Skip to main content
International Journal of Molecular Sciences logoLink to International Journal of Molecular Sciences
. 2026 Oct 29;27(21):9706. doi: 10.3390/ijms27219706

Chiral Polythiophenes: Part II: Recent Advances in Synthesis, Structural Determinations and Applications

Dorota Krasowska 1,2,*, Rafał Karpowicz 3, Józef Drabowicz 1,4
Editor: Carlos Miguel Costa
PMCID: PMC13763516  PMID: 43027954

Abstract

This review aims to: (a) highlight key strategies for preparing non-racemic polythiophenes as single chemical entities or supramolecular thin-film architectures, (b) discuss their essential structural features and optical stability, and (c) overview their applications as chiral sensors, chiral catalysts, and optical materials. Special emphasis is placed on recent advances in the synthesis of chiral polythiophene, higher-order molecular organization driven by point, through-space, planar or axial stereogenicity, structure–property relationships, and the intended applications of these materials.

Keywords: π-conjugated polymers, chiral polythiophenes, stereogenicity, supramolecular helical chirality, chiroptical methods, electropolymerization, chemical polymerization, electrochromism, redox switching, chiral sensing, enantiodifferentiation

1. Introduction

Polythiophenes (PThs) represent versatile classes of π-conjugated polymers that have been widely investigated because they combine the electronic and optical properties of conjugated backbones with a well-defined structural architecture and/or chiral supramolecular assemblies [1,2,3]. The structural versatility of the thiophene ring enables precise molecular tailoring, giving rise to various subfamilies. In terms of structural rigidity, polythiophenes can be divided into unsubstituted polythiophenes and those substituted with side chains; the latter offer better solubility and processability. Based on regiochemistry, 3-substituted PThs can be split into regioregular polymers which have head-to-tail (HT) coupling at the α,α′-positions of the adjacent thiophene rings, and regiorandom polymers in which the substitution pattern alternates irregularly between the 3 and 4 positions along the polymer backbone. This report also covers donor–acceptor (D–A) thiophene-based copolymers.

Combining electron delocalization with molecular and supramolecular chirality yields advanced chiroptical phenomena, including intense circular dichroism (CD), circularly polarized luminescence (CPL), and chirality-induced spin selectivity (CISS) [4]. These properties make chiral polythiophenes promising for organic spintronics, molecular electronics, smart displays [5,6] enantioselective biosensors [7], asymmetric catalysis [8], and bioactive materials [9].

Molecular chirality originates from the presence of stereogenic atoms, chiral axes, or chiral planes (elements of stereogenity) within a single molecule. Molecular chirality, introduced via stereogenic elements or external chiral environments (chiral solvents, liquid crystals, chiral nanostructures, metal–organic frameworks (MOFs), and circularly polarized light (CPL) [10], transfers to the polymer backbone to form higher-order helical assemblies. This supramolecular chirality is governed by π → π* interactions, solvent-induced aggregation (generating bisignate Cotton effects), side-chain architecture, and thermal/processing kinetics. The reviewed studies highlight that optical activity in π-conjugated systems is governed more by supramolecular organization rather than molecular chirality alone.

Over the past decades, numerous synthetic strategies have been developed to prepare chiral polythiophenes and related copolymers [11,12]. Methods such as Kumada catalyst-transfer polycondensation (KCTP), Suzuki coupling, Stille polycondensation, and electrochemical polymerization have enabled the synthesis of π-conjugated systems with controlled regioregularity, molecular weight, and end-group functionality.

In recent years, several comprehensive or update reviews on chiral polythiophenes have been published. Ozturk et al. reviewed developments in the preparation and properties of regioregular thiophene-based π-conjugated polymers from 2012 to 2019 [13]. In 2021, Yin Xiao et al. published a review in Chirality [1] summarizing structural studies and applications over the preceding decade. M’hamed Chahma reviewed the applications of doped polythiophenes as biosensors in a 2021 report [7]. A chapter entitled “Chiral Conductive Polymers” was published in 2022 in a book series edited by Amiri and Hussain, and covers key aspects and potential applications of conductive polymers [14]. Similarly, a chapter titled “Application of Conductive Polymers in Electrochemistry” was published in the same series [9]. This review summarizes recent progress (2012–2025) in the synthesis, self-assembly, chiroptical behavior, and applications of chiral polythiophenes and related conjugated copolymers. It emphasizes advances in synthetic strategies, structural insights, and key phenomena such as supramolecular helicity, exciton coupling, and molecular recognition.

2. Phenomenon of Chirality of Polythiophenes

2.1. Origin and Generation of Chirality

Molecular chirality arises from covalent asymmetry within a single molecule and yields enantiomers that often have distinct physicochemical and biological properties. In polythiophenes, chirality transfer occurs when a stereogenic element (an asymmetric center, axis, or plane) in the side chains guides the polymer backbone to twist and pack into preferred left-handed (M) or right-handed (P) helices, as seen in helicenes and DNA. Therefore, chirality extends to macromolecular and supramolecular levels, producing helical structures that arise from non-covalent interchain assemblies. Beyond side-chain-directed transfer, optical activity can also be imparted externally through induced chirality driven by external environments. In this way, fully achiral polymers can still exhibit induced supramolecular chirality organized by a chiral template, driven by chiral solvents, liquid-crystalline media, metal-organic frameworks (MOFs), or circularly polarized light (CPL). In summary, strategies for generating chirality include direct covalent mechanisms that depend on the presence of a stereogenic element within structures and non-covalent routes that induce chirality through external environmental factors.

2.2. Chiroptical Methods

Optical activity is a physical property of a compound that rotates the plane of polarization of linearly polarized light. Optically active structures exist as two mirror images (enantiomers) that differ in the sign of their optical rotation. Optical activity was historically measured by optical rotatory dispersion (ORD) but is now primarily probed using circular dichroism (CD). Circular dichroism (CD) measures the difference in absorbance (Δε) between left- and right-handed circularly polarized light in the UV-VIS region [15]. CD spectroscopy provides deeper insight into chromophore organization and exciton coupling within aggregated structures, as well as monitoring conformational changes within the polythiophene backbone.

A monosignate Cotton effect occurs when an electronic transition in a chromophore generates a single band (peak or valley) in the CD spectrum. The bisignate Cotton effect is a specific CD outcome that occurs only when interacting chromophores aggregate in a chiral orientation and both split transitions remain optically active. This mechanism is called a Davydov splitting. In other words, the transition dipole moments of the adjacent chromophores undergo exciton coupling. These electrostatic dipole–dipole interactions split into two distinct collective exciton states (E+ and E−). In a chiral (helical or twisted) arrangement, Davydov splitting causes the two split states to absorb left- and right-circularly polarized light, producing two adjacent bands with opposite signs of the bisignate Cotton effect in the CD spectrum. The sign sequence of these split bands (positive-then-negative vs. negative-then-positive as wavelength decreases) directly indicates whether the supramolecular twist is right-handed (P-helix) or left-handed (M-helix). Davydov splitting is the spectroscopic footprint of supramolecular organization in the field of chiroptical profile of chiral self-assembly in π-conjugated materials, directly reflecting aggregate packing in the CD spectrum. A parameter used in chiroptics to quantify the ability of a chiral molecule to selectively absorb circularly polarized light is the absorption dissymmetry factor gabs. Its magnitude quantifies the difference between the molar absorption coefficients for left- and right-circularly polarized light divided by their average or sum (Equation (1)) to yield a value between −2 and +2, whose sign informs about the absolute configuration or handedness (P/M or d/L) of the chiral system.

gabs=εL−εR12(εL+εR) (1)

Furthermore, many conjugated polymers exhibit circularly polarized luminescence (CPL). CPL spectroscopy measures the differential emission of left- and right-circularly polarized light (ΔI = IL − IR). A positive value (+) indicates a predominance of left-circularly polarized light emission (L-CPL), while a negative value (−) indicates a predominance of right-circularly polarized light emission (R-CPL), which helps determine the stereochemistry and conformation of chiral molecules in the excited state (CPL) (or in the ground state if Δε from CD spectrum). However, the CD and CPL pathways differ in a few ways. CPL emission behaves differently due to Kasha’s rule, i.e., expressing distinct information in a non-radiative relaxation, exciton based on the absorption of a photon and transition to a higher energy level, monosignate dominance in CPL, which is due to emission originating predominantly from E−, producing a monosignate CPL spectrum rather than a bisignate one. The normalized parameter calculated from excited-state emission to quantify chiroptical strength in CPL spectroscopy is the luminescence dissymmetry factor, glum (Equation (2)).

glum=IL−IR12(IL+IR) (2)

CD and CPL are essential for tracking from the molecular scale to large supramolecular aggregates, with responses highly sensitive to molecular packing, aggregate morphology, film organization, and external factors such as redox switching or thermal annealing.

2.2.1. CD Spectroscopy

The self-assembly organization of poly{3,4-bis[(S)-2-methylbutoxy]thiophene} (PDMBT) was investigated as early as 1996 Langeveld-Voss et al. [16] using CD and CPL. Cooling a solution of PDMBT in dichloromethane to −30 °C induced ordered aggregation, as evidenced by a significant red-shift in the onset of absorption in the CD spectrum and emission in the CPL spectrum.

Another example involves a cyclodextrin-functionalized polythiophene whose chiroptical properties were investigated in dimethyl sulfoxide (DMSO), methanol, and 50% aqueous methanol using UV-Vis and circular dichroism (CD) spectroscopies [17] (Figure 1). The UV-Vis absorption spectra in all solvent systems exhibited a characteristic π → π* electronic transition centered at 450 nm. In the CD spectra, weak signals arising from induced chirality were observed within this π → π* transition region. Pure or aqueous methanol promotes a bisignate CD effect featuring a positive couplet, indicative of a right-handed helix, whereas DMSO yields a positive monosignate signal. These distinct chiroptical profiles demonstrate that the induced chiral conformation of the polymer backbone is heavily dependent on the solvation environment.

Figure 1.

Figure 1

UV/Vis and CD spectra in DMSO (0.406 mM), methanol (0.138 mM), and 50% aqueous methanol (0.129 mM) (all concentrations in the monomer unit). Reprinted with permission from Fukuhara, G. and Inoue, Y. (2012), Peptide Chirality Sensing by a Cyclodextrin–Polythiophene Conjugate. Chem. Eur. J.; 18: 11459–11464. https://doi.org/10.1002/chem.201201294 [17]. Published by John Wiley and Sons. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Chirality in regioregular 1 and regiorandom 2 poly [3-(S)-3′,7′-dimethyloctyl)thiophenes] was demonstrated and compared via circular dichroism (CD) [18] (Figure 2). CD enabled tracking of main-chain structural changes during micro-aggregation, distinguishing the ordered aggregated state from the random-coil structure in a good solvent. Furthermore, the bisignate pattern of the Cotton effect reveals the supramolecular helical handedness of both polymers.

Figure 2.

Figure 2

CD spectra of 1 and 2 differing in regioregularity in the solid state. Reprinted with permission from Bidan, G.; Guillerez, S. and Sorokin, V. (1996), Chirality in regioregular and soluble polythiophene: An internal probe of conformational changes induced by minute solvation variation †. Adv. Mater., 8: 157–160. https://doi.org/10.1002/adma.19960080213 [18]. Published by John Wiley and Sons. Copyright © 1996 Verlag GmbH & Co. KGaA, Weinheim.

In binary solvent systems, the supramolecular architecture was examined via CD spectra of regioregular polythiophene 1. The results showed a two-step aggregation through two ordered conformations (intermediate state unassigned), accompanied by a reversal of the CD spectrum across a narrow non-solvent window (40–42.5% MeOH, Figure 3, spectra d and e).

Figure 3.

Figure 3

CD spectra of 1 in chloroform/methanol binary solvent system at ratios (v/v) (a) 100/0, (b) 65/35, (c) 62.5/37.5, (d) 60/40, (e) 57.5/42.5, (f) 55/45, (g) 50/50. Reprinted with permission from Bidan, G.; Guillerez, S. and Sorokin, V. (1996), Chirality in regioregular and soluble polythiophene: An internal probe of conformational changes induced by minute solvation variation †. Adv. Mater., 8: 157–160. https://doi.org/10.1002/adma.19960080213 [18]. Published by John Wiley and Sons Copyright © 1996 Verlag GmbH & Co. KGaA, Weinheim.

Ikai et al. [19] reported that D-glucose-bearing polymer 3 adopts a stable, single-handed macromolecular helix in solution rather than undergoing intermolecular aggregation. This intramolecular origin is evidenced by concentration-independent CD spectra (C = 0.01–1.0 mM in chloroform). Furthermore, neither the absorbance nor the CD signal intensity changed after dense membrane filtration.

The other dependence on CD response was observed as CD intensity increased with molecular weight, plateauing at Mn < 3.4 × 104 g/mol (Figure 4). This molecular-weight dependence of the chiroptical properties is characteristic of a single-handed macromolecular helical conformation. These findings provide further evidence that the 3 backbone adopts a stable secondary structure in solution. Strong CD signals originating from the helical chirality of 3 were observed across good solvents such as THF and chlorobenzene.

Figure 4.

Figure 4

(A) SEC traces of fractionated components of 3 with different molecular masses (eluent, chloroform; polystyrene standards; di-model-TR states for dibromoquinquethiophene decorated with two sugar moieties). (B) Molecular mass dependence of the CD and absorption spectra of 3 in chloroform at 25 °C. Used with permission under a Creative Commons Attribution 3.0 Unported Licence from: Tomoyuki Ikai, Kokoro Takayama, Yuya Wada, Serena Minami, Chanokporn Apiboon, Ken-ichi Shinohara; Synthesis of a one-handed helical polythiophene: a new approach using an axially chiral bithiophene with a fixed syn-conformation. Chem. Sci. 2019; 10 (18): 4890–4895. https://doi.org/10.1039/c9sc00342h [19]. Copyright© 2019 The Author(s). Published by the Royal Society of Chemistry.

2.2.2. Circularly Polarized Luminescence

Polymer 3 exhibited orange photoluminescence (PL) in both solution and solid states, originating from its conjugated backbone with a fluorescence quantum yield of 5% in CHCl3. [19]. Its macromolecular helical chirality induced right-handed circularly polarized luminescence (CPL), yielding a maximum luminescence dissymmetry factor |glum| of 1.6 × 10−3 in chloroform and a significantly higher maximum luminescence dissymmetry factor glum = 6.9 × 10−3 in the drop-cast thin film.

Furthermore, the CPL signal intensity of 3 was superior to that of d-glucose-linked quaterthiophene, thus demonstrating that the helical conformation of the polymer backbone is of key importance for achieving enhanced CPL activity.

The optically active, through-space-conjugated polymers (Rp)-4 (Figure 5) and its (Sp) enantiomer emitted green photoluminescence in CHCl3 solution and exhibited mirror-image signals in their CPL spectra [20]. The authors noted that because CPL signals from optically active polymers typically appear only in films or aggregates, observing a clear CPL signal for a monodisperse polymer in solution is rare. Furthermore, they concluded that the arrangement of the [2.2]paracyclophane–based conjugated polymer is driven by the stacked π-electron network, where each stacked 2,2′′′-dixylyl-2,2′:5′,2′′:5′′,2′′′-quaterthiophene unit adopts planar/quinoid conformations in the excited state.

Figure 5.

Figure 5

[2.2]Paracyclophane–based conjugated polymer.

2.2.3. Other Structure Characterization Methods

Beyond chiroptical methods, techniques such as NMR spectroscopy, light scattering, X-ray diffraction (SAXS, GIWAXS), and microscopy (AFM, FE-SEM, POM) characterize the structure, stereochemistry, and morphology of complex supramolecular assemblies. Integrating these tools helps establish key structure–property relationships. Despite remarkable advances in synthesis and characterization, the relationship between molecular design and supramolecular organization, such as the principles of aggregation processes or chirality transfer, remains only partially understood.

2.3. Methods/Strategies for Introducing Chirality into Polythiophenes

Chirality is introduced into polythiophenes through several synthetic and physical strategies. These include covalent modification via the attachment of chiral side chains prior to polymerization (a topic detailed in Section 3, “Synthesis and Structural Determination of Non-Racemic Polythiophenes”), as well as supramolecular assembly routes. Supramolecular chirality-based methods cover the non-covalent transfer of chiral information, external field induction using chiral solvents, liquid-crystalline media, or chiral dopants, and physical stimuli such as circularly polarized light (CPL) (Examples of chirality transfer as an alternative approach for chirality induction are completed in Section 3.4). Furthermore, asymmetric electropolymerization in chiral templates such as cholesteric (chiral nematic, N*-LC) reaction media provides a direct pathway to chiral materials, as briefly discussed below within the scope of this review.

2.4. Induction of Chirality in Liquid Crystals (LCs)

Chiral liquid crystals (LCs) can serve as templating reaction fields to direct the macroscopic helicity of conjugated polymers during polymerization. Thermally invertible chiral LCs have been used for interfacial chemical polymerizations yielding helical polyacetylene films [21], whereas a photoinvertible chiral LC (N*-LC) was applied for the electrochemical synthesis of helical PEDOT [22]. This fatigue-resistant, photoinvertible N*-LC, was obtained by doping 5CB with a compound combining a photoresponsive bisbenzothienylethene core and axially chiral binaphthyl groups, imparting high helical twisting power (HTP). Reversible photoisomerization of the bisbenzothienylethene moiety between its open and photostationary state (PSS) closed forms flips the handedness of the LC matrix. Electrochemical polymerization of 3,4-ethylenedioxythiophene (EDOT) within this dynamic asymmetric field yields helical PEDOT (H-PEDOT) (Figure 6) with a direction of helicity transcribed from the LC matrix.

Figure 6.

Figure 6

Induction of helicity in poly(3,4-ethylenedioxythiophene)s (H-PEDOTs) during asymmetric electrochemical polymerization of EDOT within a chiral nematic liquid crystal (N*-LC) matrix containing photoresponsive chiral dopants. Reprinted with permission from S. Yoshida, S. Morikawa, K. Ueda, M. Hidaka, K. Kaneko, K. Kaneko, T. Hanasaki, K. Akagi, Photoinvertible Chiral Liquid Crystal that Affords Helicity-Controlled Aromatic Conjugated Polymers. Adv. Optical Mater. 2020, 8, 2000936. https://doi.org/10.1002/adom.202000936 [22]. Published by John Wiley and Sons © 2020 Wiley-VCH GmbH.

2.5. Aggregations Leading to Optical Activities

Self-assembly and aggregation govern the optoelectronic properties of π-conjugated polymers, as demonstrated by studies on three co-crystallizing chiral block copolymers 5–7 containing poly((S)-3-(3,7-dimethyloctyl)thiophene) and poly((S)-3-(3,7-dimethyloctyl)selenophene) blocks (Figure 7) [23]. Copolymers 5–7 and polythiophene homopolymer 8 undergo chiral self-assembly, whereas polyselenophene homopolymer 9 does not self-assemble in a chiral way due to strong Se–Se interactions. In the block copolymers, co-crystallization leads to partial segment mixing within the crystalline structure, replacing strong Se–Se interactions with weaker Se–S interactions to unlock chiral order. These copolymers exhibited a stronger chiral response than the corresponding homopolymers, which is attributed to a higher degree of disorder that promotes helical twisting. Spectroscopic studies (UV–Vis, CD) and DSC confirmed co-crystallization, while dynamic light scattering (DLS) indicated that the optical activity depends on molecular organization rather than aggregate size.

