Scheme‐Type II‐Heterojunction ZnO/ZnCo2O4–Co3O4|Co Photocatalyst Composite Film for Efficient Norfloxacin Degradation With Simultaneous Hydrogen Evolution,“ Materials Science in Semiconductor Processing 171 (2024): 108041, 10.1016/j.mssp.2023.108041. [DOI] [Google Scholar]
  • 330. Wan L., Li C., Long G., Zhang M., Chen B., and Wang N., “High Efficient pH‐Universal Photo‐Fenton Degradation of Antibiotics by Amorphous FeSiB Microspheres Decorated TiO2 Nanowire Hybrid Film,” Colloids and Surfaces A: Physicochemical and Engineering Aspects 645 (2022): 128924, 10.1016/j.colsurfa.2022.128924. [DOI] [Google Scholar]
  • 331. Ali S., Lee J., Kim H., et al., “Sustained, Photocatalytic CO2 Reduction to CH4 in a Continuous Flow Reactor by Earth‐Abundant Materials: Reduced Titania‐Cu2O Z‐Scheme Heterostructures,” Applied Catalysis B: Environmental 279 (2020): 119344, 10.1016/j.apcatb.2020.119344. [DOI] [Google Scholar]
  • 332. Askari N., Beheshti M., Mowla D., and Farhadian M., “Fabrication of CuWO4/Bi2S3/ZIF67 MOF: A Novel Double Z‐Scheme Ternary Heterostructure for Boosting Visible‐Light Photodegradation of Antibiotics,” Chemosphere 251 (2020): 126453, 10.1016/j.chemosphere.2020.126453. [DOI] [PubMed] [Google Scholar]
  • 333. Ullah S., Fayeza, Khan A. A., Jan A., Aain S. Q., Neto E. P. F., Serge‐Correales Y. E., Parveen R., Wender H., Rodrigues‐Filho U. P., and Ribeiro S. J. L., “Enhanced Photoactivity of BiVO4/Ag/Ag2O Z‐Scheme Photocatalyst for Efficient Environmental Remediation Under Natural Sunlight and Low‐Cost LED Illumination,” Colloids and Surfaces A: Physicochemical and Engineering Aspects 600 (2020): 124946, 10.1016/j.colsurfa.2020.124946. [DOI] [Google Scholar]
  • 334. Baghdadi Y., Temerov F., Cui J., et al., “Cs3 Bi2 Br9/g‐C3 N4 Direct Z‐Scheme Heterojunction for Enhanced Photocatalytic Reduction of CO2 to CO,” Chemistry of Materials 35 (2023): 8607–8620, 10.1021/acs.chemmater.3c01635. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 335. Tahir M., “V2AlC MAX‐Mediated 2D/0D ZnCo2O4 NS/TiO2 Z‐Scheme Heterojunctions With Enhanced Photocatalytic CO2 Bireforming via Synergistic Charge Transfer in a Monolith and Flow Reactor,” Fuel 404 (2026): 136206, 10.1016/j.fuel.2025.136206. [DOI] [Google Scholar]
  • 336. Dang H. V., Wang Y. H., and Wu J. C. S., “Z‐Scheme Photocatalyst Pt/GaP‐TiO2‐SiO2: Rh for the Separated H2 Evolution From Photocatalytic Seawater Splitting,” Applied Catalysis B: Environmental 296 (2021): 120339, 10.1016/j.apcatb.2021.120339. [DOI] [Google Scholar]
  • 337. Zixin Z. and Boris K., “Hierarchical Z‐Scheme Bi Metal‐Doped TiO2 on Intersectional CuO Nanosheets: Exploring Impact of Bi on Structural Justification and Synergy Charge Migration,” Journal of Water Process Engineering 74 (2025): 107720, 10.1016/j.jwpe.2025.107720. [DOI] [Google Scholar]
  • 338. Sanei A., Dashtian K., Yousefi Seyf J., Seidi F., and Kolvari E., “Biomass Derived Reduced‐Graphene‐Oxide Supported α‐Fe2O3/ZnO S‐Scheme Heterostructure: Robust Photocatalytic Wastewater Remediation,” Journal of Environmental Management 332 (2023): 117377, 10.1016/j.jenvman.2023.117377. [DOI] [PubMed] [Google Scholar]
  • 339. Yoon J.‐S., Lee J.‐W., and Sung Y.‐M., “Enhanced Photoelectrochemical Properties of Z‐Scheme ZnO/p‐n Cu2O PV‐PEC Cells,” Journal of Alloys and Compounds 771 (2019): 869–876, 10.1016/j.jallcom.2018.09.021. [DOI] [Google Scholar]
  • 340. Li L., Shi H., Yu H., et al., “Ultrathin MoSe2 Nanosheet Anchored CdS‐ZnO Functional Paper Chip as a Highly Efficient Tandem Z‐Scheme Heterojunction Photoanode for Scalable Photoelectrochemical Water Splitting,” Applied Catalysis B: Environmental 292 (2021): 120184, 10.1016/j.apcatb.2021.120184. [DOI] [Google Scholar]
  • 341. Ji Y., Zhao S., Wei J., et al., “Interfacial Engineering of Ternary Z‐Scheme Bi/Bi2WO6/g‐C3N4 Heterojunction for Self‐Powered Photoelectrochemical Aptasensing of Chlorpyrifos,” Applied Surface Science 714 (2025): 164430, 10.1016/j.apsusc.2025.164430. [DOI] [Google Scholar]
  • 342. Cheng J., Chen C., Zeng X., Chen M., Shen Y., and Xie Q., “Enhanced Photoelectrochemistry Water Splitting Based on the Bi‐Piezoelectric Z‐Scheme Pn Heterojunction of an n‐CdTe/p‐ZnO Nanorods Array,” Journal of Alloys and Compounds 976 (2024): 173114, 10.1016/j.jallcom.2023.173114. [DOI] [Google Scholar]
  • 343. Chen G., Wang H., Wei X., et al., “Efficient Z‐Scheme Heterostructure Based on TiO2/Ti3C2T/Cu2O to Boost Photoelectrochemical Response for Ultrasensitive Biosensing,” Sensors and Actuators B: Chemical 312 (2020): 127951, 10.1016/j.snb.2020.127951. [DOI] [Google Scholar]
  • 344. Wang Y., Wu J., Yan Y., et al., “Black Phosphorus‐Based Semiconductor Multi‐Heterojunction TiO2‐BiVO4‐BP/RP Film With an In Situ Junction and Z‐Scheme System for Enhanced Photoelectrocatalytic Activity,” Chemical Engineering Journal 403 (2021): 126313, 10.1016/j.cej.2020.126313. [DOI] [Google Scholar]
  • 345. Yadav H., Verma S., Choubey A., and Yadav A., “Efficient Photo‐Electrochemical Remediation of Antibiotic‐Contaminated Wastewater via Harnessing Z‐Scheme Heterojunction‐Based WSe2/BiVO4 Photoanode,“ Process Safety and Environmental Protection 198 (2025): 107133, 10.1016/j.psep.2025.107133. [DOI] [Google Scholar]
  • 346. Niu X., Zhao Y., Wang F., Wu J., Qu F., and Tan W., “Ultrasensitive Photoelectrochemical Biosensor Based on Novel Z‐Scheme Heterojunctions of Zn‐Defective CdS/ZnS for MicroRNA Assay,” Analytical Chemistry 93 (2021): 17134–17140, 10.1021/acs.analchem.1c04820. [DOI] [PubMed] [Google Scholar]
  • 347. Zhang B., Wang H., Xi J., Zhao F., and Zeng B., “A Novel Z‐Scheme ZnIn2S4/WO3 Photocatalyst Based Photoelectrochemical Immunosensor for the Sensitive Detection of Prostate Specific Antigen,” Sensors and Actuators B: Chemical 298 (2019): 126835, 10.1016/j.snb.2019.126835. [DOI] [Google Scholar]
  • 348. Zhu J.‐H., Feng Y.‐G., Wang A.‐J., Mei L.‐P., Luo X., and Feng J.‐J., “A Signal‐on Photoelectrochemical Aptasensor for Chloramphenicol Assay Based on 3D Self‐Supporting AgI/Ag/BiOI Z‐Scheme Heterojunction Arrays,” Biosensors and Bioelectronics 181 (2021): 113158, 10.1016/j.bios.2021.113158. [DOI] [PubMed] [Google Scholar]
  • 349. Balu S., Venkatesvaran H., Lan K.‐W., and Yang T. C.‐K., “Synthesis of Highly Efficient (0D/1D) Z‐Scheme CdS‐NPs@ZnO‐NRs Visible‐Light‐Driven Photo(electro)catalyst for PEC Oxygen Evolution Reaction and Removal of Tetracycline,” Catalysts 12 (2022): 1601, 10.3390/catal12121601. [DOI] [Google Scholar]