Figure 7.

Figure 7

Block copolymer 5–7 (top) and homopolymers of poly(thiophene) 8 and poly(selenophene) derivatives 9 (bottom).

The macromolecular structure of poly(3-alkylthiophenes) (P3ATs) also plays a key role in governing their supramolecular organization. Unlike linear analogues, star-shaped P3ATs (Figure 8), form more ordered structures with stronger chiroptical effects [24]. Enhancement of optical activity is manifested by a strong Cotton effect and a significant increase in the dissymmetry factor (g-factor) up to two orders of magnitude compared to linear analogue. Detailed mechanistic studies by two research groups further clarify the supramolecular assembly of these star-shaped systems [24,25].

Figure 8.

Figure 8

Structure of star-shaped P3AT (10) [24,25].

Importantly, this effect does not arise from increased electronic coupling between the arms, but from cooperative supramolecular organization [25]. The self-assembly of 10 may follow two different routes. In a solvent/nonsolvent system, aggregation proceeds via a multistep process starting with solvent-separated prenucleation clusters that lack electronic coupling (confirmed by CD and UV–Vis). Subsequently, with an increasing fraction of nonsolvent, partial chain planarization and increase in conjugation length occur, leading to highly ordered supramolecular structures with strong π → π* stacking interactions. In contrast, thermally induced aggregation proceeds in a single step at a critical temperature where simultaneous chain planarization and π → π* stacking occur, resulting in aggregates with greater size dispersity and less structural order.

Further insight into the mechanism of chiral amplification in these systems was provided by studies on heterogeneous star-shaped conjugated polymers [25]. Three possible scenarios were considered: a Sergeant-and-Soldiers-like effect, a “defect effect”, and hampered supramolecular organization. UV–Vis, CD, DSC, and AFM studies revealed that the heterogeneous systems formed less ordered aggregates and exhibited a significantly weaker chiroptical response than the fully chiral, symmetric star-shaped analogues. Notably, the chiroptical response decreased more strongly than would be expected solely from the reduced number of chiral arms, thereby excluding both the Sergeant-and-Soldiers-like mechanism and the “defect effect”. The results further indicate that principles established for linear P3ATs cannot be directly transferred to more complex star-shaped architectures and that a high degree of symmetry and structural homogeneity is essential for achieving strong chiroptical activity.

Aggregation of cationic polythiophene 11 and β-1,3-glucan polysaccharide chains of curdlan (Cur) 12 or schizophyllan (SPG) 13, driven by electrostatic interactions, leads to highly ordered supramolecular structures with pronounced optical activity (Figure 9) [26]. This assembly occurs via a hybridization mechanism that leads to the formation of hetero-triplex and hetero-duplex structures (Figure 10). In hetero-triplexes, two glucan chains stabilize one polythiophene chain, forming a helical complex with defined handedness. This structure imposes a helical conformation on the π-conjugated backbone, resulting in strong CD signals, even though the polythiophene itself is intrinsically achiral. Elevated temperatures or alkaline environments deprotonate glucan hydroxyl groups, driving homo-triplex dissociation and reorganization into more stable hetero-complexes with enhanced optical response. At high pH, a transition from hetero-triplex to hetero-duplex occurs relaxing the helical structure and altering conjugation length while maintaining persistent induced chirality.

Figure 9.

Figure 9

Structures of poly(3-(6-pyridiniohexyl)thiophene (PyPT) 11, curdlan (Cur) 12 and schizophyllan (SPG) 13 [26].

Figure 10.

Figure 10

The mechanism of the hybridization of PyPT and Cur, (a) the equilibrium of the homo-triplex with a pair of single and double strands of Cur; (b) The hetero-triplex of anionic double strands of Cur with a cationic PyPT; (c) a loosely bound hetero-duplex of a cationic PyPT and an anionic Cur strand; (d) the equilibrium of hetero-triplex and duplex consisted of a polythiophene and Cur chains. Adopted with permission from Electrostatically promoted dynamic hybridization of glucans with cationic polythiophene Org. Biomol. Chem. 2016; 14 (41), 9741–9750. https://doi.org/10.1039/c6ob01353h [26]. © 2016 The Author(s). Published by the Royal Society of Chemistry.

3. Synthesis and Structural Determination of Non-Racemic Polythiophenes

Several methods have been developed for preparing optically active polymers [1].

  • a.

    Polymerization of Optically Active Monomers Bearing Chiral Substituents [27]

Chiral polythiophenes (PThs), especially those with an optically active substituent at the 3-position, are widely studied. Beyond the chiral centers of the side-chain substituents, optical activity can manifest during the π → π* transition, resulting in chirality within the main polymer chain. The stereogenic side chains induce intramolecular helical order within aggregates or in the solid state, translating side-chain chirality into main-chain optical activity during π → π* transition.

  • b.

    Asymmetric Polymerization and Chirality Transfer [28,29]

In asymmetric variant of polymerization, prochiral monomer (either optically inactive or bearing a chiral auxiliary) is polymerized, to yield polymer with a defined backbone configuration or conformation, creating main-chain chirality.

Chirality transfer occurs during the electrochemical or chemical polymerization of achiral monomers when performed within a chiral matrix (e.g., a chiral liquid-crystal medium; Section 3.2.2), thereby transferring the matrix chirality into the polymer backbone.

  • c.

    Post-polymerization Chirality Induction in Achiral PThs

Induction of chirality after polymerization is achieved by introducing a chiral guest that binds to an optically inactive polymeric structure. For instance, an optically inactive polythiophene becomes chiral upon complexation with a chiral guest via acid–base interactions. This induction forces the conjugated main chain of the polymer to adopt a predominantly single-handed helical conformation [30,31].

Another example involves mixing achiral polythiophenes with chiral biomolecules, such as peptides or DNA [32,33], which impart their helical superstructures to the polymer. Driven primarily by electrostatic interactions, the polythiophene chains adopt a helical configuration with a preferred handedness dictated by the biomolecule, leading to the manifestation of supramolecular chirality in otherwise achiral PThs.

Similarly, achiral polythiophene bearing oxazoline pendant groups form optically active, metal-induced supramolecular aggregates upon complexation with chiral amines or in the presence of a chiral polythiophene, exhibiting supramolecular chirality even in good solvents (as confirmed by CD spectroscopy) [34].

3.1. The Synthetic Approaches Based on the Chemical Polymerizations

The majority of studies on chiral polythiophenes (PThs) focus on derivatives with enantiomerically pure side chains, which induce main-chain chirality or promote the formation of helical aggregates. Investigating diverse chiral substituents helps clarify how molecular and supramolecular structure governs overall physicochemical properties. The following two subsections discuss the development of chemical polymerization methods for regioregular and regiorandom 3-substituted PThs, (including foundational studies to better illustrate overall synthetic progress).

3.1.1. Synthetic Methods for Regioregular Chiral Polythiophenes

  • a.

    McCullough and Rieke Method

Synthetic approaches enabling regioregular head-to-tail (HT) coupling are highly sought after, as this regiochemistry imparts superior optical, electrochemical, and material properties. The evolution of these synthetic strategies is provided here in a brief historical overview.

The pioneering synthesis of chiral rrPThs (14, Scheme 1) was reported by Meijer in 1994 utilizing the McCullough protocol, which relies on a Ni-catalyzed cross-coupling polymerization of a 3-substituted thiophene monomer bearing an enantiomerically pure alkoxyethyl side chain [35].

Scheme 1.

Scheme 1

Synthesis of chiral regioregular polythiophene (PThs) 14.

In 1995, Meijer and Bouman reported that this polymer 14 undergoes stereomutation under rapid cooling conditions, resulting in a complete conformational reversion and a switch in the screw sense of the main chain while preserving the absolute configuration of its side-chain stereocenters [16]. In 1998, Ochiai and coworkers synthesized highly regioregular head-to-tail poly(3-[2-((S)-2-methylbutoxy)ethyl]thiophene) (14) utilizing a modified Rieke protocol (Scheme 1) [36,37]. Using the McCullough procedure, Guillerez and coworkers [18] synthesized poly(3-((S)-3′,7′-dimethyloctyl)thiophene) (15) (Figure 11), achieving 100% of HT couplings as determined by NMR spectroscopy.

Figure 11.

Figure 11

Polythiophenes 18 and 19.

  • b.

    Chemical Oxidative Polymerization

Andreani and coworkers [38] synthesized a chiral regiosymmetric polythiophene 16 from the centrosymmetric monomer 3,3″-di[(S)-(+)-2-methylbutyl]-2,2′:5′,2″-terthiophene via oxidative chemical polymerization with FeCl3 according to the Sugimoto protocol (Figure 11). As sulfur-containing side-chain representatives, poly(3-alkanesulfanylthiophene)s were prepared either chemically or electrochemically from 3-alkanesulfanyl monothiophene or β,β′-dithialkyl bithiophene precursors. For instance, tail-to-tail (TT) precursor, (+)-4,4′-bis[(S)-2-methylbutylsulfanyl]-2,2′-bithiophene 17, underwent FeCl3-mediated oxidative polymerization to yield regioregular poly(β,β′-disubstituted bithiophene) 18 (Scheme 2) [39].

Scheme 2.

Scheme 2

Synthesis of regiosymmetric disubstituted poly(bithiophene) 18.

Structural characterization via 1H NMR spectroscopy revealed a single aromatic resonance at 7.19 ppm, confirming the head-to-head/tail-to-tail (HH/TT) regiochemistry. UV-Vis and CD studies of 18 in various solvent mixtures demonstrated pronounced solvatochromic behavior and chiral supramolecular induction. In chloroform, 18 exists in a disordered, CD-inactive state with an absorption maximum at 469 nm (π → π* transition). Adding poor solvents (methanol or n-hexane) triggers chiral aggregation in reflected by UV-Vis and CD responses as an orange-to-violet color change, a red-shifted absorption spectrum with vibronic peaks at 530, 565, and 623 nm, and a bisignate Cotton effect in the absorption and circular dichroism spectra.

Separately, optically active poly(bithiophene) 20, incorporating a crown ether linker composed of oxyethylene and binaphthyl motifs, was synthesized in 22% yield via the [Fe(acac)3]-mediated oxidative coupling of a head-to-head (HH)-configured dimer 19 (Scheme 3) [40].

Scheme 3.

Scheme 3

The polymerization of bithiophene with binaphthyl-ether crown-appended pendants.

Full structural characterization of polythiophene 20 via 1H and 13C NMR confirmed selective polymerization at the reactive α-positions of the bithiophene unit. Gel permeation chromatography (GPC) determined a number-average molecular weight (Mn) of 3400 and polydispersity index (PDI) of 1.6. Notably, aa additional higher-molecular-weight fraction eluting above the upper exclusion limit of the GPC column was attributed to self-assembled aggregates formed through strong interchain interactions. Furthermore, polythiophene 20 exhibited chiroptical sensing capabilities toward chiral compounds upon host–guest inclusion, which can be monitored using UV-Vis absorption spectroscopy (Section 4.2).

  • c.

    Direct Arylation Polymerization (DArP)

Direct arylation polymerization (DArP) is an alternative, atom-economical synthetic approach to π-conjugated polymers via dehydrohalogenative coupling based on palladium-catalyzed C–H bond activation. Although this reaction manifold has been known since the early 1980s, its application to macromolecular synthesis was realized only recently. Conventional catalytic systems typically combine Pd(OAc)2 paired with a base such as K2CO3 and polar solvents like N,N-dimethylacetamide (DMA) or N,N-dimethylformamide (DMF). In some cases, phosphine ligands are employed. With this approach, poly(3-alkoxy(alkylsulfanyl)-4-cyano)thiophenes 23, 24 were synthesized via direct arylation polymerization utilizing K2CO3 (3 equiv.) and Pd(OAc)2 (10 mol%) in DMF (Scheme 4), pairing electron-donating alkoxy or alkylthio groups (21, 22) with electron-withdrawing cyano units [41].

Scheme 4.

Scheme 4

Synthesis of poly(3-alkoxy(alkylsulfanyl)-4-cyano)thiophenes 26–27.

More recently, Wakioka and Ozawa advanced DArP protocols using palladium catalysts, pivalic acid (PivOH), Cs2CO3 and a bulky phosphine ligands (L1 or L2); P(2-MeOC6H4)3 (L1) or P(2-Me2N-C6H4)3 (L2) [42,43,44]. This enabled the synthesis of highly head-to-tail (HT) regioregular poly(3-hexylthiophene) 26 from-bromo-3-hexylthiophene 25 with >99% regioregularity when employing Herrmann’s catalyst and ligand P(2-Me2NC6H4)3 (L2) (Scheme 5, top) [44]. Furthermore, this DArP methodology was extended to prepare donor–acceptor (D-A) copolymer 28 starting from 27 using a Pd2(dba)3·CHCl3/P(2-MeOC6H4)3 (L1)/PivOH/Cs2CO3 catalytic cocktail (Scheme 5, bottom).

Scheme 5.

Scheme 5

Synthesis of poly(3-hexylthiophene) 26 and copolymer 28.

  • d.

    Direct C-H Coupling Polymerization

As a complementary synthesis strategy, direct C-H coupling polymerization offers an alternative pathway to π-conjugated systems, as exemplified by the synthesis of poly(3-substituted thiophene) 29 with high head-to-tail (HT) regioregularity (ca. 82%) conducted utilizing [Pd(dppf)Cl2] (0.05 equiv.) as the catalyst (Scheme 6) [45]. Introducing electron-withdrawing, alkyl ester substituents stabilizes the HOMO energy level, widening the bandgaps, to 2.54–2.66 eV compared to standard poly(3-alkylthiophenes).

Scheme 6.

Scheme 6

Synthesis of poly[(S)-2-methylbutyl thiophene-3-carboxylate] (29).

  • e.

    Stille Polycondensation

Among the diverse synthetic routes to head-to-tail (HT) regioregular polythiophenes, Migita–Kosugi–Stille cross-coupling polycondensation is a notable step-growth method [46]. Goto, Ohkawa, and co-workers applied this approach to synthesize novel chiral polythiophenes 30a–30c by coupling (R)-octan-2-yl 2,5-dibromothiophene-3-carboxylate with 5,5′-bis(trimethylstannyl)-2,2′-bithiophene in both achiral toluene and a chiral liquid crystal (CLC) medium (Scheme 7) [47]. This procedure yielded a copolymer that adopts a supramolecular chiral conformation in an achiral solvent, driven by point stereogenic centers. Alternatively, when the polycondensation was conducted in a chiral medium, asymmetric induction was mediated directly by the solvent environment. Circular dichroism (CD) spectra of 30a–30c in CHCl3 revealed a preferred main-chain twist, giving a positive Cotton effect at 400 nm and a negative one at 300 nm (absent in 30c). Polymer 30c showed chiroptical activity in the absence of a chiral medium, indicating that its macromolecular asymmetry arises from spontaneous aggregation driven by its chiral pendant group. Polymer 30b, synthesized from the (R)-configured monomer within an (S)-configured CLC matrix, displayed significantly more intense CD signals than either 30a or 30c. Although polymer 30c showed clear CD signals without a chiral medium, the enhanced optical activity of 30b suggests a dual mechanism. Specifically, the structural chirality of 30b arises from synergistic chirality transfer from the CLC host alongside spontaneous chiral aggregation.

Scheme 7.

Scheme 7

Stille polycondensation in various reaction media leading to poly(terthiophene) derivative 30.

A similar Stille coupling polycondensation was applied to produce polythiophenes 31, 32 featuring α, α′-conjugated thiophene backbone of alternating bithiophene and 3-(alkoxyalkylthio)thiophene units (Scheme 8) [48]. The polythiophenes, containing alkyl side chains with one (R)- or (S)-chiral carbon atom were converted into enantiopure chiral nanoparticles ((R)-or (S)-NPs) via reprecipitation.

Scheme 8.

Scheme 8

Synthesis of poly(terthiophenes) containing alkoxyalkylsulfanyl side chains with one R or S stereogenic carbon atom.

The (S)-polymer exhibited a blue-shifted absorption relative to the (R)-enantiomer, indicating lower solution-phase aggregation. In the nano-assembled state, (R)-NPs were blue-shifted compared to (S)-NPs. Moreover, comparing the spectra of the NPs with the solution spectra of polymers, the growth of an absorption peak at 580 nm was observed, which was attributed to dense interchain aggregation within the nanoparticle cores. The quantum yields of R and S polymers 32a and 32b in THF and of the nanoparticles in water suspension were measured, indicating values of 10% for the polymers and under 1% for the NPs, nevertheless, the NP luminescence remained sufficient for intracellular imaging. Circular dichroism confirmed the transfer of chirality from the side chains to the backbone within the π → π* transition region, with the NPs displaying a significantly enhanced Cotton effect relative to the molecularly dissolved polymers.

The procedure via Stille coupling (co)polymerization was applied to link a glucose-decorated 5,5′-dibromobithiophene 33 with 2,5-bis(stannyl)thiophene 34 to provide an optically active, one-handed helical polythiophene built up from an axially chiral bithiophene 35 (Scheme 9) [19]. Owing to the structurally constrained syn-conformation of the bithiophene unit, the polymer adopted helical conformation which persisted in solution without requiring aggregate formation. The intense CD signals arisen from the helical chirality of 35 were even present in such good solvents, as tetrahydrofuran and chlorobenzene [see Section 2.2.1]. This system represents the first example of a one-handed helical polythiophene in good solvents whose backbone conformation remains essentially invariant to environmental factors such as changes in concentration, temperature, or solvent polarity.

Scheme 9.

Scheme 9

Synthesis of one-handed helical, glucose-decorated poly(terthiophene).

  • f.

    GRIM Grignard Metathesis Polymerization/Kumada Catalyst-Transfer Polycondensation KCTP

Grignard metathesis (GRIM) is a nickel-catalyzed cross-coupling polymerization utilizing i-PrMgCl, and [Ni(dppp)Cl2]. The mechanism involves a catalytic cycle consisting of three key steps: oxidative addition, transmetalation, and reductive elimination. This method was first developed in 1999 by McCullough [11,49] and was subsequently advanced by Yokozawa et al. [50,51]. Later, this regiocontrolled polymerization pathway was established as Kumada catalyst-transfer polycondensation (KCTP). Further studies provided deeper insight into the mechanism, revealing that KCTP proceeds via a “quasi-living” chain-growth mechanism that consistently yields polymers with exceptionally high HT regioregularity. This mechanism is characterized by unidirectional polymer chain propagation, where the addition of each monomeric unit regenerates the active catalytic species at the growing chain end.

Following this procedure [49], cyclodextrin-functionalized polythiophene 36 was prepared (Scheme 10) to evaluate its chiroptical sensing capabilities toward essential biomolecules [17].

Scheme 10.

Scheme 10

The preparation and polymerization of the permethyl-α-cyclodextrin-modified thiophene monomer.

The 1H and 13C NMR spectra of polymer 36 show one singlet proton signal in the aromatic region and four carbon resonance signals of the thiophene ring, indicating the formation of a uniformly head-to-tail coupled polythiophene.

Evaluated in 50% aqueous methanol, 36 exhibited host–guest binding and chiral recognition toward various amino acid derivatives and dipeptides, among which Tyr and 4-NO2-Phe exhibited the highest binding affinities and superior enantiodiscrimination (also see Section 4.2).

To study how side-chain heteroatoms (oxygen vs. sulfur) affect macromolecular self-assembly, regioregular head-to-tail polythiophenes 38a,b were synthesized from monothiophenes functionalized at the 3-position with either a chiral (S)-2-methylbutyloxy or (S)-2-methylbutylsulfanyl moiety 37a,b according to GRIM polymerization [52].

Additionally, FeCl3-mediated oxidative coupling of bithiophenes 39a,b yielded the corresponding head-to-head/tail-to-tail (HH/TT)-configured polymers 40a,b (Scheme 11).

Scheme 11.

Scheme 11

Synthesis of regioregular head-to-tail (HT) polythiophene 38a,b and head-to-head/tail-to-tail (HH/TT) polymers 40a,b.

1H-NMR spectroscopy in CDCl3. revealed that alkylsulfanyl-functionalized polythiophene 38b possesses 90% head-to-tail (HT) regioregularity (singlet at 7.38 ppm), whereas the alkoxy analogue 42a showed a broad aromatic signal indicating a predominantly HT configuration. For polymer 40b, the 1H-NMR spectrum displayed a thienyl backbone proton (H-4) resonance at 7.2 ppm, alongside intense end-group signals, indicating a relatively low molecular weight for this sample. In contrast, the 1H-NMR spectrum of 40a pointed to a regiorandom architecture, evidenced by three broad signals at 7.13, 6.97 (dominant), and 6.83 ppm. These split resonances were assigned to a complex mixture of regioirregular dyad and triad linkages such as HH/TT, HH/TT/HT, and HT/HT within a predominantly HH/TT-linked oligomeric framework.

Regioregular head-to-tail (HT) poly(3-(S)-2-methylbutylthiophene) ((S)-P3MBT) 41 and its semifluoroalkyl end-functionalized analogue ((S)-P3MBT-F17) 42 were synthesized via Kumada catalyst-transfer polycondensation (KCTP) utilizing a nickel catalyst. (Scheme 12) [53,54].

Scheme 12.

Scheme 12

Synthesis of ((S)-P3MBT) 41 and ((S)-P3MBT-F17) 42.

Kumada catalyst-transfer polycondensation (KCTP) was selected to synthesize poly(3-alkylthiophene) arms, which were subsequently used to construct high-molecular-weight, star-shaped compounds 10 and 46 (Scheme 13) [24]. THF solution provided the polythiophenes 43a,b with the required low dispersity and controlled molar mass. Three postpolymerization steps were next performed: (1) deprotection of the silyl-protected alcohol function of 43a and 43b with an excess of TBAF·3H2O to afford the compounds 44a and 44b (confirmed by 1H NMR upfield shift of the CH2 signal from 4.75 to 4.70 ppm); (2) azide formation by reacting 44a and 44b with diphenylphosphoryl azide and 1,8-diazabicycloundec-7-ene (DBU); and (3) click-coupling, a copper(I)-catalyzed alkyne-azide cycloaddition, by attaching the azide-functionalized chiral and achiral P3AT arms of 45a,b to the central core in the presence PMDTA and CuBr, to yield the star-shaped polymers 10 and 46.

Scheme 13.

Scheme 13

Synthesis of star-shaped, C3-symmetric compounds 10 and 46.

Solvatochromic UV-Vis and CD measurements in chloroform/methanol mixtures showed that methanol addition induces self-assembly in star-shaped (10, 46) and linear (45a,b) polymers, which adopt random-coil conformations in pure chloroform.

For achiral polymers, this resulted in a red-shifted UV-Vis absorption band with fine structure but no CD signal. For chiral polymers, it triggered a strong bisignate Cotton effect, confirming the formation of a chiral supramolecular structure. In comparison, the linear polymers (45a,b) exhibited weaker aggregation. Notably, the C3-symmetric chiral star polymer displayed a 100-fold stronger CD response than its linear arm counterpart, underscoring a greatly enhanced chiral organization driven by the star-geometry.

The same synthetic pathway was applied to prepare mixed-arm star analogues 48, 49 containing both chiral and achiral polythiophene arms (Scheme 14) [25]. The main objective of this study was to investigate how incorporating different types of arms into the star-shaped system impacts its supramolecular organization and chiral response. Using UV-Vis, CD, DSC, and AFM analyses, three models were evaluated (“sergeants-and-soldiers”, “defect effect”, and “hampered organization”). Only the **hampered organization** model was applicable, as replacing even a single chiral arm with an achiral substitute introduced structural defects that severely disrupted self-assembly.

Scheme 14.

Scheme 14

Synthetic pathway to the heterogeneous star-shaped P3ATs (48 and 49).

Supramolecular experiments in chloroform/methanol mixtures revealed aggregation onsets at 40% MeOH for 48 and 35% MeOH for 49. Compared to the C3-symmetric chiral star polymer 47b, both 48 and 49 displayed weaker UV-Vis fine structures and lower bisignate Cotton signals in their CD spectra, confirming less ordered aggregation under the hampered organization hypothesis. Temperature-variable CD spectroscopy proved unsuitable for evaluating chiral expression, as it produced weaker signals lacking a positive bisignate Cotton effect.

Finally, UV-Vis and CD spectra were recorded for spin-coated films of 48 and 49 both before and after thermal annealing. Unannealed samples mirrored solution solvatochromism, confirming hampered organization in the solid state. Upon thermal annealing, the chiral response decreased for 48 but increased for 49, with both losing their bisignate Cotton shape. Complementary AFM imaging pointed to a tendency to organize into well-defined fibers.

Highly stereoregular, chiral magnetic block copolymers 52, 53 containing a polythiophene backbone, a magnetic phenoxy radical and chiral side chains were synthesized via a Grignard metathesis (GRIM) (Scheme 15). The two corresponding homopolymers 50, 51 were also prepared. Chiral substituents successfully induced one-handed chiral J-aggregation within block copolymer [55].

Scheme 15.

Scheme 15

Synthesis of homopolymers 50, 51 and copolymers 52, 53.

Electron spin resonance (ESR) spectroscopy confirmed the generation of phenoxy radicals, suggesting potential antiferromagnetic behavior. Ultimately, the investigation of its optical activity and spin electronics demonstrates that the polymer successfully incorporates both optically active and magnetic blocks.

  • g.

    Dehydrobrominative Ni-Catalyzed Polycondensation with Knochel-Hauser Base

Another valuable synthetic method for nickel-catalyzed polymerization is a Kumada coupling variant [56] (Scheme 16) based on dehydrobrominative polycondensation using a Knochel-Hauser base.

Scheme 16.

Scheme 16

General concept.

This synthetic route was exploited to prepare regioregular poly(3-(alkylsulfanyl)thiophene)s which upon a post-polymerization oxidation were converted to the corresponding poly(3-(alkylsulfonyl)thiophene)s (Scheme 17) [57].

Scheme 17.

Scheme 17

Synthesis of chiral regioregular poly(3-(alkylsulfanyl)thiophene)s 54, 55 and poly(3-(alkylsulfonyl)thiophene)s, 56 and 57.

The resulting chiral helical poly(3-(alkylsulfonyl)thiophene)s, 56 and 57 exhibited high magneto-optic (MO) activity, distinguished by an enormous Faraday effect with Verdet constants reaching up to (7.63 ± 0.78) × 104 deg T−1 m−1 at 532 nm. The sign and magnitude of the Verdet constant depended directly on polymer helicity, establishing a promising strategy for designing novel materials with tailored magneto-optic properties.

In solution, (S)-55 and (S)-SO2-67 displayed strong bisignate Cotton effects for the π → π* transitions. No Cotton effect was observed for racemic 54 and 56, nor for (S)-57 in pure THF. However, adding methanol as a poor solvent induced a strong CD signal for (S)-57, confirming ordered helical aggregation. The spectrum revealed first a negative-then-positive CD band at longer wavelengths, implying P-helicity with a right-handed chiral assembly.

  • h.

    RuPhos Protocol–(Pd-catalyzed Negishi Coupling Polymerization)

Another strategy to synthesize regioregular polythiophenes is Pd–RuPhos-catalyzed Negishi polymerization using organozinc halide intermediates generated from a Pd–RuPhos–thiophene initiator. This chain-growth polymerization yielded a series of chiral poly(3-alkylthiophene)s (60–66), with regioregularity controlled by adjusting the ratio of organozinc isomers 58 (2-bromo-5-bromozincio-3-alkylthiophene) and 59 (2-bromozincio-5-bromo-3-alkylthiophene) (Scheme 18) [58].

Scheme 18.

Scheme 18

Synthesis of a series of chiral poly(3-alkylthiophenes) with a different regiochemistry (64–70).

This synthetic strategy incorporated all three coupling configurations, head-to-tail (HT), tail-to-tail (TT), and head-to-head (HH), into the polythiophene backbone, enabling a systematic study of regioregularity–property relationships via UV-Vis, CD, DSC, and AFM. It was hypothesized that the percentage of HT couplings can be predicted, provided that all coupling types are integrated via a statistical copolymerization of the two constituent isomers. Theoretically, increasing the ratio of isomer 58 should yield a higher proportion of HH couplings, reaching a maximum when equimolar amounts of both isomers were utilized. The experimentally obtained dyad compositions of polymers 60–66 were quantified using 1H NMR spectroscopy and compared against theoretical statistical curves. The experimental data closely matched the theoretical values (with a minor deviation for 66), confirming a true statistical copolymerization mechanism. Finally, the average molar masses and dispersities (PDI) of the resulting polymers were evaluated via gel permeation chromatography and are summarized in Table 1.

Table 1.

Polymers composition and molar masses.

Product Percentage of 63 Used % HT Coupling % HH Coupling % TT Coupling Mn [kg/mol] PDI
60 100 100 0 0 8.5 1.45
61 100 100 0 0 8.8 1.25
62 99 95 3 2 9.1 1.45
63 97 92 4 4 8.1 1.50
64 95 89 5 6 8.0 1.35
65 90 83 8 9 7.9 1.40
66 50 56 21 23 8.4 1.40

Chiral poly(3-alkylthiophene)s (P3ATs) containing a single head-to-head (HH) 67 or tail-to-tail (TT) regiodefect 68 at varied backbone positions were synthesized via the controlled Pd–RuPhos protocol (Scheme 19 and Scheme 20) [59]. 1H NMR spectroscopy confirmed the degree of polymerization and defect incorporation through triad signal assignments following the method of Barbarella et al. [60]. This analysis enabled the establishment of the chemical shifts of aromatic protons dependent on their specific triad environment (HT-HT, HT-TT, HT-HH, or TT-HH). Supramolecular assembly was monitored via UV-Vis and CD solvatochromism experiments in chloroform/methanol. For HH-defective polymers, a single terminal defect enhanced conformational flexibility, preventing kinetic trapping, and yielded a higher CD response than the fully regioregular polymer 69. Shifting the HH defect toward the chain center shortened regioregular segments, lowering chiral packing efficiency (gabs) and CD signal. In contrast, TT defects generally reduced the chiral response relative to regioregular 69 (see synthetic approach, Scheme 21), with their optimal position shifting closer to the chain center compared to HH analogues.

Scheme 19.

Scheme 19

Synthesis of poly(3-alkylthiophene) 67 containing a single head-to-head (HH) type coupling.

Scheme 20.

Scheme 20

Synthesis of poly(3-alkylthiophene) 68 containing a single tail-to-tail (TT) type coupling.

Scheme 21.

Scheme 21

Synthesis of regioregular poly(3-alkylthiophene) 69.

3.1.2. Synthetic Methods for Chiral Polythiophenes with Regiorandom Type of Couplings

FeCl3-Mediated oxidative coupling was employed to synthesize an optically active polythiophene 70 functionalized with chiral isothiouronium pendant groups (Scheme 22). Specific anion addition induced helical chirality through supramolecular aggregation [61].

Scheme 22.

Scheme 22

Synthesis of optically active polythiophene via oxidative coupling according to Sugimoto procedure.

In a 1:1 (v/v) H2O–MeOH mixture, polythiophene 70 exhibited an absorption band at 420 nm and no CD signal, indicating a random-coil conformation. The addition of the PF6− anion altered both the UV-Vis and CD spectra; specifically, by inducing a bathochromic shift alongside a split-induced CD (ICD) pattern within the π → π* transition region. FE-SEM confirmed  PF6− anion—driven helical aggregation, revealing a networked fibrillar morphology.

Recently, chemical oxidative polymerization has been utilized to prepare novel chiral polythiophenes 71–77 [62]. The resulting polythiophenes contained at the 3-position of the thiophene rings a pendant group featuring a stereogenic sulfur atom (in the structures of sulfoxides 71–73, sulfoximines 74, 75, or sulfinates 76, 77) (Figure 12). FeCl3-mediated oxidative coupling of enantiomerically pure sulfoxide-based thiophenes caused racemization at the side-chain sulfur stereocenter due to generated HCl, whereas using Fe(ClO4)3 during oxidative coupling preserved optical activity; sulfoximines and sulfinates resisted racemization under all conditions. This resistance to racemization is attributed to the high configurational stability of the sulfoximine and sulfinate side chains at sulfur. Beyond the optical activity originating from the localized chiral centers, CD spectroscopy confirmed induced chirality within the conjugated polythiophene backbone. Finally, solution fluorescence quantum yields (ΦF), determined using the relative Williams method, ranged from 6% to 24%.

Figure 12.

Figure 12

A series of regiorandom chiral polythiophenes 71–77 containing side chains with a point stereogenity at a sulfur atom.

3.2. Electrochemical Polymerizations

3.2.1. Polythiophenes Functionalized with Chiral Substituents

In 1988, Roncali and Lemaire reported the synthesis of chiral, 3-alkoxyalkyl-substituted polythiophenes 78 via electropolymerization (Figure 13) [63,64]. Although the resulting undoped polymer film possessed random regiochemistry, it still exhibited a remarkably high specific rotation of +3000 or −3000 for the respective opposite enantiomers. A comparison with the specific rotation of the corresponding monomers, which showed values of +22.5 or −22.5 (2%, CHCl3), clearly demonstrated the effect of macromolecular stereogenicity. Additionally, these polymers showed chiral discrimination toward two doping agents, (+)- and (−)-10-camphorsulfonic acid, owing to the formation of diastereomeric salts in the oxidized state. Through this example, the authors demonstrated that pioneering amperometric stereoselective recognition using doping agents.

Figure 13.

Figure 13

Polythiophenes 78 and 79 obtained by electropolymerization.

Ghosh and coworkers electropolymerized (S)-(+)-3-(2-methylbutyl)thiophene to yield chiral polythiophene 79 as a potential asymmetric electrode for chiral electrosynthesis (Figure 13) [65]. In 2001, the electrochemical polymerization of 2,2′-bithiophene functionalized with (S)-2-methylbutylsulfanyl chains 17 was employed in the synthesis of a regiosymmetric head-to-head/tail-to-tail poly(β,β′-disubstituted bithiophene) 18 (Scheme 23) [39]. The polymer exhibited different electrochemical behavior in tetraethyl- and tetrabutylammonium hexafluorophosphates as supporting electrolytes, indicating a dependence on the cation size.

Scheme 23.

Scheme 23

Synthesis of poly(β,β′-disubstituted bithiophene) 18.

The self-assembly of regiosymmetric polythiophene 18, both in solution and in the solid state, was characterized via UV–Vis, CD, and AFM. Circular dichroism (CD) spectroscopy revealed a weak, bisignate Cotton effect with a positive signal at longer wavelengths, comparable to those reported for chemically synthesized samples. However, this weak signal corresponding to low optical activity likely arose from rapid film formation. As monitored by UV–Vis spectroscopy, macromolecular aggregation can be induced by the addition of a non-polar poor solvent (e.g., n-hexane) to the chloroform solution. Atomic force microscopy (AFM) morphological analysis revealed a uniform, dune-like topography.

l-leucine-functionalized terthiophenes 80–83 were electropolymerized to yield chiral, conducting polymer surfaces (Scheme 24) [66]. overcoming the enantioselective recognition limitations of earlier alanine-bearing polythiophenes [67]. Subsequently, the resulting poly(terthiophene)s 84–87 were examined to determine whether their chiral conducting surfaces were capable of hydrogen-bonding interactions with other amino acids. For the 87-Pt electrode, cyclic voltammetry in the presence of d,l-alanine methyl ester revealed a concentration-dependent potential shift. Surface hydrogen-bonding interactions established a barrier that hinders electron transfer. Notably, 87-Pt formed stronger hydrogen bonds with l-leucine methyl ester than with d,l-alanine methyl ester.

Scheme 24.

Scheme 24

Electropolymerization of terthiophenes 80–83 in a 1 M n-Bu4NPF6/acetonitrile solution through repeated cyclic voltammetry (CV) cycling beyond the oxidation peak potential of the thiophene core-specifically at 0.660 V and 0.670 V (vs. Fc+/Fc) for compounds 84 and 87.

Electrochemical oxidation of chiral salen–thiophene chromium complexes yielded polymers 88–94 on a preparative scale, isolated as insoluble black powders recovered from the electrode surface (Scheme 25) [68]. No electropolymerization occurred when using the metal-free salen–thiophene ligands.

Scheme 25.

Scheme 25

Polythiophenes derived from chiral salen–thiophene chromium complexes 88–94.

The resulting polymers were evaluated as heterogeneous catalysts for asymmetric hetero-Diels-Alder (HDA), Henry (nitroaldol) and epoxide ring-opening reactions. While high activities and enantioselectivities were generally achieved, the catalytic performance varied across the systems: Polymer 88 catalyzed the HDA reaction of various aldehydes, maintaining stable activity over 15 recycling cycles. In the Henry reaction of aldehydes with nitromethane, it was reused five times with minimal yield/ee loss. However, 88 exhibited poor performance in epoxide ring-opening compared to its homogeneous counterpart. Polymers 89 and 92 outperformed 88 in the synthesis of 2-cyclohexyl-2,3-dihydro-pyran-4-one, demonstrating higher catalytic activity. The reaction catalyzed by 89 yielded up to 72% ee. The catalytic performances of these polymeric systems are summarized in Scheme 26, Scheme 27 and Scheme 28 (see also Section 4.3).

Scheme 26.

Scheme 26

Evaluation of catalytic activity of 88, 89, 92 in hetero-Diels-Alder reaction.

Scheme 27.

Scheme 27

Enantioselective synthesis of 1-(2-methoxy-phenyl)-2-nitro-ethanol prompted by catalysts: 88 and 89.

Scheme 28.

Scheme 28

Ring opening of 7-oxa-bicyclo [4.1.0]heptane with trimethylsilylazide prompted by catalysts: 88 and 89.

Electro-oxidative polymerization of enantiopure 3,4-ethylenedioxythiophene monomers, (2R,3R)- and (2S,3S)-2,3-diphenyl-3,4-ethylenedioxythiophene ((R,R)- and (S,S)-95, Figure 14), was found to be tunable via spin-polarized currents, depending on the electron spin orientation [69]. Electropolymerization was performed on a ferromagnetic electrode magnetized by an external magnetic field in either the “up” (pointing into the electrode surface) or “down” (pointing into the electrolyte) configuration. CD and UV–Vis spectra revealed that applying a magnetic field during electropolymerization significantly increased absorbance intensity, demonstrating enhanced chiral PEDOT film thickness relative to field-free conditions.