  • 350. Xu X., Deng F., Shao P., et al., “Internal Electric Field Driving Separation and Migration of Charge Carriers via Z‐Scheme Path in AgIn5S8/ZnO Heterojunction for Efficient Decontamination of Pharmaceutical Pollutants,” Chemical Engineering Journal 428 (2022): 132096, 10.1016/j.cej.2021.132096. [DOI] [Google Scholar]
  • 351. Ju L., Liu C., Shi L., and Sun L., “The High‐Speed Channel Made of Metal for Interfacial Charge Transfer in Z‐Scheme g–C3 N4/MoS2 Water‐Splitting Photocatalyst,” Materials Research Express 6 (2019): 115545, 10.1088/2053-1591/ab509c. [DOI] [Google Scholar]
  • 352. Jiang J., Mu Z., Zhao P., Wang H., and Lin Y., “Photogenerated Charge Behavior of BiOI/g‐C3N4 Photocatalyst in Photoreduction of Cr (VI): A Novel Understanding for High‐Performance,” Materials Chemistry and Physics 252 (2020): 123194, 10.1016/j.matchemphys.2020.123194. [DOI] [Google Scholar]
  • 353. Zhang X., Liu Y., Chen L., et al., “Interface Modulation of FePc/Porous Ti(HPO4)2 Z‐Scheme Heterojunctions With Ultrafine Ag for Efficiently Photocatalytic CO Oxidation,” Small Structures 3 (2022): 2200011, 10.1002/sstr.202200011. [DOI] [Google Scholar]
  • 354. Ni M., Zhu Y., Guo C., et al., “Efficient Visible‐Light‐Driven CO2 Methanation With Self‐Regenerated Oxygen Vacancies in Co3 O4/NiCo2 O4 Hetero‐Nanocages: Vacancy‐Mediated Selective Photocatalysis,” ACS Catalysis 13 (2023): 2502–2512, 10.1021/acscatal.2c05577. [DOI] [Google Scholar]
  • 355. Jin W., Zhong X., Li X., et al., “2D/3D BiVO4 @ZnIn2 S4 Hierarchical Heterojunction for Enhanced One‐Electron Oxygen Reduction Kinetics of H2 O2 Artificial Photosynthesis,” Inorganic Chemistry 64 (2025): 2777–2786, 10.1021/acs.inorgchem.4c04741. [DOI] [PubMed] [Google Scholar]
  • 356. Zhai H., Liu H., Zhang Y., et al., “Flexible Construction of Heteroatom‐Free g‐C3N4/g‐C3N4 Homojunction With Switching Charge Dynamics Toward Efficient Photo‐Piezocatalytic Performance,” Applied Catalysis B: Environment and Energy 349 (2024): 123909, 10.1016/j.apcatb.2024.123909. [DOI] [Google Scholar]
  • 357. Xu X., Dong S., Lv J., Huang G., Chen Q., and Bi J., “Interfacial C‐N‐S Bridged SnS2/COF S‐Scheme Heterojunction With Upgraded Near‐Infrared Photo‐Activity for H2O2 Synthesis,” Applied Surface Science 689 (2025): 162489, 10.1016/j.apsusc.2025.162489. [DOI] [Google Scholar]
  • 358. Liu F., Li P., Du Z., et al., “Polarization‐Induced Internal Electric Field‐Dominated S‐Scheme KNbO3 –CuO Heterojunction for Photoreduction of CO2 With High CH4 Selectivity,” ACS Applied Materials & Interfaces 16 (2024): 69418–69429, 10.1021/acsami.4c16163. [DOI] [PubMed] [Google Scholar]
  • 359. Xu Y., Tang X., Xiao Y., et al., “Persulfate Promoted Visible Photocatalytic Elimination of Bisphenol a by g‐C3N4–CeO2 S‐Scheme Heterojunction: The Dominant Role of Photo‐Induced Holes,” Chemosphere 331 (2023): 138765, 10.1016/j.chemosphere.2023.138765. [DOI] [PubMed] [Google Scholar]
  • 360. Liu J., Wu M., Ye H., Xie Y., Ma Y., and Liu L., “Strong Interaction Between Sulfur Sites and Oxygen Vacancies in Z‐Scheme ZnIn2S4/TiO2 ‐x Heterojunction for Improved Photocatalytic Hydrogen Yield and Stability,” Chemical Engineering Journal 455 (2023): 140722, 10.1016/j.cej.2022.140722. [DOI] [Google Scholar]