Figure 14.

Figure 14

Structure of monomers (R,R)- and (S,S)-(95).

3.2.2. Polythiophenes Lacking Chiral Substituents

Asymmetric electropolymerization of achiral monomers in cholesteric (chiral nematic) liquid crystal (N*-LC) and liquid-crystalline ionic liquid (N*-LCILs) reaction media became a powerful method for synthesizing helical, π-conjugated polymers that lack chiral substituents. Helical PEDOT films synthesized in N*-LCs exhibited a distinct spiral morphology coupled with good electroactive properties [70,71]. Furthermore, asymmetric electropolymerization of EDOT in cholesteric liquid crystalline ionic liquids (N*-LCILs) was achieved without the need for either a supporting electrolyte or an external chiral dopant [72]. For these polymerization processes, the N*-LCILs were prepared using two distinct approaches: by adding an axially chiral binaphthyl derivative as an external chiral dopant to imidazolium-based LCILs; or by incorporating a chiral binaphthyl phosphate counteranion directly into the LCIL structure.

Electrochemical Polymerization in Asymmetric Reaction Templates: Chiral Transcription in Cholesteric Liquid Crystals

Doping a nematic liquid crystal with a chiral molecule induces a chiral nematic phase (N*-LC, also referred to as the cholesteric phase) via the formation of a helical supramolecular structure. During the electrochemical oxidation of the monomer, the helical structure of the matrix forces the growing polymer chains into a helical π-stacked alignment, generating supramolecular chirality without requiring chiral monomer side chains. In line with this concept, asymmetric electropolymerization of 3,4-ethylenedioxythiophene (EDOT) was performed in a cholesteric liquid electrolyte mixture consisted of the liquid crystal 4-cyano-4′-hexylbiphenyl (6CB), tetrabutylammonium perchlorate (TBAP) as the supporting electrolyte, and a chiral dopant, (R)- or (S)-1,1′-binaphthyl-2,2′-bis[para-(trans-4-pentylcyclohexyl)phenoxy-1-hexyl] ether, to produce the corresponding thin-film polymers of (R)-PEDOT* and (S)-PEDOT*, respectively (Scheme 29) [73].

Scheme 29.

Scheme 29

Electropolymerization of EDOT within the N*-LC environment.

CD spectra of (R)-PEDOT* exhibited a positive Cotton effect, while (S)-PEDOT*displayed a negative effect above 320 nm, confirming main-chain helicity. Polarized optical microscopy (POM) revealed a double-spiral texture, indicating that single-handed twisted chains aggregate into 3D helical bundles. This approach (reported in 2004) demonstrated that the N*-LC matrix alone can induce macromolecular chirality without requiring chiral monomer substituents. for preparing chiral polymers.

The chirality of a nematic liquid crystal phase can be induced by adding cholesteryl pelargonate as a chiral dopant to liquid crystal (6CB) [74]. Within this medium, terEDOT (96) was electrochemically polymerized between ITO glass electrodes at 4.0 V to yield chiroptical PEDOT films (97) (Scheme 30). The CLC medium effectively templated polymer growth, inducing a one-handed helical aggregation.

Scheme 30.

Scheme 30

Electropolymerization of tertEDOT (96) using asymmetric reaction template.

POM analysis revealed that the polymer 97 retained the host CLC fingerprint texture. SEM imaging showed fibrillar aggregates featuring thin, clockwise-twisted helical bundles, with coil-like fibrils forming vortices in the interstitial spaces. In the absorption spectra, the electrochemically doped PEDOT* film displayed a peak at 538 nm assigned to the π → π∗ transition of the main-chain. Increasing the oxidation potential weakened this band, giving rise to new peaks at 756 nm (polarons) and 1298 nm (bipolarons). In situ CD spectra showed reversible chiral electrochromism: the reduced state exhibited a bisignate Cotton effect from intermolecular exciton coupling, while upon oxidation, the intercalation of perchlorate counterions increased the interchain spacing, without disrupting the overall chiral packing.

The Goto group investigated the mechanism of chiral induction during asymmetric electropolymerization in a cholesteric liquid crystal (CLC) medium using EDOT and newly designed heteroaromatic derivatives 98–112 (Figure 15) [75,76].

Figure 15.

Figure 15

Heteroaromatic monomers.

In these studies, cholesteryl oleyl carbonate 113 (COC, Figure 16) serves as a chiral dopant in 6CB due to its high helical twisting power and excellent compatibility. The mixture of chiral dopant 113, 6CB, monomer, and TBAP form the electrolyte solution for asymmetric electropolymerization. Polymerization was initiated by applying 4 V DC across ITO electrodes for 10 min to 1 h. Rinsing off the CLC electrolyte solution with a hexane/acetone or methanol/acetone mixture yielded polymeric films on the anode surface [75]. The optical and chiral properties of the resulting polymers are summarized in Table 2.

Figure 16.

Figure 16

Structure of cholesteryl oleyl carbonate.

Table 2.

Polymer Optical and Chiroptical Properties Summary.

Polymer Name Absorption Max (λmax) CD/Cotton Effect Profile (as Wavelength Decreases) Final Conformation. Helical Assembly
Poly(98) 470 nm Bisignate [1st (−), 2nd (+)] Left-handed helical aggregation
Poly(99) 490 nm Bisignate [1st (−), 2nd (+)] Left-handed helical aggregation
Poly(100) ~550 nm Bisignate [1st (+), 2nd (−)] Right-handed helical aggregation
Poly(101) ~430 nm Weak bisignate [1st (−), 2nd (+)] One-handed twisted conformation with helical aggregates (high density of structural syn and α–β defects)
Poly(102) ~410 nm Bisignate [1st (−), 2nd (+)]
Non-zero-crossing
One-handed twisted conformation with helical aggregates (fewer defects than poly(101))
Poly(103) 346 nm Bisignate [1st (−), 2nd (+)] Highly twisted single chains (caused by steric hindrance of methyl groups) and helical aggregation
Poly(105) and Poly(106) ~450–490 nm Bisignate [1st (−), 2nd (+)] Helical aggregation
Poly(EDOT) ~550 nm No detectable Cotton effect Achiral/No helical aggregation (despite identical UV–vis/IR to poly(bis-EDOT))
Poly(104) ~550 nm Distinct bisignate [1st (−), 2nd (+)] Helical aggregation
Poly(108) ~430 nm Intense bisignate [1st (+), 2nd (−)] Right-handed helical aggregation
Poly(109) Shorter wavelength ~350 nm Bisignate [1st (−), 2nd (+)] Helical aggregation (blue-shifted due to non-planar, unbridged biphenyl core)
Poly(110) ~430 nm No clear Cotton effect Achiral/No helical aggregation
Poly(111) ~560 nm (ICT)
1 band at 300–400 nm
2 or 3 bisignate peaks Helical aggregation
Poly(112) ~580 nm (ICT) 2 or 3 bisignate peaks Strong helical aggregation [bis(thienothiophene) acts as a stronger donor]

These characteristic optical and chiral variations among polymers sharing similar chemical backbones demonstrate that the choice of the parent monomer is critical for directing chiral assembly during CLC-templated asymmetric electrochemical polymerization. Furthermore, experiments using different chiral inducers (i.e., cholesteryl pelargonate (CP) and 4′-(4-hexyloxybenzoyloxy)biphenyl-4-carboxylic acid (S)-1-methylheptyl ester) with the same helical pitch yielded films with identical optical properties. This confirms that the helically aggregated polymer structures are templated not by the molecular chirality of individual dopants, but by the macroscopic helical molecular order of the bulk CLC phase.

The same research group reported that electrochemical polymerization under a magnetic field produces polymer films that exhibit linearly polarized electrochromism [77]. Polymer transcribes the magnetic-field-aligned liquid crystal (LC) order.

Later research utilized the chiral inducers (R,R)-114 and (S,S)-114, having double stereogenic centers, for asymmetric electropolymerization in a cholesteric (CLC) medium (Scheme 31) [78]. The polymerization produced chiroptically active atropisomers of 115, whose helical sense matched that of the CLC electrolyte.

Scheme 31.

Scheme 31

Synthesis of chiroptically active polymers 115 by electrochemical polymerization.

Later, Goto and Kawabata developed a light-driven asymmetric electropolymerization of terEDOT (96) conducted in a liquid crystal (LC) electrolyte solution under UV or visible (Vis) light irradiation to tune the chiral environment (Figure 17) [79].

Figure 17.

Figure 17

Schematic illustration of light-driven asymmetric electropolymerization.

In this study, the selected LC undergoes a photo-induced phase transition triggered by the trans–cis isomerization of the azobenzene moiety within the chiral dopant. This photoisomerization alters both the structure and the chirality of the cholesteric LC electrolyte, enabling the tuning of chiroptical activity during polymerization to yield polymer 97 (Scheme 32). Optical texture monitoring during irradiation revealed a multi-step photo-induced transition: (1) a planar texture, (2) a shift in the helical axis direction, (3) a transition from the cholesteric to the nematic phase, and (4) a transition from the nematic to the isotropic phase. Repeated isomerization cycles under visible light ultimately produced a distinct fingerprint texture.

Scheme 32.

Scheme 32

Light-driven asymmetric electropolymerization of terEDOT (96).

At low voltage, the CD spectra showed a split-type bisignate profile, indicating exciton coupling from intermolecular chiral aggregation (Figure 18a). The polymer retained partial chiral aggregation even when oxidized, stabilized by the intercalation of perchlorate ions between the polymer backbones during the redox process. Polymerization under UV irradation (30 min) (Figure 18b) yielded much weaker CD signals than under visible light. This confirms that the UV-induced cis-dopant disrupted the chiral ordering of the cholesteric phase.

Figure 18.

Figure 18

CD spectra of PterEDOTs at applied voltages from −0.5 V to +0.5 V. (a) PterEDOT prepared in cholesteric LC under Vis light (Poly(terEDOT) (Vis)). (b) Poly(terEDOT) prepared in cholesteric LC after UV light irradiation for 30 min (PolyterEDOT (UV30)). Adopted with a permission from: Hiromasa Goto, Kohsuke Kawabata; Light driven asymmetric polymerization: an approach for tele-control reaction. Polym. Chem. 2011; 2 (5): 1098–1106 [79] https://doi.org/10.1039/c0py00396d. Published by the Royal Society of Chemistry. © 2011 The Author(s).

To produce chiral PEDOT* films 97 with helical backbones, Goto et al. developed an asymmetric electropolymerization strategy (Scheme 33) using achiral terEDOT 96 in a cholesteric liquid crystal medium, doped with l-borneol-derived chiral inducers [80,81]. Helical twisting power (HTP) along with macroscopic HTP (βM) evaluations showed that inducers 118 and 119 exhibited higher βM values than 116 or 117, indicating that a greater number of bornyl groups enhances twisting ability. Inducers 120 and 121 were less effective due to differences in host LC matrix affinity.

Scheme 33.

Scheme 33

Asymmetric electropolymerization of terEDOT in the induced cholesteric LC electrolyte containing chiral inducers based on l-borneol 116–121.

Polarizing optical microscopy (POM) revealed a vortex structure in the film, mimicking the parent CLC fingerprint texture. Circular dichroism (CD) spectra of the polymers in their reduced state displayed a bisignate Cotton effect (Davydov splitting) indicating right-handed helical aggregation transcribed from the CLC template. The CD spectrum of the film in its oxidized state lacked a bisignate Cotton effect and exhibits broadly negative CD signals at long wavelengths, likely arising from the polaron band in the doped state.

Subsequent three-ring chiral inducers [82] were designed in order to achieve better twisting ability in asymmetric electrochemical polymerization. Recently, photoinvertible chiral liquid crystals combining a photoresponsive bis(benzothienyl)ethene unit and an axially chiral binaphthyl moiety were applied to the asymmetric polymerization of an EDOT dimer [22]. Reversible photoisomerization between the open form and the photostationary state (PSS) closed form inverted the LC matrix chirality under selective light irradiation (Scheme 34). CD spectra displayed positive or negative bisignate Cotton effects, demonstrating that the synthesized polythiophenes exhibited left- or right-handed helicity depending on whether the host matrix was in its open or closed PSS form.

Scheme 34.

Scheme 34

Chiral nematic liquid crystals based on 4-cyano-4′-pentylbiphenyl (5CB) containing photoresponsive chiral dopants.

Electrochemical polymerization was also carried out in a hydroxypropyl cellulose/N,N-dimethylformamide system (HPC/DMF), a lyotropic liquid crystal serving as an electrolyte solution, to afford the chiral, electroactive polymer poly(100), despite that the thiophene-isothianaphthene-thiophene triad monomer 100 used had no stereogenic center (Scheme 35) [83].

Scheme 35.

Scheme 35

Asymmetric electrochemical polymerization of [thiophene]-[isothianaphthene]-[thiophene] monomer.

The resulting polymer had a clear fingerprint texture in the polarized optical microscopic image. Because the HPC phase aggregates helically, its supramolecular chirality was transcribed onto the polymer film during electropolymerization. Upon electrochemical oxidation, a new polaron (radical cation) absorption band emerged at 960 nm. This band reversibly increased during oxidation and decreased during reduction, demonstrating stable, repeatable electrochromic behavior across doping/dedoping cycles.

More recently, Goto reported a strategy wherein a chiral monomer serves a dual function as both the chiral dopant to a liquid crystal (LC) matrix and the polymerizable unit [84]. By introducing a chiral quinquethiophene into a nematic liquid crystal (LC) matrix, the host mixture transformed into a chiral nematic (cholesteric) LC phase. Subsequent electropolymerization within this helically ordered matrix yielded a polythiophene film that imprinted the host’s helical supramolecular structure (Scheme 36).

Scheme 36.

Scheme 36

Chiral induction from nematic LC to cholesteric LC by chiral (+)-quinquethiophene, and its electrochemical polymerization. The insolubility of the polymer facilitates phase separation thus the resulting film of pure poly(quinquethiophene) with a helical structure was isolated after washing. Adopted with permission from: Goto, H. (2022). Reaction field induction self-amplification optical activity during polymerization in liquid crystal. Molecular Crystals and Liquid Crystals, 745(1), 26–39. https://doi.org/10.1080/15421406.2022.2073421 [84]. Rights managed by Taylor & Francis.

Electrochemical analysis showed that poly(quinquethiophene) underwent reversible doping/dedoping with perchlorate ions, characteristic of electroactive polythiophenes. Circular dichroism (CD) spectroscopy revealed a distinct Cotton effect originating from the π → π* transitions along the polymer backbone. A bisignate CD profile shifting from a positive to a negative signal with decreasing wavelength suggested a clockwise (right-handed) helical orientation.

Transcription of Chirality from Chiral Nematic Liquid-Crystalline Ionic Liquids

Chiral liquid-crystalline ionic liquids are utilized as functional media for asymmetric electrochemical polymerizations. To this end, two types of chiral nematic liquid-crystalline ionic liquids (N*-LCILs) were developed [72]: the first utilizes an axially chiral binaphthyl derivative as a chiral dopant (systems (R)-122 and (S)-122, Figure 19), while the second incorporates a chiral binaphthyl phosphate anion directly into an imidazolium-based LCIL framework (systems (R)-123 and (S)-123, Figure 19). The use of these N*-LCILs eliminates the need for additional supporting electrolytes or external chiral dopants during electropolymerization; due to their inherent ionic conductivity, the LCILs intrinsically function as both the reaction medium and the supporting electrolyte.

Figure 19.

Figure 19

Two chiral nematic liquid-crystalline ionic liquids (N*-LCILs).

The synthesized N*-LCILs were utilized as both chiral solvents and supporting electrolytes for the asymmetric electropolymerization of bi- and terEDOT, yielding helical poly(3,4-ethylenedioxythiophene)s (H-PEDOTs) with helically π-stacked chains and single-handed fibril bundles. Morphological analysis via scanning electron microscopy (SEM) revealed that the handedness of the helically π-stacked structures matched that of the parent N*-LCIL, whereas the macroscopic twisted and spiral morphologies were opposite to those of the template. CD spectra of the neutral (R)- and (S)-H-PEDOT films displayed negative and positive bisignate Cotton effects, respectively, within the π → π* transition region of the conjugated chain, confirming the formation of left- and right-handed helically π-stacked structures.

3.3. The Synthesis of Copolymers and Composites and Their Characterization

3.3.1. Nickel-Catalyzed Chain-Growth Polymerization (GRIM/Kumada Methods)

Grignard metathesis (GRIM), or Ni-catalyzed Kumada catalyst-transfer polycondensation (KCTP) represents a controlled/living chain-growth strategy applied to chiral block copolymer synthesis.

Kumada catalyst-transfer polycondensation (KCTP) was used to synthesize a hydrophobic polymeric block 124 consisting of regioregular head-to-tail (HT) β-substituted polythiophene (Scheme 37). Following the introduction of a terminal azide group, this block (S)-125 was subsequently conjugated to hydrophilic poly(acrylic acid) chains to yield an amphiphilic block copolymer 126 (Scheme 38) [85].

Scheme 37.

Scheme 37

Synthesis of hydrophobic polymeric block 124.

Scheme 38.

Scheme 38

Synthesis of amphiphilic block copolymer 126.

The copolymer with chiral polythiophene blocks 126 self-assembles into stable micelles upon adding water to its THF solution and exhibits an induced circular dichroism (ICD) due to the formation of supramolecular π-stacked chiral aggregates within the micellar core. These aggregates remained stable without precipitation for over 5 days, whereas homopolymer (S)-125 in a poor solvent mixture (CHCl3/methanol (1/1, v/v)) precipitated rapidly, losing over half of its CD intensity within 24 h. This indicates that micellar core encapsulation effectively stabilizes chiral supramolecular assemblies.

Kumada catalyst-transfer polycondensation (KCTP) was next employed to synthesize chiral α,ω-bifunctional polythiophenes by capping poly(3-((S)-3,7-dimethyloctyl)thiophene) with a 4-methylcatechol moiety at the α-terminus 127 and a thiol functionality at the ω-terminus 128 (Scheme 39) [86], or to obtain a series of phenyl end-capped analogues 129 and 130 (Scheme 40) [87]. The latter studies established that specific end-capping groups directly influence the chiral self-organization of the resulting copolymers.

Scheme 39.

Scheme 39

Synthesis of chiral α,ω-bifunctional polythiophenes.

Scheme 40.

Scheme 40

Synthesis of polythiophenes 129 and 130.

Similarly, amphiphilic block-copoly(thiophene)s 131 and 132 (Figure 20) bearing hydrophobic and hydrophilic blocks were synthesized via a one-pot Kumada cross-coupling using (o-tolyl)-Ni(dppp)Br as the initiator. The chirality was ensured by the presence of a chiral 3-((S)-3,7-dimethyloctyl)thiophene monomer facilitating chiroptical evaluation of polymer aggregation [88].

Figure 20.

Figure 20

Amphiphilic block-copoly(thiophene)s 131 and 132.

The identical KCTP methodology was expanded to synthesize various poly(thiophene)-b-poly(selenophene) copolymers 133, 6, 7 [23] (Scheme 41) enabling the study of the chiral expression and co-crystallization behavior of mixed-heteroatom block structures.

Scheme 41.

Scheme 41

Synthesis of various poly(thiophene)-b-poly(selenophene) copolymers.

However, synthesizing block copolymers whose individual blocks require two distinct mechanistic pathways is typically tedious and time-consuming. A more direct approach uses a single catalyst for a one-pot, living block copolymerization [89].

For example, a π-conjugated polymer macroinitiator 135 (Scheme 42) synthesized from 2-bromo-3-hexyl-5-chloromagnesiothiophene (134) via Kumada catalyst-transfer living polymerization was directly coupled with monomer (136) to yield the block copolymer 137 or with monomers 138 or 139 to afford 140 and 141, respectively.

Scheme 42.

Scheme 42

Synthesis of block copolymer 137, 140 and 141.

3.3.2. Palladium-Catalyzed Cross-Coupling Polycondensations (Stille and Suzuki)

This section highlights step-growth polymerizations utilized to synthesize alternating copolymers of thiophene and various aromatic components, focusing on how spatial and structural arrangements dictate backbone chirality. In 1993, Stille cross-coupling was established as a powerful synthetic tool when it was first used to polycondense alternating copolymers 142 consisting of thiophene and dialkoxyphenyl units (Scheme 43) [90,91].

Scheme 43.

Scheme 43

Synthesis of copolymers consisting of thiophene and dialkoxyphenyl units.

Utilizing this classic methodology, a benzotriazole–thiophene copolymer 143 functionalized with chiral (S)-2-ethylhexyl substituent was prepared (Scheme 44) [92]. CD and optical absorption spectroscopies demonstrated that this polymer forms chiral aggregates even at exceptionally low concentrations in dichlorobenzene.

Scheme 44.

Scheme 44

Synthesis of benzotriazole-thiophene copolymer.

About a decade ago, the fluorene–thiophene-based chiral copolymer 144 has been synthesized via Stille coupling of 2,7-dibromo-9,9-bis((S)-3,7-dimethyloctyl)fluorene with 2,5-bis(trimethylstannyl)thiophene (Scheme 45) [93]. Copolymer 144 showed unusually high optical activity in pristine and annealed thin films as demonstrated by intense circular dichroism signals.

Scheme 45.

Scheme 45

Synthesis of fluorene-thiophene based copolymer 144.

Compared to polyfluorene homopolymer, the absorption band of copolymer 144 exhibited large bathochromic spectral shifts; which pointed out that thiophene, as a strongly electron-donating unit, can tune the HOMO/LUMO levels significantly narrowing the energy bandgap.

Stille cross-coupling was used to conjugate a bithiophene unit with a C2-chiral thiophene-fused 9,9′-spirobifluorene, yielding copolymers 145 (unsubstituted) and 146 (hexyl-substituted), designed as switchable helical foldamers [94] (Scheme 46).

Scheme 46.

Scheme 46

Synthesis of copolymers 145 and 146.

It was expected that redox reaction would alter the planarity of bithiophene spacer units along the main chain, enabling a redox-driven conformational switch of the helical foldamers.

Through-bond chirality transfer was subsequently analyzed in chiral thiophene–thiophene (147, 148) and isothianaphthene–thiophene (149a,b) copolymers [95] synthesized via Migita–Kosugi–Stille cross-coupling (Scheme 47).

Scheme 47.

Scheme 47

Migita-Kosugi-Stille type coupling based copolymerization yielding chiral thiophene-thiophene and isothianaphthene-thiophene copolymers.

The polymer 147 showed a distinct, split-type Cotton effect in in its cast-film CD spectrum with a zero-crossing point at 447 nm matching its absorption maximum, indicating a 3D, single-handed helical π-stacked network. Other polymers in this series showed negligible chiroptical activity.

Thiophene-based copolymers containing biphenyl and phenyl units decorated with chiral nonyloxycarbonyl side chains were synthesized via Suzuki or Stille cross-coupling (Scheme 48) [96].

Scheme 48.

Scheme 48

Synthesis of copolymers via Suzuki and Stille coupling.

Copolymers that have three aromatic rings in their repeat units: 150 and 151 exhibited bisignate Cotton effects in the CD spectra of both solutions and films suggesting the formation of tightly packed, interchain helical π-stacks. According to the exciton coupling theory, the copolymer (R)-151 with a negative bisignate Cotton effect in the CD spectrum has a left-handed helical sense (M-helicity), whereas (R)-150, with a positive bisignate Cotton effect, adopts a right-handed helical sense (P-helicity). The authors proposed that chiral substituent position (phenylene vs. thiophene attachment) dictates the helical sense of π-stacked architecture, regardless of identical chiral configurations. Furthermore, these polymers exhibited RGB-colored fluorescence with quantum yields from 0.04–0.26 and showed circular polarization in their fluorescence bands. both in solution and solid-state. Polymer 152 consisting of two aromatic rings in the repeat unit, exhibited monosignate Cotton effect whereas 153 showed a slightly split Cotton effect, however, the CD intensities of the Cotton effects in both cases were very weak. The monosignate Cotton effect reflected through-bond chirality transfer without supramolecular helical π-stacking due to high solubility in chloroform.

A series of chiral polyfluorene–thiophene derivatives (154a, 154b and 154c) incorporating chiral side chains on the fluorene units was synthesized via Suzuki coupling reaction. The cross-coupling of chiral dibromofluorene monomers and thiophene-2,5-diboronic acid dimethyl ester successfully afforded the corresponding copolymers in 50–70% yields (Scheme 49) [97].

Scheme 49.

Scheme 49

The approach to chiral poly(fluorene–thiophene) copolymers by Suzuki cross-coupling based polymerization.

It was found that the new copolymers showed highly efficient CD and CPL signals in the green spectral region. Spin-coated films of 154b and 154c showed a relatively small Cotton effect in the π → π* transition region. Notably, the chiral substituent type controlled higher-order twisting direction: spin-coated films of 154b self-assembled in an anticlockwise (M-type) configuration, whereas 154c and 154a assembled into clockwise (P-type) helical architectures.

Similarly, two fluorene based copolymers linked with thiophene or bithiophene bearing chiral side chains, 155 and 156, were obtained by Suzuki coupling (Scheme 50) [98].

Scheme 50.

Scheme 50

Synthesis of fluorene-based copolymers by the Suzuki coupling method.

Circular dichroism measurements were conducted in methanol/chloroform mixed solutions and 155 and 156 exhibited strong bisignate Cotton effects. Characterization by X-ray diffraction and CD confirmed that variations in the structural spacer length significantly alter the orientation and configuration of the main chains.

Propylenedioxythiophene-phenylene (ProDOT-Ph) copolymer 157 bearing a chiral alkyl substituent directly on its propylene bridge was obtained via Suzuki cross-coupling (Scheme 51) [99].

Scheme 51.

Scheme 51

Synthesis of copolymer 157.

The thin film of compound 157 was coated by annealing at 120 °C to optimize the chiral assembly and demonstrate its electrochromic, electrofluorochromic, and chiroptical switching. The films displayed high coloration efficiency, transitioning reversibly between yellow (neutral) and blue (oxidized) states with concomitant fluorescence switching (quantum yield shifting from 3.8% to 0.21%). In solution, chiroptical characterization by CD spectroscopy showed a strong negative bisignate Cotton effect in the absorption for the π → π* transition of the polymer, while thin-film optical performance depended strongly on thickness, with annealed films outperforming pristine films.

An optically active through-space polymer 158 consisting of planar chiral [2.2]paracyclophane and quaterthiophene units was synthesized via Suzuki cross-coupling method (Scheme 52) [20]. Pure (RP)-(–)-enantiomer was isolated by chiral HPLC.

Scheme 52.

Scheme 52

Synthesis of copolymer 158.

The UV-Vis spectra of (Rp)- and (Sp)-158 displayed an absorption band with a maximum at 383 nm. The CD spectra of the resulting polymers, (Rp)- and (Sp)-158 exhibited mirror-image bisignate Cotton effects, with maximum absorption dissymmetry factors gabs of (RP) and (SP)-polymers 156 at ~410 nm equal to 8 × 10−4 and −9 × 10−4, respectively. This indicates that in solution, ground-state chirality is strongly induced in the stacked quaterthiophene moieties by the planar chiral [2.2]paracyclophane core. Both (RP)- and (SP)-158 emitted green fluorescence in CHCl3 solution with an absolute quantum yield of 7%. While CPL analysis alone makes it challenging to pinpoint the precise excited-state macromolecular conformation (such as zigzag, helical, or parallel geometries), these optically active polymers typically assemble into higher-order chiral superstructures.

3.3.3. Electrochemical Copolymerization or Deposition via Cyclic Voltammetry

Electrochemical copolymerization using cyclic voltammetry (CV) was employed to synthesize chiral copolymers 159 composed of EDOT and d or l-proline functionalized monothiophene units (Scheme 53) [100]. During the doping/dedoping process, the polymer films underwent reversible electrochromic switching, changing from blue-green in their doped (oxidized) state to blue-brown in their undoped (neutral) state.

Scheme 53.

Scheme 53

Synthesis of copolymers 159.

Direct electrochemical polymerization via cyclic voltammetry (CV) was used to construct chiral thiophene network from racemic monomers 160 and 161, which feature an axially chiral adamantane-based linker (Figure 21) [101]. Spectroelectrochemical analysis of films deposited on indium tin oxide (ITO)-coated glass demonstrated strong electrochromism: poly-161 shifted from yellow-green in the neutral state (<0.4 V) to navy blue when oxidized (1.0 V), whereas poly-160 transitioned from light yellow to deep purple. Charge carriers (polarons/bipolarons) are localized between adamantyl segments, restricting charge delocalization and favoring an interchain hopping transport mechanism.

Figure 21.

Figure 21

Racemic monomers 160 and 161 for electrochemical polymerization.

3.4. Alternative Routes to Chiral Polythiophenes: Chirality Transfer Strategies

Chirality transfer occurs through distinct pathways. One of the alternative strategies operates in situ during polymerization, where external chiral components such as chiral solvents [102], chiral polysilanes [103], or metal–organic frameworks (MOFs) [104] serve as an asymmetric templates to enforce specific chiral conformations in the growing polymer. Goto and coworkers have extensively studied in situ chirality transfer, using chiral ionic liquids and liquid-crystalline media [105,106] to induce helical architectures in polythiophenes (PThs); (see Section 3.2.2). Additionally, cellulose nanocrystals have been utilized as liquid-crystalline templates to facilitate chirality transfer in aqueous media [107]. Alternatively, chirality transfer takes place through post-polymerization processes as blending pre-synthesized achiral polythiophenes with chiral templates or complexing them into host –guest/inclusion compounds. Non-covalent intermolecular interactions, including electrostatic binding with biomacromolecules, further drive these post-synthetic transfers.

A representative example involves the transcription of chirality from a MOF matrix to an achiral polymer backbone [104]. In this approach, chiral transcription from the host framework [La(BTB)]n (162) (where BTB = 1,3,5-benzenetrisbenzoate) to unsubstituted polythiophene (PTh) took place inside the MOF nanochannels, and the induced chirality was retained even after liberating the polymer from the host. However, this retention depended on polymer loading: in low-loading composites (162:PTh = 1:0.03), host removal resulted in an almost complete loss of optical activity, whereas high-loading (1:0.30) preserved the rod-like morphology of the original channels.

Synthetically, the process begins by preparing nanochannels of opposite-handed lanthanum-BTB complexes (a (Λ)- or (Δ)-isomers forming three-bladed propeller geometries with left- or right-handed ligand twists). Terthiophene (TTh) monomer was then encapsulated into the pores of host (162) via sublimation, followed by in situ oxidative polymerization within the channels. The resulting composite displayed strong UV–Vis absorption corresponding to the π → π* transition of the conjugated PTh backbone. Inside the chiral host (162), PTh exhibited a Davydov split-type CD signal with vibronic features characteristic of exciton coupling between neighboring chromophores, confirming the helical packing of polymer chains in the pores. In summary, this host–guest transcription strategy offers a convenient route to impart retained chirality to optically inactive polymers (Figure 22).

Figure 22.

Figure 22

Schematic illustration of in situ monomer encapsulation, oxidative polymerization, and host liberation to form chiral polythiophene (PTh) using a chiral MOF matrix. Adopted with permission from Takashi Kitao, Yujiro Nagasaka, Masanobu Karasawa, Toshiki Eguchi, Nobuo Kimizuka, Kazuyuki Ishii, Teppei Yamada, Takashi Uemura; Transcription of Chirality from Metal–Organic Framework to Polythiophene. Journal American Chemical Society 2019; 141 (50): 19565–19569. https://doi.org/10.1021/jacs.9b10880 [104]. Copyright © 2019 American Chemical Society.

Chiral poly(3-hexylthiophene) nanowires (chiral nw-P3HT) were developed as organic chiral charge-transfer magnets by inducing supramolecular chirality through a ternary solvent mixture containing a good solvent, a poor solvent, and chiral co-solvent (R)-(+)-limonene [89]. The resulting twisted chiral nanowires (nw-P3HTs) exhibited optomagnetic coupling, demonstrated by tuning the polarization of transmitted light using an external magnetic field. Thin films were fabricated by coating the nw-P3HT solution onto quartz substrates, drying under vacuum, and annealing at 100 °C to remove residual (R)-(+)-limonene.

Similarly, chirality transfer mediated by (S)- and (R)-limonene enabled the preparation of optically active polymer particles of poly[(9,9-di-n-octylfluorenyl-2,7-diyl)-alt-bithiophene] from the corresponding achiral copolymer precursor 163 (Figure 23) [102].

Figure 23.

Figure 23

Structure of copolymers: 163, 164 and chiral templating silanes 165, 166.

Optimal chirality induction was achieved using a ternary solvent mixture of (S) or (R) limonene–chloroform–methanol in a ratio of 2:0.3:0.7 (v/v/v). Polymer particles of 163 exhibited the highest CD and CPL signal intensities. Both the choice of alcohol (acting as the poor solvent) and limonene enantiopurity strongly influenced the magnitude and sign of the CD and CPL signals, for instance, replacing methanol with ethanol inverted the sign of the CD spectrum, signaling a reversal in helical handedness. However, this limonene-mediated chirality transfer approach was restricted to poly(fluorene-thiophene) particles and cannot be applied to all π-conjugated polymers.

The copolymer poly{[9,9-di-n-octyl-fluorene]-alt-[4,7-bis(thiophen-2-yl)-2,1,3-benzothiadiazole]} (164) was complexed with chiral poly[n-hexyl-(S)-2-methylbutylsilane] (165) or poly[n-hexyl-(R)-2-methyl-butylsilane] (166) (Figure 23) to induce the formation of CD- and CPL-active heteroaggregates under self-assembly conditions [103]. The induced optical activity was fully maintained following photolytic scissoring of the polysilanes via UV irradiation at 313 nm. This provides a clear example of chirality transfer from sacrificial polysilane templates to conjugated copolymer chains that become intrinsically chiral upon aggregation.

Copolymerizing a non-thiophene monomer bearing a chiral substituent with achiral thiophene units is an effective strategy for imparting chirality to thiophene-based copolymers. For example, Stille cross-coupling between achiral thiophene units (containing 1–3 thiophene rings) and benzene-derived monomers with chiral side chains produced a series of optically active copolymers 167 (Scheme 54) [108]. These point-chiral substituents induce helical supramolecular organization along the conjugated copolymer backbone.

Scheme 54.

Scheme 54

Synthesis of copolymers 167.

In a follow-up study, the same research group synthesized copolymer 168 comprising unsubstituted thiophene units and N-substituted pyrrole units bearing mesogenic groups [109] via Stille polycondensation (Scheme 55). The resulting copolymer exhibited lyotropic liquid-crystalline behavior. Notably, these findings demonstrated that chiral mesogenic side chains can induce helicity along the π-conjugated backbone even across extended distances.

Scheme 55.

Scheme 55

Synthesis of copolymer 168 made up of unsubstituted thiophene units and pyrrole units with mesogenic group in N position.

Recently, the controlled synthesis of single-handed supramolecular block copolymers 169 from achiral poly(3-hexylthiophene) (P3HT) derivatives was achieved via asymmetric living supramolecular polymerization [110]. This supramolecular assembly was initiated using right-handed helical seed micelles. The constituent block copolymers comprising either chiral helical polyallene or achiral polyallene paired with P3HT were synthesized via a NiII catalyzed, sequential one-pot block copolymerization of the corresponding monomers (Scheme 56). The right-handed supramolecular block copolymers showed white-light emission and circularly polarized luminescence.

Scheme 56.

Scheme 56

Synthesis of single-handed supramolecular block copolymers 169.

4. Applications

4.1. Redox Switching in Chiral Polythiophenes

Supramolecular or macromolecular chirality of the investigated polymers can be switched (‘on’ and ‘off’) via electron transfer: oxidation of the polythiophene main chain achieved using chemical oxidants (e.g., copper(II) salts) or an anodic electrochemical potential and can be reversed through reduction using chemical reducing agents (such as amines or hydrazine) or electrochemical dedoping.

Redox-switchable supramolecular chirality was first demonstrated in HT-regioregular poly[3-{4-((R)-4-ethyl-2-oxazolin-2-yl)phenyl}thiophene] [111]. Reversible control over its chiral assemblies was achieved via main-chain electron transfer: oxidative doping using copper(II) trifluoromethanesulfonate [Cu(OTf)2] altered the assembly, while dedoping with triethylenetetramine restored the induced circular dichroism (CD) signals. Since this initial study, numerous examples of reversible chirality switching in supramolecular aggregates via electron transfer have been reported.

Redox-responsive, one-handed helical foldamers (Figure 24) consisting of both quaterthiophene and C2-chiral spirobifluorene skeletons provide a platform for chiral materials with dynamically controllable higher-order structures [94]. The concept of a redox-driven folding system is based on changes in main-chain rigidity. Takata et al. proposed that these materials have potential applications as hosts, catalysts, or highly selective sensors.

Figure 24.

Figure 24

Schematic illustration of the folding system with the planarity switchable spacer. Reprinted with permission from: Hitoshi Okuda, Yasuhito Koyama, Satoshi Uchida, Tsuyoshi Michinobu, Hiromitsu Sogawa, Toshikazu Takata; Reversible Transformation of a One-Handed Helical Foldamer Utilizing a Planarity-Switchable Spacer and C2-Chiral Spirobifluorene Units. ACS Macro Lett. 2015; 4 (4): 462–466. https://doi.org/10.1021/acsmacrolett.5b00176 [94]. Copyright © American Chemical Society.

4.2. Chiral Sensors

Chiral polymer-based electrodes are essential in biochemistry and pharmacology [7]. Their ability to differentiate biologically active enantiomers arises from the presence of stereocenters incorporated into the side chains of polymers depositing electrodes. By employing electrochemical methods i.e., CV (cyclic voltammetry) or DPV (differential pulse voltammetry), it is possible to differentiate for instance amino acid enantiomers [112]. In addition to polythiophene films bearing intrinsic stereocenters within their side-chain architectures, chiral electroactive surfaces on polymer-modified electrodes can be generated by doping achiral polythiophenes with chiral counteranions.