  • 361. Fang J., Wang M., Yang X., Sun Q., and Yu L., “Design and Preparation of ZnIn2S4/g‐C3N4 Z‐Scheme Heterojunction for Enhanced Photocatalytic CO2 Reduction,” Catalysts 15 (2025): 95, 10.3390/catal15010095. [DOI] [Google Scholar]
  • 362. Chinnasamy C., Perumal N., Selvaraj S., Pamula B. B., and Perumalsamy R., “Developing Environmental Purity: Fabricated Direct Z‐Scheme Charge Transfer in CuMn2O4/GO Heterostructure for Superior Photocatalytic Organic Pollutant Degradation and Electrochemical HER Evolution,” Journal of Water Process Engineering 65 (2024): 105701, 10.1016/j.jwpe.2024.105701. [DOI] [Google Scholar]
  • 363. Wang Y., Xing Z., Zhao H., et al., “MoS2@In2S3/Bi2S3 Core‐Shell Dual Z‐Scheme Tandem Heterojunctions With Broad‐Spectrum Response and Enhanced Photothermal‐Photocatalytic Performance,” Chemical Engineering Journal 431 (2022): 133355, 10.1016/j.cej.2021.133355. [DOI] [Google Scholar]
  • 364. Arshad M., Chen L., Navya B. S., Chen C.‐W., and Dong C.‐D., “Construction Z‐Scheme ZnS/Fe2O3 Nanohybrid With Enhanced Photocatalytic Antibacterial and Degradation Activity: Pathways and Mechanism Insight,” Journal of Water Process Engineering 71 (2025): 107208, 10.1016/j.jwpe.2025.107208. [DOI] [Google Scholar]
  • 365. Xie Y., Wu H., Luo J., et al., “Phase Transition Guided V2O5/β‐Bi2O3 Z‐Scheme Heterojunctions for Efficient Photocatalytic Hg0 Oxidation,“ Separation and Purification Technology 330 (2024): 125318, 10.1016/j.seppur.2023.125318. [DOI] [Google Scholar]
  • 366. Pradhan S. K., Bariki R., Nayak S. K., Panda S., Das N. K., and Mishra B. G., “Facile Synthesis of Oxygen‐Deficient CeVO4/Bi/Bi2 MoO6 Ternary Heterostructures With Bi‐Mediated Switching From Type‐I to Z‐Scheme Mechanism for O2 and N2 Photoreductions,” Industrial & Engineering Chemistry Research 63 (2024): 17193–17206, 10.1021/acs.iecr.4c02472. [DOI] [Google Scholar]
  • 367. Sharma S., Ibhadon A. O., Francesconi M. G., et al., “Bi2WO6/C‐Dots/TiO2:A Novel Z‐Scheme Photocatalyst for the Degradation of Fluoroquinolone Levofloxacin From Aqueous Medium,” Nanomaterials 10 (2020): 910, 10.3390/nano10050910. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 368. Zhang W., Hu Y., Yan C., et al., “Surface Plasmon Resonance Enhanced Direct Z‐Scheme TiO2/ZnTe/Au Nanocorncob Heterojunctions for Efficient Photocatalytic Overall Water Splitting,” Nanoscale 11 (2019): 9053–9060, 10.1039/C9NR01732A. [DOI] [PubMed] [Google Scholar]
  • 369. Chen X., Huang X., and Yi Z., “Enhanced Ethylene Photodegradation Performance of g‐C3 N4 –Ag3 PO4 Composites With Direct Z‐Scheme Configuration,” Chemistry – A European Journal 20 (2014): 17590–17596, 10.1002/chem.201404284. [DOI] [PubMed] [Google Scholar]
  • 370. Ma S., Yang Y., Li J., et al., “Z‐Scheme Fe2(MoO4)3/Ag/Ag3PO4 Heterojunction With Enhanced Degradation Rate by In‐Situ Generated H2O2: Turning Waste (H2O2) Into Wealth (•OH),” Journal of Colloid and Interface Science 606 (2022): 1800–1810, 10.1016/j.jcis.2021.08.134. [DOI] [PubMed] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Data Availability Statement

The data that support the findings of this study are available from the corresponding author upon reasonable request.


Articles from ChemistryOpen are provided here courtesy of Wiley

RESOURCES