Electropolymerization was employed to prepare chiral polythiophene-modified electrodes from i.e., terthiophenes functionalized with d-alanine or d-leucine [66,67]. l-Leu-functionalized poly(EDOT) was electrodeposited onto electrodes in a manner similar to the coating of platinum (Pt) electrodes with d-leucine-substituted polyterthiophenes [113]. The polymer main chains were found to adopt helically twisted structures upon the introduction of chiral amino acid side chains, with dedoping serving to enhance the overall chirality. Conversely, PF6− dopant intercalation between the polymer chains expanded interchain spacing, relaxing helical twisting and weakening chirality. Chiral voltammetric biosensors based on functionalized poly(EDOT)s were fabricated for the detection of phenylalanine and 3,4-dihydroxyphenylalanine (DOPA) by electrodepositing polymers derived from monomers 170 and 171 onto a glassy carbon electrode (Figure 25).

Figure 25.

Figure 25

Structure of 170–172.

Enantiodifferentation of chiral compounds was successfully demonstrated using a glassy carbon electrode (GCE) coated with electropolymerized poly(EDOT) derived from monomer 172. This modified electrode registered electrochemical responses capable of distinguishing between the enantiomers d-/L-DOPA, d-/L-tryptophan, and (R)-/(S)-propranolol [114]. The pathway for enantiomeric differentiation involves the formation of two intermolecular hydrogen bonds between DOPA and hydroxymethylated polyEDOT molecules.

When DOPA enantiomers interact with the surface of the modified electrode, l-DOPA more easily binds to the right-handed derivative (R)-173 on a glassy carbon electrode, whereas the binding of d-DOPA is unfavorable. This selective interaction stems from the spatial conformation of L-DOPA which forms a thermodynamically favorable complex with the (R)-173 polymer film, whereas d-DOPA shows a preference for the (S)-173 enantiomer (Figure 26) [115].

Figure 26.

Figure 26

The interaction between DOPA enantiomers and chiral poly((S)-, (R)-2-(chloromethyl)-2,3-dihydrothieno [3,4-b][1,4]dioxine) [(S)-, (R)-173].

Polythiophene acetate functionalized with an enzyme rich with histidine, serine and glutamic acid units was deposited on a glassy carbon electrode (GCE) to obtain a chiral biosensor able to detect the organophosphorus pesticides. Catalytic hydrolysis of the organophosphorus pesticides led to p-nitrophenol, which was further oxidized to form nitroquinone. The electron and proton transfers in the conversion of hydroquinone to quinone appearing at modified electrode surface were recorded in the square wave voltammetry (SWV) [116].

The chiral discrimination capability of the binaphthocrown ether functionalized polythiophene 20 (Figure 27) was evaluated against the enantiomeric methyl esters of alanine (Ala-OMe⋅HCl), valine (Val-OMe⋅HCl), leucine (Leu-OMe⋅HCl), proline (Pro-OMe⋅HCl), and phenylalanine (Phe-OMe⋅HCl), which served as cationic chiral guests [40]. Complexation of the monomeric unit 19 with either l- or d-Ala-OMe⋅HCl induced planarization of the binaphthyl moiety upon guest inclusion, demonstrating that the monomer itself functions as an effective chirality-sensing host. In contrast, adding d-Ala-OMe⋅HCl to the polythiophene solution yielded distinct spectral modifications. The chiroptical changes (a hyperchromic effect in the UV-VIS spectra and a hypsochromic shift of the circular dichroism maximum) indicated that the π-conjugated polymer backbone underwent a macrostructural twisting upon guest inclusion.

Figure 27.

Figure 27

Representative chiral and achiral (poly)thiophene derivatives in host-guest type interactions.

Peptide chirality sensing by polythiophene containing a cyclodextrin pendant 36 (Figure 27) was evaluated in 50% aqueous methanol toward a series of amino acid derivatives, including phenylalanine methyl ester (Phe-OMe), tryptophan methyl ester (Trp-OMe), histidine (His), tyrosine (Tyr), and 4-nitrophenylalanine (4-NO2-Phe) as well as the dipeptides Phe-Phe, Phe-Trp, Gly-Tyr, and Tyr-Tyr. The mechanism underlying this chiroptical sensing relies on the enantiodifferentiating complexation of the guests by the pendant cyclodextrin moieties, which directly modulates the conformation of the polythiophene backbone and induces distinct UV–Vis spectral shifts [17].

Aggregates of achiral polythiophene 174 (Figure 28) showed induced CD (ICD) intensities when exposed to galactose, glucose, and fructose enantiomers in chloroform-rich media [117]. The behavior of molecular recognition (arising from non-covalent interactions) shows the potential of such supramolecular systems for detecting sugar structures.

Figure 28.

Figure 28

Representative chiral and achiral polythiophene derivatives in molecular recognition.

The chiral, regioregular (head-to-tail) (poly [3-{4-((R)-4-ethyl-2-oxazolin-2-yl)phenyl}thiophene]) (175; Figure 28) self-assembled into supramolecular chiral aggregates in poor solvents9 or in the presence of metal salts capable of coordinating to the oxazoline residues even in CHCl3. The CD studies showed a characteristic ICD in the π → π* transition region which confirmed the formation of a supramolecular chirality of the aggregates of 175. Furthermore, this chiroptical response could be reversibly controlled by the addition or removal of electrons from the polymer main chain (via redox reversible switching) [34].

The achiral polythiophene with an oxazoline residue, (poly [3-{4-(4,4-dimethyl-2-oxazolin-2-yl)phenyl}thiophene]) 176 (Figure 28) aggregated in the presence of metal salts, such as AgOTf. This process induces unique supramolecular chirality when complexed with chiral amines or in the presence of 175, resulting in observable induced circular dichroism. A plausible four-step mechanism for the chiral supramolecular aggregation of 176 in the presence of Ag(I) and chiral amines begins with the molecule adopting a helically twisted conformation, either s-cis or s-trans, from an initially random-coil state in a good solvent. The next step involves complexation with Ag(I) ions, resulting in an equal mixture of right- and left-handed helical aggregates. Further addition of chiral amines promotes the formation of predominately right- or left-handed helical aggregates.

Furthermore, supramolecular chirality is also transferred from chiral 175 to achiral 176 chains when metal salts coordinate to the oxazoline function. These supramolecular assemblies could serve as chiral materials for chiral recognition or may be employed as supramolecular chiral catalysts for asymmetric synthesis [34].

Sannicolò et al. [118] reported inherently chiral electroactive conjugated thiophene heterocycles (oligo-177) composed of 12 and 18 fully conjugated thiophene units, derived from the enantiopure building blocks (S)- and (R)-177 (Figure 29). These thiophene-based materials combine reversible potential-controlled chiroptical switching with electrochemical enantiodiscrimination.

Figure 29.

Figure 29

Chemical structures of (R)-2,2-bis-(2,2-bithiophene-5-yl)-3,3-bithianaphthene [(R)-177] (left) and (S)-2,2-bis-(2,2-bithiophene-5-yl)-3,3-bithianaphthene [(S)-177] (right) as monomers for electrodeposited heterocycles.

Thiophene-based copolymers containing a cyclodextrin pendant were found to serve as electrochemical sensors for the enantiodifferentiation of amino acid enantiomers [119]. In the design of block copolymers 178 and 179 (Figure 30), high conductivity was achieved through the polythiophene backbone, while stereoselective interactions with enantiomers (the chiral analytes) were enabled by the cyclodextrin pendant groups. Differential pulse voltammetry (DPV) was applied to study electrochemical sensing performance of the copolymer/GCE electrode systems.

Figure 30.

Figure 30

Thiophene-based copolymers 178 and 179.

Chiral poly(fluorene-co-thiophene) 180 (Figure 31) was employed as a conductive coating for TiO2 photoanodes in photoelectrochemical water splitting [120]. Compared with the corresponding achiral analogue, the chiral polymer reduced the onset potential by approximately 0.2 V while increasing both the photocurrent density and the hydrogen evolution rate by about fourfold. The photoanode of integrated polymer 180 with CdSe quantum dots initiated hydrogen evolution at 0.1 V, whereas the corresponding achiral system required 0.4 V. These results demonstrate the potential of chiral polythiophene-based conductive polymers as functional materials for photoelectrochemical hydrogen production.

Figure 31.

Figure 31

The polymers applied in the electrode construction for hydrogen production.

Doping nonchiral poly(3-hexylthiophene) with different triflate salts creates chemical-specific conductimetric responses to target gases [121]. The interaction between the analyte gas and the triflate acceptor produces distinct conductance modulation patterns, allowing the same polymer, when doped with at least two different triflates, to discriminate between water, acetone, and ethanol under ambient conditions.

4.3. Chiral Catalysis

Electropolymerized chromium salen polymers serve as stable, recyclable heterogeneous catalysts for asymmetric transformations, including hetero-Diels–Alder and Henry reactions [68] (already mentioned in Section 3.2.1 (Figure 32). Polymer 88 is the first active heterogenized chiral salen catalyst reported for asymmetric Henry reactions, with both polymer variants 88 and 89 offering excellent catalytic stability upon reuse.

Figure 32.

Figure 32

Structure of chromium salen polymers.

4.4. Magneto-Optical (MO), Electromagnetic Materials and Layers

Polythiophene-based materials have also attracted significant attention for magneto-optical and electromagnetic applications. Specifically, conjugated radical polythiophenes bearing 1,3-bisdiphenylene-2-phenylallyl (BDPA) 181 (Figure 33) units exhibit pronounced magneto-optical activity, with absolute Verdet constants reaching up to (2.80 ± 0.84) × 104 deg T−1 m−1 at 532 nm, a performance comparable to commercial inorganic materials. Moreover, the incorporation of radical moieties enables modulation of the Faraday rotation sign through the polymer’s spin state, highlighting their potency for magnetic and photonic devices [122].

Figure 33.

Figure 33

Structure of radical polythiophenes 181.

In a subsequent study, α,ω-bifunctionalized chiral polythiophenes were used as linkers to fabricate conjugated polymer/nanoparticle hybrid assemblies with alternating magnetite and metallic layers 182 (Figure 34). The failure to detect a strong nonreciprocal optical response was ascribed by Koeckelberghs et al. to high polymer polydispersity and poor intramolecular stacking, which prevented the enhancement of electric quadrupole interactions [86].

Figure 34.

Figure 34

Nanoparticle assembly featuring gold, silver, and magnetite nanoparticles connected via α,ω-bifunctionalized poly(3-((S)-3,7-dimethyloctyl)thiophene) bearing catechol and thiol end groups.

4.5. Bioactivity Evaluation

Nanoparticles derived from enantiopure (R)- and (S)-polythiophene 183 [(R)-, (S)-NPs] (Figure 35) showed excellent cytocompatibility toward mouse NIH-3T3 fibroblasts, maintaining cell viability above 70% after 24–72 h alongside distinct enantioselective behavior. Chirality-dependent responses were also observed in antibacterial assays [48]. (R)-NPs adsorbed larger amounts of serum proteins and showed greater activity against Gram-negative Escherichia coli. In contrast, (S)-NPs displayed 3–10% higher cellular uptake, stronger organelle co-localization, and higher efficacy against Gram-positive Staphylococcus aureus. Overall, the intrinsic chirality of polythiophene nanoparticles governs protein adsorption, intracellular localization, and antimicrobial activity, highlighting the potential of chiral conjugated polymeric nanoparticles as tunable platforms for bioimaging, antimicrobial materials, and targeted drug delivery.

Figure 35.

Figure 35

Enantiopure R- and S-polythiophene conjugate 183 and cationic 3-substituted polythiophene derivative 184.

The cationic polythiophene poly [3-(6′-(trimethylphosphonium)hexyl)thiophene-2,5-diyl] (184) (Figure 35) enabled continuous monitoring of HpaI endonuclease activity through induced circular dichroism (ICD), without requiring covalent labeling of the DNA substrate [123]. Enzymatic cleavage was detected as a progressive decrease and blue shift of the ICD signal, with the major spectral changes occurring within 70–100 min, in good agreement with PAGE analysis showing ~30% DNA cleavage after ~90 min. Importantly, the polymer did not diminish enzymatic activity but only moderately delayed the reaction, extending the time required to reach maximal cleavage from ~60 to ~90 min. Molecular dynamics simulations combined with CD calculations demonstrated that DNA binding induces a stable left-handed helical organization of the polymer. In contrast, DNA shortening following cleavage promotes conformational reorganization responsible for the observed chiroptical response.

5. Conclusions

Polythiophenes belong to a class of π-conjugated polymers that feature an extended system of delocalized π-electrons, which give rise to many useful electrical and optical properties. They can serve as powerful semiconducting and fluorescent materials in optoelectronic devices. The chiral π-conjugated systems effectively translate side-chain stereocenters or dynamic external templates (such as chiral liquid crystals) into higher-order helical aggregates that exhibit distinct circular dichroism (CD) and circularly polarized luminescence (CPL). The ability to tune their supramolecular organization and optical activity makes chiral polythiophenes versatile candidates for optoelectronics and asymmetric catalysis while due to their capacity for stereospecific binding, selective guest-molecule recognition, and conformational reorganization (including helical assembly), they are envisioned as chiral sensors for bioorganic and pharmaceutical applications.

Recent developments in the preparation of chiral polythiophenes have established targeted synthetic methodologies such as Pd-catalyzed cross-coupling polymerizations including Stille and Suzuki polycondensations, the RuPhos protocol (a modified Negishi coupling reaction), direct C–H coupling polymerization, along with Ni-catalyzed cross-coupling polymerizations exemplified by Kumada catalyst-transfer polycondensation (KCTP), dehydrobrominative polycondensation using a Knochel–Hauser base, and then FeCl3-mediated oxidative coupling procedure, or asymmetric electropolymerization. While FeCl3 oxidative coupling is widely used for scalable synthesis, its step-growth/free-radical-like mechanism typically yields broader dispersity (PDI > 2) and lower regioregularity; controlled chain-growth methods like KCTP or Pd-RuPhos Negishi coupling, in turn, provide precise control of the backbone regioregularity and molecular weight of polymers. Nevertheless, industrially viable methods for large-scale production must feature high regioregularity, batch-to-batch reproducibility, and low cost. Two strategies meet most of these requirements: Grignard metathesis/Kumada catalyst-transfer polycondensation and electrochemical polymerization. KCTP polymerization delivers regioregular (head-to-tail coupling) polymers with narrow dispersity and precise molecular weights. It represents a robust, industrially viable platform for the large-scale production of regioregular poly(3-hexylthiophene) (rr-P3HT). Beyond its primary role as a widely studied p-type semiconductor in organic solar cells and transistors, poly(3-hexylthiophene) has rapidly become a key functional polymer for light-actuated bioelectronic interfaces. P3HT-based functional materials offer many advantages, including tunable mechanical (stretchable, thermally stable), optical (visible, fluorescent), and electrical (good conductivity) properties, as well as biocompatibility; for this reason, they are useful as well in bioelectronic devices. Therefore, material engineering has focused on screening different morphologies, such as nanoparticles and thin films, for better integration polymers with biological components [124]. KCTP allows scalable, reproducible production of the ether side-chained polythiophenes, predominantly used for glycolated polythiophenes (e.g., oligoethylene glycol-substituted P3HT analogues used in organic electrochemical transistors). In turn, standard PEDOT is primarily manufactured on an industrial scale via oxidative polymerization (e.g., Fe(III) tosylate or persulfate) to yield PEDOT:PSS (poly(styrenesulfonate)), direct arylation polymerizations or via electropolymerization [125,126]. On the other hand, electrochemical polymerization leads to a highly crystalline material formed directly on a conductive electrode. This strategy bypasses bulk polymer synthesis, isolation, and issues with insoluble materials. Direct deposition of in situ electrooxidized polymeric layers onto transparent conductive oxides (ITO) or microelectrodes as thin, uniform films makes this one-step methodology a cost- and time-saving protocol that is directly scalable for manufacturing integrated, enantioselective (bio)sensors. Regarding future perspectives in the commercialization of chiral polythiophenes, scalable synthetic platforms, such as controlled chain-growth KCTP for processable polymers or direct electropolymerization for thin films, are expected to combine tunable chiroptical features with cost-effective manufacturing.

Author Contributions

Conceptualization, D.K., R.K. and J.D.; methodology, D.K.; software, D.K., R.K. and J.D.; formal analysis, D.K.; writing—original draft preparation, D.K., R.K. and J.D.; writing—review and editing, D.K., R.K. and J.D.; visualization, D.K.; supervision, D.K. All authors have read and agreed to the published version of the manuscript.

Data Availability Statement

No new data were created or analyzed in this study. Data sharing is not applicable to this article.

Conflicts of Interest

The authors declare no conflict of interest.

Funding Statement

This research received no external funding.

Footnotes

Disclaimer/Publisher’s Note: The statements, opinions and data contained in all publications are solely those of the individual author(s) and contributor(s) and not of MDPI and/or the editor(s). MDPI and/or the editor(s) disclaim responsibility for any injury to people or property resulting from any ideas, methods, instructions or products referred to in the content.

References

  • 1.Wang K., Xiao Y. Chirality in polythiophenes: A review. Chirality. 2021;33:424–446. doi: 10.1002/CHIR.23333. [DOI] [PubMed] [Google Scholar]
  • 2.Fichou D., editor. Handbook of Oligo- and Polythiophenes. Wiley-VCH; Weinheim, NY, USA: Chichester, UK: Brisbane, Australia: Singapore: Toronto, ON, Canada: 1999. [Google Scholar]
  • 3.Perepichka I.F., Perepichka D.F., editors. Handbook of Thiophene-Based Materials. Wiley; Hoboken, NJ, USA: 2009. [Google Scholar]
  • 4.Gao R., Meng D., Lu X. Chiral-induced spin selectivity in chiral solid-state materials for biomedical engineering. Commun. Mater. 2026;7:184. doi: 10.1038/s43246-026-01272-0. [DOI] [Google Scholar]
  • 5.McCullough R.D. The Chemistry of Conducting Polythiophenes. Adv. Mater. 1998;10:93–116. doi: 10.1002/(sici)1521-4095(199801)10:2<93::aid-adma93>3.0.co;2-f. [DOI] [Google Scholar]
  • 6.Sirringhaus H., Tessler N., Friend R.H. Integrated optoelectronic devices based on conjugated polymers. Science. 1998;280:1741–1744. doi: 10.1126/SCIENCE.280.5370.1741. [DOI] [PubMed] [Google Scholar]
  • 7.Chahma M. Doped Polythiophene Chiral Electrodes as Electrochemical Biosensors. Electrochem. 2021;2:677–688. doi: 10.3390/ELECTROCHEM2040042. [DOI] [Google Scholar]
  • 8.Kane-Maguire L.A.P., Wallace G.G. Chiral conducting polymers. Chem. Soc. Rev. 2010;39:2545–2576. doi: 10.1039/b908001p. [DOI] [PubMed] [Google Scholar]
  • 9.Ensafi A.A., Mousaabad K.Z., Fazel-Zarandi R. Application of Conductive Polymers in Electrochemistry. In: Amiri A., Hussain C.M., editors. ACS Symposium Series Conductive Polymers in Analytical Chemistry. Volume 1405. American Chemical Society; Washington, DC, USA: 2022. pp. 185–217. ACS Symposium Series. [Google Scholar]
  • 10.Wang Y., Sakamoto T., Nakano T. Molecular chirality induction to an achiral π-conjugated polymer by circularly polarized light. Chem. Commun. 2012;48:1871–1873. doi: 10.1039/C2CC17027B. [DOI] [PubMed] [Google Scholar]
  • 11.Osaka I., Mccullough R.D. Advances in molecular design and synthesis of regioregular polythiophenes. Acc. Chem. Res. 2008;41:1202–1214. doi: 10.1021/AR800130S. [DOI] [PubMed] [Google Scholar]
  • 12.Krasowska D., Karpowicz R., Drabowicz J. Chiral Polythiophenes: Part I: Syntheses of Monomeric Precursors. Molecules. 2021;26:4205. doi: 10.3390/molecules26144205. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 13.Amna B., Siddiqi H.M., Hassan A., Ozturk T. Recent developments in the synthesis of regioregular thiophene-based conjugated polymers for electronic and optoelectronic applications using nickel and palladium-based catalytic systems. RSC Adv. 2020;10:4322–4396. doi: 10.1039/c9ra09712k. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 14.Majidi M.R., Sohrabi H. Chiral Conductive Polymers. In: Amiri A., Hussain C.M., editors. ACS Symposium Series Conductive Polymers in Analytical Chemistry. Volume 1405. American Chemical Society; Washington, DC, USA: 2022. pp. 287–312. [Google Scholar]
  • 15.Subadini S., Hota P.R., Behera D.P., Sahoo H. Optical Spectroscopic and Microscopic Techniques, Analysis of Biological Molecules. Springer; Singapore: 2022. Circular Dichroism Spectroscopy: Principle and Application; pp. 19–33. [DOI] [Google Scholar]
  • 16.Langeveld-Voss B.M.W., Janssen R.A.J., Christiaans M.P.T., Meskers S.C.J., Dekkers H.P.J.M., Meijer E.W. Circular Dichroism and Circular Polarization of Photoluminescence of Highly OrderedPoly{3,4-di[(S)-2-methylbutoxy]thiophene} J. Am. Chem. Soc. 1996;118:4908–4909. doi: 10.1021/JA9600643. [DOI] [Google Scholar]
  • 17.Fukuhara G., Inoue Y. Peptide chirality sensing by a cyclodextrin-polythiophene conjugate. Chem.-Eur. J. 2012;18:11459–11464. doi: 10.1002/chem.201201294. [DOI] [PubMed] [Google Scholar]
  • 18.Bidan G., Guillerez S., Sorokin V. Chirality in regioregular and soluble polythiophene: An internal probe of conformational changes induced by minute. Adv. Mater. 1996;8:157–160. doi: 10.1002/ADMA.19960080213. [DOI] [Google Scholar]
  • 19.Ikai T., Takayama K., Wada Y., Minami S., Apiboon C., Shinohara K.I. Synthesis of a one-handed helical polythiophene: A new approach using an axially chiral bithiophene with a fixed syn-conformation. Chem. Sci. 2019;10:4890–4895. doi: 10.1039/C9SC00342H. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 20.Morisaki Y., Inoshita K., Shibata S., Chujo Y. Synthesis of optically active through-space conjugated polymers consisting of planar chiral [2.2]paracyclophane and quaterthiophene. Polym. J. 2015;47:278–281. doi: 10.1038/PJ.2014.118. [DOI] [Google Scholar]
  • 21.Akagi K., Yamashita T., Horie K., Goh M., Yamamoto M. Chiral Reaction Field with Thermally Invertible Helical Sense that Controls the Helicities of Conjugated Polymers. Adv. Mater. 2020;32:1906665. doi: 10.1002/ADMA.201906665. [DOI] [PubMed] [Google Scholar]
  • 22.Yoshida S., Morikawa S., Ueda K., Hidaka M., Kaneko K., Kaneko K., Hanasaki T., Akagi K. Photoinvertible Chiral Liquid Crystal that Affords Helicity-Controlled Aromatic Conjugated Polymers. Adv. Opt. Mater. 2020;8:2000936. doi: 10.1002/ADOM.202000936. [DOI] [Google Scholar]
  • 23.Timmermans B., Koeckelberghs G. Chiral expression of co-crystallizing poly(thiophene)- block -poly(selenophene) copolymers. Polym. Chem. 2020;11:2715–2723. doi: 10.1039/C9PY01775E. [DOI] [Google Scholar]
  • 24.Van Den Eede M.-P.P., De Winter J., Gerbaux P., Teyssandier J., De Feyter S., Van Goethem C., Vankelecom I.F.J., Koeckelberghs G. Controlled Synthesis and Supramolecular Organization of Conjugated Star-Shaped Polymers. Macromolecules. 2018;51:8689−8697. doi: 10.1021/acs.macromol.8b01777. [DOI] [Google Scholar]
  • 25.Timmermans B., Bleus D., De Winter J., Gerbaux P., Velpula G., De Feyter S., Koeckelberghs G. Influence of Heterogeneity on the Chiral Expression of Star-Shaped Conjugated Polymers. Macromolecules. 2020;53:9254–9263. doi: 10.1021/ACS.MACROMOL.0C00901. [DOI] [Google Scholar]
  • 26.Fukuhara G., Imai M., Fuentealba D., Ishida Y., Kurohara H., Yang C., Mori T., Uyama H., Bohne C., Inoue Y. Electrostatically promoted dynamic hybridization of glucans with cationic polythiophene. Org. Biomol. Chem. 2016;14:9741–9750. doi: 10.1039/C6OB01353H. [DOI] [PubMed] [Google Scholar]
  • 27.Langeveld-Voss B.M.W., Janssen R.A.J., Meijer E.W. On the origin of optical activity in polythiophenes. J. Mol. Struct. 2000;521:285–301. doi: 10.1016/S0022-2860(99)00444-5. [DOI] [Google Scholar]
  • 28.Okamoto Y., Nakano T. Asymmetric Polymerization. Chem. Rev. 1994;94:349–372. doi: 10.1021/CR00026A004. [DOI] [Google Scholar]
  • 29.Selegny E., Merle-Aubry L. General Methods of Synthesis of Optically Active Polymers. In: Selegny E., editor. Optically Active Polymers. Springer; Dordrecht, The Netherlands: 1979. pp. 15–81. [Google Scholar]
  • 30.Nilsson K.P.R., Rydberg J., Baltzer L., Inganäs O. Twisting macromolecular chains: Self-assembly of a chiral supermolecule from nonchiral polythiophene polyanions and random-coil synthetic peptides. Proc. Natl. Acad. Sci. USA. 2004;101:11197–11202. doi: 10.1073/pnas.0401853101. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 31.Nilsson K.P.R., Rydberg J., Baltzer L., Inganäs O. Self-assembly of synthetic peptides control conformation and optical properties of a zwitterionic polythiophene derivative. Proc. Natl. Acad. Sci. USA. 2003;100:10170–10174. doi: 10.1073/PNAS.1834422100. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 32.Rubio-Magnieto J., Azene E.G., Knoops J., Knippenberg S., Delcourt C., Thomas A., Richeter S., Mehdi A., Dubois P., Lazzaroni R., et al. Self-assembly and hybridization mechanisms of DNA with cationic polythiophene. Soft Matter. 2015;11:6460–6471. doi: 10.1039/C5SM01484K. [DOI] [PubMed] [Google Scholar]
  • 33.Rubio-Magnieto J., Thomas A., Richeter S., Mehdi A., Dubois P., Lazzaroni R., Clément S., Surin M. Chirality in DNA–π-conjugated polymer supramolecular structures: Insights into the self-assembly. Chem. Commun. 2013;49:5483–5485. doi: 10.1039/C3CC42108B. [DOI] [PubMed] [Google Scholar]
  • 34.Goto H., Yokochi Y., Yashima E. Chirality induction in metal-induced achiral polythiophene aggregates assisted by optically active amines and polythiophene. Chem. Commun. 2012;48:3291–3293. doi: 10.1039/C2CC17940G. [DOI] [PubMed] [Google Scholar]
  • 35.Bouman M.M., Havinga E.E., Janssen R.A.J., Meijer E.W. Chiroptical properties of regioregular chiral polythiophenes. Mol. Cryst. Liq. Cryst. Sci. Technol. Sect. A Mol. Cryst. Liq. Cryst. 1994;256:439–448. doi: 10.1080/10587259408039274. [DOI] [Google Scholar]
  • 36.Ochiai K., Tabuchi Y., Rikukawa M., Sanui K., Ogata N. Fabrication of chiral poly(thiophene) Langmuir–Blodgett films. Thin Solid Films. 1998;327–329:454–457. doi: 10.1016/S0040-6090(98)00685-3. [DOI] [Google Scholar]
  • 37.Ochiai K., Rikukawa M., Sanui K., Ogata N., Ueno Y., Ema K. Structure and properties of chiral poly(3-substituted thiophene) langmuir-blodgett films. Synth. Met. 1999;101:84–85. doi: 10.1016/S0379-6779(98)01195-3. [DOI] [Google Scholar]
  • 38.Andreani F., Angiolini L., Caretta D., Salatelli E. Synthesis and polymerization of 3,3″-di[(S)-(+)-2-methylbutyl]-2,2′:5′,2″-terthiophene: A new monomer precursor to chiral regioregular poly(thiophene) J. Mater. Chem. 1998;8:1109–1111. doi: 10.1039/A801593G. [DOI] [Google Scholar]
  • 39.Iarossi D., Mucci A., Parenti F., Schenetti L., Seeber R., Zanardi C., Forni A., Tonelli M. Synthesis and Spectroscopic and Electrochemical Characterisation of a Conducting Polythiophene Bearing a Chiralβ-Substituent: Polymerisation of (+)-4,4′-Bis[(S)-2-methylbutylsulfanyl]-2,2′-bithiophene. Chemistry. 2001;7:676–685. doi: 10.1002/1521-3765(20010202)7:3<676::AID-CHEM676>3.0.CO;2-2. [DOI] [PubMed] [Google Scholar]
  • 40.Fukuhara G., Inoue Y. Chirality-sensing binaphthocrown ether-polythiophene conjugate. Chem.-Eur. J. 2010;16:7859–7864. doi: 10.1002/CHEM.200903545. [DOI] [PubMed] [Google Scholar]
  • 41.Grolleau J., Legoupy S., Frère P., Gohier F. Synthesis via direct (hetero)arylation polymerization, electrochemical and optical properties of poly (3,4-disubstituted)thiophenes. Polymer. 2019;182:121811. doi: 10.1016/j.polymer.2019.121811. [DOI] [Google Scholar]
  • 42.Wang Q., Takita R., Kikuzaki Y., Ozawa F. Palladium-catalyzed dehydrohalogenative polycondensation of 2-bromo-3-hexylthiophene: An efficient approach to head-to-tail poly(3-hexylthiophene) J. Am. Chem. Soc. 2010;132:11420–11421. doi: 10.1021/JA105767Z. [DOI] [PubMed] [Google Scholar]
  • 43.Wang Q., Wakioka M., Ozawa F. Synthesis of end-capped regioregular poly(3-hexylthiophene)s via direct arylation. Macromol. Rapid Commun. 2012;33:1203–1207. doi: 10.1002/MARC.201200076. [DOI] [PubMed] [Google Scholar]
  • 44.Wakioka M., Ozawa F. Highly Efficient Catalysts for Direct Arylation Polymerization (DArP) Asian J. Org. Chem. 2018;7:1206–1216. doi: 10.1002/AJOC.201800227. [DOI] [Google Scholar]
  • 45.Deng L., Zhang Q., Zhao L., Lu Y. Direct C-H coupling polymerization of asymmetric monomer: Synthesis and properties of regioregular poly(alkyl thiophene-3-carboxylates) Eur. Polym. J. 2018;109:72–81. doi: 10.1016/J.EURPOLYMJ.2018.09.001. [DOI] [Google Scholar]
  • 46.Stille J.K. The Palladium-Catalyzed Cross-Coupling Reactions of Organotin Reagents with Organic Electrophiles [New Synthetic Methods (58)] Angew. Chem. Int. Ed. 1986;25:508–524. doi: 10.1002/ANIE.198605081. [DOI] [Google Scholar]
  • 47.Ohkawa S., Yang F., Kawabata K., Goto H. Synthesis of polymers from chiral monomers in chiral liquid crystals. J. Appl. Polym. Sci. 2013;128:3586–3591. doi: 10.1002/app.38561. [DOI] [Google Scholar]
  • 48.Palamà I.E., Di Maria F., Zangoli M., D’amone S., Manfredi G., Barsotti J., Lanzani G., Ortolani L., Salatelli E., Gigli G., et al. Enantiopure polythiophene nanoparticles. Chirality dependence of cellular uptake, intracellular distribution and antimicrobial activity. RSC Adv. 2019;9:23036–23044. doi: 10.1039/C9RA04782D. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 49.Loewe R.S., Khersonsky S.M., McCullough R.D. A Simple Method to Prepare Head-to-Tail Coupled, Regioregular Poly(3-alkylthiophenes) Using Grignard Metathesis. Adv. Mater. 1999;11:250–253. doi: 10.1002/(SICI)1521-4095(199903)11:3<250::AID-ADMA250>3.0.CO;2-J. [DOI] [Google Scholar]
  • 50.Yokoyama A., Miyakoshi R., Yokozawa T. Chain-Growth Polymerization for Poly(3-hexylthiophene) with a Defined Molecular Weight and a Low Polydispersity. Macromolecules. 2004;37:1169–1171. doi: 10.1021/MA035396O. [DOI] [Google Scholar]
  • 51.Yokoyama A., Yokozawa T. Converting step-growth to chain-growth condensation polymerization. Macromolecules. 2007;40:4093–4101. doi: 10.1021/MA061357B. [DOI] [Google Scholar]
  • 52.Marinelli M., Angiolini L., Lanzi M., Di Maria F., Salatelli E. Effect of regioregularity and role of heteroatom on the chiral behavior of oligo(heteroalkyl thiophene)s. Chirality. 2020;32:1361–1376. doi: 10.1002/chir.23282. [DOI] [PubMed] [Google Scholar]
  • 53.Ma J., Geng Y., Hashimoto K., Tajima K. Synthesis and Characterization of End-Functionalized Poly(3-butylthiophene) with Semifluoroalkyl Chains. Macromol. Chem. Phys. 2013;214:1326–1331. doi: 10.1002/macp.201300081. [DOI] [Google Scholar]
  • 54.Wang F., Nakano K., Segawa H., Tajima K. Inversion of Circular Dichroism Signals in Chiral Polythiophene Films Induced by End-On-Oriented Surface-Segregated Monolayers. ACS Appl. Mater. Interfaces. 2021;13:7510–7516. doi: 10.1021/acsami.0c22099. [DOI] [PubMed] [Google Scholar]
  • 55.Otaki M., Komaba K., Goto H. Synthesis of Polythiophene-Based Chiral Magnetic Block Copolymers with High Stereoregularity. ACS Appl. Polym. Mater. 2023;5:311–319. doi: 10.1021/ACSAPM.2C01524. [DOI] [Google Scholar]
  • 56.Tamba S., Mitsuda S., Tanaka F., Sugie A., Mori A. Studies on the generation of metalating species equivalent to the Knochel-Hauser base in the dehydrobrominative polymerization of thiophene derivatives. Organometallics. 2012;31:2263–2267. doi: 10.1021/OM201209Z. [DOI] [Google Scholar]
  • 57.Wang P., Jeon I., Lin Z., Peeks M.D., Savagatrup S., Kooi S.E., Van Voorhis T., Swager T.M. Insights into Magneto-Optics of Helical Conjugated Polymers. J. Am. Chem. Soc. 2018;140:6501–6508. doi: 10.1021/jacs.8b03777. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 58.Willot P., Steverlynck J., Moerman D., Leclère P., Lazzaroni R., Koeckelberghs G. Poly(3-alkylthiophene) with tuneable regioregularity: Synthesis and self-assembling properties. Polym. Chem. 2013;4:2662–2671. doi: 10.1039/C3PY00236E. [DOI] [Google Scholar]
  • 59.Verheyen L., De Winter J., Gerbaux P., Koeckelberghs G. Effect of the Nature and the Position of Defects on the Chiral Expression in Poly(3-alkylthiophene)s. Macromolecules. 2019;52:8587–8595. doi: 10.1021/acs.macromol.9b01858. [DOI] [Google Scholar]
  • 60.Barbarella G., Bongini A., Zambianchi M. Regiochemistry and Conformation of Poly(3-hexylthiophene) via the Synthesis and the Spectroscopic Characterization of the Model Configurational Triads. Macromolecules. 1994;27:3039–3045. doi: 10.1021/MA00089A022. [DOI] [Google Scholar]
  • 61.Minami T., Kubo Y. Selective anion-induced helical aggregation of chiral amphiphilic polythiophenes with isothiouronium-appended pendants. Supramol. Chem. 2011;23:13–18. doi: 10.1080/10610278.2010.506546. [DOI] [Google Scholar]
  • 62.Krasowska D., Wysocki S., Janicka M., Girek T., Mielniczak A., Drabowicz J. Chiral polymers based on thiophenes functionalized at the 3-position with a pendant containing a stereogenic sulfur atom. Synthetic and structural aspects. Polym. Chem. 2021;12:1707–1719. doi: 10.1039/D1PY00067E. [DOI] [Google Scholar]
  • 63.Roncali J., Garreau R., Delabouglise D., Garnier F., Lemaire M. Recent developments in the synthesis and functionalization of conducting poly(thiophenes) Makromol. Chemie. Macromol. Symp. 1988;20–21:601–614. doi: 10.1002/MASY.19880200159. [DOI] [Google Scholar]
  • 64.Lemaire M., Delabouglise D., Garreau R., Guy A., Roncali J. Enantioselective chiral poly(thiophenes) J. Chem. Soc. Chem. Commun. 1988;24:658–661. doi: 10.1039/C39880000658. [DOI] [Google Scholar]
  • 65.Kotkar D., Joshi V., Ghosh P.K. Towards chiral metals. Synthesis of chiral conducting polymers from optically active thiophene and pyrrole derivatives. J. Chem. Soc. Chem. Commun. 1988;24:917–918. doi: 10.1039/C39880000917. [DOI] [Google Scholar]
  • 66.Mctiernan C.D., Omri K., Chahma M. Chiral Conducting Surfaces via Electrochemical Oxidation of L-Leucine-Oligothiophenes. J. Org. Chem. 2010;75:6096–6103. doi: 10.1021/jo100722v. [DOI] [PubMed] [Google Scholar]
  • 67.McTiernan C.D., Chahma M. Synthesis and characterization of alanine functionalized oligo/polythiophenes. New J. Chem. 2010;34:1417–1423. doi: 10.1039/C0NJ00016G. [DOI] [Google Scholar]
  • 68.Zulauf A.A., Hong X., Brisset F.F., Schulz E., Mellah M. Electropolymerization of chiral chromium–salen complexes: New materials for heterogeneous asymmetric catalysis. New J. Chem. 2012;36:1399–1407. doi: 10.1039/c2nj21011h. [DOI] [Google Scholar]
  • 69.Tassinari F., Amsallem D., Bloom B.P., Lu Y., Bedi A., Waldeck D.H., Gidron O., Naaman R. Spin-Dependent Enantioselective Electropolymerization. J. Phys. Chem. C. 2020;124:20974–20980. doi: 10.1021/ACS.JPCC.0C06238. [DOI] [Google Scholar]
  • 70.Matsushita S., Jeong Y.S., Akagi K. Electrochromism-driven linearly and circularly polarised dichroism of poly(3,4-ethylenedioxythiophene) derivatives with chirality and liquid crystallinity. Chem. Commun. 2013;49:1883–1890. doi: 10.1039/c2cc37116b. [DOI] [PubMed] [Google Scholar]
  • 71.Matsushita S., Yan B., Yamamoto S., Jeong Y.S., Akagi K. Helical Carbon and Graphite Films Prepared from Helical Poly(3,4-ethylenedioxythiophene) Films Synthesized by Electrochemical Polymerization in Chiral Nematic Liquid Crystals. Angew. Chem. Int. Ed. 2014;53:1659–1663. doi: 10.1002/ANIE.201308462. [DOI] [PubMed] [Google Scholar]
  • 72.Yamakawa S., Wada K., Hidaka M., Hanasaki T., Akagi K. Chiral Liquid-Crystalline Ionic Liquid Systems Useful for Electrochemical Polymerization that Affords Helical Conjugated Polymers. Adv. Funct. Mater. 2019;29:1806592. doi: 10.1002/ADFM.201806592. [DOI] [Google Scholar]
  • 73.Goto H., Akagi K. Preparation of poly(3,4-ethylenedioxythiophene) in a chiral nematic liquid-crystal field. Macromol. Rapid Commun. 2004;25:1482–1486. doi: 10.1002/MARC.200400184. [DOI] [Google Scholar]
  • 74.Goto H. Vortex fibril structure and chiroptical electrochromic effect of optically active poly(3,4-ethylenedioxythiophene) (PEDOT*) prepared by chiral transcription electrochemical polymerisation in cholesteric liquid crystal. J. Mater. Chem. 2009;19:4914–4921. doi: 10.1039/B818993E. [DOI] [Google Scholar]
  • 75.Kawabata K., Takeguchi M., Goto H. Optical Activity of Heteroaromatic Conjugated Polymer Films Prepared by Asymmetric Electrochemical Polymerization in Cholesteric Liquid Crystals: Structural Function for Chiral Induction. Macromolecules. 2013;46:2078–2091. doi: 10.1021/ma400302j. [DOI] [Google Scholar]
  • 76.Yoneyama H., Tsujimoto A., Goto H. Preparation of Optically Active Pyridine-Based Conducting Polymer Films Using a Liquid Crystal Electrolyte Containing a Cholesterol Derivative. Macromolecules. 2007;40:5279–5283. doi: 10.1021/MA070247H. [DOI] [Google Scholar]
  • 77.Goto H., Nimori S. Liquid crystal electropolymerisation under magnetic field and resultant linear polarised electrochromism. J. Mater. Chem. 2010;20:1891–1898. doi: 10.1039/B920983B. [DOI] [Google Scholar]
  • 78.Iseki T., Kawabata K., Nimori S., Goto H. Synthesis of chiral inducers having double stereogenic centers for electrochemical polymerization in cholesteric liquid crystal medium. Synth. Met. 2014;187:217–223. doi: 10.1016/J.SYNTHMET.2013.11.017. [DOI] [Google Scholar]
  • 79.Goto H., Kawabata K. Light driven asymmetric polymerization: An approach for tele-control reaction. Polym. Chem. 2011;2:1098–1106. doi: 10.1039/C0PY00396D. [DOI] [Google Scholar]
  • 80.Matsumura A., Yang F., Goto H. Synthesis of a Terpene-Based New Chiral Inducer and Preparation of an Asymmetric Polymer. Polymers. 2015;7:147–155. doi: 10.3390/POLYM7010147. [DOI] [Google Scholar]
  • 81.Matsumura A., Fan Y., Goto H. Asymmetric electrochemical polymerization in cholesteric liquid crystalline media: Effect of isomeric structures of chiral inducers containing bornyl group. Synth. Met. 2015;202:157–164. doi: 10.1016/J.SYNTHMET.2015.01.019. [DOI] [Google Scholar]
  • 82.Hayashi H., Wang A., Kawabata K., Goto H. Helical twisting power of three-ring chiral molecules and polymerization in cholesteric electrolyte solutions. Mater. Chem. Phys. 2013;137:816–824. doi: 10.1016/J.MATCHEMPHYS.2012.10.017. [DOI] [Google Scholar]
  • 83.Eguchi N., Kawabata K., Goto H. Chiral-Electroactive Low-Bandgap Polymer Composite. J. Mater. Sci. Chem. Eng. 2017;5:1–10. doi: 10.4236/msce.2017.52001. [DOI] [Google Scholar]
  • 84.Goto H. Reaction field induction self-amplification optical activity during polymerization in liquid crystal. Mol. Cryst. Liq. Cryst. 2022;745:26–39. doi: 10.1080/15421406.2022.2073421. [DOI] [Google Scholar]
  • 85.Hirose D., Nozaki S., Kanoh S., Maeda K. Synthesis of Amphiphilic Block Copolymers Containing Chiral Polythiophene Chains and Their Micelle Formation and Chiroptical Properties. Polymers. 2018;10:718. doi: 10.3390/POLYM10070718. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 86.Delabie J., De Winter J., Deschaume O., Bartic C., Gerbaux P., Verbiest T., Koeckelberghs G. Development of a Layered Hybrid Nanocomposite Material Using α,ω-Bifunctionalized Polythiophenes. Macromolecules. 2020;53:11098–11105. doi: 10.1021/ACS.MACROMOL.0C01593. [DOI] [Google Scholar]
  • 87.Van Den Eede M.P., Bedi A., Delabie J., De Winter J., Gerbaux P., Koeckelberghs G. The influence of the end-group on the chiral self-assembly of all-conjugated block copolymers. Polym. Chem. 2017;8:5666–5672. doi: 10.1039/C7PY01043E. [DOI] [Google Scholar]
  • 88.Verswyvel M., Goossens K., Koeckelberghs G. Amphiphilic chiral block-poly(thiophene)s: Tuning the blocks. Polym. Chem. 2013;4:5310–5320. doi: 10.1039/C3PY00133D. [DOI] [Google Scholar]
  • 89.Liu N., Gao R.T., Wu Z.Q. Helix-Induced Asymmetric Self-Assembly of π-Conjugated Block Copolymers: From Controlled Syntheses to Distinct Properties. Acc. Chem. Res. 2023;56:2954–2967. doi: 10.1021/ACS.ACCOUNTS.3C00425. [DOI] [PubMed] [Google Scholar]
  • 90.Bao Z., Chan W., Yu L. Synthesis of Conjugated Polymer by the Stille Coupling Reaction. Chem. Mater. 1993;5:2–3. doi: 10.1021/CM00025A001. [DOI] [Google Scholar]
  • 91.Yu L., Bao Z., Cai R. Conjugated, Liquid Crystalline Polymers. Angew. Chem. Int. Ed. 1993;32:1345–1347. doi: 10.1002/ANIE.199313451. [DOI] [Google Scholar]
  • 92.Fronk S.L., Shi Y., Siefrid M., Mai C.K., McDowell C., Bazan G.C. Chiroptical Properties of a Benzotriazole-Thiophene Copolymer Bearing Chiral Ethylhexyl Side Chains. Macromolecules. 2016;49:9301–9308. doi: 10.1021/ACS.MACROMOL.6B02229. [DOI] [Google Scholar]
  • 93.Cho M.J., Ahn J.S., Kim Y.U., Um H.A., Prasad P.N., Lee G.J., Choi D.H. New fluorene-based chiral copolymers with unusually high optical activity in pristine and annealed thin films. RSC Adv. 2016;6:23879–23886. doi: 10.1039/C5RA26523A. [DOI] [Google Scholar]
  • 94.Okuda H., Koyama Y., Uchida S., Michinobu T., Sogawa H., Takata T. Reversible transformation of a one-handed helical foldamer utilizing a planarity-switchable spacer and C 2-chiral spirobifluorene units. ACS Macro Lett. 2015;4:462–466. doi: 10.1021/ACSMACROLETT.5B00176. [DOI] [PubMed] [Google Scholar]
  • 95.Wang A., Kawabata K., Goto H. Thiophene-based chiral small bandgap π-conjugated polymers: Synthesis and optical properties. Des. Monomers Polym. 2015;18:360–366. doi: 10.1080/15685551.2015.1012625. [DOI] [Google Scholar]
  • 96.Watanabe K., Osaka I., Yorozuya S., Akagi K. Helically π-stacked thiophene-based copolymers with circularly polarized fluorescence: High dissymmetry factors enhanced by self-ordering in chiral nematic liquid crystal phase. Chem. Mater. 2012;24:1011–1024. doi: 10.1021/CM2028788. [DOI] [Google Scholar]
  • 97.Hirahara T., Yoshizawa-Fujita M., Takeoka Y., Rikukawa M. Highly Efficient Circularly Polarized Light Emission in the Green Region from Chiral Polyfluorene–Thiophene Thin Films. Chem. Lett. 2012;41:905–907. doi: 10.1246/CL.2012.905. [DOI] [Google Scholar]
  • 98.Hirahara T., Yoshizawa-Fujita M., Takeoka Y., Rikukawa M. Optical properties of polyfluorene–thiophene copolymers having chiral side chains. Synth. Met. 2009;159:2180–2183. doi: 10.1016/J.SYNTHMET.2009.08.026. [DOI] [Google Scholar]
  • 99.Yang X., Seo S., Park C., Kim E. Electrical chiral assembly switching of soluble conjugated polymers from propylenedioxythiophene-phenylene copolymers. Macromolecules. 2014;47:7043–7051. doi: 10.1021/MA501059Z. [DOI] [Google Scholar]
  • 100.McTiernan C.D., Chahma M. Chiral conducting surfaces based on the electropolymerization of 3,4-ethylenedioxythiophene. Synth. Met. 2011;161:1532–1536. doi: 10.1016/J.SYNTHMET.2011.05.009. [DOI] [Google Scholar]
  • 101.Schenck C.L., Nadeau J.M. Synthesis and redox properties of racemic electroactive polymers containing axially chiral adamantyl segments. Tetrahedron. 2010;66:462–466. doi: 10.1016/j.tet.2009.11.023. [DOI] [Google Scholar]
  • 102.Kawagoe Y., Fujiki M., Nakano Y. Limonene magic: Noncovalent molecular chirality transfer leading to ambidextrous circularly polarised luminescent π-conjugated polymers. New J. Chem. 2010;34:637–647. doi: 10.1039/B9NJ00733D. [DOI] [Google Scholar]
  • 103.Fujiki M., Yoshimoto S. Time-evolved, far-red, circularly polarised luminescent polymer aggregates endowed with sacrificial helical Si–Si bond polymers. Mater. Chem. Front. 2017;1:1773–1785. doi: 10.1039/C7QM00096K. [DOI] [Google Scholar]
  • 104.Kitao T., Nagasaka Y., Karasawa M., Eguchi T., Kimizuka N., Ishii K., Yamada T., Uemura T. Transcription of chirality from metal–organic framework to polythiophene. J. Am. Chem. Soc. 2019;141:19565–19569. doi: 10.1021/JACS.9B10880. [DOI] [PubMed] [Google Scholar]
  • 105.Togashi F., Ohta R., Goto H. Cholesteric medium inductive asymmetric polymerization: Preparation of optically active polythiophene derivatives from achiral monomers in cholesteric liquid crystals. Tetrahedron Lett. 2007;48:2559–2562. doi: 10.1016/J.TETLET.2007.02.025. [DOI] [Google Scholar]
  • 106.Goto H., Akagi K. Optically active conjugated polymers prepared from achiral monomers by polycondensation in a chiral nematic solvent. Angew. Chem. Int. Ed. 2005;44:4322–4328. doi: 10.1002/ANIE.200462859. [DOI] [PubMed] [Google Scholar]
  • 107.Risteen B.E., Blake A., McBride M.A., Rosu C., Park J.O., Srinivasarao M., Russo P.S., Reichmanis E. Enhanced Alignment of Water-Soluble Polythiophene Using Cellulose Nanocrystals as a Liquid Crystal Template. Biomacromolecules. 2017;18:1556–1562. doi: 10.1021/ACS.BIOMAC.7B00121. [DOI] [PubMed] [Google Scholar]
  • 108.Ito R., Yonehara T., Goto H. Synthesis of a series of optically active polythiophene derivatives bearing myrtanoxy group. Polym. Technol. Mater. 2021;60:1308–1316. doi: 10.1080/25740881.2021.1888992. [DOI] [Google Scholar]
  • 109.Yatsu A., Yonehara T., Goto H. Preparation of poly(thiophene-alt-pyrrole) bearing chiral LC group. Polym. Technol. Mater. 2021;60:226–232. doi: 10.1080/25740881.2020.1793198. [DOI] [Google Scholar]
  • 110.Wang C., Xu L., Zhou L., Liu N., Wu Z.Q. Asymmetric Living Supramolecular Polymerization: Precise Fabrication of One-Handed Helical Supramolecular Polymers. Angew. Chem. Int. Ed. 2022;61:e202207028. doi: 10.1002/ANIE.202207028. [DOI] [PubMed] [Google Scholar]
  • 111.Goto H., Okamoto Y., Yashima E. Solvent-induced chiroptical changes in supramolecular assemblies of an optically active, regioregular polythiophene. Macromolecules. 2002;35:4590–4601. doi: 10.1021/ma012083p. [DOI] [Google Scholar]
  • 112.Trojanowicz M. Enantioselective electrochemical sensors and biosensors: A mini-review. Electrochem. Commun. 2014;38:47–52. doi: 10.1016/J.ELECOM.2013.10.034. [DOI] [Google Scholar]
  • 113.Hu D., Lu B., Duan X., Xu J., Zhang L., Zhang K., Zhang S., Zhen S. Synthesis of novel chiral l-leucine grafted PEDOT derivatives with excellent electrochromic performances. RSC Adv. 2014;4:35597–35608. doi: 10.1039/C4RA05075D. [DOI] [Google Scholar]
  • 114.Dong L., Zhang Y., Duan X., Zhu X., Sun H., Xu J. Chiral PEDOT-Based Enantioselective Electrode Modification Material for Chiral Electrochemical Sensing: Mechanism and Model of Chiral Recognition. Anal. Chem. 2017;89:9695–9702. doi: 10.1021/ACS.ANALCHEM.7B01095. [DOI] [PubMed] [Google Scholar]
  • 115.Dong L., Zhang L., Duan X., Mo D., Xu J., Zhu X. Synthesis and characterization of chiral PEDOT enantiomers bearing chiral moieties in side chains: Chiral recognition and its mechanism using electrochemical sensing technology. RSC Adv. 2016;6:11536–11545. doi: 10.1039/C5RA20871H. [DOI] [Google Scholar]
  • 116.Liu Y., Cao X., Liu Z., Sun L., Fang G., Liu J., Wang S. Electrochemical detection of organophosphorus pesticides based on amino acids-conjugated P3TAA-modified electrodes. Analyst. 2021;145:8068–8076. doi: 10.1039/D0AN01838D. [DOI] [PubMed] [Google Scholar]
  • 117.Shiraki T., Dawn A., Tsuchiya Y., Yamamoto T., Shinkai S. Unexpected chiral induction from achiral cationic polythiophene aggregates and its application to the sugar pattern recognition. Chem. Commun. 2012;48:7091–7093. doi: 10.1039/C2CC33162D. [DOI] [PubMed] [Google Scholar]
  • 118.Sannicolò F., Arnaboldi S., Benincori T., Bonometti V., Cirilli R., Dunsch L., Kutner W., Longhi G., Mussini P.R., Panigati M., et al. Potential-Driven Chirality Manifestations and Impressive Enantioselectivity by Inherently Chiral Electroactive Organic Films†. Angew. Chem. Int. Ed. 2014;53:2623–2627. doi: 10.1002/ANIE.201309585. [DOI] [PubMed] [Google Scholar]
  • 119.Gao H., Lu Z., Xiao Y. An electrochemical chiral sensor for amino acids based on cyclodextrin modified thiophene-based copolymer. Carbohydr. Polym. 2022;297:120012. doi: 10.1016/J.CARBPOL.2022.120012. [DOI] [PubMed] [Google Scholar]
  • 120.Tassinari F., Banerjee-Ghosh K., Parenti F., Kiran V., Mucci A., Naaman R. Enhanced Hydrogen Production with Chiral Conductive Polymer-Based Electrodes. J. Phys. Chem. C. 2017;121:15777–15783. doi: 10.1021/ACS.JPCC.7B04194. [DOI] [PubMed] [Google Scholar]
  • 121.Boujnah A., Boubaker A., Kalboussi A., Lmimouni K., Pecqueur S. Mildly-doped polythiophene with triflates for molecular recognition. Synth. Met. 2021;280:116890. doi: 10.1016/J.SYNTHMET.2021.116890. [DOI] [Google Scholar]
  • 122.Wang P., Lin S., Lin Z., Peeks M.D., Van Voorhis T., Swager T.M. A Semiconducting Conjugated Radical Polymer: Ambipolar Redox Activity and Faraday Effect. J. Am. Chem. Soc. 2018;140:10881–10889. doi: 10.1021/JACS.8B06193. [DOI] [PubMed] [Google Scholar]
  • 123.Fossépré M., Trévisan M.E., Cyriaque V., Wattiez R., Beljonne D., Richeter S., Clément S., Surin M. Detection of the Enzymatic Cleavage of DNA through Supramolecular Chiral Induction to a Cationic Polythiophene. ACS Appl. Bio Mater. 2019;2:2125–2136. doi: 10.1021/ACSABM.9B00123. [DOI] [PubMed] [Google Scholar]
  • 124.Abdel Aziz I., Tullii G., Antognazza M.R., Criado-Gonzalez M. Poly(3-hexylthiophene) as a versatile semiconducting polymer for cutting-edge bioelectronics. Mater. Horiz. 2025;12:5570–5593. doi: 10.1039/D5MH00096C. [DOI] [PMC free article] [PubMed] [Google Scholar]
  • 125.Ding B., Le V., Yu H., Wu G., Marsh A.V., Gutiérrez-Fernández E., Ramos N., Rimmele M., Martín J., Nelson J., et al. Development of Synthetically Accessible Glycolated Polythiophenes for High-Performance Organic Electrochemical Transistors. Adv. Electron. Mater. 2024;10:2300580. doi: 10.1002/AELM.202300580. [DOI] [Google Scholar]
  • 126.Yelshibay A., Bukari S.D., Baptayev B., Balanay M.P. Conducting Polymers in Solar Cells: Insights, Innovations, and Challenges. Organics. 2024;5:640–669. doi: 10.3390/ORG5040034. [DOI] [Google Scholar]

Associated Data

This section collects any data citations, data availability statements, or supplementary materials included in this article.

Data Availability Statement

No new data were created or analyzed in this study. Data sharing is not applicable to this article.


Articles from International Journal of Molecular Sciences are provided here courtesy of Multidisciplinary Digital Publishing Institute (MDPI)

RESOURCES